ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines

Signed-off-by: Gabor Juhos <[email protected]>

SVN-Revision: 33818

target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c

@@ -175,27 +175,6 @@ static void __init om2p_lc_setup(void)
 
 MIPS_MACHINE(ATH79_MACH_OM2P_LC, "OM2P-LC", "OpenMesh OM2P LC", om2p_lc_setup);
 
-
-static void __init om2p_hs_gmac_setup(void)
-{
-	void __iomem *base;
-	u32 t;
-
-	base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
-
-	t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
-
-	t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
-	       AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE |
-	       AR934X_ETH_CFG_SW_PHY_SWAP);
-
-	t |= AR934X_ETH_CFG_SW_PHY_SWAP;
-	__raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
-	t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
-
-	iounmap(base);
-}
-
 static void __init om2p_hs_setup(void)
 {
 	u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
@@ -222,7 +201,7 @@ static void __init om2p_hs_setup(void)
 
 	ath79_register_wmac(art, NULL);
 
-	om2p_hs_gmac_setup();
+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
 	ath79_register_mdio(1, 0x0);
 
 	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);

target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c

@@ -123,23 +123,6 @@ static struct mdio_board_info rb2011_mdio0_info[] = {
 	},
 };
 
-static void __init rb2011_gmac_setup(void)
-{
-	void __iomem *base;
-	u32 t;
-
-	base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
-
-	t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
-	t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
-		AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
-	t |= AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE;
-
-	__raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
-
-	iounmap(base);
-}
-
 static void __init rb2011_wlan_init(void)
 {
 	u8 *hard_cfg = (u8 *) KSEG1ADDR(0x1f000000 + RB_HARD_CFG_OFFSET);
@@ -232,7 +215,8 @@ static void __init rb2011_setup(void)
 	ath79_register_m25p80(&rb2011_spi_flash_data);
 	rb2011_nand_init();
 
-	rb2011_gmac_setup();
+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+				   AR934X_ETH_CFG_SW_ONLY_MODE);
 
 	ath79_register_mdio(1, 0x0);
 	ath79_register_mdio(0, 0x0);

target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c

@@ -139,23 +139,6 @@ static struct mdio_board_info wdr4300_mdio0_info[] = {
 	},
 };
 
-static void __init wdr4300_gmac_setup(void)
-{
-	void __iomem *base;
-	u32 t;
-
-	base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
-
-	t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
-	t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
-	       AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
-	t |= AR934X_ETH_CFG_RGMII_GMAC0;
-
-	__raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
-
-	iounmap(base);
-}
-
 static void __init wdr4300_setup(void)
 {
 	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
@@ -176,7 +159,7 @@ static void __init wdr4300_setup(void)
 	ap9x_pci_setup_wmac_led_pin(0, 0);
 	ap91_pci_init(art + WDR4300_PCIE_CALDATA_OFFSET, tmpmac);
 
-	wdr4300_gmac_setup();
+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
 
 	mdiobus_register_board_info(wdr4300_mdio0_info,
 				    ARRAY_SIZE(wdr4300_mdio0_info));

target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c

@@ -101,23 +101,6 @@ static struct mdio_board_info db120_mdio0_info[] = {
 	},
 };
 
-static void __init db120_gmac_setup(void)
-{
-	void __iomem *base;
-	u32 t;
-
-	base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
-
-	t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
-	t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
-	       AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
-	t |= AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE;
-
-	__raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
-
-	iounmap(base);
-}
-
 static void __init tl_wr1041nv2_setup(void)
 {
 	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
@@ -132,7 +115,8 @@ static void __init tl_wr1041nv2_setup(void)
 					 tl_wr1041nv2_gpio_keys);
 	ath79_register_wmac(ee, mac);
 
-	db120_gmac_setup();
+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+				   AR934X_ETH_CFG_SW_ONLY_MODE);
 
 	ath79_register_mdio(1, 0x0);
 	ath79_register_mdio(0, 0x0);

target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c

@@ -99,26 +99,6 @@ static struct gpio_keys_button tl_wr841n_v8_gpio_keys[] __initdata = {
 	}
 };
 
-static void __init tl_wr841n_v8_gmac_setup(void)
-{
-	void __iomem *base;
-	u32 t;
-
-	base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
-
-	t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
-
-	t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
-	       AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE |
-	       AR934X_ETH_CFG_SW_PHY_SWAP);
-
-	t |= AR934X_ETH_CFG_SW_PHY_SWAP;
-	__raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
-	t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
-
-	iounmap(base);
-}
-
 static void __init tl_wr841n_v8_setup(void)
 {
 	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
@@ -133,7 +113,7 @@ static void __init tl_wr841n_v8_setup(void)
 
 	ath79_register_m25p80(&tl_wr841n_v8_flash_data);
 
-	tl_wr841n_v8_gmac_setup();
+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
 
 	ath79_register_mdio(1, 0x0);