ralink: add mt7620n dts files

Signed-off-by: John Crispin <[email protected]>

SVN-Revision: 38829

target/linux/ramips/dts/WMR300.dts

@@ -0,0 +1,96 @@
+/dts-v1/;
+
+/include/ "mt7620n.dtsi"
+
+/ {
+	compatible = "buffalo,wmr-300", "ralink,mt7620n-soc";
+	model = "Buffalo WMR-300";
+
+	palmbus@10000000 {
+		gpio2: gpio@660 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l6405d";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "en25q64";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x7b0000>;
+				};
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		ralink,port-map = "wllll";
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			default {
+				ralink,group = "i2c", "ephy";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		aoss1 {
+			label = "buffalo:red:aoss";
+			gpios = <&gpio2 1 1>;
+		};
+		aoss2 {
+			label = "buffalo:green:aoss";
+			gpios = <&gpio2 2 1>;
+		};
+		power {
+			label = "buffalo:green:status";
+			gpios = <&gpio2 4 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 1>;
+			linux,code = <0x198>;
+		};
+		aoss {
+			label = "aoss";
+			gpios = <&gpio0 2 1>;
+			linux,code = <0x211>;
+		};
+	};
+};

target/linux/ramips/dts/mt7620n.dtsi

@@ -0,0 +1,263 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ralink,mtk7620n-soc";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	cpuintc: cpuintc@0 {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	palmbus@10000000 {
+		compatible = "palmbus";
+		reg = <0x10000000 0x200000>;
+                ranges = <0x0 0x10000000 0x1FFFFF>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysc@0 {
+			compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
+			reg = <0x0 0x100>;
+		};
+
+		timer@100 {
+			compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
+			reg = <0x100 0x20>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <1>;
+		};
+
+		watchdog@120 {
+			compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
+			reg = <0x120 0x10>;
+
+			resets = <&rstctrl 8>;
+			reset-names = "wdt";
+
+			interrupt-parent = <&intc>;
+			interrupts = <1>;
+		};
+
+		intc: intc@200 {
+			compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
+			reg = <0x200 0x100>;
+
+			resets = <&rstctrl 19>;
+			reset-names = "intc";
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		memc@300 {
+			compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
+			reg = <0x300 0x100>;
+
+			resets = <&rstctrl 20>;
+			reset-names = "mc";
+
+			interrupt-parent = <&intc>;
+			interrupts = <3>;
+		};
+
+		gpio0: gpio@600 {
+			compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
+			reg = <0x600 0x34>;
+
+			resets = <&rstctrl 13>;
+			reset-names = "pio";
+
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ralink,gpio-base = <0>;
+			ralink,num-gpios = <24>;
+			ralink,register-map = [ 00 04 08 0c
+						20 24 28 2c
+						30 34 ];
+		};
+
+		gpio1: gpio@638 {
+			compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
+			reg = <0x638 0x24>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ralink,gpio-base = <24>;
+			ralink,num-gpios = <16>;
+			ralink,register-map = [ 00 04 08 0c
+						10 14 18 1c
+						20 24 ];
+
+			status = "disabled";
+		};
+
+		gpio2: gpio@660 {
+			compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
+			reg = <0x660 0x24>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ralink,gpio-base = <40>;
+			ralink,num-gpios = <32>;
+			ralink,register-map = [ 00 04 08 0c
+						10 14 18 1c
+						20 24 ];
+
+			status = "disabled";
+		};
+
+		spi@b00 {
+			compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
+			reg = <0xb00 0x100>;
+
+			resets = <&rstctrl 18>;
+			reset-names = "spi";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi_pins>;
+		};
+
+		uartlite@c00 {
+			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0xc00 0x100>;
+
+			resets = <&rstctrl 19>;
+			reset-names = "uartl";
+
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+
+			reg-shift = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uartlite_pins>;
+		};
+
+		systick@d00 {
+			compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
+			reg = <0xd00 0x10>;
+
+			resets = <&rstctrl 28>;
+			reset-names = "intc";
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <7>;
+		};
+	};
+
+	pinctrl {
+		compatible = "ralink,rt2880-pinmux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+		state_default: pinctrl0 {
+		};
+		spi_pins: spi {
+			spi {
+				ralink,group = "spi";
+				ralink,function = "spi";
+			};
+		};
+		uartlite_pins: uartlite {
+			uart {
+				ralink,group = "uartlite";
+				ralink,function = "uartlite";
+			};
+		};
+	};
+
+	rstctrl: rstctrl {
+		compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
+		#reset-cells = <1>;
+	};
+
+	ubsphy {
+		compatible = "ralink,mt7620a-usbphy";
+
+		resets = <&rstctrl 22 &rstctrl 25>;
+		reset-names = "host", "device";
+	};
+
+	ethernet@10100000 {
+		compatible = "ralink,mt7620a-eth";
+		reg = <0x10100000 10000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <5>;
+
+		resets = <&rstctrl 21 &rstctrl 23>;
+		reset-names = "fe", "esw";
+
+		mdio-bus {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+	};
+
+	gsw@10110000 {
+		compatible = "ralink,mt7620a-gsw";
+		reg = <0x10110000 8000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <17>;
+		ralink,port4 = "gmac";
+	};
+
+	ehci@101c0000 {
+		compatible = "ralink,rt3xxx-ehci";
+		reg = <0x101c0000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+
+		status = "disabled";
+	};
+
+	ohci@101c1000 {
+		compatible = "ralink,rt3xxx-ohci";
+		reg = <0x101c1000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+
+		status = "disabled";
+	};
+};