Geos -- new x86 subtarget definition This defines the Geos platform from Traverse Technologies in AUS.

This is a Geode LX800 with 512MB of DDR400 memory, 2 8139CP interfaces, 2 Solos ADSL2+ interfaces, USB, serial console, CF slot, and miniPCI slot.

I'll add support for the LEDs separately.

Signed-off-by: Philip A. Prindeville

SVN-Revision: 23390

target/linux/x86/Makefile

@@ -10,7 +10,7 @@ ARCH:=i386
 BOARD:=x86
 BOARDNAME:=x86
 FEATURES:=squashfs jffs2 ext2 vdi vmdk pcmcia targz
-SUBTARGETS=generic olpc xen_domu ep80579 net5501 kvm_guest
+SUBTARGETS=generic olpc xen_domu ep80579 net5501 kvm_guest geos
 
 LINUX_VERSION:=2.6.32.24
 

target/linux/x86/geos/config-default

@@ -0,0 +1,25 @@
+# CONFIG_ACPI is not set
+# CONFIG_DMI is not set
+CONFIG_CPU_SUP_AMD=y
+CONFIG_GEODE_MFGPT_TIMER=y
+# CONFIG_GEODE_WDT is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HWMON=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_ISA is not set
+# CONFIG_INPUT is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_M486 is not set
+CONFIG_MGEODE_LX=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_PROCESSOR_SELECT=y
+# CONFIG_SCx200 is not set
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_X86_DEBUGCTLMSR=y
+# CONFIG_X86_DS is not set
+CONFIG_X86_L1_CACHE_SHIFT=5
+CONFIG_X86_TSC=y
+CONFIG_X86_USE_3DNOW=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y

target/linux/x86/geos/target.mk

@@ -0,0 +1,25 @@
+BOARDNAME:=Traverse Geos
+FEATURES:=squashfs pci usb gpio
+DEFAULT_PACKAGES += kmod-ata-via-sata kmod-crypto-hw-geode \
+            kmod-gpio-cs5535 kmod-gpio-nsc \
+            kmod-wdt-geode kmod-hwmon-core kmod-hwmon-lm90 \
+            kmod-8139cp kmod-solos-pci \
+            kmod-i2c-core kmod-i2c-gpio \
+            kmod-i2c-algo-bit kmod-i2c-algo-pca kmod-i2c-algo-pcf \
+            kmod-usb-core kmod-usb2 kmod-usb-uhci \
+            kmod-cfg80211 kmod-mac80211 \
+            kmod-mppe kmod-pppoe kmod-pppoa kmod-pppol2tp \
+            kmod-ath kmod-ath5k kmod-ath9k
+
+CS5535_MASK:=0x0E000048
+
+CFLAGS += -Os -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps \
+      -fno-align-labels
+
+define Target/Description
+    Build firmware images for Traverse Geos board
+endef
+
+define KernelPackage/gpio-cs5535/install
+     sed -i -r -e 's/$$$$$$$$/ mask=$(CS5535_MASK)/' $(1)/etc/modules.d/??-gpio-cs5535
+endef

target/linux/x86/image/Config.in

@@ -8,7 +8,7 @@ config X86_GRUB_IMAGES
 config X86_GRUB_CONSOLE
 	bool "Use Console Terminal (in addition to Serial)"
 	depends X86_GRUB_IMAGES
-	default n if (TARGET_x86_generic_Soekris45xx || TARGET_x86_generic_Soekris48xx || TARGET_x86_net5501)
+	default n if (TARGET_x86_generic_Soekris45xx || TARGET_x86_generic_Soekris48xx || TARGET_x86_net5501 || TARGET_x86_geos)
 	default y
 
 config X86_GRUB_SERIAL
@@ -20,7 +20,7 @@ config X86_GRUB_SERIAL
 config X86_GRUB_BAUDRATE
 	int "Serial port baud rate"
 	depends X86_GRUB_IMAGES
-	default 19200 if TARGET_x86_generic_Soekris45xx || TARGET_x86_generic_Soekris48xx || TARGET_x86_net5501
+	default 19200 if TARGET_x86_generic_Soekris45xx || TARGET_x86_generic_Soekris48xx || TARGET_x86_net5501 || TARGET_x86_geos
 	default 38400
 
 config X86_GRUB_BOOTOPTS