ramips: Add support for TEW-714TRU

Signed-off-by: Jimmy Zhong <[email protected]>

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -269,6 +269,10 @@ rt-n14u)
 	set_wifi_led "$board:blue:air"
 	set_usb_led "$board:blue:usb"
 	;;
+tew-714tru)
+	set_usb_led "$board:red:usb"
+	set_wifi_led "$board:green:wifi"
+	;;
 tiny-ac)
 	set_wifi_led "$board:orange:wifi"
 	set_usb_led "$board:green:usb"

target/linux/ramips/base-files/etc/board.d/02_network

@@ -212,6 +212,7 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
 		;;
+	tew-714tru|\
 	v11st-fe|\
 	wzr-agl300nh)
 		ucidef_add_switch "switch0" \

target/linux/ramips/base-files/lib/ramips.sh

@@ -403,6 +403,9 @@ ramips_board_detect() {
 	*"TEW-692GR")
 		name="tew-692gr"
 		;;
+	*"TEW-714TRU")
+		name="tew-714tru"
+		;;
 	*"UBNT-ERX")
 		name="ubnt-erx"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -118,6 +118,7 @@ platform_check_image() {
 	sl-r7205|\
 	tew-691gr|\
 	tew-692gr|\
+	tew-714tru|\
 	tiny-ac|\
 	ur-326n4g|\
 	ur-336un|\

target/linux/ramips/dts/TEW-714TRU.dts

@@ -0,0 +1,122 @@
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+/ {
+	compatible = "TEW-714TRU", "ralink,rt5350-soc";
+	model = "TRENDnet TEW714TRU";
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		usb {
+			label = "tew-714tru:red:usb";
+			gpios = <&gpio0 9 1>;
+		};
+
+		wifi {
+			label = "tew-714tru:green:wifi";
+			gpios = <&gpio0 13 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+                reset {
+                        label = "reset";
+                        gpios = <&gpio0 10 1>;
+                        linux,code = <0x198>;
+                };
+
+                wps {
+                        label = "wps";
+                        gpios = <&gpio0 0 1>;
+                        linux,code = <0x211>;
+                };
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		repeater {
+			gpio-export,name = "repeater_switch";
+			gpios = <&gpio0 7 0>;
+		};
+
+		wisp {
+			gpio-export,name = "wisp_switch";
+			gpios = <&gpio0 12 0>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		linux,modalias = "m25p80", "s25fl064k";
+		spi-max-frequency = <10000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x7b0000>;
+		};
+	};
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "jtag", "uartf";
+			ralink,function = "gpio";
+		};
+	};
+};
+
+&ethernet {
+	mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+	mediatek,portmap = <0x1>;
+	mediatek,portdisable = <0x3e>;
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};

target/linux/ramips/image/rt305x.mk

@@ -418,6 +418,12 @@ define Device/sl-r7205
 endef
 TARGET_DEVICES += sl-r7205
 
+define Device/tew-714tru
+  DTS := TEW-714TRU
+  IMAGE_SIZE := $(ralink_default_fw_size_8M)
+  DEVICE_TITLE := TRENDnet TEW-714TRU
+endef
+TARGET_DEVICES += tew-714tru
 
 define Device/v22rw-2x2
   DTS := V22RW-2X2