|
@@ -1,16 +1,16 @@
|
|
|
-From 6148931ae669f041a7036c9eb0ec1b225275c1dd Mon Sep 17 00:00:00 2001
|
|
|
+From 34e0545c33b0f444a5dd8c066cfe37420e95db33 Mon Sep 17 00:00:00 2001
|
|
|
From: Daniel Matuschek <[email protected]>
|
|
|
Date: Wed, 15 Jan 2014 21:41:23 +0100
|
|
|
-Subject: [PATCH 065/423] ASoC: wm8804: Implement MCLK configuration options,
|
|
|
- add 32bit support WM8804 can run with PLL frequencies of 256xfs and 128xfs
|
|
|
- for most sample rates. At 192kHz only 128xfs is supported. The existing
|
|
|
- driver selects 128xfs automatically for some lower samples rates. By using an
|
|
|
- additional mclk_div divider, it is now possible to control the behaviour.
|
|
|
- This allows using 256xfs PLL frequency on all sample rates up to 96kHz. It
|
|
|
- should allow lower jitter and better signal quality. The behavior has to be
|
|
|
- controlled by the sound card driver, because some sample frequency share the
|
|
|
- same setting. e.g. 192kHz and 96kHz use 24.576MHz master clock. The only
|
|
|
- difference is the MCLK divider.
|
|
|
+Subject: [PATCH] ASoC: wm8804: Implement MCLK configuration options, add 32bit
|
|
|
+ support WM8804 can run with PLL frequencies of 256xfs and 128xfs for most
|
|
|
+ sample rates. At 192kHz only 128xfs is supported. The existing driver selects
|
|
|
+ 128xfs automatically for some lower samples rates. By using an additional
|
|
|
+ mclk_div divider, it is now possible to control the behaviour. This allows
|
|
|
+ using 256xfs PLL frequency on all sample rates up to 96kHz. It should allow
|
|
|
+ lower jitter and better signal quality. The behavior has to be controlled by
|
|
|
+ the sound card driver, because some sample frequency share the same setting.
|
|
|
+ e.g. 192kHz and 96kHz use 24.576MHz master clock. The only difference is the
|
|
|
+ MCLK divider.
|
|
|
|
|
|
This also added support for 32bit data.
|
|
|
|