ar71xx: add v4.14 support

adds v4.14 patches for testing but leaves v4.9 as default for now.

Signed-off-by: John Crispin <[email protected]>

target/linux/ar71xx/config-4.14

@@ -0,0 +1,485 @@
+CONFIG_AG71XX=y
+CONFIG_AG71XX_AR8216_SUPPORT=y
+# CONFIG_AG71XX_DEBUG is not set
+# CONFIG_AG71XX_DEBUG_FS is not set
+CONFIG_AR8216_PHY=y
+CONFIG_AR8216_PHY_LEDS=y
+CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+# CONFIG_ARCH_HAS_SG_CHAIN is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_AT803X_PHY=y
+CONFIG_ATH79=y
+# CONFIG_ATH79_DEV_AP9X_PCI is not set
+# CONFIG_ATH79_DEV_DSA is not set
+# CONFIG_ATH79_DEV_ETH is not set
+# CONFIG_ATH79_DEV_GPIO_BUTTONS is not set
+# CONFIG_ATH79_DEV_LEDS_GPIO is not set
+# CONFIG_ATH79_DEV_M25P80 is not set
+# CONFIG_ATH79_DEV_SPI is not set
+# CONFIG_ATH79_DEV_USB is not set
+# CONFIG_ATH79_MACH_A60 is not set
+# CONFIG_ATH79_MACH_ALFA_AP120C is not set
+# CONFIG_ATH79_MACH_ALFA_AP96 is not set
+# CONFIG_ATH79_MACH_ALFA_NX is not set
+# CONFIG_ATH79_MACH_ALL0258N is not set
+# CONFIG_ATH79_MACH_ALL0315N is not set
+# CONFIG_ATH79_MACH_ANTMINER_S1 is not set
+# CONFIG_ATH79_MACH_ANTMINER_S3 is not set
+# CONFIG_ATH79_MACH_ANTROUTER_R1 is not set
+# CONFIG_ATH79_MACH_AP121 is not set
+# CONFIG_ATH79_MACH_AP121F is not set
+# CONFIG_ATH79_MACH_AP132 is not set
+# CONFIG_ATH79_MACH_AP136 is not set
+# CONFIG_ATH79_MACH_AP143 is not set
+# CONFIG_ATH79_MACH_AP147 is not set
+# CONFIG_ATH79_MACH_AP152 is not set
+# CONFIG_ATH79_MACH_AP531B0 is not set
+# CONFIG_ATH79_MACH_AP81 is not set
+# CONFIG_ATH79_MACH_AP90Q is not set
+# CONFIG_ATH79_MACH_AP91_5G is not set
+# CONFIG_ATH79_MACH_AP96 is not set
+# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C59_V2 is not set
+# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C60_V2 is not set
+# CONFIG_ATH79_MACH_ARCHER_C7 is not set
+# CONFIG_ATH79_MACH_ARDUINO_YUN is not set
+# CONFIG_ATH79_MACH_AW_NR580 is not set
+# CONFIG_ATH79_MACH_BHR_4GRV2 is not set
+# CONFIG_ATH79_MACH_BHU_BXU2000N2_A is not set
+# CONFIG_ATH79_MACH_BSB is not set
+# CONFIG_ATH79_MACH_C55 is not set
+# CONFIG_ATH79_MACH_C60 is not set
+# CONFIG_ATH79_MACH_CAP324 is not set
+# CONFIG_ATH79_MACH_CAP4200AG is not set
+# CONFIG_ATH79_MACH_CARAMBOLA2 is not set
+# CONFIG_ATH79_MACH_CF_E316N_V2 is not set
+# CONFIG_ATH79_MACH_CF_E320N_V2 is not set
+# CONFIG_ATH79_MACH_CF_E355AC is not set
+# CONFIG_ATH79_MACH_CF_E375AC is not set
+# CONFIG_ATH79_MACH_CF_E380AC_V1 is not set
+# CONFIG_ATH79_MACH_CF_E380AC_V2 is not set
+# CONFIG_ATH79_MACH_CF_E520N is not set
+# CONFIG_ATH79_MACH_CF_E530N is not set
+# CONFIG_ATH79_MACH_CPE505N is not set
+# CONFIG_ATH79_MACH_CPE510 is not set
+# CONFIG_ATH79_MACH_CPE830 is not set
+# CONFIG_ATH79_MACH_CPE870 is not set
+# CONFIG_ATH79_MACH_CR3000 is not set
+# CONFIG_ATH79_MACH_CR5000 is not set
+# CONFIG_ATH79_MACH_DAP_1330_A1 is not set
+# CONFIG_ATH79_MACH_DAP_2695_A1 is not set
+# CONFIG_ATH79_MACH_DB120 is not set
+# CONFIG_ATH79_MACH_DGL_5500_A1 is not set
+# CONFIG_ATH79_MACH_DHP_1565_A1 is not set
+# CONFIG_ATH79_MACH_DIR_505_A1 is not set
+# CONFIG_ATH79_MACH_DIR_600_A1 is not set
+# CONFIG_ATH79_MACH_DIR_615_C1 is not set
+# CONFIG_ATH79_MACH_DIR_615_I1 is not set
+# CONFIG_ATH79_MACH_DIR_825_B1 is not set
+# CONFIG_ATH79_MACH_DIR_825_C1 is not set
+# CONFIG_ATH79_MACH_DIR_869_A1 is not set
+# CONFIG_ATH79_MACH_DLAN_HOTSPOT is not set
+# CONFIG_ATH79_MACH_DLAN_PRO_1200_AC is not set
+# CONFIG_ATH79_MACH_DLAN_PRO_500_WP is not set
+# CONFIG_ATH79_MACH_DOMYWIFI_DW33D is not set
+# CONFIG_ATH79_MACH_DR342 is not set
+# CONFIG_ATH79_MACH_DR344 is not set
+# CONFIG_ATH79_MACH_DR531 is not set
+# CONFIG_ATH79_MACH_DRAGINO2 is not set
+# CONFIG_ATH79_MACH_E1700AC_V2 is not set
+# CONFIG_ATH79_MACH_E2100L is not set
+# CONFIG_ATH79_MACH_E558_V2 is not set
+# CONFIG_ATH79_MACH_E600G_V2 is not set
+# CONFIG_ATH79_MACH_E750A_V4 is not set
+# CONFIG_ATH79_MACH_E750G_V8 is not set
+# CONFIG_ATH79_MACH_EAP120 is not set
+# CONFIG_ATH79_MACH_EAP300V2 is not set
+# CONFIG_ATH79_MACH_EAP7660D is not set
+# CONFIG_ATH79_MACH_EL_M150 is not set
+# CONFIG_ATH79_MACH_EL_MINI is not set
+# CONFIG_ATH79_MACH_ENS202EXT is not set
+# CONFIG_ATH79_MACH_EPG5000 is not set
+# CONFIG_ATH79_MACH_ESR1750 is not set
+# CONFIG_ATH79_MACH_ESR900 is not set
+# CONFIG_ATH79_MACH_EW_BALIN is not set
+# CONFIG_ATH79_MACH_EW_DORIN is not set
+# CONFIG_ATH79_MACH_F9K1115V2 is not set
+# CONFIG_ATH79_MACH_FRITZ300E is not set
+# CONFIG_ATH79_MACH_FRITZ4020 is not set
+# CONFIG_ATH79_MACH_FRITZ450E is not set
+# CONFIG_ATH79_MACH_GL_AR150 is not set
+# CONFIG_ATH79_MACH_GL_AR300 is not set
+# CONFIG_ATH79_MACH_GL_AR300M is not set
+# CONFIG_ATH79_MACH_GL_AR750 is not set
+# CONFIG_ATH79_MACH_GL_AR750S is not set
+# CONFIG_ATH79_MACH_GL_DOMINO is not set
+# CONFIG_ATH79_MACH_GL_INET is not set
+# CONFIG_ATH79_MACH_GL_MIFI is not set
+# CONFIG_ATH79_MACH_GL_USB150 is not set
+# CONFIG_ATH79_MACH_GS_OOLITE_V1 is not set
+# CONFIG_ATH79_MACH_GS_OOLITE_V5_2 is not set
+# CONFIG_ATH79_MACH_HIVEAP_121 is not set
+# CONFIG_ATH79_MACH_HIWIFI_HC6361 is not set
+# CONFIG_ATH79_MACH_HORNET_UB is not set
+# CONFIG_ATH79_MACH_JA76PF is not set
+# CONFIG_ATH79_MACH_JWAP003 is not set
+# CONFIG_ATH79_MACH_JWAP230 is not set
+# CONFIG_ATH79_MACH_KOALA is not set
+# CONFIG_ATH79_MACH_LAN_TURTLE is not set
+# CONFIG_ATH79_MACH_LIMA is not set
+# CONFIG_ATH79_MACH_MC_MAC1200R is not set
+# CONFIG_ATH79_MACH_MR12 is not set
+# CONFIG_ATH79_MACH_MR16 is not set
+# CONFIG_ATH79_MACH_MR1750 is not set
+# CONFIG_ATH79_MACH_MR18 is not set
+# CONFIG_ATH79_MACH_MR600 is not set
+# CONFIG_ATH79_MACH_MR900 is not set
+# CONFIG_ATH79_MACH_MYNET_N600 is not set
+# CONFIG_ATH79_MACH_MYNET_N750 is not set
+# CONFIG_ATH79_MACH_MYNET_REXT is not set
+# CONFIG_ATH79_MACH_MZK_W04NU is not set
+# CONFIG_ATH79_MACH_MZK_W300NH is not set
+# CONFIG_ATH79_MACH_N5Q is not set
+# CONFIG_ATH79_MACH_NBG460N is not set
+# CONFIG_ATH79_MACH_NBG6716 is not set
+# CONFIG_ATH79_MACH_OM2P is not set
+# CONFIG_ATH79_MACH_OM5P is not set
+# CONFIG_ATH79_MACH_OM5P_AC is not set
+# CONFIG_ATH79_MACH_OM5P_ACv2 is not set
+# CONFIG_ATH79_MACH_OMY_G1 is not set
+# CONFIG_ATH79_MACH_OMY_X1 is not set
+# CONFIG_ATH79_MACH_ONION_OMEGA is not set
+# CONFIG_ATH79_MACH_PB42 is not set
+# CONFIG_ATH79_MACH_PB44 is not set
+# CONFIG_ATH79_MACH_PQI_AIR_PEN is not set
+# CONFIG_ATH79_MACH_QIHOO_C301 is not set
+# CONFIG_ATH79_MACH_R36A is not set
+# CONFIG_ATH79_MACH_R602N is not set
+# CONFIG_ATH79_MACH_R6100 is not set
+# CONFIG_ATH79_MACH_RAMBUTAN is not set
+# CONFIG_ATH79_MACH_RB2011 is not set
+# CONFIG_ATH79_MACH_RB4XX is not set
+# CONFIG_ATH79_MACH_RB750 is not set
+# CONFIG_ATH79_MACH_RB91X is not set
+# CONFIG_ATH79_MACH_RB922 is not set
+# CONFIG_ATH79_MACH_RB95X is not set
+# CONFIG_ATH79_MACH_RBSPI is not set
+# CONFIG_ATH79_MACH_RBSXTLITE is not set
+# CONFIG_ATH79_MACH_RE355 is not set
+# CONFIG_ATH79_MACH_RE450 is not set
+# CONFIG_ATH79_MACH_RME_EG200 is not set
+# CONFIG_ATH79_MACH_RUT9XX is not set
+# CONFIG_ATH79_MACH_RW2458N is not set
+# CONFIG_ATH79_MACH_SC1750 is not set
+# CONFIG_ATH79_MACH_SC300M is not set
+# CONFIG_ATH79_MACH_SC450 is not set
+# CONFIG_ATH79_MACH_SMART_300 is not set
+# CONFIG_ATH79_MACH_SOM9331 is not set
+# CONFIG_ATH79_MACH_SR3200 is not set
+# CONFIG_ATH79_MACH_T830 is not set
+# CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE is not set
+# CONFIG_ATH79_MACH_TEW_632BRP is not set
+# CONFIG_ATH79_MACH_TEW_673GRU is not set
+# CONFIG_ATH79_MACH_TEW_712BR is not set
+# CONFIG_ATH79_MACH_TEW_732BR is not set
+# CONFIG_ATH79_MACH_TEW_823DRU is not set
+# CONFIG_ATH79_MACH_TL_MR11U is not set
+# CONFIG_ATH79_MACH_TL_MR13U is not set
+# CONFIG_ATH79_MACH_TL_MR3020 is not set
+# CONFIG_ATH79_MACH_TL_MR3X20 is not set
+# CONFIG_ATH79_MACH_TL_MR6400 is not set
+# CONFIG_ATH79_MACH_TL_WA701ND_V2 is not set
+# CONFIG_ATH79_MACH_TL_WA7210N_V2 is not set
+# CONFIG_ATH79_MACH_TL_WA801ND_V3 is not set
+# CONFIG_ATH79_MACH_TL_WA830RE_V2 is not set
+# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set
+# CONFIG_ATH79_MACH_TL_WA855RE_V1 is not set
+# CONFIG_ATH79_MACH_TL_WA901ND is not set
+# CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set
+# CONFIG_ATH79_MACH_TL_WA901ND_V4 is not set
+# CONFIG_ATH79_MACH_TL_WAX50RE is not set
+# CONFIG_ATH79_MACH_TL_WDR3320_V2 is not set
+# CONFIG_ATH79_MACH_TL_WDR3500 is not set
+# CONFIG_ATH79_MACH_TL_WDR4300 is not set
+# CONFIG_ATH79_MACH_TL_WDR6500_V2 is not set
+# CONFIG_ATH79_MACH_TL_WPA8630 is not set
+# CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set
+# CONFIG_ATH79_MACH_TL_WR1043ND is not set
+# CONFIG_ATH79_MACH_TL_WR1043ND_V2 is not set
+# CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set
+# CONFIG_ATH79_MACH_TL_WR1043N_V5 is not set
+# CONFIG_ATH79_MACH_TL_WR2543N is not set
+# CONFIG_ATH79_MACH_TL_WR703N is not set
+# CONFIG_ATH79_MACH_TL_WR720N_V3 is not set
+# CONFIG_ATH79_MACH_TL_WR741ND is not set
+# CONFIG_ATH79_MACH_TL_WR741ND_V4 is not set
+# CONFIG_ATH79_MACH_TL_WR802N_V1 is not set
+# CONFIG_ATH79_MACH_TL_WR802N_V2 is not set
+# CONFIG_ATH79_MACH_TL_WR810N is not set
+# CONFIG_ATH79_MACH_TL_WR810N_V2 is not set
+# CONFIG_ATH79_MACH_TL_WR840N_V2 is not set
+# CONFIG_ATH79_MACH_TL_WR841N_V1 is not set
+# CONFIG_ATH79_MACH_TL_WR841N_V8 is not set
+# CONFIG_ATH79_MACH_TL_WR841N_V9 is not set
+# CONFIG_ATH79_MACH_TL_WR902AC_V1 is not set
+# CONFIG_ATH79_MACH_TL_WR940N_V4 is not set
+# CONFIG_ATH79_MACH_TL_WR941ND is not set
+# CONFIG_ATH79_MACH_TL_WR941ND_V6 is not set
+# CONFIG_ATH79_MACH_TL_WR942N_V1 is not set
+# CONFIG_ATH79_MACH_TS_D084 is not set
+# CONFIG_ATH79_MACH_TUBE2H is not set
+# CONFIG_ATH79_MACH_UBNT is not set
+# CONFIG_ATH79_MACH_UBNT_UNIFIAC is not set
+# CONFIG_ATH79_MACH_UBNT_XM is not set
+# CONFIG_ATH79_MACH_WAM250 is not set
+# CONFIG_ATH79_MACH_WEIO is not set
+# CONFIG_ATH79_MACH_WHR_HP_G300N is not set
+# CONFIG_ATH79_MACH_WI2A_AC200I is not set
+# CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO is not set
+# CONFIG_ATH79_MACH_WLAE_AG300N is not set
+# CONFIG_ATH79_MACH_WLR8100 is not set
+# CONFIG_ATH79_MACH_WNDAP360 is not set
+# CONFIG_ATH79_MACH_WNDR3700 is not set
+# CONFIG_ATH79_MACH_WNDR4300 is not set
+# CONFIG_ATH79_MACH_WNR2000 is not set
+# CONFIG_ATH79_MACH_WNR2000_V3 is not set
+# CONFIG_ATH79_MACH_WNR2000_V4 is not set
+# CONFIG_ATH79_MACH_WNR2200 is not set
+# CONFIG_ATH79_MACH_WP543 is not set
+# CONFIG_ATH79_MACH_WPE72 is not set
+# CONFIG_ATH79_MACH_WPJ342 is not set
+# CONFIG_ATH79_MACH_WPJ344 is not set
+# CONFIG_ATH79_MACH_WPJ531 is not set
+# CONFIG_ATH79_MACH_WPJ558 is not set
+# CONFIG_ATH79_MACH_WPJ563 is not set
+# CONFIG_ATH79_MACH_WRT160NL is not set
+# CONFIG_ATH79_MACH_WRT400N is not set
+# CONFIG_ATH79_MACH_WRTNODE2Q is not set
+# CONFIG_ATH79_MACH_WZR_450HP2 is not set
+# CONFIG_ATH79_MACH_WZR_HP_AG300H is not set
+# CONFIG_ATH79_MACH_WZR_HP_G300NH is not set
+# CONFIG_ATH79_MACH_WZR_HP_G300NH2 is not set
+# CONFIG_ATH79_MACH_WZR_HP_G450H is not set
+# CONFIG_ATH79_MACH_XD3200 is not set
+# CONFIG_ATH79_MACH_Z1 is not set
+# CONFIG_ATH79_MACH_ZBT_WE1526 is not set
+# CONFIG_ATH79_MACH_ZCN_1523H is not set
+# CONFIG_ATH79_NVRAM is not set
+# CONFIG_ATH79_PCI_ATH9K_FIXUP is not set
+# CONFIG_ATH79_ROUTERBOOT is not set
+CONFIG_ATH79_WDT=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_COMMON_CLK_BOSTON is not set
+CONFIG_COMMON_CLK=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_FIXED_PHY=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_74X164=y
+CONFIG_GPIO_ATH79=y
+CONFIG_GPIO_GENERIC=y
+# CONFIG_GPIO_LATCH is not set
+CONFIG_GPIO_NXP_74HC153=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CBPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_GPIO=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_SOURCE="../../root"
+CONFIG_INTEL_XWAY_PHY=y
+CONFIG_IP17XX_PHY=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+CONFIG_LEDS_GPIO=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MDIO_GPIO=y
+CONFIG_MICREL_PHY=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
+CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_SPRAM=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CYBERTAN_PARTS=y
+CONFIG_MTD_M25P80=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_MYLOADER_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_EVA_FW=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_LZMA_FW=y
+CONFIG_MTD_SPLIT_MINOR_FW=y
+CONFIG_MTD_SPLIT_SEAMA_FW=y
+CONFIG_MTD_SPLIT_TPLINK_FW=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_MTD_SPLIT_WRGG_FW=y
+CONFIG_MTD_TPLINK_PARTS=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_MV88E6063=y
+CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+# CONFIG_NO_IOPORT_MAP is not set
+# CONFIG_OF is not set
+# CONFIG_PCI_AR724X is not set
+CONFIG_PCI_DRIVERS_LEGACY=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_RATIONAL=y
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366RB_PHY=y
+CONFIG_RTL8366S_PHY=y
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367_PHY=y
+# CONFIG_SCHED_INFO is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250_FSL is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SOC_AR71XX is not set
+# CONFIG_SOC_AR724X is not set
+# CONFIG_SOC_AR913X is not set
+# CONFIG_SOC_AR933X is not set
+# CONFIG_SOC_AR934X is not set
+# CONFIG_SOC_QCA953X is not set
+# CONFIG_SOC_QCA955X is not set
+# CONFIG_SOC_QCA956X is not set
+CONFIG_SPI=y
+CONFIG_SPI_ATH79=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+# CONFIG_SPI_RB4XX is not set
+# CONFIG_SPI_VSC7385 is not set
+CONFIG_SRCU=y
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_LEDS=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_USB_SUPPORT=y

target/linux/ar71xx/files/arch/mips/ath79/mach-a60.c

@@ -86,12 +86,12 @@ static struct at803x_platform_data a60_at803x_data = {
 static struct mdio_board_info a60_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 1,
+		.mdio_addr = 1,
 		.platform_data = &a60_at803x_data,
 	},
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 2,
+		.mdio_addr = 2,
 		.platform_data = &a60_at803x_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap120c.c

@@ -83,7 +83,7 @@ static struct ar8327_platform_data ap120c_ar8327_data = {
 static struct mdio_board_info ap120c_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &ap120c_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-ap132.c

@@ -98,7 +98,7 @@ static struct ar8327_platform_data ap132_ar8327_data = {
 static struct mdio_board_info ap132_mdio1_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.1",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &ap132_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c

@@ -97,7 +97,7 @@ static struct ar8327_platform_data ap152_ar8337_data = {
 static struct mdio_board_info ap152_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &ap152_ar8337_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v4.c

@@ -200,7 +200,7 @@ static struct ar8327_platform_data archer_c7_v4_ar8337_data = {
 static struct mdio_board_info archer_c7_v4_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &archer_c7_v4_ar8337_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c

@@ -155,7 +155,7 @@ static struct ar8327_platform_data archer_c7_v5_ar8337_data = {
 static struct mdio_board_info archer_c7_v5_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &archer_c7_v5_ar8337_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c

@@ -197,7 +197,7 @@ static struct ar8327_platform_data archer_c7_ar8327_data = {
 static struct mdio_board_info archer_c7_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &archer_c7_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c

@@ -125,7 +125,7 @@ static struct ar8327_platform_data bhr_4grv2_ar8327_data = {
 static struct mdio_board_info bhr_4grv2_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &bhr_4grv2_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c

@@ -15,7 +15,11 @@
 #include <linux/pci.h>
 #include <linux/phy.h>
 #include <linux/mtd/mtd.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
 #include <linux/mtd/nand.h>
+#else
+#include <linux/mtd/rawnand.h>
+#endif
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
@@ -115,7 +119,7 @@ static struct ar8327_platform_data c60_ar8327_data = {
 static struct mdio_board_info c60_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &c60_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c

@@ -243,7 +243,7 @@ static struct ar8327_platform_data cf_e375ac_ar8337_data = {
 static struct mdio_board_info cf_e375ac_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &cf_e375ac_ar8337_data,
 	},
 };
@@ -323,7 +323,7 @@ static struct at803x_platform_data cf_e380ac_v1v2_at803x_data = {
 static struct mdio_board_info cf_e380ac_v1v2_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &cf_e380ac_v1v2_at803x_data,
 	},
 };
@@ -681,7 +681,7 @@ static struct ar8327_platform_data cf_e385ac_qca8337_data = {
 static struct mdio_board_info cf_e385ac_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &cf_e385ac_qca8337_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c

@@ -128,7 +128,7 @@ static struct ar8327_platform_data cr5000_ar8327_data = {
 static struct mdio_board_info cr5000_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &cr5000_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c

@@ -119,7 +119,7 @@ static struct ar8327_platform_data dap2695_ar8327_data = {
 static struct mdio_board_info dap2695_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &dap2695_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-dgl-5500-a1.c

@@ -104,7 +104,7 @@ static struct ar8327_platform_data dgl_5500_a1_ar8327_data = {
 static struct mdio_board_info dgl_5500_a1_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &dgl_5500_a1_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c

@@ -114,7 +114,7 @@ static struct ar8327_platform_data dhp1565a1_ar8327_data = {
 static struct mdio_board_info dhp1565a1_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &dhp1565a1_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c

@@ -160,7 +160,7 @@ static struct ar8327_platform_data dir825c1_ar8327_data = {
 static struct mdio_board_info dir825c1_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &dir825c1_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-dir-869-a1.c

@@ -118,7 +118,7 @@ static struct ar8327_platform_data dir869a1_ar8327_data = {
 static struct mdio_board_info dir869a1_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &dir869a1_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-1200-ac.c

@@ -135,7 +135,7 @@ static struct ar8327_platform_data dlan_pro_1200_ac_ar8327_data = {
 static struct mdio_board_info dlan_pro_1200_ac_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &dlan_pro_1200_ac_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c

@@ -146,7 +146,7 @@ static struct ar8327_platform_data dlan_pro_500_wp_ar8327_data = {
 static struct mdio_board_info dlan_pro_500_wp_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &dlan_pro_500_wp_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-domywifi-dw33d.c

@@ -21,7 +21,11 @@
 #include <linux/platform_device.h>
 #include <linux/ar8216_platform.h>
 #include <linux/mtd/mtd.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
 #include <linux/mtd/nand.h>
+#else
+#include <linux/mtd/rawnand.h>
+#endif
 #include <linux/platform/ar934x_nfc.h>
 
 #include <asm/mach-ath79/ar71xx_regs.h>
@@ -131,7 +135,7 @@ static struct ar8327_platform_data dw33d_qca8337_data = {
 static struct mdio_board_info dw33d_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &dw33d_qca8337_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c

@@ -139,7 +139,7 @@ static struct at803x_platform_data dr34x_at803x_data = {
 static struct mdio_board_info dr34x_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &dr34x_at803x_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-e1700ac-v2.c

@@ -103,7 +103,7 @@ static struct ar8327_platform_data e1700ac_v2_qca8334_data = {
 static struct mdio_board_info e1700ac_v2_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &e1700ac_v2_qca8334_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-e558-v2.c

@@ -120,7 +120,7 @@ static struct ar8327_platform_data e558_v2_ar8327_data = {
 static struct mdio_board_info e558_v2_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &e558_v2_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-e750g-v8.c

@@ -110,7 +110,7 @@ static struct ar8327_platform_data e750g_v8_ar8327_data = {
 static struct mdio_board_info e750g_v8_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &e750g_v8_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c

@@ -114,7 +114,7 @@ static struct ar8327_platform_data epg5000_ar8327_data = {
 static struct mdio_board_info epg5000_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &epg5000_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-esr1750.c

@@ -113,7 +113,7 @@ static struct ar8327_platform_data esr1750_ar8327_data = {
 static struct mdio_board_info esr1750_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &esr1750_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c

@@ -136,7 +136,7 @@ static struct ar8327_platform_data esr900_ar8327_data = {
 static struct mdio_board_info esr900_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &esr900_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c

@@ -129,7 +129,7 @@ static struct ar8327_platform_data f9k1115v2_ar8327_data = {
 static struct mdio_board_info f9k1115v2_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &f9k1115v2_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c

@@ -129,7 +129,7 @@ static struct at803x_platform_data fritz450E_at803x_data = {
 static struct mdio_board_info fritz450E_mdio_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.1",
-		.phy_addr = FRITZ450E_PHY_ADDRESS,
+		.mdio_addr = FRITZ450E_PHY_ADDRESS,
 		.platform_data = &fritz450E_at803x_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750s.c

@@ -145,7 +145,7 @@ static struct ar8327_platform_data gl_ar750s_ar8327_data = {
 static struct mdio_board_info gl_ar750s_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &gl_ar750s_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c

@@ -111,7 +111,7 @@ static struct ar8327_platform_data jwap230_qca8337_data = {
 static struct mdio_board_info jwap230_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &jwap230_qca8337_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c

@@ -94,7 +94,7 @@ static struct at803x_platform_data koala_at803x_data = {
 static struct mdio_board_info koala_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 5,
+		.mdio_addr = 5,
 		.platform_data = &koala_at803x_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c

@@ -103,7 +103,7 @@ static struct at803x_platform_data mr1750_at803x_data = {
 static struct mdio_board_info mr1750_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 5,
+		.mdio_addr = 5,
 		.platform_data = &mr1750_at803x_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-mr900.c

@@ -105,7 +105,7 @@ static struct at803x_platform_data mr900_at803x_data = {
 static struct mdio_board_info mr900_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 5,
+		.mdio_addr = 5,
 		.platform_data = &mr900_at803x_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c

@@ -144,7 +144,7 @@ static struct ar8327_platform_data mynet_n750_ar8327_data = {
 static struct mdio_board_info mynet_n750_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &mynet_n750_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c

@@ -135,7 +135,7 @@ static struct at803x_platform_data mynet_rext_at803x_data = {
 static struct mdio_board_info mynet_rext_mdio0_info[] = {
         {
                 .bus_id = "ag71xx-mdio.0",
-                .phy_addr = 4,
+                .mdio_addr = 4,
                 .platform_data = &mynet_rext_at803x_data,
         },
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c

@@ -24,7 +24,11 @@
 #include <linux/ar8216_platform.h>
 #include <linux/gpio.h>
 #include <linux/mtd/mtd.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
 #include <linux/mtd/nand.h>
+#else
+#include <linux/mtd/rawnand.h>
+#endif
 #include <linux/platform/ar934x_nfc.h>
 
 #include <asm/mach-ath79/ar71xx_regs.h>
@@ -242,7 +246,7 @@ static struct ar8327_platform_data nbg6716_ar8327_data = {
 static struct mdio_board_info nbg6716_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &nbg6716_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c

@@ -160,7 +160,7 @@ static struct at803x_platform_data om5p_an_at803x_data = {
 static struct mdio_board_info om5p_an_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 7,
+		.mdio_addr = 7,
 		.platform_data = &om5p_an_at803x_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-om5pac.c

@@ -107,12 +107,12 @@ static struct at803x_platform_data om5pac_at803x_data = {
 static struct mdio_board_info om5pac_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 1,
+		.mdio_addr = 1,
 		.platform_data = &om5pac_at803x_data,
 	},
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 2,
+		.mdio_addr = 2,
 		.platform_data = &om5pac_at803x_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-om5pacv2.c

@@ -119,12 +119,12 @@ static struct at803x_platform_data om5pacv2_an_at8031_data = {
 static struct mdio_board_info om5pacv2_an_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 4,
+		.mdio_addr = 4,
 		.platform_data = &om5pacv2_an_at803x_data,
 	},
 	{
 		.bus_id = "ag71xx-mdio.1",
-		.phy_addr = 1,
+		.mdio_addr = 1,
 		.platform_data = &om5pacv2_an_at8031_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c

@@ -39,7 +39,7 @@ static struct at803x_platform_data rambutan_ar8032_data = {
 static struct mdio_board_info rambutan_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &rambutan_ar8032_data,
 	},
 };
@@ -52,7 +52,7 @@ static struct at803x_platform_data rambutan_ar8033_data = {
 static struct mdio_board_info rambutan_mdio1_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.1",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &rambutan_ar8033_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c

@@ -17,7 +17,11 @@
 #include <linux/ath9k_platform.h>
 #include <linux/ar8216_platform.h>
 #include <linux/mtd/mtd.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
 #include <linux/mtd/nand.h>
+#else
+#include <linux/mtd/rawnand.h>
+#endif
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -156,7 +160,7 @@ static struct ar8327_platform_data rb2011_ar8327_data = {
 static struct mdio_board_info rb2011_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &rb2011_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c

@@ -199,7 +199,7 @@ static struct ar8327_platform_data rb750gr3_ar8327_data = {
 static struct mdio_board_info rb750g3_mdio_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &rb750gr3_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c

@@ -15,7 +15,11 @@
 #include <linux/platform_device.h>
 #include <linux/ath9k_platform.h>
 #include <linux/mtd/mtd.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
 #include <linux/mtd/nand.h>
+#else
+#include <linux/mtd/rawnand.h>
+#endif
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/74x164.h>
@@ -227,7 +231,7 @@ static struct at803x_platform_data rb91x_at803x_data = {
 static struct mdio_board_info rb91x_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &rb91x_at803x_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c

@@ -13,7 +13,11 @@
 #include <linux/platform_device.h>
 #include <linux/ath9k_platform.h>
 #include <linux/mtd/mtd.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
 #include <linux/mtd/nand.h>
+#else
+#include <linux/mtd/rawnand.h>
+#endif
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -108,7 +112,7 @@ static struct at803x_platform_data rb922gs_at803x_data = {
 static struct mdio_board_info rb922gs_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = RB922_PHY_ADDR,
+		.mdio_addr = RB922_PHY_ADDR,
 		.platform_data = &rb922gs_at803x_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c

@@ -18,7 +18,11 @@
 #include <linux/ath9k_platform.h>
 #include <linux/ar8216_platform.h>
 #include <linux/mtd/mtd.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
 #include <linux/mtd/nand.h>
+#else
+#include <linux/mtd/rawnand.h>
+#endif
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -114,7 +118,7 @@ static struct ar8327_platform_data rb95x_ar8327_data = {
 static struct mdio_board_info rb95x_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &rb95x_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c

@@ -328,7 +328,7 @@ static struct ar8327_platform_data rb962_ar8327_data = {
 static struct mdio_board_info rb962_mdio0_info[] = {
 		{
 				.bus_id = "ag71xx-mdio.0",
-				.phy_addr = 0,
+				.mdio_addr = 0,
 				.platform_data = &rb962_ar8327_data,
 		},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-rbsxtlite.c

@@ -17,7 +17,11 @@
 #include <linux/platform_device.h>
 #include <linux/ath9k_platform.h>
 #include <linux/mtd/mtd.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
 #include <linux/mtd/nand.h>
+#else
+#include <linux/mtd/rawnand.h>
+#endif
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>

target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c

@@ -95,7 +95,7 @@ static struct at803x_platform_data at803x_data = {
 static struct mdio_board_info sc1750_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 1,
+		.mdio_addr = 1,
 		.platform_data = &at803x_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c

@@ -82,7 +82,7 @@ static struct at803x_platform_data at803x_data = {
 static struct mdio_board_info sc300m_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 1,
+		.mdio_addr = 1,
 		.platform_data = &at803x_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-sc450.c

@@ -99,7 +99,7 @@ static struct at803x_platform_data at803x_data = {
 static struct mdio_board_info sc450_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 1,
+		.mdio_addr = 1,
 		.platform_data = &at803x_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-sr3200.c

@@ -114,7 +114,7 @@ static struct ar8327_platform_data sr3200_xd3200_qca833x_data = {
 static struct mdio_board_info sr3200_xd3200_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &sr3200_xd3200_qca833x_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-tew-823dru.c

@@ -122,7 +122,7 @@ static struct ar8327_platform_data tew_823dru_ar8327_data = {
 static struct mdio_board_info tew_823dru_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &tew_823dru_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c

@@ -148,7 +148,7 @@ static struct ar8327_platform_data wdr4300_ar8327_data = {
 static struct mdio_board_info wdr4300_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &wdr4300_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wpa8630.c

@@ -128,7 +128,7 @@ static struct ar8327_platform_data tl_wpa8630_qca8337_data = {
 static struct mdio_board_info tl_wpa8630_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &tl_wpa8630_qca8337_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c

@@ -115,7 +115,7 @@ static struct ar8327_platform_data db120_ar8327_data = {
 static struct mdio_board_info db120_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &db120_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c

@@ -159,7 +159,7 @@ static struct ar8327_platform_data wr1043nd_v2_ar8327_data = {
 static struct mdio_board_info wr1043nd_v2_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &wr1043nd_v2_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c

@@ -157,7 +157,7 @@ static struct ar8327_platform_data tl_wr1043nd_v4_ar8327_data = {
 static struct mdio_board_info tl_wr1043nd_v4_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &tl_wr1043nd_v4_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c

@@ -131,7 +131,7 @@ static struct ar8327_platform_data ubnt_unifiac_pro_ar8327_data = {
 static struct mdio_board_info ubnt_unifiac_pro_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &ubnt_unifiac_pro_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-xm.c

@@ -342,7 +342,7 @@ static struct ar8327_platform_data uap_pro_ar8327_data = {
 static struct mdio_board_info uap_pro_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &uap_pro_ar8327_data,
 	},
 };
@@ -489,7 +489,7 @@ static struct at803x_platform_data ubnt_loco_m_xw_at803x_data = {
 static struct mdio_board_info ubnt_loco_m_xw_mdio_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 1,
+		.mdio_addr = 1,
 		.platform_data = &ubnt_loco_m_xw_at803x_data,
 	},
 };
@@ -596,7 +596,7 @@ static struct at803x_platform_data ubnt_rocket_m_ti_at803_data = {
 static struct mdio_board_info ubnt_rocket_m_ti_mdio_info[] = {
         {
                 .bus_id = "ag71xx-mdio.0",
-                .phy_addr = 4,
+                .mdio_addr = 4,
                 .platform_data = &ubnt_rocket_m_ti_at803_data,
         },
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c

@@ -126,7 +126,7 @@ static struct ar8327_platform_data wlr8100_ar8327_data = {
 static struct mdio_board_info wlr8100_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &wlr8100_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-wndr4300.c

@@ -16,7 +16,11 @@
 #include <linux/ath9k_platform.h>
 #include <linux/ar8216_platform.h>
 #include <linux/mtd/mtd.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
 #include <linux/mtd/nand.h>
+#else
+#include <linux/mtd/rawnand.h>
+#endif
 #include <linux/platform/ar934x_nfc.h>
 
 #include <asm/mach-ath79/ar71xx_regs.h>
@@ -158,7 +162,7 @@ static struct ar8327_platform_data wndr4300_ar8327_data = {
 static struct mdio_board_info wndr4300_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &wndr4300_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-wpj342.c

@@ -130,7 +130,7 @@ static struct ar8327_platform_data wpj342_ar8327_data = {
 static struct mdio_board_info wpj342_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &wpj342_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-wpj344.c

@@ -124,7 +124,7 @@ static struct ar8327_platform_data wpj344_ar8327_data = {
 static struct mdio_board_info wpj344_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &wpj344_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-wpj558.c

@@ -127,7 +127,7 @@ static struct ar8327_platform_data wpj558_ar8327_data = {
 static struct mdio_board_info wpj558_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &wpj558_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-wpj563.c

@@ -106,7 +106,7 @@ static struct ar8327_platform_data WPJ563_ar8337_data = {
 static struct mdio_board_info WPJ563_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &WPJ563_ar8337_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-450hp2.c

@@ -168,7 +168,7 @@ static struct ar8327_platform_data wzr_450hp2_ar8327_data = {
 static struct mdio_board_info wzr_450hp2_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = 0,
+		.mdio_addr = 0,
 		.platform_data = &wzr_450hp2_ar8327_data,
 	},
 };

target/linux/ar71xx/files/arch/mips/ath79/mach-z1.c

@@ -114,7 +114,7 @@ static struct ar8327_platform_data z1_ar8327_data = {
 static struct mdio_board_info z1_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
-		.phy_addr = Z1_ETH_SWITCH_PHY,
+		.mdio_addr = Z1_ETH_SWITCH_PHY,
 		.platform_data = &z1_ar8327_data,
 	},
 };

target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c

@@ -13,7 +13,7 @@
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>

target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c

@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>

target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c

@@ -10,7 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>

target/linux/ar71xx/files/drivers/mtd/nand/rb91x_nand.c

@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/module.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>

target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c

@@ -182,7 +182,11 @@ static int mv88e6063_setup_port(struct dsa_switch *ds, int p)
 #else
 				ds->enabled_port_mask :
 #endif
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
 				(1 << ds->dst->cpu_port)));
+#else
+				(1 << ds->dst->cpu_dp->index)));
+#endif
 
 	/*
 	 * Port Association Vector: when learning source addresses
@@ -275,15 +279,29 @@ static struct dsa_switch_ops mv88e6063_switch_ops = {
 	.phy_write	= mv88e6063_phy_write,
 };
 
+#if LINUX_VERSION_CODE > KERNEL_VERSION(4,13,0)
+static struct dsa_switch_driver mv88e6063_switch_drv = {
+	.ops = &mv88e6063_switch_ops,
+};
+#endif
+
 static int __init mv88e6063_init(void)
 {
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
 	register_switch_driver(&mv88e6063_switch_ops);
+#else
+	register_switch_driver(&mv88e6063_switch_drv);
+#endif
 	return 0;
 }
 module_init(mv88e6063_init);
 
 static void __exit mv88e6063_cleanup(void)
 {
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
 	unregister_switch_driver(&mv88e6063_switch_ops);
+#else
+	unregister_switch_driver(&mv88e6063_switch_drv);
+#endif
 }
 module_exit(mv88e6063_cleanup);

target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c

@@ -22,7 +22,11 @@ static int ag71xx_ethtool_get_settings(struct net_device *dev,
 	if (!phydev)
 		return -ENODEV;
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
 	return phy_ethtool_gset(phydev, cmd);
+#else
+	return phy_ethtool_ioctl(phydev, cmd);
+#endif
 }
 
 static int ag71xx_ethtool_set_settings(struct net_device *dev,
@@ -34,7 +38,11 @@ static int ag71xx_ethtool_set_settings(struct net_device *dev,
 	if (!phydev)
 		return -ENODEV;
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
 	return phy_ethtool_sset(phydev, cmd);
+#else
+	return phy_ethtool_ioctl(phydev, cmd);
+#endif
 }
 
 static void ag71xx_ethtool_get_drvinfo(struct net_device *dev,

target/linux/ar71xx/patches-4.14/001-spi-cs-gpio.patch

@@ -0,0 +1,20 @@
+--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
++++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+@@ -14,6 +14,7 @@
+ struct ath79_spi_platform_data {
+ 	unsigned	bus_num;
+ 	unsigned	num_chipselect;
++	int *cs_gpios;
+ };
+ 
+ #endif /* _ATH79_SPI_PLATFORM_H */
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -231,6 +231,7 @@ static int ath79_spi_probe(struct platfo
+ 	if (pdata) {
+ 		master->bus_num = pdata->bus_num;
+ 		master->num_chipselect = pdata->num_chipselect;
++		master->cs_gpios = pdata->cs_gpios;
+ 	}
+ 
+ 	sp->bitbang.master = master;

target/linux/ar71xx/patches-4.14/002-add_back_gpio_function_select.patch

@@ -0,0 +1,92 @@
+--- /dev/null
++++ b/arch/mips/ath79/gpio.c
+@@ -0,0 +1,59 @@
++/*
++ *  Atheros AR71XX/AR724X/AR913X GPIO API support
++ *
++ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <[email protected]>
++ *  Copyright (C) 2008-2011 Gabor Juhos <[email protected]>
++ *  Copyright (C) 2008 Imre Kaloz <[email protected]>
++ *
++ *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++#include "common.h"
++
++void __iomem *ath79_gpio_base;
++EXPORT_SYMBOL_GPL(ath79_gpio_base);
++
++static void __iomem *ath79_gpio_get_function_reg(void)
++{
++	u32 reg = 0;
++
++	if (soc_is_ar71xx() ||
++	    soc_is_ar724x() ||
++	    soc_is_ar913x() ||
++	    soc_is_ar933x())
++		reg = AR71XX_GPIO_REG_FUNC;
++	else if (soc_is_ar934x())
++		reg = AR934X_GPIO_REG_FUNC;
++	else
++		BUG();
++
++	return ath79_gpio_base + reg;
++}
++
++void ath79_gpio_function_setup(u32 set, u32 clear)
++{
++	void __iomem *reg = ath79_gpio_get_function_reg();
++
++	__raw_writel((__raw_readl(reg) & ~clear) | set, reg);
++	/* flush write */
++	__raw_readl(reg);
++}
++
++void ath79_gpio_function_enable(u32 mask)
++{
++	ath79_gpio_function_setup(mask, 0);
++}
++
++void ath79_gpio_function_disable(u32 mask)
++{
++	ath79_gpio_function_setup(0, mask);
++}
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -118,6 +118,7 @@ static inline int soc_is_qca955x(void)
+ void ath79_ddr_wb_flush(unsigned int reg);
+ void ath79_ddr_set_pci_windows(void);
+ 
++extern void __iomem *ath79_gpio_base;
+ extern void __iomem *ath79_pll_base;
+ extern void __iomem *ath79_reset_base;
+ 
+--- a/arch/mips/ath79/dev-common.c
++++ b/arch/mips/ath79/dev-common.c
+@@ -156,4 +156,5 @@ void __init ath79_gpio_init(void)
+ 	}
+ 
+ 	platform_device_register(&ath79_gpio_device);
++	ath79_gpio_base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+ }
+--- a/arch/mips/ath79/common.h
++++ b/arch/mips/ath79/common.h
+@@ -24,6 +24,9 @@ unsigned long ath79_get_sys_clk_rate(con
+ 
+ void ath79_ddr_ctrl_init(void);
+ 
++void ath79_gpio_function_enable(u32 mask);
++void ath79_gpio_function_disable(u32 mask);
++void ath79_gpio_function_setup(u32 set, u32 clear);
+ void ath79_gpio_init(void);
+ 
+ #endif /* __ATH79_COMMON_H */

target/linux/ar71xx/patches-4.14/004-register_gpio_driver_earlier.patch

@@ -0,0 +1,18 @@
+HACK: register the GPIO driver earlier to ensure that gpio_request calls
+from mach files succeed.
+
+--- a/drivers/gpio/gpio-ath79.c
++++ b/drivers/gpio/gpio-ath79.c
+@@ -322,7 +322,11 @@ static struct platform_driver ath79_gpio
+ 	.remove = ath79_gpio_remove,
+ };
+ 
+-module_platform_driver(ath79_gpio_driver);
++static int __init ath79_gpio_init(void)
++{
++	return platform_driver_register(&ath79_gpio_driver);
++}
++postcore_initcall(ath79_gpio_init);
+ 
+ MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support");
+ MODULE_LICENSE("GPL v2");

target/linux/ar71xx/patches-4.14/100-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch

@@ -0,0 +1,42 @@
+From 8b7a76e72fc819753878cd5684e243f33f847c79 Mon Sep 17 00:00:00 2001
+From: Markos Chandras <[email protected]>
+Date: Wed, 21 Aug 2013 11:47:22 +0100
+Subject: [PATCH] MIPS: ath79: Avoid using unitialized 'reg' variable
+
+Fixes the following build error:
+arch/mips/include/asm/mach-ath79/ath79.h:139:20: error: 'reg' may be used
+uninitialized in this function [-Werror=maybe-uninitialized]
+arch/mips/ath79/common.c:62:6: note: 'reg' was declared here
+In file included from arch/mips/ath79/common.c:20:0:
+arch/mips/ath79/common.c: In function 'ath79_device_reset_clear':
+arch/mips/include/asm/mach-ath79/ath79.h:139:20:
+error: 'reg' may be used uninitialized in this function
+[-Werror=maybe-uninitialized]
+arch/mips/ath79/common.c:90:6: note: 'reg' was declared here
+
+Signed-off-by: Markos Chandras <[email protected]>
+Acked-by: Gabor Juhos <[email protected]>
+---
+ arch/mips/ath79/common.c |    4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -106,7 +106,7 @@ void ath79_device_reset_set(u32 mask)
+ 	else if (soc_is_qca955x())
+ 		reg = QCA955X_RESET_REG_RESET_MODULE;
+ 	else
+-		BUG();
++		panic("Reset register not defined for this SOC");
+ 
+ 	spin_lock_irqsave(&ath79_device_reset_lock, flags);
+ 	t = ath79_reset_rr(reg);
+@@ -134,7 +134,7 @@ void ath79_device_reset_clear(u32 mask)
+ 	else if (soc_is_qca955x())
+ 		reg = QCA955X_RESET_REG_RESET_MODULE;
+ 	else
+-		BUG();
++		panic("Reset register not defined for this SOC");
+ 
+ 	spin_lock_irqsave(&ath79_device_reset_lock, flags);
+ 	t = ath79_reset_rr(reg);

target/linux/ar71xx/patches-4.14/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch

@@ -0,0 +1,113 @@
+From 460f382c278fe66059a773c41cbcd0db86d53983 Mon Sep 17 00:00:00 2001
+From: Mathias Kresin <[email protected]>
+Date: Thu, 13 Apr 2017 09:47:42 +0200
+Subject: [PATCH] MIPS: pci-ar724x: get PCIe controller out of reset
+
+The ar724x pci driver expects the PCIe controller to be brought out of
+reset by the bootloader.
+
+At least the AVM Fritz 300E bootloader doesn't take care of releasing
+the different PCIe controller related resets which causes an endless
+hang as soon as either the PCIE Reset register (0x180f0018) or the PCI
+Application Control register (0x180f0000) is read from.
+
+Do the full "PCIE Root Complex Initialization Sequence" if the PCIe
+host controller is still in reset during probing.
+
+The QCA u-boot sleeps 10ms after the PCIE Application Control bit is
+set to ready. It has been shown that 10ms might not be enough time if
+PCIe should be used right after setting the bit. During my tests it
+took up to 20ms till the link was up. Giving the link up to 100ms
+should work for all cases.
+
+Signed-off-by: Mathias Kresin <[email protected]>
+---
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h |  3 ++
+ arch/mips/pci/pci-ar724x.c                     | 42 ++++++++++++++++++++++++++
+ 2 files changed, 45 insertions(+)
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -169,6 +169,9 @@
+ #define AR724X_PLL_REG_CPU_CONFIG	0x00
+ #define AR724X_PLL_REG_PCIE_CONFIG	0x10
+ 
++#define AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS	BIT(16)
++#define AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET	BIT(25)
++
+ #define AR724X_PLL_FB_SHIFT		0
+ #define AR724X_PLL_FB_MASK		0x3ff
+ #define AR724X_PLL_REF_DIV_SHIFT	10
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -12,14 +12,18 @@
+ #include <linux/irq.h>
+ #include <linux/pci.h>
+ #include <linux/init.h>
++#include <linux/delay.h>
+ #include <linux/platform_device.h>
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ 
++#define AR724X_PCI_REG_APP		0x0
+ #define AR724X_PCI_REG_RESET		0x18
+ #define AR724X_PCI_REG_INT_STATUS	0x4c
+ #define AR724X_PCI_REG_INT_MASK		0x50
+ 
++#define AR724X_PCI_APP_LTSSM_ENABLE	BIT(0)
++
+ #define AR724X_PCI_RESET_LINK_UP	BIT(0)
+ 
+ #define AR724X_PCI_INT_DEV0		BIT(14)
+@@ -325,6 +329,37 @@ static void ar724x_pci_irq_init(struct a
+ 					 apc);
+ }
+ 
++static void ar724x_pci_hw_init(struct ar724x_pci_controller *apc)
++{
++	u32 ppl, app;
++	int wait = 0;
++
++	/* deassert PCIe host controller and PCIe PHY reset */
++	ath79_device_reset_clear(AR724X_RESET_PCIE);
++	ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
++
++	/* remove the reset of the PCIE PLL */
++	ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
++	ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
++	ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
++
++	/* deassert bypass for the PCIE PLL */
++	ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
++	ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
++	ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
++
++	/* set PCIE Application Control to ready */
++	app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP);
++	app |= AR724X_PCI_APP_LTSSM_ENABLE;
++	__raw_writel(app, apc->ctrl_base + AR724X_PCI_REG_APP);
++
++	/* wait up to 100ms for PHY link up */
++	do {
++		mdelay(10);
++		wait++;
++	} while (wait < 10 && !ar724x_pci_check_link(apc));
++}
++
+ static int ar724x_pci_probe(struct platform_device *pdev)
+ {
+ 	struct ar724x_pci_controller *apc;
+@@ -383,6 +418,13 @@ static int ar724x_pci_probe(struct platf
+ 	apc->pci_controller.io_resource = &apc->io_res;
+ 	apc->pci_controller.mem_resource = &apc->mem_res;
+ 
++	/*
++	 * Do the full PCIE Root Complex Initialization Sequence if the PCIe
++	 * host controller is in reset.
++	 */
++	if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
++		ar724x_pci_hw_init(apc);
++
+ 	apc->link_up = ar724x_pci_check_link(apc);
+ 	if (!apc->link_up)
+ 		dev_warn(&pdev->dev, "PCIe link is down\n");

target/linux/ar71xx/patches-4.14/200-MIPS-ath79-fix-ar933x-wmac-reset.patch

@@ -0,0 +1,30 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -62,10 +62,26 @@ static void __init ar913x_wmac_setup(voi
+ 
+ static int ar933x_wmac_reset(void)
+ {
++	int retries = 20;
++
+ 	ath79_device_reset_set(AR933X_RESET_WMAC);
+ 	ath79_device_reset_clear(AR933X_RESET_WMAC);
+ 
+-	return 0;
++	while (1) {
++		u32 bootstrap;
++
++		bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
++		if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0)
++			return 0;
++
++		if (retries-- == 0)
++			break;
++
++		udelay(10000);
++	}
++
++	pr_err("ar933x: WMAC reset timed out");
++	return -ETIMEDOUT;
+ }
+ 
+ static int ar933x_r1_get_wmac_revision(void)

target/linux/ar71xx/patches-4.14/201-ar913x_wmac_external_reset.patch

@@ -0,0 +1,31 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -44,7 +44,7 @@ static struct platform_device ath79_wmac
+ 	},
+ };
+ 
+-static void __init ar913x_wmac_setup(void)
++static int ar913x_wmac_reset(void)
+ {
+ 	/* reset the WMAC */
+ 	ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
+@@ -53,10 +53,19 @@ static void __init ar913x_wmac_setup(voi
+ 	ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
+ 	mdelay(10);
+ 
++	return 0;
++}
++
++static void __init ar913x_wmac_setup(void)
++{
++	ar913x_wmac_reset();
++
+ 	ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
+ 	ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
+ 	ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
+ 	ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
++
++	ath79_wmac_data.external_reset = ar913x_wmac_reset;
+ }
+ 
+ 

target/linux/ar71xx/patches-4.14/202-MIPS-ath79-ar934x-wmac-revision.patch

@@ -0,0 +1,11 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -139,6 +139,8 @@ static void ar934x_wmac_setup(void)
+ 		ath79_wmac_data.is_clk_25mhz = false;
+ 	else
+ 		ath79_wmac_data.is_clk_25mhz = true;
++
++	ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
+ }
+ 
+ static void qca955x_wmac_setup(void)

target/linux/ar71xx/patches-4.14/203-MIPS-ath79-fix-restart.patch

@@ -0,0 +1,20 @@
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -40,6 +40,7 @@ static char ath79_sys_type[ATH79_SYS_TYP
+ 
+ static void ath79_restart(char *command)
+ {
++	local_irq_disable();
+ 	ath79_device_reset_set(AR71XX_RESET_FULL_CHIP);
+ 	for (;;)
+ 		if (cpu_wait)
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -135,6 +135,7 @@ static inline u32 ath79_pll_rr(unsigned
+ static inline void ath79_reset_wr(unsigned reg, u32 val)
+ {
+ 	__raw_writel(val, ath79_reset_base + reg);
++	(void) __raw_readl(ath79_reset_base + reg); /* flush */
+ }
+ 
+ static inline u32 ath79_reset_rr(unsigned reg)

target/linux/ar71xx/patches-4.14/220-add_cpu_feature_overrides.patch

@@ -0,0 +1,28 @@
+--- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
++++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
+@@ -36,6 +36,7 @@
+ #define cpu_has_mdmx		0
+ #define cpu_has_mips3d		0
+ #define cpu_has_smartmips	0
++#define cpu_has_rixi		0
+ 
+ #define cpu_has_mips32r1	1
+ #define cpu_has_mips32r2	1
+@@ -43,6 +44,7 @@
+ #define cpu_has_mips64r2	0
+ 
+ #define cpu_has_mipsmt		0
++#define cpu_has_userlocal	0
+ 
+ #define cpu_has_64bits		0
+ #define cpu_has_64bit_zero_reg	0
+@@ -51,5 +53,9 @@
+ 
+ #define cpu_dcache_line_size()	32
+ #define cpu_icache_line_size()	32
++#define cpu_has_vtag_icache	0
++#define cpu_has_dc_aliases	1
++#define cpu_has_ic_fills_f_dc	0
++#define cpu_has_pindexed_dcache	0
+ 
+ #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */

target/linux/ar71xx/patches-4.14/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch

@@ -0,0 +1,21 @@
+--- a/arch/mips/include/asm/mips_machine.h
++++ b/arch/mips/include/asm/mips_machine.h
+@@ -36,6 +36,18 @@ static struct mips_machine machine_##_ty
+ 	.mach_setup	= _setup,				\
+ };
+ 
++#define MIPS_MACHINE_NONAME(_type, _id, _setup)		\
++static const char machine_id_##_type[] __initconst		\
++			__aligned(1) = _id;			\
++static struct mips_machine machine_##_type			\
++		__used __section(.mips.machines.init) =		\
++{								\
++	.mach_type	= _type,				\
++	.mach_id	= machine_id_##_type,			\
++	.mach_name	= NULL,					\
++	.mach_setup	= _setup,				\
++};
++
+ extern long __mips_machines_start;
+ extern long __mips_machines_end;
+ 

target/linux/ar71xx/patches-4.14/310-lib-add-rle-decompression.patch

@@ -0,0 +1,124 @@
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -247,6 +247,9 @@ config LZMA_COMPRESS
+ config LZMA_DECOMPRESS
+     tristate
+ 
++config RLE_DECOMPRESS
++	tristate
++
+ #
+ # These all provide a common interface (hence the apparent duplication with
+ # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -120,6 +120,7 @@ obj-$(CONFIG_XZ_DEC) += xz/
+ obj-$(CONFIG_RAID6_PQ) += raid6/
+ obj-$(CONFIG_LZMA_COMPRESS) += lzma/
+ obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
++obj-$(CONFIG_RLE_DECOMPRESS) += rle.o
+ 
+ lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+ lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+--- /dev/null
++++ b/include/linux/rle.h
+@@ -0,0 +1,18 @@
++#ifndef _RLE_H_
++#define _RLE_H_
++
++#ifdef CONFIG_RLE_DECOMPRESS
++int rle_decode(const unsigned char *src, size_t srclen,
++	       unsigned char *dst, size_t dstlen,
++	       size_t *src_done, size_t *dst_done);
++#else
++static inline int
++rle_decode(const unsigned char *src, size_t srclen,
++	   unsigned char *dst, size_t dstlen,
++	   size_t *src_done, size_t *dst_done)
++{
++	return -ENOTSUPP;
++}
++#endif /* CONFIG_RLE_DECOMPRESS */
++
++#endif /* _RLE_H_ */
+--- /dev/null
++++ b/lib/rle.c
+@@ -0,0 +1,78 @@
++/*
++ *  RLE decoding routine
++ *
++ *  Copyright (C) 2012 Gabor Juhos <[email protected]>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/rle.h>
++
++int rle_decode(const unsigned char *src, size_t srclen,
++	       unsigned char *dst, size_t dstlen,
++	       size_t *src_done, size_t *dst_done)
++{
++	size_t srcpos, dstpos;
++	int ret;
++
++	srcpos = 0;
++	dstpos = 0;
++	ret = -EINVAL;
++
++	/* sanity checks */
++	if (!src || !srclen || !dst || !dstlen)
++		goto out;
++
++	while (1) {
++		char count;
++
++		if (srcpos >= srclen)
++			break;
++
++		count = (char) src[srcpos++];
++		if (count == 0) {
++			ret = 0;
++			break;
++		}
++
++		if (count > 0) {
++			unsigned char c;
++
++			if (srcpos >= srclen)
++				break;
++
++			c = src[srcpos++];
++
++			while (count--) {
++				if (dstpos >= dstlen)
++					break;
++
++				dst[dstpos++] = c;
++			}
++		} else {
++			count *= -1;
++
++			while (count--) {
++				if (srcpos >= srclen)
++					break;
++				if (dstpos >= dstlen)
++					break;
++				dst[dstpos++] = src[srcpos++];
++			}
++		}
++	}
++
++out:
++	if (src_done)
++		*src_done = srcpos;
++	if (dst_done)
++		*dst_done = dstpos;
++
++	return ret;
++}
++
++EXPORT_SYMBOL_GPL(rle_decode);

target/linux/ar71xx/patches-4.14/401-mtd-physmap-add-lock-unlock.patch

@@ -0,0 +1,94 @@
+--- a/drivers/mtd/maps/physmap.c
++++ b/drivers/mtd/maps/physmap.c
+@@ -31,6 +31,66 @@ struct physmap_flash_info {
+ 	int			vpp_refcnt;
+ };
+ 
++static struct platform_device *physmap_map2pdev(struct map_info *map)
++{
++	return (struct platform_device *) map->map_priv_1;
++}
++
++static void physmap_lock(struct map_info *map)
++{
++	struct platform_device *pdev;
++	struct physmap_flash_data *physmap_data;
++
++	pdev = physmap_map2pdev(map);
++	physmap_data = pdev->dev.platform_data;
++	physmap_data->lock(pdev);
++}
++
++static void physmap_unlock(struct map_info *map)
++{
++	struct platform_device *pdev;
++	struct physmap_flash_data *physmap_data;
++
++	pdev = physmap_map2pdev(map);
++	physmap_data = pdev->dev.platform_data;
++	physmap_data->unlock(pdev);
++}
++
++static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs)
++{
++	map_word ret;
++
++	physmap_lock(map);
++	ret = inline_map_read(map, ofs);
++	physmap_unlock(map);
++
++	return ret;
++}
++
++static void physmap_flash_write_lock(struct map_info *map, map_word d,
++				     unsigned long ofs)
++{
++	physmap_lock(map);
++	inline_map_write(map, d, ofs);
++	physmap_unlock(map);
++}
++
++static void physmap_flash_copy_from_lock(struct map_info *map, void *to,
++					 unsigned long from, ssize_t len)
++{
++	physmap_lock(map);
++	inline_map_copy_from(map, to, from, len);
++	physmap_unlock(map);
++}
++
++static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to,
++				       const void *from, ssize_t len)
++{
++	physmap_lock(map);
++	inline_map_copy_to(map, to, from, len);
++	physmap_unlock(map);
++}
++
+ static int physmap_flash_remove(struct platform_device *dev)
+ {
+ 	struct physmap_flash_info *info;
+@@ -153,6 +213,13 @@ static int physmap_flash_probe(struct pl
+ 
+ 		simple_map_init(&info->map[i]);
+ 
++		if (physmap_data->lock && physmap_data->unlock) {
++			info->map[i].read = physmap_flash_read_lock;
++			info->map[i].write = physmap_flash_write_lock;
++			info->map[i].copy_from = physmap_flash_copy_from_lock;
++			info->map[i].copy_to = physmap_flash_copy_to_lock;
++		}
++
+ 		probe_type = rom_probe_types;
+ 		if (physmap_data->probe_type == NULL) {
+ 			for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
+--- a/include/linux/mtd/physmap.h
++++ b/include/linux/mtd/physmap.h
+@@ -25,6 +25,8 @@ struct physmap_flash_data {
+ 	unsigned int		width;
+ 	int			(*init)(struct platform_device *);
+ 	void			(*exit)(struct platform_device *);
++	void			(*lock)(struct platform_device *);
++	void			(*unlock)(struct platform_device *);
+ 	void			(*set_vpp)(struct platform_device *, int);
+ 	unsigned int		nr_parts;
+ 	unsigned int		pfow_base;

target/linux/ar71xx/patches-4.14/402-mtd-SST39VF6401B-support.patch

@@ -0,0 +1,29 @@
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
+@@ -148,6 +148,7 @@
+ #define SST39LF160	0x2782
+ #define SST39VF1601	0x234b
+ #define SST39VF3201	0x235b
++#define SST39VF6401B	0x236d
+ #define SST39WF1601	0x274b
+ #define SST39WF1602	0x274a
+ #define SST39LF512	0x00D4
+@@ -1569,6 +1570,18 @@ static const struct amd_flash_info jedec
+ 			ERASEINFO(0x10000,64),
+ 		}
+ 	}, {
++		.mfr_id         = CFI_MFR_SST,
++		.dev_id         = SST39VF6401B,
++		.name           = "SST 39VF6401B",
++		.devtypes       = CFI_DEVICETYPE_X16,
++		.uaddr          = MTD_UADDR_0xAAAA_0x5555,
++		.dev_size       = SIZE_8MiB,
++		.cmd_set        = P_ID_AMD_STD,
++		.nr_regions     = 1,
++		.regions        = {
++			ERASEINFO(0x10000,128)
++		}
++	}, {
+ 		.mfr_id		= CFI_MFR_ST,
+ 		.dev_id		= M29F800AB,
+ 		.name		= "ST M29F800AB",

target/linux/ar71xx/patches-4.14/404-mtd-cybertan-trx-parser.patch

@@ -0,0 +1,25 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -178,6 +178,12 @@ menu "Partition parsers"
+ source "drivers/mtd/parsers/Kconfig"
+ endmenu
+ 
++config MTD_CYBERTAN_PARTS
++	tristate "Cybertan partitioning support"
++	depends on ATH79
++	---help---
++	   Cybertan partitioning support
++
+ config MTD_MYLOADER_PARTS
+ 	tristate "MyLoader partition parsing"
+ 	depends on ADM5120 || ATH25 || ATH79
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63
+ obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ obj-y				+= parsers/
++obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o
+ 
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_BLKDEVS)	+= mtd_blkdevs.o

target/linux/ar71xx/patches-4.14/405-mtd-tp-link-partition-parser.patch

@@ -0,0 +1,25 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -200,6 +200,12 @@ config MTD_MYLOADER_PARTS
+ 	  You will still need the parsing functions to be called by the driver
+ 	  for your particular device. It won't happen automatically.
+ 
++config MTD_TPLINK_PARTS
++	tristate "TP-Link AR7XXX/AR9XXX partitioning support"
++	depends on ATH79
++	---help---
++	  TBD.
++
+ comment "User Modules And Translation Layers"
+ 
+ #
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63
+ obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ obj-y				+= parsers/
++obj-$(CONFIG_MTD_TPLINK_PARTS)	+= tplinkpart.o
+ obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o
+ 
+ # 'Users' - code which presents functionality to userspace.

target/linux/ar71xx/patches-4.14/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch

@@ -0,0 +1,34 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -195,6 +195,7 @@ static ssize_t m25p80_read(struct spi_no
+  */
+ static int m25p_probe(struct spi_device *spi)
+ {
++	struct mtd_part_parser_data	ppdata = {0,};
+ 	struct flash_platform_data	*data;
+ 	struct m25p *flash;
+ 	struct spi_nor *nor;
+@@ -247,8 +248,11 @@ static int m25p_probe(struct spi_device
+ 	if (ret)
+ 		return ret;
+ 
+-	return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
+-				   data ? data->nr_parts : 0);
++	return mtd_device_parse_register(&nor->mtd,
++			data ? data->part_probes : NULL,
++			&ppdata,
++			data ? data->parts : NULL,
++ 			data ? data->nr_parts : 0);
+ }
+ 
+ 
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -24,6 +24,7 @@ struct flash_platform_data {
+ 	unsigned int	nr_parts;
+ 
+ 	char		*type;
++	const char	**part_probes;
+ 
+ 	/* we'll likely add more ... use JEDEC IDs, etc */
+ };

target/linux/ar71xx/patches-4.14/408-mtd-redboot_partition_scan.patch

@@ -0,0 +1,44 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -77,12 +77,18 @@ static int parse_redboot_partitions(stru
+ 	static char nullstring[] = "unallocated";
+ #endif
+ 
++	buf = vmalloc(master->erasesize);
++	if (!buf)
++		return -ENOMEM;
++
++ restart:
+ 	if ( directory < 0 ) {
+ 		offset = master->size + directory * master->erasesize;
+ 		while (mtd_block_isbad(master, offset)) {
+ 			if (!offset) {
+ 			nogood:
+ 				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++				vfree(buf);
+ 				return -EIO;
+ 			}
+ 			offset -= master->erasesize;
+@@ -95,10 +101,6 @@ static int parse_redboot_partitions(stru
+ 				goto nogood;
+ 		}
+ 	}
+-	buf = vmalloc(master->erasesize);
+-
+-	if (!buf)
+-		return -ENOMEM;
+ 
+ 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ 	       master->name, offset);
+@@ -171,6 +173,11 @@ static int parse_redboot_partitions(stru
+ 	}
+ 	if (i == numslots) {
+ 		/* Didn't find it */
++		if (offset + master->erasesize < master->size) {
++			/* not at the end of the flash yet, maybe next block :) */
++			directory++;
++			goto restart;
++		}
+ 		printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ 		       master->name);
+ 		ret = 0;

target/linux/ar71xx/patches-4.14/409-mtd-rb4xx_nand_driver.patch

@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -569,4 +569,8 @@ config MTD_NAND_MTK
+ 	  Enables support for NAND controller on MTK SoCs.
+ 	  This controller is found on mt27xx, mt81xx, mt65xx SoCs.
+ 
++config MTD_NAND_RB4XX
++	tristate "NAND flash driver for RouterBoard 4xx series"
++	depends on MTD_NAND && ATH79_MACH_RB4XX
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx27
+ obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
++obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
+ obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o

target/linux/ar71xx/patches-4.14/410-mtd-rb750-nand-driver.patch

@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -573,4 +573,8 @@ config MTD_NAND_RB4XX
+ 	tristate "NAND flash driver for RouterBoard 4xx series"
+ 	depends on MTD_NAND && ATH79_MACH_RB4XX
+ 
++config MTD_NAND_RB750
++	tristate "NAND flash driver for the RouterBoard 750"
++	depends on MTD_NAND && ATH79_MACH_RB750
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx
+ obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
++obj-$(CONFIG_MTD_NAND_RB750)		+= rb750_nand.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
+ obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o

target/linux/ar71xx/patches-4.14/411-mtd-cfi_cmdset_0002-force-word-write.patch

@@ -0,0 +1,61 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -40,7 +40,7 @@
+ #include <linux/mtd/xip.h>
+ 
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+ 
+ #define MAX_RETRIES 3
+ 
+@@ -51,7 +51,9 @@
+ 
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -202,6 +204,7 @@ static void fixup_amd_bootblock(struct m
+ }
+ #endif
+ 
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ {
+ 	struct map_info *map = mtd->priv;
+@@ -211,6 +214,7 @@ static void fixup_use_write_buffers(stru
+ 		mtd->_write = cfi_amdstd_write_buffers;
+ 	}
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
+@@ -1788,6 +1792,7 @@ static int cfi_amdstd_write_words(struct
+ /*
+  * FIXME: interleaved mode not tested, and probably not supported!
+  */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+ 				    unsigned long adr, const u_char *buf,
+ 				    int len)
+@@ -1916,7 +1921,6 @@ static int __xipram do_write_buffer(stru
+ 	return ret;
+ }
+ 
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+ 				    size_t *retlen, const u_char *buf)
+ {
+@@ -1991,6 +1995,7 @@ static int cfi_amdstd_write_buffers(stru
+ 
+ 	return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /*
+  * Wait for the flash chip to become ready to write data

target/linux/ar71xx/patches-4.14/413-mtd-ar934x-nand-driver.patch

@@ -0,0 +1,25 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -577,4 +577,12 @@ config MTD_NAND_RB750
+ 	tristate "NAND flash driver for the RouterBoard 750"
+ 	depends on MTD_NAND && ATH79_MACH_RB750
+ 
++config MTD_NAND_AR934X
++	tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
++	depends on (SOC_AR934X || SOC_QCA955X)
++
++config MTD_NAND_AR934X_HW_ECC
++	bool "Hardware ECC support for the AR934X NAND Controller (EXPERIMENTAL)"
++	depends on MTD_NAND_AR934X
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-
+ obj-$(CONFIG_MTD_NAND_DENALI)		+= denali.o
+ obj-$(CONFIG_MTD_NAND_DENALI_PCI)	+= denali_pci.o
+ obj-$(CONFIG_MTD_NAND_DENALI_DT)	+= denali_dt.o
++obj-$(CONFIG_MTD_NAND_AR934X)		+= ar934x_nfc.o
+ obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
+ obj-$(CONFIG_MTD_NAND_BF5XX)		+= bf5xx_nand.o
+ obj-$(CONFIG_MTD_NAND_S3C2410)		+= s3c2410.o

target/linux/ar71xx/patches-4.14/414-mtd-rb91x-nand-driver.patch

@@ -0,0 +1,23 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -577,6 +577,10 @@ config MTD_NAND_RB750
+ 	tristate "NAND flash driver for the RouterBoard 750"
+ 	depends on MTD_NAND && ATH79_MACH_RB750
+ 
++config MTD_NAND_RB91X
++	tristate "NAND flash driver for the RouterBOARD 91x series"
++	depends on MTD_NAND && ATH79_MACH_RB91X
++
+ config MTD_NAND_AR934X
+ 	tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
+ 	depends on (SOC_AR934X || SOC_QCA955X)
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -36,6 +36,7 @@ obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nan
+ obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
+ obj-$(CONFIG_MTD_NAND_RB750)		+= rb750_nand.o
++obj-$(CONFIG_MTD_NAND_RB91X)		+= rb91x_nand.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
+ obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o

target/linux/ar71xx/patches-4.14/420-net-ar71xx_mac_driver.patch

@@ -0,0 +1,28 @@
+--- a/drivers/net/ethernet/atheros/Kconfig
++++ b/drivers/net/ethernet/atheros/Kconfig
+@@ -5,7 +5,7 @@
+ config NET_VENDOR_ATHEROS
+ 	bool "Atheros devices"
+ 	default y
+-	depends on PCI
++	depends on (PCI || ATH79)
+ 	---help---
+ 	  If you have a network (Ethernet) card belonging to this class, say Y.
+ 
+@@ -78,4 +78,6 @@ config ALX
+ 	  To compile this driver as a module, choose M here.  The module
+ 	  will be called alx.
+ 
++source drivers/net/ethernet/atheros/ag71xx/Kconfig
++
+ endif # NET_VENDOR_ATHEROS
+--- a/drivers/net/ethernet/atheros/Makefile
++++ b/drivers/net/ethernet/atheros/Makefile
+@@ -2,6 +2,7 @@
+ # Makefile for the Atheros network device drivers.
+ #
+ 
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_ATL1) += atlx/
+ obj-$(CONFIG_ATL2) += atlx/
+ obj-$(CONFIG_ATL1E) += atl1e/

target/linux/ar71xx/patches-4.14/423-dsa-add-88e6063-driver.patch

@@ -0,0 +1,31 @@
+Index: linux-4.14.61/drivers/net/dsa/Kconfig
+===================================================================
+--- linux-4.14.61.orig/drivers/net/dsa/Kconfig
++++ linux-4.14.61/drivers/net/dsa/Kconfig
+@@ -3,6 +3,14 @@ menu "Distributed Switch Architecture dr
+ 
+ source "drivers/net/dsa/b53/Kconfig"
+ 
++config NET_DSA_MV88E6063
++	bool "Marvell 88E6063 ethernet switch chip support"
++	depends on NET_DSA
++	select NET_DSA_TAG_TRAILER
++	---help---
++	  This enables support for the Marvell 88E6063 ethernet switch
++	  chip
++
+ config NET_DSA_BCM_SF2
+ 	tristate "Broadcom Starfighter 2 Ethernet switch support"
+ 	depends on HAS_IOMEM && NET_DSA && OF_MDIO
+Index: linux-4.14.61/drivers/net/dsa/Makefile
+===================================================================
+--- linux-4.14.61.orig/drivers/net/dsa/Makefile
++++ linux-4.14.61/drivers/net/dsa/Makefile
+@@ -7,6 +7,7 @@ obj-$(CONFIG_FIXED_PHY)		+= dsa_loop_bdi
+ endif
+ obj-$(CONFIG_NET_DSA_MT7530)	+= mt7530.o
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
++obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
+ obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
+ obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
+ obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o

target/linux/ar71xx/patches-4.14/430-drivers-link-spi-before-mtd.patch

@@ -0,0 +1,12 @@
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -77,8 +77,8 @@ obj-$(CONFIG_SCSI)		+= scsi/
+ obj-y				+= nvme/
+ obj-$(CONFIG_ATA)		+= ata/
+ obj-$(CONFIG_TARGET_CORE)	+= target/
+-obj-$(CONFIG_MTD)		+= mtd/
+ obj-$(CONFIG_SPI)		+= spi/
++obj-$(CONFIG_MTD)		+= mtd/
+ obj-$(CONFIG_SPMI)		+= spmi/
+ obj-$(CONFIG_HSI)		+= hsi/
+ obj-y				+= net/