lantiq: Convert Zyxel P-2812HNU-FX and TP-Link TD-W8970 to support dwc2

Here the device tree entry for ifxhcd is listed as compatible with one
supported in dwc2 (after patching the dwc driver appropriately).

A second entry is added to support the second core of the hcd. This
entry is listed to be compatible with only dwc2. Done this way there
should be backwards support for both hcd drivers (ltq-hcd and dwc2)

Signed-off-by: Antti Seppälä <[email protected]>
Signed-off-by: Vincent Pelletier <[email protected]>

SVN-Revision: 44676

target/linux/lantiq/dts/P2812HNUFX.dtsi

@@ -205,6 +205,11 @@
 			lantiq,portmask = <0x3>;
 		};
 
+		ifxhcd@E106000 {
+			status = "okay";
+			gpios = <&gpio 33 0>;
+		};
+
 		pci@E105400 {
 			status = "okay";
 			#address-cells = <3>;

target/linux/lantiq/dts/TDW8970.dts

@@ -129,6 +129,11 @@
 			gpios = <&gpio 33 0>;
 			lantiq,portmask = <0x3>;
 		};
+
+		ifxhcd@E106000 {
+			status = "okay";
+			gpios = <&gpio 33 0>;
+		};
 	};
 
 	gphy-xrx200 {

target/linux/lantiq/dts/vr9.dtsi

@@ -138,13 +138,21 @@
 
 		ifxhcd@E101000 {
 			status = "disabled";
-			compatible = "lantiq,ifxhcd-xrx200";
+			compatible = "lantiq,ifxhcd-xrx200", "lantiq,ifxhcd-xrx200-dwc2";
 			reg = <0xE101000 0x1000
 				0xE120000 0x3f000>;
 			interrupt-parent = <&icu0>;
 			interrupts = <62 91>;
 		};
 
+		ifxhcd@E106000 {
+			status = "disabled";
+			compatible = "lantiq,ifxhcd-xrx200-dwc2";
+			reg = <0xE106000 0x1000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <91>;
+		};
+
 		mei@E116000 {
 			compatible = "lantiq,mei-xrx200";
 			interrupt-parent = <&icu0>;