|
|
@@ -1,672 +1,100 @@
|
|
|
--- a/nl80211.h
|
|
|
+++ b/nl80211.h
|
|
|
-@@ -25,10 +25,30 @@
|
|
|
+@@ -1761,6 +1761,9 @@ enum nl80211_commands {
|
|
|
+ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
|
|
|
+ * is operating in an indoor environment.
|
|
|
*
|
|
|
- */
|
|
|
-
|
|
|
-+/*
|
|
|
-+ * This header file defines the userspace API to the wireless stack. Please
|
|
|
-+ * be careful not to break things - i.e. don't move anything around or so
|
|
|
-+ * unless you can demonstrate that it breaks neither API nor ABI.
|
|
|
-+ *
|
|
|
-+ * Additions to the API should be accompanied by actual implementations in
|
|
|
-+ * an upstream driver, so that example implementations exist in case there
|
|
|
-+ * are ever concerns about the precise semantics of the API or changes are
|
|
|
-+ * needed, and to ensure that code for dead (no longer implemented) API
|
|
|
-+ * can actually be identified and removed.
|
|
|
-+ * Nonetheless, semantics should also be documented carefully in this file.
|
|
|
-+ */
|
|
|
-+
|
|
|
- #include <linux/types.h>
|
|
|
-
|
|
|
- #define NL80211_GENL_NAME "nl80211"
|
|
|
-
|
|
|
-+#define NL80211_MULTICAST_GROUP_CONFIG "config"
|
|
|
-+#define NL80211_MULTICAST_GROUP_SCAN "scan"
|
|
|
-+#define NL80211_MULTICAST_GROUP_REG "regulatory"
|
|
|
-+#define NL80211_MULTICAST_GROUP_MLME "mlme"
|
|
|
-+#define NL80211_MULTICAST_GROUP_VENDOR "vendor"
|
|
|
-+#define NL80211_MULTICAST_GROUP_TESTMODE "testmode"
|
|
|
-+
|
|
|
- /**
|
|
|
- * DOC: Station handling
|
|
|
- *
|
|
|
-@@ -173,8 +193,8 @@
|
|
|
- * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
|
|
|
- *
|
|
|
- * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
|
|
|
-- * either a dump request on a %NL80211_ATTR_WIPHY or a specific get
|
|
|
-- * on an %NL80211_ATTR_IFINDEX is supported.
|
|
|
-+ * either a dump request for all interfaces or a specific get with a
|
|
|
-+ * single %NL80211_ATTR_IFINDEX is supported.
|
|
|
- * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
|
|
|
- * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
|
|
|
- * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
|
|
|
-@@ -227,7 +247,11 @@
|
|
|
- * the interface identified by %NL80211_ATTR_IFINDEX.
|
|
|
- * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
|
|
|
- * or, if no MAC address given, all stations, on the interface identified
|
|
|
-- * by %NL80211_ATTR_IFINDEX.
|
|
|
-+ * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and
|
|
|
-+ * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type
|
|
|
-+ * of disconnection indication should be sent to the station
|
|
|
-+ * (Deauthentication or Disassociation frame and reason code for that
|
|
|
-+ * frame).
|
|
|
- *
|
|
|
- * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
|
|
|
- * destination %NL80211_ATTR_MAC on the interface identified by
|
|
|
-@@ -248,7 +272,18 @@
|
|
|
- * %NL80211_ATTR_IFINDEX.
|
|
|
- *
|
|
|
- * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
|
|
|
-- * regulatory domain.
|
|
|
-+ * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device
|
|
|
-+ * has a private regulatory domain, it will be returned. Otherwise, the
|
|
|
-+ * global regdomain will be returned.
|
|
|
-+ * A device will have a private regulatory domain if it uses the
|
|
|
-+ * regulatory_hint() API. Even when a private regdomain is used the channel
|
|
|
-+ * information will still be mended according to further hints from
|
|
|
-+ * the regulatory core to help with compliance. A dump version of this API
|
|
|
-+ * is now available which will returns the global regdomain as well as
|
|
|
-+ * all private regdomains of present wiphys (for those that have it).
|
|
|
-+ * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then
|
|
|
-+ * its private regdomain is the only valid one for it. The regulatory
|
|
|
-+ * core is not used to help with compliance in this case.
|
|
|
- * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
|
|
|
- * after being queried by the kernel. CRDA replies by sending a regulatory
|
|
|
- * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
|
|
|
-@@ -302,7 +337,9 @@
|
|
|
- * if passed, define which channels should be scanned; if not
|
|
|
- * passed, all channels allowed for the current regulatory domain
|
|
|
- * are used. Extra IEs can also be passed from the userspace by
|
|
|
-- * using the %NL80211_ATTR_IE attribute.
|
|
|
-+ * using the %NL80211_ATTR_IE attribute. The first cycle of the
|
|
|
-+ * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
|
|
|
-+ * is supplied.
|
|
|
- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
|
|
|
- * scheduled scan is not running. The caller may assume that as soon
|
|
|
- * as the call returns, it is safe to start a new scheduled scan again.
|
|
|
-@@ -639,7 +676,18 @@
|
|
|
- * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
|
|
|
- * independently of the userspace SME, send this event indicating
|
|
|
- * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the
|
|
|
-- * attributes determining channel width.
|
|
|
-+ * attributes determining channel width. This indication may also be
|
|
|
-+ * sent when a remotely-initiated switch (e.g., when a STA receives a CSA
|
|
|
-+ * from the remote AP) is completed;
|
|
|
-+ *
|
|
|
-+ * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch
|
|
|
-+ * has been started on an interface, regardless of the initiator
|
|
|
-+ * (ie. whether it was requested from a remote device or
|
|
|
-+ * initiated on our own). It indicates that
|
|
|
-+ * %NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ
|
|
|
-+ * after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's. The userspace may
|
|
|
-+ * decide to react to this indication by requesting other
|
|
|
-+ * interfaces to change channel as well.
|
|
|
- *
|
|
|
- * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
|
|
|
- * its %NL80211_ATTR_WDEV identifier. It must have been created with
|
|
|
-@@ -738,6 +786,31 @@
|
|
|
- * before removing a station entry entirely, or before disassociating
|
|
|
- * or similar, cleanup will happen in the driver/device in this case.
|
|
|
- *
|
|
|
-+ * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to
|
|
|
-+ * destination %NL80211_ATTR_MAC on the interface identified by
|
|
|
-+ * %NL80211_ATTR_IFINDEX.
|
|
|
-+ *
|
|
|
-+ * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and
|
|
|
-+ * bandwidth of a channel must be given.
|
|
|
-+ * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the
|
|
|
-+ * network is determined by the network interface.
|
|
|
-+ *
|
|
|
-+ * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer,
|
|
|
-+ * identified by the %NL80211_ATTR_MAC parameter. A target channel is
|
|
|
-+ * provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining
|
|
|
-+ * channel width/type. The target operating class is given via
|
|
|
-+ * %NL80211_ATTR_OPER_CLASS.
|
|
|
-+ * The driver is responsible for continually initiating channel-switching
|
|
|
-+ * operations and returning to the base channel for communication with the
|
|
|
-+ * AP.
|
|
|
-+ * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS
|
|
|
-+ * peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel
|
|
|
-+ * when this command completes.
|
|
|
-+ *
|
|
|
-+ * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used
|
|
|
-+ * as an event to indicate changes for devices with wiphy-specific regdom
|
|
|
-+ * management.
|
|
|
-+ *
|
|
|
- * @NL80211_CMD_MAX: highest used command number
|
|
|
- * @__NL80211_CMD_AFTER_LAST: internal use
|
|
|
- */
|
|
|
-@@ -912,6 +985,18 @@ enum nl80211_commands {
|
|
|
- NL80211_CMD_ADD_TX_TS,
|
|
|
- NL80211_CMD_DEL_TX_TS,
|
|
|
-
|
|
|
-+ NL80211_CMD_GET_MPP,
|
|
|
-+
|
|
|
-+ NL80211_CMD_JOIN_OCB,
|
|
|
-+ NL80211_CMD_LEAVE_OCB,
|
|
|
-+
|
|
|
-+ NL80211_CMD_CH_SWITCH_STARTED_NOTIFY,
|
|
|
-+
|
|
|
-+ NL80211_CMD_TDLS_CHANNEL_SWITCH,
|
|
|
-+ NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
|
|
|
-+
|
|
|
-+ NL80211_CMD_WIPHY_REG_CHANGE,
|
|
|
-+
|
|
|
- /* add new commands above here */
|
|
|
-
|
|
|
- /* used to define NL80211_CMD_MAX below */
|
|
|
-@@ -1606,9 +1691,16 @@ enum nl80211_commands {
|
|
|
- * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
|
|
|
- * As specified in the &enum nl80211_tdls_peer_capability.
|
|
|
- *
|
|
|
-- * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface
|
|
|
-+ * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
|
|
|
- * creation then the new interface will be owned by the netlink socket
|
|
|
-- * that created it and will be destroyed when the socket is closed
|
|
|
-+ * that created it and will be destroyed when the socket is closed.
|
|
|
-+ * If set during scheduled scan start then the new scan req will be
|
|
|
-+ * owned by the netlink socket that created it and the scheduled scan will
|
|
|
-+ * be stopped when the socket is closed.
|
|
|
-+ * If set during configuration of regulatory indoor operation then the
|
|
|
-+ * regulatory indoor configuration would be owned by the netlink socket
|
|
|
-+ * that configured the indoor setting, and the indoor operation would be
|
|
|
-+ * cleared when the socket is closed.
|
|
|
- *
|
|
|
- * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
|
|
|
- * the TDLS link initiator.
|
|
|
-@@ -1638,6 +1730,40 @@ enum nl80211_commands {
|
|
|
- * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see
|
|
|
- * &enum nl80211_smps_mode.
|
|
|
- *
|
|
|
-+ * @NL80211_ATTR_OPER_CLASS: operating class
|
|
|
-+ *
|
|
|
-+ * @NL80211_ATTR_MAC_MASK: MAC address mask
|
|
|
-+ *
|
|
|
-+ * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
|
|
|
-+ * is self-managing its regulatory information and any regulatory domain
|
|
|
-+ * obtained from it is coming from the device's wiphy and not the global
|
|
|
-+ * cfg80211 regdomain.
|
|
|
-+ *
|
|
|
-+ * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte
|
|
|
-+ * array. The feature flags are identified by their bit index (see &enum
|
|
|
-+ * nl80211_ext_feature_index). The bit index is ordered starting at the
|
|
|
-+ * least-significant bit of the first byte in the array, ie. bit index 0
|
|
|
-+ * is located at bit 0 of byte 0. bit index 25 would be located at bit 1
|
|
|
-+ * of byte 3 (u8 array).
|
|
|
-+ *
|
|
|
-+ * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be
|
|
|
-+ * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY
|
|
|
-+ * may return a survey entry without a channel indicating global radio
|
|
|
-+ * statistics (only some values are valid and make sense.)
|
|
|
-+ * For devices that don't return such an entry even then, the information
|
|
|
-+ * should be contained in the result as the sum of the respective counters
|
|
|
-+ * over all channels.
|
|
|
-+ *
|
|
|
-+ * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a
|
|
|
-+ * WoWLAN net-detect scan) is started, u32 in seconds.
|
|
|
-+
|
|
|
-+ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
|
|
|
-+ * is operating in an indoor environment.
|
|
|
-+ *
|
|
|
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
|
|
|
+ * transmit power to stay within regulatory limits. u32, dBi.
|
|
|
+ *
|
|
|
-+ * @NUM_NL80211_ATTR: total number of nl80211_attrs available
|
|
|
+ * @NUM_NL80211_ATTR: total number of nl80211_attrs available
|
|
|
* @NL80211_ATTR_MAX: highest attribute number currently defined
|
|
|
* @__NL80211_ATTR_AFTER_LAST: internal use
|
|
|
- */
|
|
|
-@@ -1973,7 +2099,7 @@ enum nl80211_attrs {
|
|
|
-
|
|
|
- NL80211_ATTR_TDLS_PEER_CAPABILITY,
|
|
|
+@@ -2130,6 +2133,8 @@ enum nl80211_attrs {
|
|
|
|
|
|
-- NL80211_ATTR_IFACE_SOCKET_OWNER,
|
|
|
-+ NL80211_ATTR_SOCKET_OWNER,
|
|
|
+ NL80211_ATTR_REG_INDOOR,
|
|
|
|
|
|
- NL80211_ATTR_CSA_C_OFFSETS_TX,
|
|
|
- NL80211_ATTR_MAX_CSA_COUNTERS,
|
|
|
-@@ -1990,15 +2116,35 @@ enum nl80211_attrs {
|
|
|
-
|
|
|
- NL80211_ATTR_SMPS_MODE,
|
|
|
-
|
|
|
-+ NL80211_ATTR_OPER_CLASS,
|
|
|
-+
|
|
|
-+ NL80211_ATTR_MAC_MASK,
|
|
|
-+
|
|
|
-+ NL80211_ATTR_WIPHY_SELF_MANAGED_REG,
|
|
|
-+
|
|
|
-+ NL80211_ATTR_EXT_FEATURES,
|
|
|
-+
|
|
|
-+ NL80211_ATTR_SURVEY_RADIO_STATS,
|
|
|
-+
|
|
|
-+ NL80211_ATTR_NETNS_FD,
|
|
|
-+
|
|
|
-+ NL80211_ATTR_SCHED_SCAN_DELAY,
|
|
|
-+
|
|
|
-+ NL80211_ATTR_REG_INDOOR,
|
|
|
-+
|
|
|
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
|
|
|
+
|
|
|
/* add attributes here, update the policy in nl80211.c */
|
|
|
|
|
|
__NL80211_ATTR_AFTER_LAST,
|
|
|
-+ NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST,
|
|
|
- NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
|
|
|
- };
|
|
|
-
|
|
|
- /* source-level API compatibility */
|
|
|
- #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
|
|
|
- #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
|
|
|
-+#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
|
|
|
-
|
|
|
- /*
|
|
|
- * Allow user space programs to use #ifdef on new attributes by defining them
|
|
|
-@@ -2028,7 +2174,7 @@ enum nl80211_attrs {
|
|
|
-
|
|
|
- #define NL80211_MAX_SUPP_RATES 32
|
|
|
- #define NL80211_MAX_SUPP_HT_RATES 77
|
|
|
--#define NL80211_MAX_SUPP_REG_RULES 32
|
|
|
-+#define NL80211_MAX_SUPP_REG_RULES 64
|
|
|
- #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
|
|
|
- #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
|
|
|
- #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
|
|
|
-@@ -2064,6 +2210,8 @@ enum nl80211_attrs {
|
|
|
- * and therefore can't be created in the normal ways, use the
|
|
|
- * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
|
|
|
- * commands to create and destroy one
|
|
|
-+ * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
|
|
|
-+ * This mode corresponds to the MIB variable dot11OCBActivated=true
|
|
|
- * @NL80211_IFTYPE_MAX: highest interface type number currently defined
|
|
|
- * @NUM_NL80211_IFTYPES: number of defined interface types
|
|
|
- *
|
|
|
-@@ -2083,6 +2231,7 @@ enum nl80211_iftype {
|
|
|
- NL80211_IFTYPE_P2P_CLIENT,
|
|
|
- NL80211_IFTYPE_P2P_GO,
|
|
|
- NL80211_IFTYPE_P2P_DEVICE,
|
|
|
-+ NL80211_IFTYPE_OCB,
|
|
|
-
|
|
|
- /* keep last */
|
|
|
- NUM_NL80211_IFTYPES,
|
|
|
-@@ -2165,8 +2314,15 @@ struct nl80211_sta_flag_update {
|
|
|
- * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
|
|
|
- * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
|
|
|
- * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
|
|
|
-- * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate
|
|
|
-+ * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the
|
|
|
-+ * same as 160 for purposes of the bitrates
|
|
|
- * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
|
|
|
-+ * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is
|
|
|
-+ * a legacy rate and will be reported as the actual bitrate, i.e.
|
|
|
-+ * half the base (20 MHz) rate
|
|
|
-+ * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
|
|
|
-+ * a legacy rate and will be reported as the actual bitrate, i.e.
|
|
|
-+ * a quarter of the base (20 MHz) rate
|
|
|
- * @__NL80211_RATE_INFO_AFTER_LAST: internal use
|
|
|
- */
|
|
|
- enum nl80211_rate_info {
|
|
|
-@@ -2181,6 +2337,8 @@ enum nl80211_rate_info {
|
|
|
- NL80211_RATE_INFO_80_MHZ_WIDTH,
|
|
|
- NL80211_RATE_INFO_80P80_MHZ_WIDTH,
|
|
|
- NL80211_RATE_INFO_160_MHZ_WIDTH,
|
|
|
-+ NL80211_RATE_INFO_10_MHZ_WIDTH,
|
|
|
-+ NL80211_RATE_INFO_5_MHZ_WIDTH,
|
|
|
-
|
|
|
- /* keep last */
|
|
|
- __NL80211_RATE_INFO_AFTER_LAST,
|
|
|
-@@ -2225,18 +2383,24 @@ enum nl80211_sta_bss_param {
|
|
|
- *
|
|
|
- * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
|
|
|
- * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
|
|
|
-- * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
|
|
|
-- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
|
|
|
-- * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station)
|
|
|
-- * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station)
|
|
|
-+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length)
|
|
|
-+ * (u32, from this station)
|
|
|
-+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length)
|
|
|
-+ * (u32, to this station)
|
|
|
-+ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length)
|
|
|
-+ * (u64, from this station)
|
|
|
-+ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length)
|
|
|
-+ * (u64, to this station)
|
|
|
- * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
|
|
|
- * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
|
|
|
- * containing info as possible, see &enum nl80211_rate_info
|
|
|
-- * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
|
|
|
-- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
|
|
|
-- * station)
|
|
|
-- * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
|
|
|
-- * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
|
|
|
-+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
|
|
|
-+ * (u32, from this station)
|
|
|
-+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
|
|
|
-+ * (u32, to this station)
|
|
|
-+ * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station)
|
|
|
-+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs)
|
|
|
-+ * (u32, to this station)
|
|
|
- * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
|
|
|
- * @NL80211_STA_INFO_LLID: the station's mesh LLID
|
|
|
- * @NL80211_STA_INFO_PLID: the station's mesh PLID
|
|
|
-@@ -2260,6 +2424,16 @@ enum nl80211_sta_bss_param {
|
|
|
- * Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
|
|
|
- * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
|
|
|
- * 802.11 header (u32, kbps)
|
|
|
-+ * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
|
|
|
-+ * (u64)
|
|
|
-+ * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
|
|
|
-+ * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average
|
|
|
-+ * for beacons only (u8, dBm)
|
|
|
-+ * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats)
|
|
|
-+ * This is a nested attribute where each the inner attribute number is the
|
|
|
-+ * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
|
|
|
-+ * each one of those is again nested with &enum nl80211_tid_stats
|
|
|
-+ * attributes carrying the actual values.
|
|
|
- * @__NL80211_STA_INFO_AFTER_LAST: internal
|
|
|
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
|
|
|
+@@ -2620,16 +2625,17 @@ enum nl80211_band_attr {
|
|
|
+ * an indoor surroundings, i.e., it is connected to AC power (and not
|
|
|
+ * through portable DC inverters) or is under the control of a master
|
|
|
+ * that is acting as an AP and is connected to AC power.
|
|
|
+- * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this
|
|
|
++ * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this
|
|
|
+ * channel if it's connected concurrently to a BSS on the same channel on
|
|
|
+ * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
|
|
|
+- * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a
|
|
|
+- * channel that has the GO_CONCURRENT attribute set can be done when there
|
|
|
+- * is a clear assessment that the device is operating under the guidance of
|
|
|
+- * an authorized master, i.e., setting up a GO while the device is also
|
|
|
+- * connected to an AP with DFS and radar detection on the UNII band (it is
|
|
|
+- * up to user-space, i.e., wpa_supplicant to perform the required
|
|
|
+- * verifications)
|
|
|
++ * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS
|
|
|
++ * off-channel on a channel that has the IR_CONCURRENT attribute set can be
|
|
|
++ * done when there is a clear assessment that the device is operating under
|
|
|
++ * the guidance of an authorized master, i.e., setting up a GO or TDLS
|
|
|
++ * off-channel while the device is also connected to an AP with DFS and
|
|
|
++ * radar detection on the UNII band (it is up to user-space, i.e.,
|
|
|
++ * wpa_supplicant to perform the required verifications). Using this
|
|
|
++ * attribute for IR is disallowed for master interfaces (IBSS, AP).
|
|
|
+ * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
|
|
|
+ * on this channel in current regulatory domain.
|
|
|
+ * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
|
|
|
+@@ -2641,7 +2647,7 @@ enum nl80211_band_attr {
|
|
|
+ * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
|
|
|
+ * for more information on the FCC description of the relaxations allowed
|
|
|
+ * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
|
|
|
+- * NL80211_FREQUENCY_ATTR_GO_CONCURRENT.
|
|
|
++ * NL80211_FREQUENCY_ATTR_IR_CONCURRENT.
|
|
|
*/
|
|
|
-@@ -2292,6 +2466,10 @@ enum nl80211_sta_info {
|
|
|
- NL80211_STA_INFO_CHAIN_SIGNAL,
|
|
|
- NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
|
|
|
- NL80211_STA_INFO_EXPECTED_THROUGHPUT,
|
|
|
-+ NL80211_STA_INFO_RX_DROP_MISC,
|
|
|
-+ NL80211_STA_INFO_BEACON_RX,
|
|
|
-+ NL80211_STA_INFO_BEACON_SIGNAL_AVG,
|
|
|
-+ NL80211_STA_INFO_TID_STATS,
|
|
|
-
|
|
|
- /* keep last */
|
|
|
- __NL80211_STA_INFO_AFTER_LAST,
|
|
|
-@@ -2299,6 +2477,31 @@ enum nl80211_sta_info {
|
|
|
- };
|
|
|
+ enum nl80211_frequency_attr {
|
|
|
+ __NL80211_FREQUENCY_ATTR_INVALID,
|
|
|
+@@ -2659,7 +2665,7 @@ enum nl80211_frequency_attr {
|
|
|
+ NL80211_FREQUENCY_ATTR_NO_160MHZ,
|
|
|
+ NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
|
|
|
+ NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
|
|
|
+- NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
|
|
|
++ NL80211_FREQUENCY_ATTR_IR_CONCURRENT,
|
|
|
+ NL80211_FREQUENCY_ATTR_NO_20MHZ,
|
|
|
+ NL80211_FREQUENCY_ATTR_NO_10MHZ,
|
|
|
+
|
|
|
+@@ -2672,6 +2678,8 @@ enum nl80211_frequency_attr {
|
|
|
+ #define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR
|
|
|
+ #define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR
|
|
|
+ #define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR
|
|
|
++#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
|
|
|
++ NL80211_FREQUENCY_ATTR_IR_CONCURRENT
|
|
|
|
|
|
/**
|
|
|
-+ * enum nl80211_tid_stats - per TID statistics attributes
|
|
|
-+ * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
|
|
|
-+ * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64)
|
|
|
-+ * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or
|
|
|
-+ * attempted to transmit; u64)
|
|
|
-+ * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for
|
|
|
-+ * transmitted MSDUs (not counting the first attempt; u64)
|
|
|
-+ * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
|
|
|
-+ * MSDUs (u64)
|
|
|
-+ * @NUM_NL80211_TID_STATS: number of attributes here
|
|
|
-+ * @NL80211_TID_STATS_MAX: highest numbered attribute here
|
|
|
-+ */
|
|
|
-+enum nl80211_tid_stats {
|
|
|
-+ __NL80211_TID_STATS_INVALID,
|
|
|
-+ NL80211_TID_STATS_RX_MSDU,
|
|
|
-+ NL80211_TID_STATS_TX_MSDU,
|
|
|
-+ NL80211_TID_STATS_TX_MSDU_RETRIES,
|
|
|
-+ NL80211_TID_STATS_TX_MSDU_FAILED,
|
|
|
-+
|
|
|
-+ /* keep last */
|
|
|
-+ NUM_NL80211_TID_STATS,
|
|
|
-+ NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
|
|
|
-+};
|
|
|
-+
|
|
|
-+/**
|
|
|
- * enum nl80211_mpath_flags - nl80211 mesh path flags
|
|
|
- *
|
|
|
- * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
|
|
|
-@@ -2631,6 +2834,11 @@ enum nl80211_sched_scan_match_attr {
|
|
|
+ * enum nl80211_bitrate_attr - bitrate attributes
|
|
|
+@@ -2830,7 +2838,7 @@ enum nl80211_sched_scan_match_attr {
|
|
|
* @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
|
|
|
* base on contiguous rules and wider channels will be allowed to cross
|
|
|
* multiple contiguous/overlapping frequency ranges.
|
|
|
-+ * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT
|
|
|
-+ * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
|
|
|
-+ * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
|
|
|
-+ * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
|
|
|
-+ * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
|
|
|
- */
|
|
|
- enum nl80211_reg_rule_flags {
|
|
|
- NL80211_RRF_NO_OFDM = 1<<0,
|
|
|
-@@ -2643,11 +2851,18 @@ enum nl80211_reg_rule_flags {
|
|
|
+- * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT
|
|
|
++ * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT
|
|
|
+ * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
|
|
|
+ * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
|
|
|
+ * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
|
|
|
+@@ -2847,7 +2855,7 @@ enum nl80211_reg_rule_flags {
|
|
|
NL80211_RRF_NO_IR = 1<<7,
|
|
|
__NL80211_RRF_NO_IBSS = 1<<8,
|
|
|
NL80211_RRF_AUTO_BW = 1<<11,
|
|
|
-+ NL80211_RRF_GO_CONCURRENT = 1<<12,
|
|
|
-+ NL80211_RRF_NO_HT40MINUS = 1<<13,
|
|
|
-+ NL80211_RRF_NO_HT40PLUS = 1<<14,
|
|
|
-+ NL80211_RRF_NO_80MHZ = 1<<15,
|
|
|
-+ NL80211_RRF_NO_160MHZ = 1<<16,
|
|
|
- };
|
|
|
-
|
|
|
- #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
|
|
|
- #define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR
|
|
|
+- NL80211_RRF_GO_CONCURRENT = 1<<12,
|
|
|
++ NL80211_RRF_IR_CONCURRENT = 1<<12,
|
|
|
+ NL80211_RRF_NO_HT40MINUS = 1<<13,
|
|
|
+ NL80211_RRF_NO_HT40PLUS = 1<<14,
|
|
|
+ NL80211_RRF_NO_80MHZ = 1<<15,
|
|
|
+@@ -2859,6 +2867,7 @@ enum nl80211_reg_rule_flags {
|
|
|
#define NL80211_RRF_NO_IR NL80211_RRF_NO_IR
|
|
|
-+#define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\
|
|
|
-+ NL80211_RRF_NO_HT40PLUS)
|
|
|
+ #define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\
|
|
|
+ NL80211_RRF_NO_HT40PLUS)
|
|
|
++#define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT
|
|
|
|
|
|
/* For backport compatibility with older userspace */
|
|
|
#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
|
|
|
-@@ -2700,16 +2915,18 @@ enum nl80211_user_reg_hint_type {
|
|
|
- * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
|
|
|
- * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
|
|
|
- * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
|
|
|
-- * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
|
|
|
-- * spent on this channel
|
|
|
-- * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
|
|
|
-+ * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio
|
|
|
-+ * was turned on (on channel or globally)
|
|
|
-+ * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary
|
|
|
- * channel was sensed busy (either due to activity or energy detect)
|
|
|
-- * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
|
|
|
-+ * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension
|
|
|
- * channel was sensed busy
|
|
|
-- * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
|
|
|
-- * receiving data
|
|
|
-- * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
|
|
|
-- * transmitting data
|
|
|
-+ * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent
|
|
|
-+ * receiving data (on channel or globally)
|
|
|
-+ * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent
|
|
|
-+ * transmitting data (on channel or globally)
|
|
|
-+ * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
|
|
|
-+ * (on this channel or globally)
|
|
|
- * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
|
|
|
- * currently defined
|
|
|
- * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
|
|
|
-@@ -2719,17 +2936,25 @@ enum nl80211_survey_info {
|
|
|
- NL80211_SURVEY_INFO_FREQUENCY,
|
|
|
- NL80211_SURVEY_INFO_NOISE,
|
|
|
- NL80211_SURVEY_INFO_IN_USE,
|
|
|
-- NL80211_SURVEY_INFO_CHANNEL_TIME,
|
|
|
-- NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
|
|
|
-- NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
|
|
|
-- NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
|
|
|
-- NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
|
|
|
-+ NL80211_SURVEY_INFO_TIME,
|
|
|
-+ NL80211_SURVEY_INFO_TIME_BUSY,
|
|
|
-+ NL80211_SURVEY_INFO_TIME_EXT_BUSY,
|
|
|
-+ NL80211_SURVEY_INFO_TIME_RX,
|
|
|
-+ NL80211_SURVEY_INFO_TIME_TX,
|
|
|
-+ NL80211_SURVEY_INFO_TIME_SCAN,
|
|
|
-
|
|
|
- /* keep last */
|
|
|
- __NL80211_SURVEY_INFO_AFTER_LAST,
|
|
|
- NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
|
|
|
- };
|
|
|
-
|
|
|
-+/* keep old names for compatibility */
|
|
|
-+#define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME
|
|
|
-+#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY
|
|
|
-+#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY
|
|
|
-+#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX
|
|
|
-+#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX
|
|
|
-+
|
|
|
- /**
|
|
|
- * enum nl80211_mntr_flags - monitor configuration flags
|
|
|
- *
|
|
|
-@@ -2894,7 +3119,8 @@ enum nl80211_mesh_power_mode {
|
|
|
- *
|
|
|
- * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
|
|
|
- * established peering with for longer than this time (in seconds), then
|
|
|
-- * remove it from the STA's list of peers. Default is 30 minutes.
|
|
|
-+ * remove it from the STA's list of peers. You may set this to 0 to disable
|
|
|
-+ * the removal of the STA. Default is 30 minutes.
|
|
|
- *
|
|
|
- * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
|
|
|
- */
|
|
|
-@@ -3166,6 +3392,9 @@ enum nl80211_bss {
|
|
|
- /**
|
|
|
- * enum nl80211_bss_status - BSS "status"
|
|
|
- * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
|
|
|
-+ * Note that this is no longer used since cfg80211 no longer
|
|
|
-+ * keeps track of whether or not authentication was done with
|
|
|
-+ * a given BSS.
|
|
|
- * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
|
|
|
- * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
|
|
|
- *
|
|
|
-@@ -3379,6 +3608,8 @@ enum nl80211_ps_state {
|
|
|
- * interval in which %NL80211_ATTR_CQM_TXE_PKTS and
|
|
|
- * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an
|
|
|
- * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
|
|
|
-+ * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
|
|
|
-+ * loss event
|
|
|
- * @__NL80211_ATTR_CQM_AFTER_LAST: internal
|
|
|
- * @NL80211_ATTR_CQM_MAX: highest key attribute
|
|
|
- */
|
|
|
-@@ -3391,6 +3622,7 @@ enum nl80211_attr_cqm {
|
|
|
- NL80211_ATTR_CQM_TXE_RATE,
|
|
|
- NL80211_ATTR_CQM_TXE_PKTS,
|
|
|
- NL80211_ATTR_CQM_TXE_INTVL,
|
|
|
-+ NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
|
|
|
-
|
|
|
- /* keep last */
|
|
|
- __NL80211_ATTR_CQM_AFTER_LAST,
|
|
|
-@@ -3403,9 +3635,7 @@ enum nl80211_attr_cqm {
|
|
|
- * configured threshold
|
|
|
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
|
|
|
- * configured threshold
|
|
|
-- * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss.
|
|
|
-- * (Note that deauth/disassoc will still follow if the AP is not
|
|
|
-- * available. This event might get used as roaming event, etc.)
|
|
|
-+ * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent)
|
|
|
- */
|
|
|
- enum nl80211_cqm_rssi_threshold_event {
|
|
|
- NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
|
|
|
-@@ -3492,6 +3722,8 @@ struct nl80211_pattern_support {
|
|
|
- * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
|
|
|
- * the chip into a special state -- works best with chips that have
|
|
|
- * support for low-power operation already (flag)
|
|
|
-+ * Note that this mode is incompatible with all of the others, if
|
|
|
-+ * any others are even supported by the device.
|
|
|
- * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
|
|
|
- * is detected is implementation-specific (flag)
|
|
|
- * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
|
|
|
-@@ -3545,6 +3777,28 @@ struct nl80211_pattern_support {
|
|
|
- * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only,
|
|
|
- * the TCP connection ran out of tokens to use for data to send to the
|
|
|
- * service
|
|
|
-+ * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network
|
|
|
-+ * is detected. This is a nested attribute that contains the
|
|
|
-+ * same attributes used with @NL80211_CMD_START_SCHED_SCAN. It
|
|
|
-+ * specifies how the scan is performed (e.g. the interval, the
|
|
|
-+ * channels to scan and the initial delay) as well as the scan
|
|
|
-+ * results that will trigger a wake (i.e. the matchsets). This
|
|
|
-+ * attribute is also sent in a response to
|
|
|
-+ * @NL80211_CMD_GET_WIPHY, indicating the number of match sets
|
|
|
-+ * supported by the driver (u32).
|
|
|
-+ * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
|
|
|
-+ * containing an array with information about what triggered the
|
|
|
-+ * wake up. If no elements are present in the array, it means
|
|
|
-+ * that the information is not available. If more than one
|
|
|
-+ * element is present, it means that more than one match
|
|
|
-+ * occurred.
|
|
|
-+ * Each element in the array is a nested attribute that contains
|
|
|
-+ * one optional %NL80211_ATTR_SSID attribute and one optional
|
|
|
-+ * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of
|
|
|
-+ * these attributes must be present. If
|
|
|
-+ * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one
|
|
|
-+ * frequency, it means that the match occurred in more than one
|
|
|
-+ * channel.
|
|
|
- * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
|
|
|
- * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
|
|
|
- *
|
|
|
-@@ -3570,6 +3824,8 @@ enum nl80211_wowlan_triggers {
|
|
|
- NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH,
|
|
|
- NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST,
|
|
|
- NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
|
|
|
-+ NL80211_WOWLAN_TRIG_NET_DETECT,
|
|
|
-+ NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
|
|
|
-
|
|
|
- /* keep last */
|
|
|
- NUM_NL80211_WOWLAN_TRIG,
|
|
|
-@@ -4042,6 +4298,27 @@ enum nl80211_ap_sme_features {
|
|
|
- * multiplexing powersave, ie. can turn off all but one chain
|
|
|
- * and then wake the rest up as required after, for example,
|
|
|
- * rts/cts handshake.
|
|
|
-+ * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM
|
|
|
-+ * TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS
|
|
|
-+ * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it
|
|
|
-+ * needs to be able to handle Block-Ack agreements and other things.
|
|
|
-+ * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring
|
|
|
-+ * the vif's MAC address upon creation.
|
|
|
-+ * See 'macaddr' field in the vif_params (cfg80211.h).
|
|
|
-+ * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when
|
|
|
-+ * operating as a TDLS peer.
|
|
|
-+ * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a
|
|
|
-+ * random MAC address during scan (if the device is unassociated); the
|
|
|
-+ * %NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC
|
|
|
-+ * address mask/value will be used.
|
|
|
-+ * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports
|
|
|
-+ * using a random MAC address for every scan iteration during scheduled
|
|
|
-+ * scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may
|
|
|
-+ * be set for scheduled scan and the MAC address mask/value will be used.
|
|
|
-+ * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a
|
|
|
-+ * random MAC address for every scan iteration during "net detect", i.e.
|
|
|
-+ * scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may
|
|
|
-+ * be set for scheduled scan and the MAC address mask/value will be used.
|
|
|
- */
|
|
|
- enum nl80211_feature_flags {
|
|
|
- NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
|
|
|
-@@ -4070,6 +4347,27 @@ enum nl80211_feature_flags {
|
|
|
- NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23,
|
|
|
- NL80211_FEATURE_STATIC_SMPS = 1 << 24,
|
|
|
- NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25,
|
|
|
-+ NL80211_FEATURE_SUPPORTS_WMM_ADMISSION = 1 << 26,
|
|
|
-+ NL80211_FEATURE_MAC_ON_CREATE = 1 << 27,
|
|
|
-+ NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28,
|
|
|
-+ NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29,
|
|
|
-+ NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30,
|
|
|
-+ NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1 << 31,
|
|
|
-+};
|
|
|
-+
|
|
|
-+/**
|
|
|
-+ * enum nl80211_ext_feature_index - bit index of extended features.
|
|
|
-+ * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
|
|
|
-+ *
|
|
|
-+ * @NUM_NL80211_EXT_FEATURES: number of extended features.
|
|
|
-+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
|
|
|
-+ */
|
|
|
-+enum nl80211_ext_feature_index {
|
|
|
-+ NL80211_EXT_FEATURE_VHT_IBSS,
|
|
|
-+
|
|
|
-+ /* add new features before the definition below */
|
|
|
-+ NUM_NL80211_EXT_FEATURES,
|
|
|
-+ MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
|
|
|
- };
|
|
|
-
|
|
|
- /**
|
|
|
-@@ -4118,11 +4416,21 @@ enum nl80211_connect_failed_reason {
|
|
|
- * dangerous because will destroy stations performance as a lot of frames
|
|
|
- * will be lost while scanning off-channel, therefore it must be used only
|
|
|
- * when really needed
|
|
|
-+ * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or
|
|
|
-+ * for scheduled scan: a different one for every scan iteration). When the
|
|
|
-+ * flag is set, depending on device capabilities the @NL80211_ATTR_MAC and
|
|
|
-+ * @NL80211_ATTR_MAC_MASK attributes may also be given in which case only
|
|
|
-+ * the masked bits will be preserved from the MAC address and the remainder
|
|
|
-+ * randomised. If the attributes are not given full randomisation (46 bits,
|
|
|
-+ * locally administered 1, multicast 0) is assumed.
|
|
|
-+ * This flag must not be requested when the feature isn't supported, check
|
|
|
-+ * the nl80211 feature flags for the device.
|
|
|
- */
|
|
|
- enum nl80211_scan_flags {
|
|
|
- NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
|
|
|
- NL80211_SCAN_FLAG_FLUSH = 1<<1,
|
|
|
- NL80211_SCAN_FLAG_AP = 1<<2,
|
|
|
-+ NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3,
|
|
|
- };
|
|
|
-
|
|
|
- /**
|
Felix Fietkau