Revert "bcm27xx: align and enable hwmon/thermal symbols"

This reverts commit f98f95359b60ba25f7f458190f1da4835410003d.

It seems that this commit is causing issues with the PWM fan on the RPi 5 as
reported here: https://github.com/openwrt/openwrt/issues/16191

So let's revert this for now.

Signed-off-by: Álvaro Fernández Rojas <[email protected]>

target/linux/bcm27xx/bcm2708/config-6.6

@@ -204,7 +204,6 @@ CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HWMON=y
 CONFIG_HW_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_BCM2835=y
@@ -367,7 +366,6 @@ CONFIG_THERMAL=y
 CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
 CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
 CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
 CONFIG_THERMAL_OF=y
 CONFIG_THREAD_INFO_IN_TASK=y
 CONFIG_TICK_CPU_ACCOUNTING=y

target/linux/bcm27xx/bcm2709/config-6.6

@@ -262,7 +262,6 @@ CONFIG_HIGHPTE=y
 CONFIG_HOTPLUG_CORE_SYNC=y
 CONFIG_HOTPLUG_CORE_SYNC_DEAD=y
 CONFIG_HOTPLUG_CPU=y
-CONFIG_HWMON=y
 CONFIG_HW_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_BCM2835=y
@@ -462,7 +461,6 @@ CONFIG_THERMAL=y
 CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
 CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
 CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
 CONFIG_THERMAL_OF=y
 CONFIG_THREAD_INFO_IN_TASK=y
 CONFIG_TICK_CPU_ACCOUNTING=y

target/linux/bcm27xx/bcm2710/config-6.6

@@ -268,7 +268,6 @@ CONFIG_HAS_IOPORT_MAP=y
 CONFIG_HOTPLUG_CORE_SYNC=y
 CONFIG_HOTPLUG_CORE_SYNC_DEAD=y
 CONFIG_HOTPLUG_CPU=y
-CONFIG_HWMON=y
 CONFIG_HW_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_BCM2835=y
@@ -460,7 +459,6 @@ CONFIG_THERMAL=y
 CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
 CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
 CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
 CONFIG_THERMAL_OF=y
 CONFIG_THERMAL_WRITABLE_TRIPS=y
 CONFIG_THREAD_INFO_IN_TASK=y

target/linux/bcm27xx/bcm2711/config-6.6

@@ -269,7 +269,6 @@ CONFIG_HAS_IOPORT_MAP=y
 CONFIG_HOTPLUG_CORE_SYNC=y
 CONFIG_HOTPLUG_CORE_SYNC_DEAD=y
 CONFIG_HOTPLUG_CPU=y
-CONFIG_HWMON=y
 CONFIG_HW_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_IPROC_RNG200=y
@@ -466,7 +465,6 @@ CONFIG_THERMAL=y
 CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
 CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
 CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
 CONFIG_THERMAL_OF=y
 CONFIG_THERMAL_WRITABLE_TRIPS=y
 CONFIG_THREAD_INFO_IN_TASK=y

target/linux/bcm27xx/bcm2712/config-6.6

@@ -583,7 +583,6 @@ CONFIG_THERMAL=y
 CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
 CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
 CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
 CONFIG_THERMAL_OF=y
 CONFIG_THERMAL_WRITABLE_TRIPS=y
 CONFIG_THREAD_INFO_IN_TASK=y

target/linux/bcm27xx/image/Makefile

@@ -201,7 +201,7 @@ define Device/rpi-5
 	cypress-firmware-43455-sdio \
 	brcmfmac-nvram-43455-sdio \
 	kmod-brcmfmac wpad-basic-mbedtls \
-	kmod-hwmon-pwmfan
+	kmod-hwmon-pwmfan kmod-thermal
   IMAGE/sysupgrade.img.gz := boot-common | sdcard-img | gzip | append-metadata
   IMAGE/factory.img.gz := boot-common | sdcard-img | gzip
 endef

target/linux/generic/config-6.6

@@ -5484,7 +5484,6 @@ CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_SENSORS_PWM_FAN is not set
 # CONFIG_SENSORS_PXE1610 is not set
 # CONFIG_SENSORS_Q54SJ108A2 is not set
-# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
 # CONFIG_SENSORS_RM3100_I2C is not set
 # CONFIG_SENSORS_RM3100_SPI is not set
 # CONFIG_SENSORS_SBRMI is not set