ramips: move and rename out-of-tree mtk eth driver

move the driver into shared 'files' directory and rename all symbols
from mediatek/mtk to ralink.

Signed-off-by: Chuanhong Guo <[email protected]>

target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/Kconfig

@@ -1,70 +0,0 @@
-config NET_VENDOR_MEDIATEK
-	tristate "Mediatek/Ralink ethernet driver"
-	depends on RALINK
-	help
-	  This driver supports the ethernet mac inside the Mediatek and Ralink WiSoCs
-
-config NET_MEDIATEK_SOC
-	def_tristate NET_VENDOR_MEDIATEK
-
-if NET_MEDIATEK_SOC
-choice
-	prompt "MAC type"
-
-config NET_MEDIATEK_RT2880
-	bool "RT2882"
-	depends on MIPS && SOC_RT288X
-
-config NET_MEDIATEK_RT3050
-	bool "RT3050/MT7628"
-	depends on MIPS && (SOC_RT305X || SOC_MT7620)
-
-config NET_MEDIATEK_RT3883
-	bool "RT3883"
-	depends on MIPS && SOC_RT3883
-
-config NET_MEDIATEK_MT7620
-	bool "MT7620"
-	depends on MIPS && SOC_MT7620
-
-config NET_MEDIATEK_MT7621
-	bool "MT7621"
-	depends on MIPS && SOC_MT7621
-
-endchoice
-
-config NET_MEDIATEK_OFFLOAD
-	def_bool NET_MEDIATEK_SOC
-	depends on NET_MEDIATEK_MT7621
-
-config NET_MEDIATEK_HW_QOS
-	def_bool NET_MEDIATEK_SOC
-	depends on NET_MEDIATEK_MT7623
-
-config NET_MEDIATEK_MDIO
-	def_bool NET_MEDIATEK_SOC
-	depends on (NET_MEDIATEK_RT2880 || NET_MEDIATEK_RT3883 || NET_MEDIATEK_MT7620 || NET_MEDIATEK_MT7621)
-	select PHYLIB
-
-config NET_MEDIATEK_MDIO_RT2880
-	def_bool NET_MEDIATEK_SOC
-	depends on (NET_MEDIATEK_RT2880 || NET_MEDIATEK_RT3883)
-	select NET_MEDIATEK_MDIO
-
-config NET_MEDIATEK_MDIO_MT7620
-	def_bool NET_MEDIATEK_SOC
-	depends on (NET_MEDIATEK_MT7620 || NET_MEDIATEK_MT7621)
-	select NET_MEDIATEK_MDIO
-
-config NET_MEDIATEK_ESW_RT3050
-	def_tristate NET_MEDIATEK_SOC
-	depends on NET_MEDIATEK_RT3050
-
-config NET_MEDIATEK_GSW_MT7620
-	def_tristate NET_MEDIATEK_SOC
-	depends on NET_MEDIATEK_MT7620
-
-config NET_MEDIATEK_GSW_MT7621
-	def_tristate NET_MEDIATEK_SOC
-	depends on NET_MEDIATEK_MT7621
-endif

target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/Makefile

@@ -1,22 +0,0 @@
-#
-# Makefile for the Ralink SoCs built-in ethernet macs
-#
-
-mtk-eth-soc-y					+= mtk_eth_soc.o ethtool.o
-
-mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MDIO)		+= mdio.o
-mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MDIO_RT2880)	+= mdio_rt2880.o
-mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MDIO_MT7620)	+= mdio_mt7620.o
-
-mtk-eth-soc-$(CONFIG_NET_MEDIATEK_OFFLOAD)	+= mtk_offload.o mtk_debugfs.o
-
-mtk-eth-soc-$(CONFIG_NET_MEDIATEK_RT2880)	+= soc_rt2880.o
-mtk-eth-soc-$(CONFIG_NET_MEDIATEK_RT3050)	+= soc_rt3050.o
-mtk-eth-soc-$(CONFIG_NET_MEDIATEK_RT3883)	+= soc_rt3883.o
-mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7620)	+= soc_mt7620.o
-mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7621)	+= soc_mt7621.o
-
-obj-$(CONFIG_NET_MEDIATEK_ESW_RT3050)		+= esw_rt3050.o
-obj-$(CONFIG_NET_MEDIATEK_GSW_MT7620)		+= gsw_mt7620.o mt7530.o
-obj-$(CONFIG_NET_MEDIATEK_GSW_MT7621)		+= gsw_mt7621.o mt7530.o
-obj-$(CONFIG_NET_MEDIATEK_SOC)			+= mtk-eth-soc.o

target/linux/ramips/files/drivers/net/ethernet/ralink/Kconfig

@@ -0,0 +1,70 @@
+config NET_VENDOR_RALINK
+	tristate "Ralink ethernet driver"
+	depends on RALINK
+	help
+	  This driver supports the ethernet mac inside Ralink WiSoCs
+
+config NET_RALINK_SOC
+	def_tristate NET_VENDOR_RALINK
+
+if NET_RALINK_SOC
+choice
+	prompt "MAC type"
+
+config NET_RALINK_RT2880
+	bool "RT2882"
+	depends on MIPS && SOC_RT288X
+
+config NET_RALINK_RT3050
+	bool "RT3050/MT7628"
+	depends on MIPS && (SOC_RT305X || SOC_MT7620)
+
+config NET_RALINK_RT3883
+	bool "RT3883"
+	depends on MIPS && SOC_RT3883
+
+config NET_RALINK_MT7620
+	bool "MT7620"
+	depends on MIPS && SOC_MT7620
+
+config NET_RALINK_MT7621
+	bool "MT7621"
+	depends on MIPS && SOC_MT7621
+
+endchoice
+
+config NET_RALINK_OFFLOAD
+	def_bool NET_RALINK_SOC
+	depends on NET_RALINK_MT7621
+
+config NET_RALINK_HW_QOS
+	def_bool NET_RALINK_SOC
+	depends on NET_RALINK_MT7623
+
+config NET_RALINK_MDIO
+	def_bool NET_RALINK_SOC
+	depends on (NET_RALINK_RT2880 || NET_RALINK_RT3883 || NET_RALINK_MT7620 || NET_RALINK_MT7621)
+	select PHYLIB
+
+config NET_RALINK_MDIO_RT2880
+	def_bool NET_RALINK_SOC
+	depends on (NET_RALINK_RT2880 || NET_RALINK_RT3883)
+	select NET_RALINK_MDIO
+
+config NET_RALINK_MDIO_MT7620
+	def_bool NET_RALINK_SOC
+	depends on (NET_RALINK_MT7620 || NET_RALINK_MT7621)
+	select NET_RALINK_MDIO
+
+config NET_RALINK_ESW_RT3050
+	def_tristate NET_RALINK_SOC
+	depends on NET_RALINK_RT3050
+
+config NET_RALINK_GSW_MT7620
+	def_tristate NET_RALINK_SOC
+	depends on NET_RALINK_MT7620
+
+config NET_RALINK_GSW_MT7621
+	def_tristate NET_RALINK_SOC
+	depends on NET_RALINK_MT7621
+endif

target/linux/ramips/files/drivers/net/ethernet/ralink/Makefile

@@ -0,0 +1,22 @@
+#
+# Makefile for the Ralink SoCs built-in ethernet macs
+#
+
+ralink-eth-y					+= mtk_eth_soc.o ethtool.o
+
+ralink-eth-$(CONFIG_NET_RALINK_MDIO)		+= mdio.o
+ralink-eth-$(CONFIG_NET_RALINK_MDIO_RT2880)	+= mdio_rt2880.o
+ralink-eth-$(CONFIG_NET_RALINK_MDIO_MT7620)	+= mdio_mt7620.o
+
+ralink-eth-$(CONFIG_NET_RALINK_OFFLOAD)	+= mtk_offload.o mtk_debugfs.o
+
+ralink-eth-$(CONFIG_NET_RALINK_RT2880)	+= soc_rt2880.o
+ralink-eth-$(CONFIG_NET_RALINK_RT3050)	+= soc_rt3050.o
+ralink-eth-$(CONFIG_NET_RALINK_RT3883)	+= soc_rt3883.o
+ralink-eth-$(CONFIG_NET_RALINK_MT7620)	+= soc_mt7620.o
+ralink-eth-$(CONFIG_NET_RALINK_MT7621)	+= soc_mt7621.o
+
+obj-$(CONFIG_NET_RALINK_ESW_RT3050)		+= esw_rt3050.o
+obj-$(CONFIG_NET_RALINK_GSW_MT7620)		+= gsw_mt7620.o mt7530.o
+obj-$(CONFIG_NET_RALINK_GSW_MT7621)		+= gsw_mt7621.o mt7530.o
+obj-$(CONFIG_NET_RALINK_SOC)			+= ralink-eth.o

target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/esw_rt3050.h → target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3050.h

@@ -15,7 +15,7 @@
 #ifndef _RALINK_ESW_RT3052_H__
 #define _RALINK_ESW_RT3052_H__
 
-#ifdef CONFIG_NET_MEDIATEK_ESW_RT3052
+#ifdef CONFIG_NET_RALINK_ESW_RT3052
 
 int __init mtk_switch_init(void);
 void mtk_switch_exit(void);

target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mdio.c → target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c

@@ -110,7 +110,7 @@ static void phy_init(struct fe_priv *priv, struct phy_device *phy)
 	phy->autoneg = AUTONEG_ENABLE;
 	phy->speed = 0;
 	phy->duplex = 0;
-	phy->supported &= IS_ENABLED(CONFIG_NET_MEDIATEK_MDIO_MT7620) ?
+	phy->supported &= IS_ENABLED(CONFIG_NET_RALINK_MDIO_MT7620) ?
 			PHY_GBIT_FEATURES : PHY_BASIC_FEATURES;
 	phy->advertising = phy->supported | ADVERTISED_Autoneg;
 

target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mdio.h → target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.h

@@ -15,7 +15,7 @@
 #ifndef _RALINK_MDIO_H__
 #define _RALINK_MDIO_H__
 
-#ifdef CONFIG_NET_MEDIATEK_MDIO
+#ifdef CONFIG_NET_RALINK_MDIO
 int fe_mdio_init(struct fe_priv *priv);
 void fe_mdio_cleanup(struct fe_priv *priv);
 int fe_connect_phy_node(struct fe_priv *priv,

target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c → target/linux/ramips/files/drivers/net/ethernet/ralink/mtk_eth_soc.c

@@ -941,14 +941,14 @@ static int fe_poll_rx(struct napi_struct *napi, int budget,
 			__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
 					       RX_DMA_VID(trxd.rxd3));
 
-#ifdef CONFIG_NET_MEDIATEK_OFFLOAD
+#ifdef CONFIG_NET_RALINK_OFFLOAD
 		if (mtk_offload_check_rx(priv, skb, trxd.rxd4) == 0) {
 #endif
 			stats->rx_packets++;
 			stats->rx_bytes += pktlen;
 
 			napi_gro_receive(napi, skb);
-#ifdef CONFIG_NET_MEDIATEK_OFFLOAD
+#ifdef CONFIG_NET_RALINK_OFFLOAD
 		} else {
 			dev_kfree_skb(skb);
 		}
@@ -1290,7 +1290,7 @@ static int fe_open(struct net_device *dev)
 	napi_enable(&priv->rx_napi);
 	fe_int_enable(priv->soc->tx_int | priv->soc->rx_int);
 	netif_start_queue(dev);
-#ifdef CONFIG_NET_MEDIATEK_OFFLOAD
+#ifdef CONFIG_NET_RALINK_OFFLOAD
 	mtk_ppe_probe(priv);
 #endif
 
@@ -1329,7 +1329,7 @@ static int fe_stop(struct net_device *dev)
 
 	fe_free_dma(priv);
 
-#ifdef CONFIG_NET_MEDIATEK_OFFLOAD
+#ifdef CONFIG_NET_RALINK_OFFLOAD
 	mtk_ppe_remove(priv);
 #endif
 
@@ -1493,7 +1493,7 @@ static int fe_change_mtu(struct net_device *dev, int new_mtu)
 	return fe_open(dev);
 }
 
-#ifdef CONFIG_NET_MEDIATEK_OFFLOAD
+#ifdef CONFIG_NET_RALINK_OFFLOAD
 static int
 fe_flow_offload(enum flow_offload_type type, struct flow_offload *flow,
 		struct flow_offload_hw_path *src,
@@ -1527,7 +1527,7 @@ static const struct net_device_ops fe_netdev_ops = {
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= fe_poll_controller,
 #endif
-#ifdef CONFIG_NET_MEDIATEK_OFFLOAD
+#ifdef CONFIG_NET_RALINK_OFFLOAD
 	.ndo_flow_offload	= fe_flow_offload,
 #endif
 };

target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mtk_offload.c → target/linux/ramips/files/drivers/net/ethernet/ralink/mtk_offload.c

@@ -60,7 +60,7 @@ mtk_foe_prepare_v4(struct mtk_foe_entry *entry,
 	entry->ipv4_hnapt.iblk2.dscp = 0;
 	entry->ipv4_hnapt.iblk2.port_mg = 0x3f;
 	entry->ipv4_hnapt.iblk2.port_ag = 0x1f;
-#ifdef CONFIG_NET_MEDIATEK_HW_QOS
+#ifdef CONFIG_NET_RALINK_HW_QOS
 	entry->ipv4_hnapt.iblk2.qid = 1;
 	entry->ipv4_hnapt.iblk2.fqos = 1;
 #endif
@@ -202,7 +202,7 @@ int mtk_flow_offload(struct mtk_eth *eth,
 	return 0;
 }
 
-#ifdef CONFIG_NET_MEDIATEK_HW_QOS
+#ifdef CONFIG_NET_RALINK_HW_QOS
 
 #define QDMA_TX_SCH_TX	  0x1a14
 
@@ -393,7 +393,7 @@ static int mtk_ppe_start(struct mtk_eth *eth)
 
 	dev_info(eth->dev, "PPE started\n");
 
-#ifdef CONFIG_NET_MEDIATEK_HW_QOS
+#ifdef CONFIG_NET_RALINK_HW_QOS
 	mtk_ppe_scheduler(eth, 0, 500000);
 	mtk_ppe_scheduler(eth, 1, 500000);
 	mtk_ppe_queue(eth, 0, 0, 7, 32, 250000, 0);

target/linux/ramips/mt7620/config-4.14

@@ -164,13 +164,13 @@ CONFIG_MTD_SPLIT_TPLINK_FW=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_MEDIATEK_GSW_MT7620=y
-CONFIG_NET_MEDIATEK_MDIO=y
-CONFIG_NET_MEDIATEK_MDIO_MT7620=y
-CONFIG_NET_MEDIATEK_MT7620=y
-# CONFIG_NET_MEDIATEK_RT3050 is not set
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_VENDOR_MEDIATEK=y
+CONFIG_NET_RALINK_GSW_MT7620=y
+CONFIG_NET_RALINK_MDIO=y
+CONFIG_NET_RALINK_MDIO_MT7620=y
+CONFIG_NET_RALINK_MT7620=y
+# CONFIG_NET_RALINK_RT3050 is not set
+CONFIG_NET_RALINK_SOC=y
+CONFIG_NET_VENDOR_RALINK=y
 CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
 # CONFIG_NO_IOPORT_MAP is not set
 CONFIG_OF=y

target/linux/ramips/mt7621/config-5.4

@@ -227,6 +227,7 @@ CONFIG_NET_FLOW_LIMIT=y
 CONFIG_NET_MEDIATEK_SOC=y
 CONFIG_NET_SWITCHDEV=y
 CONFIG_NET_VENDOR_MEDIATEK=y
+# CONFIG_NET_VENDOR_RALINK is not set
 CONFIG_NR_CPUS=4
 CONFIG_OF=y
 CONFIG_OF_ADDRESS=y

target/linux/ramips/mt76x8/config-4.14

@@ -158,11 +158,11 @@ CONFIG_MTD_SPLIT_TRX_FW=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_MEDIATEK_ESW_RT3050=y
-# CONFIG_NET_MEDIATEK_MT7620 is not set
-CONFIG_NET_MEDIATEK_RT3050=y
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_VENDOR_MEDIATEK=y
+CONFIG_NET_RALINK_ESW_RT3050=y
+# CONFIG_NET_RALINK_MT7620 is not set
+CONFIG_NET_RALINK_RT3050=y
+CONFIG_NET_RALINK_SOC=y
+CONFIG_NET_VENDOR_RALINK=y
 CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
 # CONFIG_NO_IOPORT_MAP is not set
 CONFIG_OF=y

target/linux/ramips/patches-4.14/200-add-ralink-eth.patch

@@ -0,0 +1,20 @@
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -159,6 +159,7 @@ source "drivers/net/ethernet/packetengin
+ source "drivers/net/ethernet/pasemi/Kconfig"
+ source "drivers/net/ethernet/qlogic/Kconfig"
+ source "drivers/net/ethernet/qualcomm/Kconfig"
++source "drivers/net/ethernet/ralink/Kconfig"
+ source "drivers/net/ethernet/realtek/Kconfig"
+ source "drivers/net/ethernet/renesas/Kconfig"
+ source "drivers/net/ethernet/rdc/Kconfig"
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -70,6 +70,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
+ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
+ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
+ obj-$(CONFIG_NET_VENDOR_QUALCOMM) += qualcomm/
++obj-$(CONFIG_NET_VENDOR_RALINK) += ralink/
+ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
+ obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/
+ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/

target/linux/ramips/patches-5.4/200-add-ralink-eth.patch

@@ -0,0 +1,20 @@
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -159,6 +159,7 @@ source "drivers/net/ethernet/pasemi/Kcon
+ source "drivers/net/ethernet/pensando/Kconfig"
+ source "drivers/net/ethernet/qlogic/Kconfig"
+ source "drivers/net/ethernet/qualcomm/Kconfig"
++source "drivers/net/ethernet/ralink/Kconfig"
+ source "drivers/net/ethernet/rdc/Kconfig"
+ source "drivers/net/ethernet/realtek/Kconfig"
+ source "drivers/net/ethernet/renesas/Kconfig"
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -72,6 +72,7 @@ obj-$(CONFIG_NET_VENDOR_PACKET_ENGINES)
+ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
+ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
+ obj-$(CONFIG_NET_VENDOR_QUALCOMM) += qualcomm/
++obj-$(CONFIG_NET_VENDOR_RALINK) += ralink/
+ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
+ obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/
+ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/

target/linux/ramips/rt288x/config-4.14

@@ -149,11 +149,11 @@ CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_MTD_SPLIT_WRGG_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_MEDIATEK_MDIO=y
-CONFIG_NET_MEDIATEK_MDIO_RT2880=y
-CONFIG_NET_MEDIATEK_RT2880=y
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_VENDOR_MEDIATEK=y
+CONFIG_NET_RALINK_MDIO=y
+CONFIG_NET_RALINK_MDIO_RT2880=y
+CONFIG_NET_RALINK_RT2880=y
+CONFIG_NET_RALINK_SOC=y
+CONFIG_NET_VENDOR_RALINK=y
 CONFIG_NLS=m
 CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
 # CONFIG_NO_IOPORT_MAP is not set

target/linux/ramips/rt305x/config-4.14

@@ -140,10 +140,10 @@ CONFIG_MTD_SPLIT_SEAMA_FW=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_MEDIATEK_ESW_RT3050=y
-CONFIG_NET_MEDIATEK_RT3050=y
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_VENDOR_MEDIATEK=y
+CONFIG_NET_RALINK_ESW_RT3050=y
+CONFIG_NET_RALINK_RT3050=y
+CONFIG_NET_RALINK_SOC=y
+CONFIG_NET_VENDOR_RALINK=y
 CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
 # CONFIG_NO_IOPORT_MAP is not set
 CONFIG_OF=y

target/linux/ramips/rt3883/config-4.14

@@ -153,11 +153,11 @@ CONFIG_MTD_SPLIT_SEAMA_FW=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_MEDIATEK_MDIO=y
-CONFIG_NET_MEDIATEK_MDIO_RT2880=y
-CONFIG_NET_MEDIATEK_RT3883=y
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_VENDOR_MEDIATEK=y
+CONFIG_NET_RALINK_MDIO=y
+CONFIG_NET_RALINK_MDIO_RT2880=y
+CONFIG_NET_RALINK_RT3883=y
+CONFIG_NET_RALINK_SOC=y
+CONFIG_NET_VENDOR_RALINK=y
 CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
 # CONFIG_NO_IOPORT_MAP is not set
 CONFIG_OF=y