remove 2.6.28 support, we never really used it

SVN-Revision: 18156

target/linux/brcm63xx/patches-2.6.28/001-add_broadcom_63xx_cpu_definitions.patch

@@ -1,95 +0,0 @@
-From a9f65413f9ea81ef2208da66a3db9cb8a9020eef Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <[email protected]>
-Date: Fri, 18 Jul 2008 15:53:08 +0200
-Subject: [PATCH] [MIPS] BCM63XX: Add Broadcom 63xx CPU definitions.
-
-Signed-off-by: Maxime Bizon <[email protected]>
----
- arch/mips/kernel/cpu-probe.c |   25 +++++++++++++++++++++++++
- arch/mips/mm/tlbex.c         |    4 ++++
- arch/mips/include/asm/cpu.h       |    7 +++++++
- 3 files changed, 36 insertions(+), 0 deletions(-)
-
---- a/arch/mips/kernel/cpu-probe.c
-+++ b/arch/mips/kernel/cpu-probe.c
-@@ -154,6 +154,9 @@ void __init check_wait(void)
- 	case CPU_25KF:
- 	case CPU_PR4450:
- 	case CPU_BCM3302:
-+	case CPU_BCM6338:
-+	case CPU_BCM6348:
-+	case CPU_BCM6358:
- 		cpu_wait = r4k_wait;
- 		break;
- 
-@@ -864,6 +867,7 @@ static inline void cpu_probe_broadcom(st
- {
- 	decode_configs(c);
- 	switch (c->processor_id & 0xff00) {
-+	/* same as PRID_IMP_BCM6338 */
- 	case PRID_IMP_BCM3302:
- 		c->cputype = CPU_BCM3302;
- 		__cpu_name[cpu] = "Broadcom BCM3302";
-@@ -872,6 +876,26 @@ static inline void cpu_probe_broadcom(st
- 		c->cputype = CPU_BCM4710;
- 		__cpu_name[cpu] = "Broadcom BCM4710";
- 		break;
-+	case PRID_IMP_BCM6345:
-+		c->cputype = CPU_BCM6345;
-+		__cpu_name[cpu] = "Broadcom BCM6345";
-+		break;
-+	case PRID_IMP_BCM6348:
-+		c->cputype = CPU_BCM6348;
-+		__cpu_name[cpu] = "Broadcom BCM6348";
-+		break;
-+	case PRID_IMP_BCM4350:
-+		switch (c->processor_id & 0xf0) {
-+		case PRID_REV_BCM6358:
-+			c->cputype = CPU_BCM6358;
-+			__cpu_name[cpu] = "Broadcom BCM6358";
-+			break;
-+		default:
-+			c->cputype = CPU_UNKNOWN;
-+			__cpu_name[cpu] = "Broadcom BCM63xx";
-+			break;
-+		}
-+		break;
- 	}
- }
- 
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -317,6 +317,10 @@ static void __cpuinit build_tlb_write_en
- 	case CPU_BCM3302:
- 	case CPU_BCM4710:
- 	case CPU_LOONGSON2:
-+	case CPU_BCM6338:
-+	case CPU_BCM6345:
-+	case CPU_BCM6348:
-+	case CPU_BCM6358:
- 		if (m4kc_tlbp_war())
- 			uasm_i_nop(p);
- 		tlbw(p);
---- a/arch/mips/include/asm/cpu.h
-+++ b/arch/mips/include/asm/cpu.h
-@@ -112,6 +112,12 @@
- 
- #define PRID_IMP_BCM4710	0x4000
- #define PRID_IMP_BCM3302	0x9000
-+#define PRID_IMP_BCM6338	0x9000
-+#define PRID_IMP_BCM6345	0x8000
-+#define PRID_IMP_BCM6348	0x9100
-+#define PRID_IMP_BCM4350	0xA000
-+#define PRID_REV_BCM6358	0x0010
-+#define PRID_REV_BCM6368	0x0030
- 
- /*
-  * Definitions for 7:0 on legacy processors
-@@ -198,6 +204,7 @@ enum cpu_type_enum {
- 	CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
- 	CPU_AU1000, CPU_AU1100, CPU_AU1200, CPU_AU1210, CPU_AU1250, CPU_AU1500,
- 	CPU_AU1550, CPU_PR4450, CPU_BCM3302, CPU_BCM4710,
-+	CPU_BCM6338, CPU_BCM6345, CPU_BCM6348, CPU_BCM6358,
- 
- 	/*
- 	 * MIPS64 class processors

target/linux/brcm63xx/patches-2.6.28/002-add_support_for_broadcom_63xx_cpus.patch

@@ -1,122 +0,0 @@
-From 0713aadd2a4e543b69022aa40bdec3e1dc5bc1e5 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <[email protected]>
-Date: Mon, 18 Aug 2008 13:56:57 +0200
-Subject: [PATCH] [MIPS] BCM63XX: Add support for Broadcom 63xx CPUs.
-
-Signed-off-by: Maxime Bizon <[email protected]>
----
- arch/mips/Kconfig                                  |   16 +
- arch/mips/Makefile                                 |    7 +
- arch/mips/bcm63xx/Kconfig                          |    9 +
- arch/mips/bcm63xx/Makefile                         |    2 +
- arch/mips/bcm63xx/clk.c                            |  220 ++++++
- arch/mips/bcm63xx/cpu.c                            |  245 +++++++
- arch/mips/bcm63xx/cs.c                             |  144 ++++
- arch/mips/bcm63xx/early_printk.c                   |   30 +
- arch/mips/bcm63xx/gpio.c                           |   98 +++
- arch/mips/bcm63xx/irq.c                            |  253 +++++++
- arch/mips/bcm63xx/prom.c                           |   43 ++
- arch/mips/bcm63xx/setup.c                          |  108 +++
- arch/mips/bcm63xx/timer.c                          |  205 ++++++
- arch/mips/include/asm/fixmap.h                          |    4 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h        |   11 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h        |  314 +++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h         |   10 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h       |   14 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h         |   93 +++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h        |   15 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h       |  728 ++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h      |   11 +
- .../asm-mips/mach-bcm63xx/cpu-feature-overrides.h  |   51 ++
- arch/mips/include/asm/mach-bcm63xx/gpio.h               |   52 ++
- arch/mips/include/asm/mach-bcm63xx/war.h                |   25 +
- 25 files changed, 2708 insertions(+), 0 deletions(-)
- create mode 100644 arch/mips/bcm63xx/Kconfig
- create mode 100644 arch/mips/bcm63xx/Makefile
- create mode 100644 arch/mips/bcm63xx/clk.c
- create mode 100644 arch/mips/bcm63xx/cpu.c
- create mode 100644 arch/mips/bcm63xx/cs.c
- create mode 100644 arch/mips/bcm63xx/early_printk.c
- create mode 100644 arch/mips/bcm63xx/gpio.c
- create mode 100644 arch/mips/bcm63xx/irq.c
- create mode 100644 arch/mips/bcm63xx/prom.c
- create mode 100644 arch/mips/bcm63xx/setup.c
- create mode 100644 arch/mips/bcm63xx/timer.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/gpio.h
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/war.h
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -60,6 +60,21 @@ config BCM47XX
- 	help
- 	 Support for BCM47XX based boards
- 
-+config BCM63XX
-+	bool "Broadcom 63xx based boards"
-+	select CEVT_R4K
-+	select CSRC_R4K
-+	select DMA_NONCOHERENT
-+	select IRQ_CPU
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select SYS_SUPPORTS_BIG_ENDIAN
-+	select SYS_HAS_EARLY_PRINTK
-+	select SWAP_IO_SPACE
-+	select ARCH_REQUIRE_GPIOLIB
-+	help
-+	 Support for BCM63XX based boards
-+
- config MIPS_COBALT
- 	bool "Cobalt Server"
- 	select CEVT_R4K
-@@ -599,6 +614,7 @@ endchoice
- 
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/basler/excite/Kconfig"
-+source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/emma/Kconfig"
- source "arch/mips/jazz/Kconfig"
- source "arch/mips/lasat/Kconfig"
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -553,6 +553,13 @@ cflags-$(CONFIG_BCM47XX)	+= -I$(srctree)
- load-$(CONFIG_BCM47XX)		:= 0xffffffff80001000
- 
- #
-+# Broadcom BCM63XX boards
-+#
-+core-$(CONFIG_BCM63XX)		+= arch/mips/bcm63xx/
-+cflags-$(CONFIG_BCM63XX)	+= -Iarch/mips/include/asm/mach-bcm63xx/
-+load-$(CONFIG_BCM63XX)		:= 0xffffffff80010000
-+
-+#
- # SNI RM
- #
- core-$(CONFIG_SNI_RM)		+= arch/mips/sni/
---- a/arch/mips/include/asm/fixmap.h
-+++ b/arch/mips/include/asm/fixmap.h
-@@ -67,11 +67,15 @@ enum fixed_addresses {
-  * the start of the fixmap, and leave one page empty
-  * at the top of mem..
-  */
-+#ifdef CONFIG_BCM63XX
-+#define FIXADDR_TOP     ((unsigned long)(long)(int)0xff000000)
-+#else
- #if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX)
- #define FIXADDR_TOP	((unsigned long)(long)(int)(0xff000000 - 0x20000))
- #else
- #define FIXADDR_TOP	((unsigned long)(long)(int)0xfffe0000)
- #endif
-+#endif
- #define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
- #define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
- 

target/linux/brcm63xx/patches-2.6.28/003-add_serial_driver_for_bcm63xx_integr.patch

@@ -1,66 +0,0 @@
-From 6c489656b09998ed6a6f857e01ccf630e29358dd Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <[email protected]>
-Date: Fri, 18 Jul 2008 19:35:55 +0200
-Subject: [PATCH] [MIPS] BCM63XX: Add serial driver for bcm63xx integrated UART.
-
-Signed-off-by: Maxime Bizon <[email protected]>
----
- arch/mips/bcm63xx/Makefile                       |    1 +
- arch/mips/bcm63xx/dev-uart.c                     |   41 +
- drivers/serial/Kconfig                           |   19 +
- drivers/serial/Makefile                          |    1 +
- drivers/serial/bcm63xx_uart.c                    |  890 ++++++++++++++++++++++
- include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h |    6 +
- include/linux/serial_core.h                      |    2 +
- 7 files changed, 960 insertions(+), 0 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-uart.c
- create mode 100644 drivers/serial/bcm63xx_uart.c
- create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h
-
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -1372,4 +1372,23 @@ config SPORT_BAUD_RATE
- 	default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
- 	default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
- 
-+config SERIAL_BCM63XX
-+	tristate "bcm63xx serial port support"
-+	select SERIAL_CORE
-+	depends on BCM63XX
-+	help
-+	  If you have a bcm63xx CPU, you can enable its onboard
-+	  serial port by enabling this options.
-+
-+          To compile this driver as a module, choose M here: the
-+          module will be called bcm963xx_uart.
-+
-+config SERIAL_BCM63XX_CONSOLE
-+	bool "Console on bcm63xx serial port"
-+	depends on SERIAL_BCM63XX
-+	select SERIAL_CORE_CONSOLE
-+	help
-+	  If you have enabled the serial port on the bcm63xx CPU
-+	  you can make it the console by answering Y to this option.
-+
- endmenu
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_SERIAL_CLPS711X) += clps711
- obj-$(CONFIG_SERIAL_PXA) += pxa.o
- obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
- obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
-+obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
- obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
- obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
- obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -158,6 +158,8 @@
- /* SH-SCI */
- #define PORT_SCIFA	83
- 
-+#define PORT_BCM63XX		83
-+
- #ifdef __KERNEL__
- 
- #include <linux/compiler.h>

target/linux/brcm63xx/patches-2.6.28/004_add_pci_support.patch

@@ -1,33 +0,0 @@
-From 2a7fa2dbbf68650644f807a50cc2d84ca30835c1 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <[email protected]>
-Date: Sun, 21 Sep 2008 04:47:13 +0200
-Subject: [PATCH] [MIPS] BCM63XX: Add PCI support.
-
-Signed-off-by: Maxime Bizon <[email protected]>
----
- arch/mips/bcm63xx/Kconfig                       |    2 +
- arch/mips/bcm63xx/setup.c                       |    2 +
- arch/mips/pci/Makefile                          |    2 +
- arch/mips/pci/fixup-bcm63xx.c                   |   21 +++
- arch/mips/pci/ops-bcm63xx.c                     |  179 +++++++++++++++++++++++
- arch/mips/pci/pci-bcm63xx.c                     |  178 ++++++++++++++++++++++
- arch/mips/pci/pci-bcm63xx.h                     |   27 ++++
- include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h |    6 +
- 8 files changed, 417 insertions(+), 0 deletions(-)
- create mode 100644 arch/mips/pci/fixup-bcm63xx.c
- create mode 100644 arch/mips/pci/ops-bcm63xx.c
- create mode 100644 arch/mips/pci/pci-bcm63xx.c
- create mode 100644 arch/mips/pci/pci-bcm63xx.h
- create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h
-
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -16,6 +16,8 @@ obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o
- obj-$(CONFIG_NEC_MARKEINS)	+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
- obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
- obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
-+obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
-+					ops-bcm63xx.o
- 
- #
- # These are still pretty much in the old state, watch, go blind.

target/linux/brcm63xx/patches-2.6.28/006-pcmcia_cardbus_support.patch

@@ -1,43 +0,0 @@
-From b17597be763621ba63534fda6e1ea0a802be2087 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <[email protected]>
-Date: Fri, 18 Jul 2008 21:18:51 +0200
-Subject: [PATCH] [MIPS] BCM63XX: Add PCMCIA & Cardbus support.
-
-Signed-off-by: Maxime Bizon <[email protected]>
----
- arch/mips/bcm63xx/Makefile                         |    1 +
- arch/mips/bcm63xx/dev-pcmcia.c                     |  135 +++++
- drivers/pcmcia/Kconfig                             |    4 +
- drivers/pcmcia/Makefile                            |    1 +
- drivers/pcmcia/bcm63xx_pcmcia.c                    |  521 ++++++++++++++++++++
- drivers/pcmcia/bcm63xx_pcmcia.h                    |   65 +++
- include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h |   13 +
- 7 files changed, 740 insertions(+), 0 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-pcmcia.c
- create mode 100644 drivers/pcmcia/bcm63xx_pcmcia.c
- create mode 100644 drivers/pcmcia/bcm63xx_pcmcia.h
- create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h
-
---- a/drivers/pcmcia/Kconfig
-+++ b/drivers/pcmcia/Kconfig
-@@ -192,6 +192,10 @@ config PCMCIA_AU1X00
- 	tristate "Au1x00 pcmcia support"
- 	depends on SOC_AU1X00 && PCMCIA
- 
-+config PCMCIA_BCM63XX
-+	tristate "bcm63xx pcmcia support"
-+	depends on BCM63XX && PCMCIA
-+
- config PCMCIA_SA1100
- 	tristate "SA1100 support"
- 	depends on ARM && ARCH_SA1100 && PCMCIA
---- a/drivers/pcmcia/Makefile
-+++ b/drivers/pcmcia/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_PCMCIA_SA1111)			+= sa11xx_
- obj-$(CONFIG_M32R_PCC)				+= m32r_pcc.o
- obj-$(CONFIG_M32R_CFC)				+= m32r_cfc.o
- obj-$(CONFIG_PCMCIA_AU1X00)			+= au1x00_ss.o
-+obj-$(CONFIG_PCMCIA_BCM63XX)			+= bcm63xx_pcmcia.o
- obj-$(CONFIG_PCMCIA_VRC4171)			+= vrc4171_card.o
- obj-$(CONFIG_PCMCIA_VRC4173)			+= vrc4173_cardu.o
- obj-$(CONFIG_OMAP_CF)				+= omap_cf.o

target/linux/brcm63xx/patches-2.6.28/007-usb_ohci_support.patch

@@ -1,56 +0,0 @@
-From f7416412febd7efc1d33c7506c81265719368667 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <[email protected]>
-Date: Mon, 21 Jul 2008 14:58:19 +0200
-Subject: [PATCH] [MIPS] BCM63XX: Add USB OHCI support.
-
-Signed-off-by: Maxime Bizon <[email protected]>
----
- arch/mips/bcm63xx/Kconfig                          |    6 +
- arch/mips/bcm63xx/Makefile                         |    1 +
- arch/mips/bcm63xx/dev-usb-ohci.c                   |   50 ++++++
- drivers/usb/host/ohci-bcm63xx.c                    |  159 ++++++++++++++++++++
- drivers/usb/host/ohci-hcd.c                        |    5 +
- drivers/usb/host/ohci.h                            |    7 +-
- .../asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h   |    6 +
- 7 files changed, 233 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
- create mode 100644 drivers/usb/host/ohci-bcm63xx.c
- create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1047,6 +1047,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER		usb_hcd_pnx4008_driver
- #endif
- 
-+#ifdef CONFIG_BCM63XX
-+#include "ohci-bcm63xx.c"
-+#define PLATFORM_DRIVER		ohci_hcd_bcm63xx_driver
-+#endif
-+
- #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-     defined(CONFIG_CPU_SUBTYPE_SH7763)
---- a/drivers/usb/host/ohci.h
-+++ b/drivers/usb/host/ohci.h
-@@ -536,6 +536,11 @@ static inline struct usb_hcd *ohci_to_hc
- #define big_endian_mmio(ohci)	0		/* only little endian */
- #endif
- 
-+#if defined(CONFIG_MIPS) && defined(CONFIG_BCM63XX)
-+#define readl_be(addr)                __raw_readl((__force unsigned *)addr)
-+#define writel_be(val, addr)  __raw_writel(val, (__force unsigned *)addr)
-+#endif
-+
- /*
-  * Big-endian read/write functions are arch-specific.
-  * Other arches can be added if/when they're needed.
-@@ -646,7 +651,7 @@ static inline u32 hc32_to_cpup (const st
-  * some big-endian SOC implementations.  Same thing happens with PSW access.
-  */
- 
--#ifdef CONFIG_PPC_MPC52xx
-+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX)
- #define big_endian_frame_no_quirk(ohci)	(ohci->flags & OHCI_QUIRK_FRAME_NO)
- #else
- #define big_endian_frame_no_quirk(ohci)	0

target/linux/brcm63xx/patches-2.6.28/008-usb_ehci_support.patch

@@ -1,58 +0,0 @@
-From 2940d1996c86c4c4dd7a82214f846d0c0b707165 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <[email protected]>
-Date: Mon, 21 Jul 2008 18:24:42 +0200
-Subject: [PATCH] [MIPS] BCM63XX: Add USB EHCI support.
-
-Signed-off-by: Maxime Bizon <[email protected]>
----
- arch/mips/bcm63xx/Kconfig                          |    2 +
- arch/mips/bcm63xx/Makefile                         |    1 +
- arch/mips/bcm63xx/dev-usb-ehci.c                   |   50 +++++++
- drivers/usb/host/ehci-bcm63xx.c                    |  152 ++++++++++++++++++++
- drivers/usb/host/ehci-hcd.c                        |    5 +
- drivers/usb/host/ehci.h                            |    5 +
- .../asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h   |    6 +
- 7 files changed, 221 insertions(+), 0 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
- create mode 100644 drivers/usb/host/ehci-bcm63xx.c
- create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1036,6 +1036,11 @@ MODULE_LICENSE ("GPL");
- #define	PLATFORM_DRIVER		ixp4xx_ehci_driver
- #endif
- 
-+#ifdef CONFIG_BCM63XX
-+#include "ehci-bcm63xx.c"
-+#define	PLATFORM_DRIVER		ehci_hcd_bcm63xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
- #error "missing bus glue for ehci-hcd"
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -621,6 +621,11 @@ ehci_port_speed(struct ehci_hcd *ehci, u
- #define writel_be(val, addr)	__raw_writel(val, (__force unsigned *)addr)
- #endif
- 
-+#if defined(CONFIG_MIPS) && defined(CONFIG_BCM63XX)
-+#define readl_be(addr)		__raw_readl((__force unsigned *)addr)
-+#define writel_be(val, addr)	__raw_writel(val, (__force unsigned *)addr)
-+#endif
-+
- static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
- 		__u32 __iomem * regs)
- {
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -44,7 +44,7 @@ config USB_EHCI_HCD
- 
- config USB_EHCI_ROOT_HUB_TT
- 	bool "Root Hub Transaction Translators"
--	depends on USB_EHCI_HCD
-+	depends on USB_EHCI_HCD && !BCM63XX
- 	---help---
- 	  Some EHCI chips have vendor-specific extensions to integrate
- 	  transaction translators, so that no OHCI or UHCI companion

target/linux/brcm63xx/patches-2.6.28/009-add_integrated_ethernet_mac_support.patch

@@ -1,48 +0,0 @@
-From 49aa7ffcd9bd2d9a0af99fced7b8511160dbf345 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <[email protected]>
-Date: Sun, 21 Sep 2008 03:43:26 +0200
-Subject: [PATCH] [MIPS] BCM63XX: Add integrated ethernet mac support.
-
-Signed-off-by: Maxime Bizon <[email protected]>
----
- arch/mips/bcm63xx/Makefile                       |    1 +
- arch/mips/bcm63xx/dev-enet.c                     |  158 ++
- drivers/net/Kconfig                              |    9 +
- drivers/net/Makefile                             |    1 +
- drivers/net/bcm63xx_enet.c                       | 1894 ++++++++++++++++++++++
- drivers/net/bcm63xx_enet.h                       |  294 ++++
- include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h |   45 +
- 7 files changed, 2402 insertions(+), 0 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-enet.c
- create mode 100644 drivers/net/bcm63xx_enet.c
- create mode 100644 drivers/net/bcm63xx_enet.h
- create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h
-
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -1987,6 +1987,15 @@ config ATL2
- 	  To compile this driver as a module, choose M here.  The module
- 	  will be called atl2.
- 
-+config BCM63XX_ENET
-+	tristate "Broadcom 63xx internal mac support"
-+	depends on BCM63XX
-+	select MII
-+	select PHYLIB
-+	help
-+	  This driver supports the ethernet MACs in the Broadcom 63xx
-+	  MIPS chipset family (BCM63XX).
-+
- source "drivers/net/fs_enet/Kconfig"
- 
- endif # NET_ETHERNET
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -126,6 +126,7 @@ obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
- obj-$(CONFIG_B44) += b44.o
- obj-$(CONFIG_FORCEDETH) += forcedeth.o
- obj-$(CONFIG_NE_H8300) += ne-h8300.o
-+obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
- obj-$(CONFIG_AX88796) += ax88796.o
- 
- obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o

target/linux/brcm63xx/patches-2.6.28/010-add_integrated_ethernet_phy_support.patch

@@ -1,38 +0,0 @@
-From 7eefcb968019804e024c8243e28afb1eebd674a2 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <[email protected]>
-Date: Sun, 21 Sep 2008 02:20:53 +0200
-Subject: [PATCH] [MIPS] BCM63XX: Add integrated ethernet PHY support for phylib.
-
-Signed-off-by: Maxime Bizon <[email protected]>
----
- drivers/net/phy/Kconfig   |    6 ++
- drivers/net/phy/Makefile  |    1 +
- drivers/net/phy/bcm63xx.c |  132 +++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 139 insertions(+), 0 deletions(-)
- create mode 100644 drivers/net/phy/bcm63xx.c
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -62,6 +62,12 @@ config BROADCOM_PHY
- 	  Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
- 	  and BCM5482 PHYs.
- 
-+config BCM63XX_PHY
-+	tristate "Drivers for Broadcom 63xx SOCs internal PHY"
-+	depends on BCM63XX
-+	---help---
-+	  Currently supports the 6348 and 6358 PHYs.
-+
- config ICPLUS_PHY
- 	tristate "Drivers for ICPlus PHYs"
- 	---help---
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
- obj-$(CONFIG_SMSC_PHY)		+= smsc.o
- obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
- obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
-+obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
- obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
- obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
- obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o

target/linux/brcm63xx/patches-2.6.28/020-watchdog.patch

@@ -1,29 +0,0 @@
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
- 
- # PARISC Architecture
- 
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -747,6 +747,16 @@ config TXX9_WDT
- 	help
- 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
- 
-+config BCM63XX_WDT
-+	tristate "Broadcom BCM63xx hardware watchdog"
-+	depends on BCM63XX
-+	help
-+	  Watchdog driver for the built in watchdog hardware in Broadcom
-+	  BCM63xx SoC.
-+
-+	  To compile thi driver as a loadable module, choose M here.
-+	  The module will be called bcm63xx_wdt.
-+
- # PARISC Architecture
- 
- # POWERPC Architecture

target/linux/brcm63xx/patches-2.6.28/040-bcm963xx_flashmap.patch

@@ -1,73 +0,0 @@
-From e734ace5baa04e0e8af1d4483475fbd6bd2b32a1 Mon Sep 17 00:00:00 2001
-From: Axel Gembe <[email protected]>
-Date: Mon, 12 May 2008 18:54:09 +0200
-Subject: [PATCH] bcm963xx: flashmap support
-
-
-Signed-off-by: Axel Gembe <[email protected]>
----
- drivers/mtd/maps/Kconfig  |    7 +++++++
- drivers/mtd/maps/Makefile |    1 +
- drivers/mtd/redboot.c     |   13 ++++++++++---
- 3 files changed, 18 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -257,6 +257,13 @@ config MTD_ALCHEMY
- 	help
- 	  Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
- 
-+config MTD_BCM963XX
-+        tristate "BCM963xx Flash device"
-+        depends on MIPS && BCM63XX
-+        help
-+	  Flash memory access on BCM963xx boards. Currently only works with
-+	  RedBoot and CFE.
-+
- config MTD_DILNETPC
- 	tristate "CFI Flash device mapped on DIL/Net PC"
- 	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -39,7 +39,7 @@ static inline int redboot_checksum(struc
- 	return 1;
- }
- 
--static int parse_redboot_partitions(struct mtd_info *master,
-+int parse_redboot_partitions(struct mtd_info *master,
-                              struct mtd_partition **pparts,
-                              unsigned long fis_origin)
- {
-@@ -162,6 +162,14 @@ static int parse_redboot_partitions(stru
- 		goto out;
- 	}
- 
-+	if (!fis_origin) {
-+		for (i = 0; i < numslots; i++) {
-+			if (!strncmp(buf[i].name, "RedBoot", 8)) {
-+				fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
-+			}
-+		}
-+	}
-+
- 	for (i = 0; i < numslots; i++) {
- 		struct fis_list *new_fl, **prev;
- 
-@@ -184,9 +192,8 @@ static int parse_redboot_partitions(stru
- 		new_fl->img = &buf[i];
-                 if (fis_origin) {
-                         buf[i].flash_base -= fis_origin;
--                } else {
--                        buf[i].flash_base &= master->size-1;
-                 }
-+		buf[i].flash_base &= (master->size << 1) - 1;
- 
- 		/* I'm sure the JFFS2 code has done me permanent damage.
- 		 * I now think the following is _normal_
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -61,3 +61,4 @@ obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
- obj-$(CONFIG_MTD_OMAP_NOR)	+= omap_nor.o
- obj-$(CONFIG_MTD_INTEL_VR_NOR)	+= intel_vr_nor.o
- obj-$(CONFIG_MTD_BFIN_ASYNC)	+= bfin-async-flash.o
-+obj-$(CONFIG_MTD_BCM963XX)	+= bcm963xx-flash.o

target/linux/brcm63xx/patches-2.6.28/050-spi.patch

@@ -1,26 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -229,6 +229,13 @@ config SPI_XILINX
- 	  See the "OPB Serial Peripheral Interface (SPI) (v1.00e)"
- 	  Product Specification document (DS464) for hardware details.
- 
-+config SPI_BCM63XX
-+	tristate "Broadcom BCM63xx SPI controller"
-+	depends on BCM63XX
-+	select SPI_BITBANG
-+	help
-+	  SPI driver for the Broadcom BCM63xx SPI controller.
-+
- #
- # Add new SPI master controllers in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24x
- obj-$(CONFIG_SPI_TXX9)			+= spi_txx9.o
- obj-$(CONFIG_SPI_XILINX)		+= xilinx_spi.o
- obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.o
-+obj-$(CONFIG_SPI_BCM63XX)		+= bcm63xx_spi.o
- # 	... add above this line ...
- 
- # SPI protocol drivers (device/link on bus)

target/linux/brcm63xx/patches-2.6.28/500-lzma_initramfs.patch

@@ -1,125 +0,0 @@
---- a/init/initramfs.c
-+++ b/init/initramfs.c
-@@ -7,6 +7,7 @@
- #include <linux/string.h>
- #include <linux/syscalls.h>
- #include <linux/utime.h>
-+#include <linux/vmalloc.h>
- 
- static __initdata char *message;
- static void __init error(char *x)
-@@ -475,6 +476,69 @@ static void __init flush_window(void)
- 	outcnt = 0;
- }
- 
-+#include <linux/LzmaDecode.h>
-+static int __init lzma_unzip(void)
-+{
-+	unsigned int i;  /* temp value */
-+	unsigned int lc; /* literal context bits */
-+	unsigned int lp; /* literal pos state bits */
-+	unsigned int pb; /* pos state bits */
-+	unsigned int osize; /* uncompressed size */
-+	unsigned char *workspace;
-+	unsigned char* outputbuffer;
-+	unsigned int outsizeProcessed = 0;
-+	int workspace_size;
-+	int res;
-+
-+	// lzma args
-+	i = get_byte();
-+	lc = i % 9, i = i / 9;
-+	lp = i % 5, pb = i / 5;
-+
-+	// skip dictionary size
-+	for (i = 0; i < 4; i++)
-+		get_byte();
-+
-+	/* read the lower half of uncompressed size in the header */
-+	osize = ((unsigned int)get_byte()) +
-+		((unsigned int)get_byte() << 8) +
-+		((unsigned int)get_byte() << 16) +
-+		((unsigned int)get_byte() << 24);
-+
-+	/* skip rest of the header (upper half of uncompressed size) */
-+	for (i = 0; i < 4; i++)
-+		get_byte();
-+
-+	workspace_size = ((LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp))) * sizeof(CProb)) + 100;
-+	printk( KERN_NOTICE "initramfs: LZMA lc=%d,lp=%d,pb=%d,origSize=%d\n",
-+	lc,lp,pb,osize);
-+	outputbuffer = vmalloc(osize);
-+	if (outputbuffer == 0) {
-+		printk(KERN_ERR "initramfs: Couldn't allocate lzma output buffer\n");
-+		return -1;
-+	}
-+
-+	workspace = vmalloc(workspace_size);
-+	if (workspace == NULL) {
-+		printk(KERN_ERR "initramfs: Couldn't allocate lzma workspace\n");
-+		return -1;
-+	}
-+
-+	res = LzmaDecode(workspace, workspace_size, lc, lp, pb, inbuf + inptr, insize - inptr, outputbuffer, osize, &outsizeProcessed);
-+	if( res != 0 ) {
-+		panic( KERN_ERR "initramfs: Lzma decode failure\n");
-+		return -1;
-+	}
-+
-+	flush_buffer(outputbuffer, outsizeProcessed);
-+	inptr = insize;
-+
-+	vfree(outputbuffer);
-+	vfree(workspace);
-+	state = Reset;
-+	return 0;
-+}
-+
- static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only)
- {
- 	int written;
-@@ -509,12 +573,28 @@ static char * __init unpack_to_rootfs(ch
- 		inptr = 0;
- 		outcnt = 0;		/* bytes in output buffer */
- 		bytes_out = 0;
--		crc = (ulg)0xffffffffL; /* shift register contents */
--		makecrc();
--		gunzip();
--		if (state != Reset)
-+		if( inbuf[0] == 037 && ((inbuf[1] == 0213) || (inbuf[1] == 0236)))
-+		{
-+		   printk( KERN_NOTICE "detected gzip initramfs\n");
-+		   crc = (ulg)0xffffffffL; /* shift register contents */
-+		   makecrc();
-+		   gunzip();
-+		   if (state != Reset)
- 			error("junk in gzipped archive");
--		this_header = saved_offset + inptr;
-+		}
-+		else if(!memcmp(inbuf+1, "\x00\x00\x80\x00", 4)) /* FIXME: hardcoded dictionary size */
-+		{
-+		   printk( KERN_NOTICE "detected lzma initramfs\n");
-+		   lzma_unzip();
-+		}
-+		else
-+		{
-+		   // skip forward ?
-+		   crc = (ulg)0xffffffffL; /* shift register contents */
-+		   makecrc();
-+		   gunzip();
-+		}
-+	        this_header = saved_offset + inptr;
- 		buf += inptr;
- 		len -= inptr;
- 	}
---- a/scripts/gen_initramfs_list.sh
-+++ b/scripts/gen_initramfs_list.sh
-@@ -287,7 +287,7 @@ if [ ! -z ${output_file} ]; then
- 	if [ "${is_cpio_compressed}" = "compressed" ]; then
- 		cat ${cpio_tfile} > ${output_file}
- 	else
--		cat ${cpio_tfile} | gzip -f -9 - > ${output_file}
-+		lzma e -lc1 -lp2 -pb2 ${cpio_tfile} ${output_file}
- 	fi
- 	[ -z ${cpio_file} ] && rm ${cpio_tfile}
- fi