kernel/mediatek: 6.12: adapt for changed MMC card binding

Adapt patches adding NVMEM or fitblk rootdisk references to MMC
partitions for the changed MMC card binding.

Note that boards in 'dts' folder can only be converted once Linux 6.6,
which still depends on the old binding, has been dropped.

Signed-off-by: Daniel Golle <[email protected]>

target/linux/mediatek/patches-6.12/164-dts-mt7623-bpi-r2-rootdisk-for-fitblk.patch

@@ -11,7 +11,7 @@
  	};
  
  	connector {
-@@ -338,6 +340,22 @@
+@@ -338,6 +340,20 @@
  	vmmc-supply = <&reg_3p3v>;
  	vqmmc-supply = <&reg_1p8v>;
  	non-removable;
@@ -22,19 +22,17 @@
 +		compatible = "mmc-card";
 +		reg = <0>;
 +
-+		block {
-+			compatible = "block-device";
-+			partitions {
-+				emmc_rootdisk: block-partition-fit {
-+					partno = <3>;
-+				};
++		partitions {
++			compatible = "msdos-partitions";
++			emmc_rootdisk: block-partition-fit {
++				partno = <3>;
 +			};
 +		};
 +	};
  };
  
  &mmc1 {
-@@ -351,6 +369,22 @@
+@@ -351,6 +367,20 @@
  	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
  	vmmc-supply = <&reg_3p3v>;
  	vqmmc-supply = <&reg_3p3v>;
@@ -45,12 +43,10 @@
 +		compatible = "mmc-card";
 +		reg = <0>;
 +
-+		block {
-+			compatible = "block-device";
-+			partitions {
-+				sd_rootdisk: block-partition-fit {
-+					partno = <3>;
-+				};
++		partitions {
++			compatible = "msdos-partitions";
++			sd_rootdisk: block-partition-fit {
++				partno = <3>;
 +			};
 +		};
 +	};

target/linux/mediatek/patches-6.12/195-dts-mt7986a-bpi-r3-leds-port-names-and-wifi-eeprom.patch

@@ -11,7 +11,7 @@
  	};
  
  	chosen {
-@@ -419,27 +423,27 @@
+@@ -418,27 +422,27 @@
  
  		port@1 {
  			reg = <1>;
@@ -44,7 +44,7 @@
  			phy-mode = "2500base-x";
  			sfp = <&sfp2>;
  			managed = "in-band-status";
-@@ -490,9 +494,137 @@
+@@ -489,9 +493,137 @@
  
  &wifi {
  	status = "okay";
@@ -187,10 +187,10 @@
 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
 +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
 @@ -55,6 +55,7 @@
- 					partition@c00000 {
- 						label = "fit";
- 						reg = <0xc00000 0x1400000>;
-+						compatible = "denx,fit";
- 					};
- 				};
+ 			partition@c00000 {
+ 				label = "fit";
+ 				reg = <0xc00000 0x1400000>;
++				compatible = "denx,fit";
  			};
+ 		};
+ 	};

target/linux/mediatek/patches-6.12/196-dts-mt7986a-bpi-r3-use-all-ubi-nand-layout.patch

@@ -1,135 +1,115 @@
 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
 +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
-@@ -23,7 +23,29 @@
- 			no-sd;
- 			no-sdio;
- 			status = "okay";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
+@@ -21,5 +21,24 @@
+ 	non-removable;
+ 	no-sd;
+ 	no-sdio;
++	#address-cells = <1>;
++	#size-cells = <0>;
+ 	status = "okay";
 +
-+			card@0 {
-+				compatible = "mmc-card";
-+				reg = <0>;
++	card@0 {
++		compatible = "mmc-card";
++		reg = <0>;
 +
-+				block {
-+					compatible = "block-device";
-+					partitions {
-+						emmc_rootdisk: block-partition-production {
-+							partname = "production";
-+						};
-+					};
-+				};
++		partitions {
++			compatible = "gpt-partitions";
++
++			emmc_rootdisk: block-partition-production {
++				partname = "production";
 +			};
- 		};
- 	};
--};
- 
-+	fragment@1 {
-+		target-path = "/chosen";
-+		__overlay__ {
-+			rootdisk-emmc = <&emmc_rootdisk>;
 +		};
 +	};
 +};
++
++&{/chosen} {
++	rootdisk-emmc = <&emmc_rootdisk>;
+ };
 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
 +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
-@@ -29,27 +29,30 @@
+@@ -29,25 +29,24 @@
  
- 					partition@0 {
- 						label = "bl2";
--						reg = <0x0 0x100000>;
-+						reg = <0x0 0x200000>;
- 						read-only;
- 					};
+ 			partition@0 {
+ 				label = "bl2";
+-				reg = <0x0 0x100000>;
+-				read-only;
++				reg = <0x0 0x200000>;
+ 			};
  
--					partition@100000 {
--						label = "reserved";
--						reg = <0x100000 0x280000>;
--					};
+-			partition@100000 {
+-				label = "reserved";
+-				reg = <0x100000 0x280000>;
+-			};
 -
--					partition@380000 {
--						label = "fip";
--						reg = <0x380000 0x200000>;
--						read-only;
--					};
+-			partition@380000 {
+-				label = "fip";
+-				reg = <0x380000 0x200000>;
+-				read-only;
+-			};
 -
--					partition@580000 {
-+					partition@200000 {
- 						label = "ubi";
--						reg = <0x580000 0x7a80000>;
-+						reg = <0x200000 0x7e00000>;
-+						compatible = "linux,ubi";
+-			partition@580000 {
++			partition@200000 {
+ 				label = "ubi";
+-				reg = <0x580000 0x7a80000>;
++				reg = <0x200000 0x7e00000>;
++				compatible = "linux,ubi";
 +
-+						volumes {
-+							nand_rootdisk: ubi-volume-fit {
-+								volname = "fit";
-+							};
-+						};
- 					};
- 				};
++				volumes {
++					nand_rootdisk: ubi-volume-fit {
++						volname = "fit";
++					};
++				};
  			};
  		};
  	};
-+
-+	fragment@1 {
-+		target-path = "/chosen";
-+		__overlay__ {
-+			rootdisk-spim-nand = <&nand_rootdisk>;
-+		};
-+	};
  };
++
++&{/chosen} {
++	rootdisk-spim-nand = <&nand_rootdisk>;
++};
 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
 +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
 @@ -52,7 +52,7 @@
- 						reg = <0x180000 0xa80000>;
- 					};
- 
--					partition@c00000 {
-+					nor_rootdisk: partition@c00000 {
- 						label = "fit";
- 						reg = <0xc00000 0x1400000>;
- 						compatible = "denx,fit";
-@@ -61,4 +61,11 @@
+ 				reg = <0x180000 0xa80000>;
  			};
+ 
+-			partition@c00000 {
++			nor_rootdisk: partition@c00000 {
+ 				label = "fit";
+ 				reg = <0xc00000 0x1400000>;
+ 				compatible = "denx,fit";
+@@ -60,3 +60,7 @@
  		};
  	};
-+
-+	fragment@1 {
-+		target-path = "/chosen";
-+		__overlay__ {
-+			rootdisk-nor = <&nor_rootdisk>;
-+		};
-+	};
  };
++
++&{/chosen} {
++	rootdisk-nor = <&nor_rootdisk>;
++};
 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
 +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
-@@ -17,6 +17,29 @@
- 			max-frequency = <52000000>;
- 			cap-sd-highspeed;
- 			status = "okay";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
+@@ -15,5 +15,24 @@
+ 	bus-width = <4>;
+ 	max-frequency = <52000000>;
+ 	cap-sd-highspeed;
++	#address-cells = <1>;
++	#size-cells = <0>;
+ 	status = "okay";
 +
-+			card@0 {
-+				compatible = "mmc-card";
-+				reg = <0>;
++	card@0 {
++		compatible = "mmc-card";
++		reg = <0>;
 +
-+				block {
-+					compatible = "block-device";
-+					partitions {
-+						sd_rootdisk: block-partition-production {
-+							partname = "production";
-+						};
-+					};
-+				};
++		partitions {
++			compatible = "gpt-partitions";
++
++			sd_rootdisk: block-partition-production {
++				partname = "production";
 +			};
 +		};
 +	};
++};
 +
-+	fragment@1 {
-+		target-path = "/chosen";
-+		__overlay__ {
-+			rootdisk-sd = <&sd_rootdisk>;
- 		};
- 	};
++&{/chosen} {
++	rootdisk-sd = <&sd_rootdisk>;
  };