bmips: inteno-xg6846: Add DSA LED definitions

This adds the LED definitons for the XG6846 DSA port LEDs.
These are standard properties compatible with the existing
Marvell 88e6xxx DT bindings and fully standardized so this
is fine to add. They will be used by the in-flight Marvell
88e6xxx LEDs support patch.

Signed-off-by: Linus Walleij <[email protected]>
[add empty lines between leds, remove default-state="off"]
Signed-off-by: Álvaro Fernández Rojas <[email protected]>

target/linux/bmips/dts/bcm6328-inteno-xg6846.dts

@@ -199,6 +199,24 @@
 				label = "lan1";
 
 				phy-handle = <&lan1phy>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+					};
+				};
 			};
 
 			port@1 {
@@ -206,6 +224,24 @@
 				label = "lan2";
 
 				phy-handle = <&lan2phy>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+					};
+				};
 			};
 
 			port@2 {
@@ -213,6 +249,24 @@
 				label = "lan3";
 
 				phy-handle = <&lan3phy>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+					};
+				};
 			};
 
 			port@3 {
@@ -220,6 +274,24 @@
 				label = "lan4";
 
 				phy-handle = <&lan4phy>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+					};
+				};
 			};
 
 			port@4 {
@@ -227,6 +299,24 @@
 				label = "ext1";
 
 				phy-handle = <&ext1phy>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_WAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_WAN;
+					};
+				};
 			};
 
 			port@5 {
@@ -240,6 +330,24 @@
 					speed = <1000>;
 					full-duplex;
 				};
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_WAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_WAN;
+					};
+				};
 			};
 
 			port@6 {