|
|
@@ -0,0 +1,219 @@
|
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
+
|
|
|
+/dts-v1/;
|
|
|
+
|
|
|
+#include "ipq8074.dtsi"
|
|
|
+#include "ipq8074-hk-cpu.dtsi"
|
|
|
+#include "ipq8074-ess.dtsi"
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
|
+#include <dt-bindings/input/input.h>
|
|
|
+#include <dt-bindings/leds/common.h>
|
|
|
+
|
|
|
+/ {
|
|
|
+ model = "Spectrum SAX1V1K";
|
|
|
+ compatible = "spectrum,sax1v1k", "qcom,ipq8074";
|
|
|
+
|
|
|
+ aliases {
|
|
|
+ led-boot = &led_system_red;
|
|
|
+ led-failsafe = &led_system_red;
|
|
|
+ led-running = &led_system_blue;
|
|
|
+ led-upgrade = &led_system_red;
|
|
|
+ serial0 = &blsp1_uart5;
|
|
|
+ /* Aliases as required by u-boot to patch MAC addresses */
|
|
|
+ ethernet0 = &dp6_syn;
|
|
|
+ ethernet1 = &dp4;
|
|
|
+ ethernet2 = &dp3;
|
|
|
+ ethernet3 = &dp2;
|
|
|
+ label-mac-device = &dp6_syn;
|
|
|
+ };
|
|
|
+
|
|
|
+ chosen {
|
|
|
+ stdout-path = "serial0:115200n8";
|
|
|
+ };
|
|
|
+
|
|
|
+ keys {
|
|
|
+ compatible = "gpio-keys";
|
|
|
+
|
|
|
+ reset {
|
|
|
+ label = "reset";
|
|
|
+ gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,code = <KEY_RESTART>;
|
|
|
+ };
|
|
|
+
|
|
|
+ wps {
|
|
|
+ label = "wps";
|
|
|
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,code = <KEY_WPS_BUTTON>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ leds {
|
|
|
+ compatible = "gpio-leds";
|
|
|
+
|
|
|
+ led_system_blue: system-blue {
|
|
|
+ gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
|
|
|
+ color = <LED_COLOR_ID_BLUE>;
|
|
|
+ function = LED_FUNCTION_STATUS;
|
|
|
+ };
|
|
|
+
|
|
|
+ led_system_red: system-red {
|
|
|
+ gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
|
|
|
+ color = <LED_COLOR_ID_RED>;
|
|
|
+ function = LED_FUNCTION_STATUS;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&tlmm {
|
|
|
+ mdio_pins: mdio-pins {
|
|
|
+ mdc {
|
|
|
+ pins = "gpio68";
|
|
|
+ function = "mdc";
|
|
|
+ drive-strength = <8>;
|
|
|
+ bias-pull-up;
|
|
|
+ };
|
|
|
+
|
|
|
+ mdio {
|
|
|
+ pins = "gpio69";
|
|
|
+ function = "mdio";
|
|
|
+ drive-strength = <8>;
|
|
|
+ bias-pull-up;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&blsp1_uart5 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&prng {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&cryptobam {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&crypto {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&qpic_bam {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&mdio {
|
|
|
+ pinctrl-0 = <&mdio_pins>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ ethernet-phy-package@0 {
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <0>;
|
|
|
+ compatible = "qcom,qca8075-package";
|
|
|
+ reg = <0>;
|
|
|
+
|
|
|
+ qcom,package-mode = "qsgmii";
|
|
|
+
|
|
|
+ qca8075_1: ethernet-phy@1 {
|
|
|
+ compatible = "ethernet-phy-ieee802.3-c22";
|
|
|
+ reg = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ qca8075_2: ethernet-phy@2 {
|
|
|
+ compatible = "ethernet-phy-ieee802.3-c22";
|
|
|
+ reg = <2>;
|
|
|
+ };
|
|
|
+
|
|
|
+ qca8075_3: ethernet-phy@3 {
|
|
|
+ compatible = "ethernet-phy-ieee802.3-c22";
|
|
|
+ reg = <3>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ qca8081: ethernet-phy@28 {
|
|
|
+ compatible = "ethernet-phy-id004d.d101";
|
|
|
+ reg = <28>;
|
|
|
+ reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&sdhc_1 {
|
|
|
+ /* Following same rule as QNAP 301W
|
|
|
+ * the emmc has a problem with the hs400 > hs200 speed switch.
|
|
|
+ * Therefore remove the mmc-hs400-1_8v property
|
|
|
+ */
|
|
|
+ /delete-property/ mmc-hs400-1_8v;
|
|
|
+ mmc-hs200-1_8v;
|
|
|
+ mmc-ddr-1_8v;
|
|
|
+ vqmmc-supply = <&l11>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&switch {
|
|
|
+ switch_lan_bmp = <(ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>; /* lan port bitmap */
|
|
|
+ switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
|
|
|
+ switch_mac_mode = <MAC_MODE_QSGMII>; /* mac mode for uniphy instance0*/
|
|
|
+ switch_mac_mode2 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance2*/
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ qcom,port_phyinfo {
|
|
|
+ port@2 {
|
|
|
+ port_id = <2>;
|
|
|
+ phy_address = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ port@3 {
|
|
|
+ port_id = <3>;
|
|
|
+ phy_address = <2>;
|
|
|
+ };
|
|
|
+
|
|
|
+ port@4 {
|
|
|
+ port_id = <4>;
|
|
|
+ phy_address = <3>;
|
|
|
+ };
|
|
|
+
|
|
|
+ port@6 {
|
|
|
+ port_id = <6>;
|
|
|
+ phy_address = <28>;
|
|
|
+ port_mac_sel = "QGMAC_PORT";
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&edma {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&dp2 {
|
|
|
+ phy-mode = "qsgmii";
|
|
|
+ phy-handle = <&qca8075_1>;
|
|
|
+ label = "lan3";
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&dp3 {
|
|
|
+ phy-mode = "qsgmii";
|
|
|
+ phy-handle = <&qca8075_2>;
|
|
|
+ label = "lan2";
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&dp4 {
|
|
|
+ phy-mode = "qsgmii";
|
|
|
+ phy-handle = <&qca8075_3>;
|
|
|
+ label = "lan1";
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&dp6_syn {
|
|
|
+ phy-handle = <&qca8081>;
|
|
|
+ label = "wan";
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&wifi {
|
|
|
+ qcom,ath11k-calibration-variant = "Spectrum-SAX1V1K";
|
|
|
+ status = "okay";
|
|
|
+};
|
Connor Yoon