kernel: update linux 3.8 to 3.8.9

Signed-off-by: Gabor Juhos <[email protected]>

SVN-Revision: 36453

include/kernel-version.mk

@@ -11,8 +11,8 @@ endif
 ifeq ($(LINUX_VERSION),3.7.10)
   LINUX_KERNEL_MD5SUM:=09624c3702107076efcac5e1cd8a18ec
 endif
-ifeq ($(LINUX_VERSION),3.8.8)
-  LINUX_KERNEL_MD5SUM:=3b4feff68460881a5dde1307fe1ce87f
+ifeq ($(LINUX_VERSION),3.8.9)
+  LINUX_KERNEL_MD5SUM:=b5286ad3d8a729e9ae48b26211e05aec
 endif
 
 # disable the md5sum check for unknown kernel versions

target/linux/adm5120/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 BOARD:=adm5120
 BOARDNAME:=Infineon/ADMtek ADM5120
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 SUBTARGETS:=router_le router_be rb1xx
 INITRAMFS_EXTRA_FILES:=
 

target/linux/ar71xx/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs jffs2 targz
 CFLAGS:=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -mno-branch-likely
 SUBTARGETS:=generic nand
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ar71xx/patches-3.8/902-unaligned_access_hacks.patch

@@ -279,7 +279,7 @@
  #include <asm/uaccess.h>
  
  #include <linux/proc_fs.h>
-@@ -763,10 +764,10 @@ static void tcp_v6_send_response(struct 
+@@ -763,10 +764,10 @@ static void tcp_v6_send_response(struct
  	topt = (__be32 *)(t1 + 1);
  
  	if (ts) {
@@ -415,7 +415,7 @@
  	if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
  		fl6.flowi6_mark = skb->mark;
  
-@@ -1240,7 +1240,7 @@ static int ip6gre_header(struct sk_buff 
+@@ -1240,7 +1240,7 @@ static int ip6gre_header(struct sk_buff
  	struct ipv6hdr *ipv6h = (struct ipv6hdr *)skb_push(skb, t->hlen);
  	__be16 *p = (__be16 *)(ipv6h+1);
  
@@ -831,7 +831,7 @@
  #include <linux/netdevice.h>
 --- a/include/net/inet_ecn.h
 +++ b/include/net/inet_ecn.h
-@@ -115,13 +115,13 @@ static inline int IP6_ECN_set_ce(struct 
+@@ -115,13 +115,13 @@ static inline int IP6_ECN_set_ce(struct
  {
  	if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
  		return 0;
@@ -1005,7 +1005,7 @@
  	ptr = ip6hoff + sizeof(struct ipv6hdr);
 --- a/net/xfrm/xfrm_input.c
 +++ b/net/xfrm/xfrm_input.c
-@@ -77,8 +77,8 @@ int xfrm_parse_spi(struct sk_buff *skb, 
+@@ -77,8 +77,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
  	if (!pskb_may_pull(skb, hlen))
  		return -EINVAL;
  

target/linux/at91/Makefile

@@ -13,7 +13,7 @@ BOARDNAME:=Atmel AT91
 FEATURES:=squashfs jffs2 targz ext2 usb
 CFLAGS:=-Os -pipe -march=armv5te -mtune=arm926ej-s -fno-caller-saves
 
-LINUX_VERSION:=3.8.7
+LINUX_VERSION:=3.8.9
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/at91/patches/700-tqma9263-support.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-at91/Kconfig
 +++ b/arch/arm/mach-at91/Kconfig
-@@ -335,6 +335,12 @@ config MACH_NEOCORE926
+@@ -358,6 +358,12 @@ config MACH_NEOCORE926
  	help
  	  Select this if you are using the Adeneo Neocore 926 board.
  
@@ -15,7 +15,7 @@
  # ----------------------------------------------------------
 --- a/arch/arm/mach-at91/Makefile
 +++ b/arch/arm/mach-at91/Makefile
-@@ -58,6 +58,7 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += boar
+@@ -67,6 +67,7 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += boar
  obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
  obj-$(CONFIG_MACH_USB_A9263)	+= board-usb-a926x.o
  obj-$(CONFIG_MACH_NEOCORE926)	+= board-neocore926.o

target/linux/at91/patches/805-free_some_portc_pins.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-at91/at91sam9260_devices.c
 +++ b/arch/arm/mach-at91/at91sam9260_devices.c
-@@ -579,7 +579,7 @@ static struct platform_device at91sam926
+@@ -507,7 +507,7 @@ static struct platform_device at91sam926
  	.num_resources	= ARRAY_SIZE(spi1_resources),
  };
  

target/linux/at91/patches/901-AT91-flexibity-default-leds-to-heartbeat.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-at91/board-flexibity.c
 +++ b/arch/arm/mach-at91/board-flexibity.c
-@@ -94,49 +94,49 @@ static struct gpio_led flexibity_leds[]
+@@ -89,49 +89,49 @@ static struct gpio_led flexibity_leds[]
  		.name			= "usb1:green",
  		.gpio			= AT91_PIN_PA12,
  		.active_low		= 1,

target/linux/atheros/Makefile

@@ -11,7 +11,7 @@ BOARD:=atheros
 BOARDNAME:=Atheros AR231x/AR5312
 FEATURES:=squashfs jffs2
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/avr32/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Atmel AVR32
 FEATURES:=squashfs
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/brcm47xx/patches-3.8/030-mtd-bcm47xxsflash-add-own-struct-for-abstrating-bus-.patch

@@ -113,7 +113,7 @@
 +#endif /* BCM47XXSFLASH */
 --- a/include/linux/bcma/bcma_driver_chipcommon.h
 +++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -528,6 +528,7 @@ struct bcma_sflash {
+@@ -529,6 +529,7 @@ struct bcma_sflash {
  	u32 size;
  
  	struct mtd_info *mtd;

target/linux/brcm47xx/patches-3.8/060-ssb-add-serial-flash-driver.patch

@@ -351,7 +351,7 @@
  #define SSB_CHIPCO_BCAST_ADDR		0x0050
  #define SSB_CHIPCO_BCAST_DATA		0x0054
  #define SSB_CHIPCO_GPIOPULLUP		0x0058		/* Rev >= 20 only */
-@@ -503,7 +516,7 @@
+@@ -504,7 +517,7 @@
  #define SSB_CHIPCO_FLASHCTL_ST_PP	0x0302		/* Page Program */
  #define SSB_CHIPCO_FLASHCTL_ST_SE	0x02D8		/* Sector Erase */
  #define SSB_CHIPCO_FLASHCTL_ST_BE	0x00C7		/* Bulk Erase */
@@ -360,7 +360,7 @@
  #define SSB_CHIPCO_FLASHCTL_ST_RES	0x03AB		/* Read Electronic Signature */
  #define SSB_CHIPCO_FLASHCTL_ST_CSA	0x1000		/* Keep chip select asserted */
  #define SSB_CHIPCO_FLASHCTL_ST_SSE	0x0220		/* Sub-sector Erase */
-@@ -594,6 +607,9 @@ struct ssb_chipcommon {
+@@ -595,6 +608,9 @@ struct ssb_chipcommon {
  	struct ssb_chipcommon_pmu pmu;
  	u32 ticks_per_ms;
  	u32 max_timer_ms;

target/linux/brcm47xx/patches-3.8/070-bcma-add-functions-to-write-to-serial-flash.patch

@@ -269,7 +269,7 @@
  
  /** ChipCommon core registers. **/
  #define BCMA_CC_ID			0x0000
-@@ -519,19 +520,6 @@ struct bcma_pflash {
+@@ -520,19 +521,6 @@ struct bcma_pflash {
  	u32 window_size;
  };
  
@@ -289,7 +289,7 @@
  #ifdef CONFIG_BCMA_NFLASH
  struct mtd_info;
  
-@@ -565,7 +553,7 @@ struct bcma_drv_cc {
+@@ -566,7 +554,7 @@ struct bcma_drv_cc {
  #ifdef CONFIG_BCMA_DRIVER_MIPS
  	struct bcma_pflash pflash;
  #ifdef CONFIG_BCMA_SFLASH

target/linux/brcm47xx/patches-3.8/700-ssb-gigabit-ethernet-driver.patch

@@ -16,7 +16,7 @@
  	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751)},
  	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751M)},
  	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751F),
-@@ -570,7 +572,9 @@ static void _tw32_flush(struct tg3 *tp,
+@@ -571,7 +573,9 @@ static void _tw32_flush(struct tg3 *tp,
  static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
  {
  	tp->write32_mbox(tp, off, val);
@@ -27,7 +27,7 @@
  		tp->read32_mbox(tp, off);
  }
  
-@@ -580,7 +584,8 @@ static void tg3_write32_tx_mbox(struct t
+@@ -581,7 +585,8 @@ static void tg3_write32_tx_mbox(struct t
  	writel(val, mbox);
  	if (tg3_flag(tp, TXD_MBOX_HWBUG))
  		writel(val, mbox);
@@ -37,7 +37,7 @@
  		readl(mbox);
  }
  
-@@ -1088,7 +1093,8 @@ static void tg3_switch_clocks(struct tg3
+@@ -1089,7 +1094,8 @@ static void tg3_switch_clocks(struct tg3
  
  #define PHY_BUSY_LOOPS	5000
  
@@ -47,7 +47,7 @@
  {
  	u32 frame_val;
  	unsigned int loops;
-@@ -1104,7 +1110,7 @@ static int tg3_readphy(struct tg3 *tp, i
+@@ -1105,7 +1111,7 @@ static int tg3_readphy(struct tg3 *tp, i
  
  	*val = 0x0;
  
@@ -56,7 +56,7 @@
  		      MI_COM_PHY_ADDR_MASK);
  	frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
  		      MI_COM_REG_ADDR_MASK);
-@@ -1141,7 +1147,13 @@ static int tg3_readphy(struct tg3 *tp, i
+@@ -1142,7 +1148,13 @@ static int tg3_readphy(struct tg3 *tp, i
  	return ret;
  }
  
@@ -71,7 +71,7 @@
  {
  	u32 frame_val;
  	unsigned int loops;
-@@ -1159,7 +1171,7 @@ static int tg3_writephy(struct tg3 *tp,
+@@ -1160,7 +1172,7 @@ static int tg3_writephy(struct tg3 *tp,
  
  	tg3_ape_lock(tp, tp->phy_ape_lock);
  
@@ -80,7 +80,7 @@
  		      MI_COM_PHY_ADDR_MASK);
  	frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
  		      MI_COM_REG_ADDR_MASK);
-@@ -1194,6 +1206,11 @@ static int tg3_writephy(struct tg3 *tp,
+@@ -1195,6 +1207,11 @@ static int tg3_writephy(struct tg3 *tp,
  	return ret;
  }
  
@@ -92,7 +92,7 @@
  static int tg3_phy_cl45_write(struct tg3 *tp, u32 devad, u32 addr, u32 val)
  {
  	int err;
-@@ -1778,6 +1795,11 @@ static int tg3_poll_fw(struct tg3 *tp)
+@@ -1779,6 +1796,11 @@ static int tg3_poll_fw(struct tg3 *tp)
  	int i;
  	u32 val;
  
@@ -104,7 +104,7 @@
  	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
  		/* Wait up to 20ms for init done. */
  		for (i = 0; i < 200; i++) {
-@@ -3443,6 +3465,13 @@ static int tg3_halt_cpu(struct tg3 *tp,
+@@ -3444,6 +3466,13 @@ static int tg3_halt_cpu(struct tg3 *tp,
  		tw32_f(offset + CPU_MODE,  CPU_MODE_HALT);
  		udelay(10);
  	} else {
@@ -118,7 +118,7 @@
  		for (i = 0; i < 10000; i++) {
  			tw32(offset + CPU_STATE, 0xffffffff);
  			tw32(offset + CPU_MODE,  CPU_MODE_HALT);
-@@ -3910,8 +3939,9 @@ static int tg3_power_down_prepare(struct
+@@ -3911,8 +3940,9 @@ static int tg3_power_down_prepare(struct
  	tg3_frob_aux_power(tp, true);
  
  	/* Workaround for unstable PLL clock */
@@ -130,7 +130,7 @@
  		u32 val = tr32(0x7d00);
  
  		val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
-@@ -4439,6 +4469,15 @@ relink:
+@@ -4440,6 +4470,15 @@ relink:
  	if (current_link_up == 0 || (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
  		tg3_phy_copper_begin(tp);
  
@@ -146,7 +146,7 @@
  		tg3_readphy(tp, MII_BMSR, &bmsr);
  		if ((!tg3_readphy(tp, MII_BMSR, &bmsr) && (bmsr & BMSR_LSTATUS)) ||
  		    (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
-@@ -4457,6 +4496,26 @@ relink:
+@@ -4458,6 +4497,26 @@ relink:
  	else
  		tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
  
@@ -173,7 +173,7 @@
  	tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
  	if (tp->link_config.active_duplex == DUPLEX_HALF)
  		tp->mac_mode |= MAC_MODE_HALF_DUPLEX;
-@@ -8435,6 +8494,16 @@ static int tg3_chip_reset(struct tg3 *tp
+@@ -8436,6 +8495,16 @@ static int tg3_chip_reset(struct tg3 *tp
  		tw32(0x5000, 0x400);
  	}
  
@@ -190,7 +190,7 @@
  	tw32(GRC_MODE, tp->grc_mode);
  
  	if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
-@@ -10068,6 +10137,11 @@ static void tg3_timer(unsigned long __op
+@@ -10084,6 +10153,11 @@ static void tg3_timer(unsigned long __op
  	    tg3_flag(tp, 57765_CLASS))
  		tg3_chk_missed_msi(tp);
  
@@ -202,7 +202,7 @@
  	if (!tg3_flag(tp, TAGGED_STATUS)) {
  		/* All of this garbage is because when using non-tagged
  		 * IRQ status the mailbox/status_block protocol the chip
-@@ -12941,7 +13015,8 @@ static int tg3_ioctl(struct net_device *
+@@ -12957,7 +13031,8 @@ static int tg3_ioctl(struct net_device *
  			return -EAGAIN;
  
  		spin_lock_bh(&tp->lock);
@@ -212,7 +212,7 @@
  		spin_unlock_bh(&tp->lock);
  
  		data->val_out = mii_regval;
-@@ -12957,7 +13032,8 @@ static int tg3_ioctl(struct net_device *
+@@ -12973,7 +13048,8 @@ static int tg3_ioctl(struct net_device *
  			return -EAGAIN;
  
  		spin_lock_bh(&tp->lock);
@@ -222,7 +222,7 @@
  		spin_unlock_bh(&tp->lock);
  
  		return err;
-@@ -13810,6 +13886,14 @@ static void tg3_get_5720_nvram_info(stru
+@@ -13826,6 +13902,14 @@ static void tg3_get_5720_nvram_info(stru
  /* Chips other than 5700/5701 use the NVRAM for fetching info. */
  static void tg3_nvram_init(struct tg3 *tp)
  {
@@ -237,7 +237,7 @@
  	tw32_f(GRC_EEPROM_ADDR,
  	     (EEPROM_ADDR_FSM_RESET |
  	      (EEPROM_DEFAULT_CLOCK_PERIOD <<
-@@ -14302,10 +14386,19 @@ static int tg3_phy_probe(struct tg3 *tp)
+@@ -14318,10 +14402,19 @@ static int tg3_phy_probe(struct tg3 *tp)
  			 * subsys device table.
  			 */
  			p = tg3_lookup_by_subsys(tp);
@@ -259,7 +259,7 @@
  			if (!tp->phy_id ||
  			    tp->phy_id == TG3_PHY_ID_BCM8002)
  				tp->phy_flags |= TG3_PHYFLG_PHY_SERDES;
-@@ -15353,6 +15446,11 @@ static int tg3_get_invariants(struct tg3
+@@ -15369,6 +15462,11 @@ static int tg3_get_invariants(struct tg3
  		}
  	}
  
@@ -271,7 +271,7 @@
  	/* Get eeprom hw config before calling tg3_set_power_state().
  	 * In particular, the TG3_FLAG_IS_NIC flag must be
  	 * determined before calling tg3_set_power_state() so that
-@@ -15686,12 +15784,19 @@ static int tg3_get_device_address(struct
+@@ -15702,12 +15800,19 @@ static int tg3_get_device_address(struct
  	struct net_device *dev = tp->dev;
  	u32 hi, lo, mac_offset;
  	int addr_ok = 0;
@@ -291,7 +291,7 @@
  	mac_offset = 0x7c;
  	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
  	    tg3_flag(tp, 5780_CLASS)) {
-@@ -16052,6 +16157,8 @@ static int tg3_test_dma(struct tg3 *tp)
+@@ -16068,6 +16173,8 @@ static int tg3_test_dma(struct tg3 *tp)
  			tp->dma_rwctrl |= 0x001b000f;
  		}
  	}
@@ -300,7 +300,7 @@
  
  	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
  	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
-@@ -16396,6 +16503,18 @@ static int tg3_init_one(struct pci_dev *
+@@ -16412,6 +16519,18 @@ static int tg3_init_one(struct pci_dev *
  	else
  		tp->msg_enable = TG3_DEF_MSG_ENABLE;
  
@@ -321,7 +321,7 @@
  	 * setting below.
 --- a/drivers/net/ethernet/broadcom/tg3.h
 +++ b/drivers/net/ethernet/broadcom/tg3.h
-@@ -3030,6 +3030,11 @@ enum TG3_FLAGS {
+@@ -3032,6 +3032,11 @@ enum TG3_FLAGS {
  	TG3_FLAG_57765_PLUS,
  	TG3_FLAG_57765_CLASS,
  	TG3_FLAG_5717_PLUS,

target/linux/brcm47xx/patches-3.8/750-bgmac.patch

@@ -43,7 +43,7 @@ Signed-off-by: David S. Miller <[email protected]>
 
 --- a/drivers/bcma/driver_chipcommon_pmu.c
 +++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -264,7 +264,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
+@@ -280,7 +280,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
  }
  
  /* query bus clock frequency for PMU-enabled chipcommon */
@@ -52,7 +52,7 @@ Signed-off-by: David S. Miller <[email protected]>
  {
  	struct bcma_bus *bus = cc->core->bus;
  
-@@ -293,6 +293,7 @@ static u32 bcma_pmu_get_bus_clock(struct
+@@ -309,6 +309,7 @@ static u32 bcma_pmu_get_bus_clock(struct
  	}
  	return BCMA_CC_PMU_HT_CLOCK;
  }
@@ -1969,7 +1969,7 @@ Signed-off-by: David S. Miller <[email protected]>
 +#endif /* _BGMAC_H */
 --- a/include/linux/bcma/bcma_driver_chipcommon.h
 +++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -623,4 +623,6 @@ extern void bcma_chipco_regctl_maskset(s
+@@ -626,4 +626,6 @@ extern void bcma_chipco_regctl_maskset(s
  				       u32 offset, u32 mask, u32 set);
  extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
  

target/linux/brcm63xx/Makefile

@@ -10,7 +10,7 @@ ARCH:=mips
 BOARD:=brcm63xx
 BOARDNAME:=Broadcom BCM63xx
 FEATURES:=squashfs jffs2 usb atm pci pcmcia
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 MAINTAINER:=Florian Fainelli <[email protected]>
 
 include $(INCLUDE_DIR)/target.mk

target/linux/cns21xx/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Cavium Networks Econa CNS21xx
 FEATURES:=squashfs
 CFLAGS:=-Os -pipe -march=armv4 -mtune=fa526 -fno-caller-saves
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/cns3xxx/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs fpu gpio pcie usb usbgadget
 CFLAGS:=-Os -pipe -march=armv6k -mtune=mpcore -mfloat-abi=softfp -mfpu=vfp -fno-caller-saves
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ep93xx/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs jffs2 ext4 targz usb display sound
 CFLAGS:=-Os -pipe -march=armv4t -fno-caller-saves
 MAINTAINER:=Florian Fainelli <[email protected]>
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 DEVICE_TYPE:=developerboard
 

target/linux/generic/patches-3.8/020-ssb_update.patch

@@ -167,7 +167,7 @@
 +}
 --- a/drivers/ssb/driver_gpio.c
 +++ b/drivers/ssb/driver_gpio.c
-@@ -74,6 +74,16 @@ static void ssb_gpio_chipco_free(struct 
+@@ -74,6 +74,16 @@ static void ssb_gpio_chipco_free(struct
  	ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
  }
  
@@ -253,7 +253,7 @@
  
  static inline u32 mips_read32(struct ssb_mipscore *mcore,
  			      u16 offset)
-@@ -189,34 +209,43 @@ static void ssb_mips_serial_init(struct 
+@@ -189,34 +209,43 @@ static void ssb_mips_serial_init(struct
  static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
  {
  	struct ssb_bus *bus = mcore->dev->bus;
@@ -363,53 +363,6 @@
  #endif /* CONFIG_SSB_DRIVER_MIPS */
  
  #endif /* LINUX_SSB_MIPSCORE_H_ */
---- a/drivers/net/wireless/b43/phy_n.c
-+++ b/drivers/net/wireless/b43/phy_n.c
-@@ -5165,7 +5165,8 @@ static void b43_nphy_pmu_spur_avoid(stru
- #endif
- #ifdef CONFIG_B43_SSB
- 	case B43_BUS_SSB:
--		/* FIXME */
-+		ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco,
-+					    avoid);
- 		break;
- #endif
- 	}
---- a/drivers/ssb/driver_chipcommon_pmu.c
-+++ b/drivers/ssb/driver_chipcommon_pmu.c
-@@ -675,3 +675,32 @@ u32 ssb_pmu_get_controlclock(struct ssb_
- 		return 0;
- 	}
- }
-+
-+void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
-+{
-+	u32 pmu_ctl = 0;
-+
-+	switch (cc->dev->bus->chip_id) {
-+	case 0x4322:
-+		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070);
-+		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a);
-+		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854);
-+		if (spuravoid == 1)
-+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828);
-+		else
-+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828);
-+		pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
-+		break;
-+	case 43222:
-+		/* TODO: BCM43222 requires updating PLLs too */
-+		return;
-+	default:
-+		ssb_printk(KERN_ERR PFX
-+			   "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
-+			   cc->dev->bus->chip_id);
-+		return;
-+	}
-+
-+	chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl);
-+}
-+EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
 --- a/drivers/ssb/pci.c
 +++ b/drivers/ssb/pci.c
 @@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
@@ -453,23 +406,6 @@
  }
  
  /* Revs 4 5 and 8 have partially shared layout */
---- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -219,6 +219,7 @@
- #define SSB_CHIPCO_PMU_CTL			0x0600 /* PMU control */
- #define  SSB_CHIPCO_PMU_CTL_ILP_DIV		0xFFFF0000 /* ILP div mask */
- #define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT	16
-+#define  SSB_CHIPCO_PMU_CTL_PLL_UPD		0x00000400
- #define  SSB_CHIPCO_PMU_CTL_NOILPONW		0x00000200 /* No ILP on wait */
- #define  SSB_CHIPCO_PMU_CTL_HTREQEN		0x00000100 /* HT req enable */
- #define  SSB_CHIPCO_PMU_CTL_ALPREQEN		0x00000080 /* ALP req enable */
-@@ -667,5 +668,6 @@ enum ssb_pmu_ldo_volt_id {
- void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
- 			     enum ssb_pmu_ldo_volt_id id, u32 voltage);
- void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
-+void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid);
- 
- #endif /* LINUX_SSB_CHIPCO_H_ */
 --- a/include/linux/ssb/ssb_regs.h
 +++ b/include/linux/ssb/ssb_regs.h
 @@ -289,11 +289,11 @@

target/linux/generic/patches-3.8/025-bcma_backport.patch

@@ -558,7 +558,7 @@
  		return cap_ptr;
  
  	/* check if the capability pointer field exists */
-@@ -426,7 +429,7 @@ void bcma_core_pci_hostmode_init(struct 
+@@ -426,7 +429,7 @@ void bcma_core_pci_hostmode_init(struct
  	/* Reset RC */
  	usleep_range(3000, 5000);
  	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
@@ -567,7 +567,7 @@
  	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
  			BCMA_CORE_PCI_CTL_RST_OE);
  
-@@ -488,6 +491,17 @@ void bcma_core_pci_hostmode_init(struct 
+@@ -488,6 +491,17 @@ void bcma_core_pci_hostmode_init(struct
  
  	bcma_core_pci_enable_crs(pc);
  
@@ -594,7 +594,7 @@
  	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
  
  	return 0;
-@@ -595,6 +609,6 @@ int bcma_core_pci_pcibios_map_irq(const 
+@@ -595,6 +609,6 @@ int bcma_core_pci_pcibios_map_irq(const
  
  	pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
  			       pci_ops);

target/linux/generic/patches-3.8/950-vm_exports.patch

@@ -52,7 +52,7 @@
   * When we die, we re-parent all our children, and try to:
 --- a/kernel/sched/core.c
 +++ b/kernel/sched/core.c
-@@ -3634,6 +3634,7 @@ int can_nice(const struct task_struct *p
+@@ -3636,6 +3636,7 @@ int can_nice(const struct task_struct *p
  	return (nice_rlim <= task_rlimit(p, RLIMIT_NICE) ||
  		capable(CAP_SYS_NICE));
  }

target/linux/lantiq/Makefile

@@ -11,7 +11,7 @@ BOARDNAME:=Lantiq GPON/XWAY/SVIP
 FEATURES:=squashfs jffs2
 SUBTARGETS=xway ase falcon
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 CFLAGS=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -mno-branch-likely
 

target/linux/malta/Makefile

@@ -12,7 +12,7 @@ SUBTARGETS:=le be le64 be64
 INITRAMFS_EXTRA_FILES:=
 MAINTAINER:=Florian Fainelli <[email protected]>
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 DEVICE_TYPE:=developerboard
 

target/linux/mpc52xx/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Freescale MPC52xx
 CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=603e
 FEATURES:=targz ext4
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/mpc83xx/Makefile

@@ -13,7 +13,7 @@ CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=603e
 FEATURES:=squashfs targz
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/mpc85xx/Makefile

@@ -13,7 +13,7 @@ CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=8540
 FEATURES:=spe_fpu squashfs
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/mvebu/Makefile

@@ -13,7 +13,7 @@ FEATURES:=targz usb jffs2 pci pcie gpio
 CFLAGS:=-Os -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=softfp
 MAINTAINER:=Florian Fainelli <[email protected]>
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ppc40x/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs
 CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=405
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ppc44x/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs broken
 CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=440
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ramips/Makefile

@@ -13,7 +13,7 @@ SUBTARGETS:=rt288x rt305x rt3883
 CFLAGS:=-Os -pipe -fno-caller-saves -mno-branch-likely
 FEATURES:=squashfs gpio
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES+=\

target/linux/rb532/Makefile

@@ -11,7 +11,7 @@ BOARD:=rb532
 BOARDNAME:=Mikrotik RouterBoard 532
 FEATURES:=jffs2 pci targz broken
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += wpad-mini kmod-madwifi kmod-input-rb532

target/linux/realview/Makefile

@@ -13,7 +13,7 @@ FEATURES:=fpu ramdisk
 CFLAGS:=-Os -pipe -march=armv6k -mtune=mpcore -mfloat-abi=softfp -mfpu=vfp -fno-caller-saves
 MAINTAINER:=Florian Fainelli <[email protected]>
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 DEVICE_TYPE:=developerboard
 

target/linux/uml/Makefile

@@ -23,7 +23,7 @@ BOARDNAME:=User Mode Linux
 FEATURES:=ext4 audio
 MAINTAINER:=Florian Fainelli <[email protected]>
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/x86/alix2/target.mk

@@ -19,7 +19,7 @@ DEFAULT_PACKAGES += \
 			kmod-ledtrig-heartbeat kmod-ledtrig-gpio \
 			kmod-ledtrig-netdev \
 			kmod-cpu-msr hwclock wpad
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 CS5535_MASK:=0x0b000042
 
 CFLAGS += -march=geode -Os -mmmx -m3dnow -fno-align-jumps -fno-align-functions \

target/linux/x86/generic/target.mk

@@ -1,6 +1,6 @@
 BOARDNAME:=Generic
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 define Target/Description
 	Build firmware images for x86 based boards

target/linux/xburst/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Ingenic XBurst
 FEATURES:=jffs2 targz ubifs audio broken
 SUBTARGETS:=qi_lb60 n516 n526 id800wt
 
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
 
 DEVICE_TYPE=other