mediatek: backport more WED upstream fixes

Fixes hang if the WO firmware can't be loaded

Signed-off-by: Felix Fietkau <[email protected]>

target/linux/generic/backport-5.15/730-16-v6.3-net-ethernet-mtk_wed-fix-some-possible-NULL-pointer-.patch

@@ -0,0 +1,61 @@
+From: Lorenzo Bianconi <[email protected]>
+Date: Wed, 7 Dec 2022 15:04:54 +0100
+Subject: [PATCH] net: ethernet: mtk_wed: fix some possible NULL pointer
+ dereferences
+
+Fix possible NULL pointer dereference in mtk_wed_detach routine checking
+wo pointer is properly allocated before running mtk_wed_wo_reset() and
+mtk_wed_wo_deinit().
+Even if it is just a theoretical issue at the moment check wo pointer is
+not NULL in mtk_wed_mcu_msg_update.
+Moreover, honor mtk_wed_mcu_send_msg return value in mtk_wed_wo_reset()
+
+Fixes: 799684448e3e ("net: ethernet: mtk_wed: introduce wed wo support")
+Fixes: 4c5de09eb0d0 ("net: ethernet: mtk_wed: add configure wed wo support")
+Signed-off-by: Lorenzo Bianconi <[email protected]>
+Reviewed-by: Leon Romanovsky <[email protected]>
+Signed-off-by: Jakub Kicinski <[email protected]>
+---
+
+--- a/drivers/net/ethernet/mediatek/mtk_wed.c
++++ b/drivers/net/ethernet/mediatek/mtk_wed.c
+@@ -174,9 +174,10 @@ mtk_wed_wo_reset(struct mtk_wed_device *
+ 	mtk_wdma_tx_reset(dev);
+ 	mtk_wed_reset(dev, MTK_WED_RESET_WED);
+ 
+-	mtk_wed_mcu_send_msg(wo, MTK_WED_MODULE_ID_WO,
+-			     MTK_WED_WO_CMD_CHANGE_STATE, &state,
+-			     sizeof(state), false);
++	if (mtk_wed_mcu_send_msg(wo, MTK_WED_MODULE_ID_WO,
++				 MTK_WED_WO_CMD_CHANGE_STATE, &state,
++				 sizeof(state), false))
++		return;
+ 
+ 	if (readx_poll_timeout(mtk_wed_wo_read_status, dev, val,
+ 			       val == MTK_WED_WOIF_DISABLE_DONE,
+@@ -632,9 +633,11 @@ mtk_wed_detach(struct mtk_wed_device *de
+ 	mtk_wed_free_tx_rings(dev);
+ 
+ 	if (mtk_wed_get_rx_capa(dev)) {
+-		mtk_wed_wo_reset(dev);
++		if (hw->wed_wo)
++			mtk_wed_wo_reset(dev);
+ 		mtk_wed_free_rx_rings(dev);
+-		mtk_wed_wo_deinit(hw);
++		if (hw->wed_wo)
++			mtk_wed_wo_deinit(hw);
+ 	}
+ 
+ 	if (dev->wlan.bus_type == MTK_WED_BUS_PCIE) {
+--- a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
++++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
+@@ -207,6 +207,9 @@ int mtk_wed_mcu_msg_update(struct mtk_we
+ 	if (dev->hw->version == 1)
+ 		return 0;
+ 
++	if (WARN_ON(!wo))
++		return -ENODEV;
++
+ 	return mtk_wed_mcu_send_msg(wo, MTK_WED_MODULE_ID_WO, id, data, len,
+ 				    true);
+ }

target/linux/generic/backport-5.15/730-17-v6.3-net-ethernet-mtk_wed-fix-possible-deadlock-if-mtk_we.patch

@@ -0,0 +1,58 @@
+From: Lorenzo Bianconi <[email protected]>
+Date: Wed, 7 Dec 2022 15:04:55 +0100
+Subject: [PATCH] net: ethernet: mtk_wed: fix possible deadlock if
+ mtk_wed_wo_init fails
+
+Introduce __mtk_wed_detach() in order to avoid a deadlock in
+mtk_wed_attach routine if mtk_wed_wo_init fails since both
+mtk_wed_attach and mtk_wed_detach run holding hw_lock mutex.
+
+Fixes: 4c5de09eb0d0 ("net: ethernet: mtk_wed: add configure wed wo support")
+Signed-off-by: Lorenzo Bianconi <[email protected]>
+Reviewed-by: Leon Romanovsky <[email protected]>
+Signed-off-by: Jakub Kicinski <[email protected]>
+---
+
+--- a/drivers/net/ethernet/mediatek/mtk_wed.c
++++ b/drivers/net/ethernet/mediatek/mtk_wed.c
+@@ -619,12 +619,10 @@ mtk_wed_deinit(struct mtk_wed_device *de
+ }
+ 
+ static void
+-mtk_wed_detach(struct mtk_wed_device *dev)
++__mtk_wed_detach(struct mtk_wed_device *dev)
+ {
+ 	struct mtk_wed_hw *hw = dev->hw;
+ 
+-	mutex_lock(&hw_lock);
+-
+ 	mtk_wed_deinit(dev);
+ 
+ 	mtk_wdma_rx_reset(dev);
+@@ -657,6 +655,13 @@ mtk_wed_detach(struct mtk_wed_device *de
+ 	module_put(THIS_MODULE);
+ 
+ 	hw->wed_dev = NULL;
++}
++
++static void
++mtk_wed_detach(struct mtk_wed_device *dev)
++{
++	mutex_lock(&hw_lock);
++	__mtk_wed_detach(dev);
+ 	mutex_unlock(&hw_lock);
+ }
+ 
+@@ -1545,8 +1550,10 @@ mtk_wed_attach(struct mtk_wed_device *de
+ 		ret = mtk_wed_wo_init(hw);
+ 	}
+ out:
+-	if (ret)
+-		mtk_wed_detach(dev);
++	if (ret) {
++		dev_err(dev->hw->dev, "failed to attach wed device\n");
++		__mtk_wed_detach(dev);
++	}
+ unlock:
+ 	mutex_unlock(&hw_lock);
+