ipq806x: move arm-gic include into pcie patch

This include is necessary starting at the PCIe patch, which has a lower
number. So in order to keep the patches consistent, we'll move the
arm-gic include in the first patch who needs it.

Signed-off-by: Mathieu Olivari <[email protected]>

SVN-Revision: 45827

target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch

@@ -121,11 +121,12 @@ Signed-off-by: Mathieu Olivari <[email protected]>
  			#address-cells = <1>;
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -3,6 +3,7 @@
+@@ -3,6 +3,8 @@
  #include "skeleton.dtsi"
  #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
  #include <dt-bindings/soc/qcom,gsbi.h>
 +#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
++#include <dt-bindings/interrupt-controller/arm-gic.h>
  
  / {
  	model = "Qualcomm IPQ8064";

target/linux/ipq806x/patches-3.18/700-add-gmac-dts-suport.patch

@@ -119,14 +119,6 @@
  };
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -5,6 +5,7 @@
- #include <dt-bindings/mfd/qcom-rpm.h>
- #include <dt-bindings/soc/qcom,gsbi.h>
- #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
- 
- / {
- 	model = "Qualcomm IPQ8064";
 @@ -637,5 +638,42 @@
  				dr_mode = "host";
  			};

target/linux/ipq806x/patches-4.0/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch

@@ -121,11 +121,12 @@ Signed-off-by: Mathieu Olivari <[email protected]>
  			#address-cells = <1>;
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -3,6 +3,7 @@
+@@ -3,6 +3,8 @@
  #include "skeleton.dtsi"
  #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
  #include <dt-bindings/soc/qcom,gsbi.h>
 +#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
++#include <include/dt-bindings/interrupt-controller/arm-gic.h>
  
  / {
  	model = "Qualcomm IPQ8064";

target/linux/ipq806x/patches-4.0/700-add-gmac-dts-suport.patch

@@ -119,14 +119,6 @@
  };
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -5,6 +5,7 @@
- #include <dt-bindings/mfd/qcom-rpm.h>
- #include <dt-bindings/soc/qcom,gsbi.h>
- #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
- 
- / {
- 	model = "Qualcomm IPQ8064";
 @@ -539,5 +540,42 @@
  
  			status = "disabled";