fix cryptodev compile

SVN-Revision: 11804

package/openssl/patches/205-use_local_cryptodev_h.patch

@@ -0,0 +1,494 @@
+diff -Nur openssl-0.9.8h/crypto/engine/cryptodev.h openssl-0.9.8h-ocf/crypto/engine/cryptodev.h
+--- openssl-0.9.8h/crypto/engine/cryptodev.h	1970-01-01 01:00:00.000000000 +0100
++++ openssl-0.9.8h-ocf/crypto/engine/cryptodev.h	2008-07-13 15:32:53.000000000 +0200
+@@ -0,0 +1,478 @@
++/*	$FreeBSD: src/sys/opencrypto/cryptodev.h,v 1.25 2007/05/09 19:37:02 gnn Exp $	*/
++/*	$OpenBSD: cryptodev.h,v 1.31 2002/06/11 11:14:29 beck Exp $	*/
++
++/*-
++ * Linux port done by David McCullough <[email protected]>
++ * Copyright (C) 2006-2007 David McCullough
++ * Copyright (C) 2004-2005 Intel Corporation.
++ * The license and original author are listed below.
++ *
++ * The author of this code is Angelos D. Keromytis ([email protected])
++ * Copyright (c) 2002-2006 Sam Leffler, Errno Consulting
++ *
++ * This code was written by Angelos D. Keromytis in Athens, Greece, in
++ * February 2000. Network Security Technologies Inc. (NSTI) kindly
++ * supported the development of this code.
++ *
++ * Copyright (c) 2000 Angelos D. Keromytis
++ *
++ * Permission to use, copy, and modify this software with or without fee
++ * is hereby granted, provided that this entire notice is included in
++ * all source code copies of any software which is or includes a copy or
++ * modification of this software.
++ *
++ * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR
++ * IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY
++ * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE
++ * MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR
++ * PURPOSE.
++ *
++ * Copyright (c) 2001 Theo de Raadt
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ *
++ * 1. Redistributions of source code must retain the above copyright
++ *   notice, this list of conditions and the following disclaimer.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *   notice, this list of conditions and the following disclaimer in the
++ *   documentation and/or other materials provided with the distribution.
++ * 3. The name of the author may not be used to endorse or promote products
++ *   derived from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
++ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
++ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * Effort sponsored in part by the Defense Advanced Research Projects
++ * Agency (DARPA) and Air Force Research Laboratory, Air Force
++ * Materiel Command, USAF, under agreement number F30602-01-2-0537.
++ *
++ */
++
++#ifndef _CRYPTO_CRYPTO_H_
++#define _CRYPTO_CRYPTO_H_
++
++/* Some initial values */
++#define CRYPTO_DRIVERS_INITIAL	4
++#define CRYPTO_SW_SESSIONS	32
++
++/* Hash values */
++#define NULL_HASH_LEN		0
++#define MD5_HASH_LEN		16
++#define SHA1_HASH_LEN		20
++#define RIPEMD160_HASH_LEN	20
++#define SHA2_256_HASH_LEN	32
++#define SHA2_384_HASH_LEN	48
++#define SHA2_512_HASH_LEN	64
++#define MD5_KPDK_HASH_LEN	16
++#define SHA1_KPDK_HASH_LEN	20
++/* Maximum hash algorithm result length */
++#define HASH_MAX_LEN		SHA2_512_HASH_LEN /* Keep this updated */
++
++/* HMAC values */
++#define NULL_HMAC_BLOCK_LEN			1
++#define MD5_HMAC_BLOCK_LEN			64
++#define SHA1_HMAC_BLOCK_LEN			64
++#define RIPEMD160_HMAC_BLOCK_LEN	64
++#define SHA2_256_HMAC_BLOCK_LEN		64
++#define SHA2_384_HMAC_BLOCK_LEN		128
++#define SHA2_512_HMAC_BLOCK_LEN		128
++/* Maximum HMAC block length */
++#define HMAC_MAX_BLOCK_LEN		SHA2_512_HMAC_BLOCK_LEN /* Keep this updated */
++#define HMAC_IPAD_VAL			0x36
++#define HMAC_OPAD_VAL			0x5C
++
++/* Encryption algorithm block sizes */
++#define NULL_BLOCK_LEN			1
++#define DES_BLOCK_LEN			8
++#define DES3_BLOCK_LEN			8
++#define BLOWFISH_BLOCK_LEN		8
++#define SKIPJACK_BLOCK_LEN		8
++#define CAST128_BLOCK_LEN		8
++#define RIJNDAEL128_BLOCK_LEN	16
++#define AES_BLOCK_LEN			RIJNDAEL128_BLOCK_LEN
++#define CAMELLIA_BLOCK_LEN		16
++#define ARC4_BLOCK_LEN			1
++#define EALG_MAX_BLOCK_LEN		AES_BLOCK_LEN /* Keep this updated */
++
++/* Encryption algorithm min and max key sizes */
++#define NULL_MIN_KEY_LEN		0
++#define NULL_MAX_KEY_LEN		0
++#define DES_MIN_KEY_LEN			8
++#define DES_MAX_KEY_LEN			8
++#define DES3_MIN_KEY_LEN		24
++#define DES3_MAX_KEY_LEN		24
++#define BLOWFISH_MIN_KEY_LEN	4
++#define BLOWFISH_MAX_KEY_LEN	56
++#define SKIPJACK_MIN_KEY_LEN	10
++#define SKIPJACK_MAX_KEY_LEN	10
++#define CAST128_MIN_KEY_LEN		5
++#define CAST128_MAX_KEY_LEN		16
++#define RIJNDAEL128_MIN_KEY_LEN	16
++#define RIJNDAEL128_MAX_KEY_LEN	32
++#define AES_MIN_KEY_LEN			RIJNDAEL128_MIN_KEY_LEN
++#define AES_MAX_KEY_LEN			RIJNDAEL128_MAX_KEY_LEN
++#define CAMELLIA_MIN_KEY_LEN	16
++#define CAMELLIA_MAX_KEY_LEN	32
++#define ARC4_MIN_KEY_LEN		1
++#define ARC4_MAX_KEY_LEN		256
++
++/* Max size of data that can be processed */
++#define CRYPTO_MAX_DATA_LEN		64*1024 - 1
++
++#define CRYPTO_ALGORITHM_MIN	1
++#define CRYPTO_DES_CBC			1
++#define CRYPTO_3DES_CBC			2
++#define CRYPTO_BLF_CBC			3
++#define CRYPTO_CAST_CBC			4
++#define CRYPTO_SKIPJACK_CBC		5
++#define CRYPTO_MD5_HMAC			6
++#define CRYPTO_SHA1_HMAC		7
++#define CRYPTO_RIPEMD160_HMAC	8
++#define CRYPTO_MD5_KPDK			9
++#define CRYPTO_SHA1_KPDK		10
++#define CRYPTO_RIJNDAEL128_CBC	11 /* 128 bit blocksize */
++#define CRYPTO_AES_CBC			11 /* 128 bit blocksize -- the same as above */
++#define CRYPTO_ARC4				12
++#define CRYPTO_MD5				13
++#define CRYPTO_SHA1				14
++#define CRYPTO_NULL_HMAC		15
++#define CRYPTO_NULL_CBC			16
++#define CRYPTO_DEFLATE_COMP		17 /* Deflate compression algorithm */
++#define CRYPTO_SHA2_256_HMAC	18
++#define CRYPTO_SHA2_384_HMAC	19
++#define CRYPTO_SHA2_512_HMAC	20
++#define CRYPTO_CAMELLIA_CBC		21
++#define CRYPTO_SHA2_256			22
++#define CRYPTO_SHA2_384			23
++#define CRYPTO_SHA2_512			24
++#define CRYPTO_RIPEMD160		25
++#define CRYPTO_ALGORITHM_MAX	25 /* Keep updated - see below */
++
++/* Algorithm flags */
++#define CRYPTO_ALG_FLAG_SUPPORTED	0x01 /* Algorithm is supported */
++#define CRYPTO_ALG_FLAG_RNG_ENABLE	0x02 /* Has HW RNG for DH/DSA */
++#define CRYPTO_ALG_FLAG_DSA_SHA		0x04 /* Can do SHA on msg */
++
++/*
++ * Crypto driver/device flags.  They can set in the crid
++ * parameter when creating a session or submitting a key
++ * op to affect the device/driver assigned.  If neither
++ * of these are specified then the crid is assumed to hold
++ * the driver id of an existing (and suitable) device that
++ * must be used to satisfy the request.
++ */
++#define CRYPTO_FLAG_HARDWARE	0x01000000	/* hardware accelerated */
++#define CRYPTO_FLAG_SOFTWARE	0x02000000	/* software implementation */
++
++/* NB: deprecated */
++struct session_op {
++	u_int32_t	cipher;		/* ie. CRYPTO_DES_CBC */
++	u_int32_t	mac;		/* ie. CRYPTO_MD5_HMAC */
++
++	u_int32_t	keylen;		/* cipher key */
++	caddr_t		key;
++	int		mackeylen;	/* mac key */
++	caddr_t		mackey;
++
++  	u_int32_t	ses;		/* returns: session # */ 
++};
++
++struct session2_op {
++	u_int32_t	cipher;		/* ie. CRYPTO_DES_CBC */
++	u_int32_t	mac;		/* ie. CRYPTO_MD5_HMAC */
++
++	u_int32_t	keylen;		/* cipher key */
++	caddr_t		key;
++	int		mackeylen;	/* mac key */
++	caddr_t		mackey;
++
++  	u_int32_t	ses;		/* returns: session # */ 
++	int		crid;		/* driver id + flags (rw) */
++	int		pad[4];		/* for future expansion */
++};
++
++struct crypt_op {
++	u_int32_t	ses;
++	u_int16_t	op;		/* i.e. COP_ENCRYPT */
++#define COP_NONE	0
++#define COP_ENCRYPT	1
++#define COP_DECRYPT	2
++	u_int16_t	flags;
++#define	COP_F_BATCH	0x0008		/* Batch op if possible */
++	u_int		len;
++	caddr_t		src, dst;	/* become iov[] inside kernel */
++	caddr_t		mac;		/* must be big enough for chosen MAC */
++	caddr_t		iv;
++};
++
++/*
++ * Parameters for looking up a crypto driver/device by
++ * device name or by id.  The latter are returned for
++ * created sessions (crid) and completed key operations.
++ */
++struct crypt_find_op {
++	int		crid;		/* driver id + flags */
++	char		name[32];	/* device/driver name */
++};
++
++/* bignum parameter, in packed bytes, ... */
++struct crparam {
++	caddr_t		crp_p;
++	u_int		crp_nbits;
++};
++
++#define CRK_MAXPARAM	8
++
++struct crypt_kop {
++	u_int		crk_op;		/* ie. CRK_MOD_EXP or other */
++	u_int		crk_status;	/* return status */
++	u_short		crk_iparams;	/* # of input parameters */
++	u_short		crk_oparams;	/* # of output parameters */
++	u_int		crk_crid;	/* NB: only used by CIOCKEY2 (rw) */
++	struct crparam	crk_param[CRK_MAXPARAM];
++};
++#define CRK_ALGORITM_MIN	0
++#define CRK_MOD_EXP		0
++#define CRK_MOD_EXP_CRT		1
++#define CRK_DSA_SIGN		2
++#define CRK_DSA_VERIFY		3
++#define CRK_DH_COMPUTE_KEY	4
++#define CRK_ALGORITHM_MAX	4 /* Keep updated - see below */
++
++#define CRF_MOD_EXP		(1 << CRK_MOD_EXP)
++#define CRF_MOD_EXP_CRT		(1 << CRK_MOD_EXP_CRT)
++#define CRF_DSA_SIGN		(1 << CRK_DSA_SIGN)
++#define CRF_DSA_VERIFY		(1 << CRK_DSA_VERIFY)
++#define CRF_DH_COMPUTE_KEY	(1 << CRK_DH_COMPUTE_KEY)
++
++/*
++ * done against open of /dev/crypto, to get a cloned descriptor.
++ * Please use F_SETFD against the cloned descriptor.
++ */
++#define CRIOGET		_IOWR('c', 100, u_int32_t)
++#define CRIOASYMFEAT	CIOCASYMFEAT
++#define CRIOFINDDEV	CIOCFINDDEV
++
++/* the following are done against the cloned descriptor */
++#define CIOCGSESSION	_IOWR('c', 101, struct session_op)
++#define CIOCFSESSION	_IOW('c', 102, u_int32_t)
++#define CIOCCRYPT	_IOWR('c', 103, struct crypt_op)
++#define CIOCKEY		_IOWR('c', 104, struct crypt_kop)
++#define CIOCASYMFEAT	_IOR('c', 105, u_int32_t)
++#define CIOCGSESSION2	_IOWR('c', 106, struct session2_op)
++#define CIOCKEY2	_IOWR('c', 107, struct crypt_kop)
++#define CIOCFINDDEV	_IOWR('c', 108, struct crypt_find_op)
++
++struct cryptotstat {
++	struct timespec	acc;		/* total accumulated time */
++	struct timespec	min;		/* min time */
++	struct timespec	max;		/* max time */
++	u_int32_t	count;		/* number of observations */
++};
++
++struct cryptostats {
++	u_int32_t	cs_ops;		/* symmetric crypto ops submitted */
++	u_int32_t	cs_errs;	/* symmetric crypto ops that failed */
++	u_int32_t	cs_kops;	/* asymetric/key ops submitted */
++	u_int32_t	cs_kerrs;	/* asymetric/key ops that failed */
++	u_int32_t	cs_intrs;	/* crypto swi thread activations */
++	u_int32_t	cs_rets;	/* crypto return thread activations */
++	u_int32_t	cs_blocks;	/* symmetric op driver block */
++	u_int32_t	cs_kblocks;	/* symmetric op driver block */
++	/*
++	 * When CRYPTO_TIMING is defined at compile time and the
++	 * sysctl debug.crypto is set to 1, the crypto system will
++	 * accumulate statistics about how long it takes to process
++	 * crypto requests at various points during processing.
++	 */
++	struct cryptotstat cs_invoke;	/* crypto_dipsatch -> crypto_invoke */
++	struct cryptotstat cs_done;	/* crypto_invoke -> crypto_done */
++	struct cryptotstat cs_cb;	/* crypto_done -> callback */
++	struct cryptotstat cs_finis;	/* callback -> callback return */
++
++	u_int32_t	cs_drops;		/* crypto ops dropped due to congestion */
++};
++
++#ifdef __KERNEL__
++
++/* Standard initialization structure beginning */
++struct cryptoini {
++	int		cri_alg;	/* Algorithm to use */
++	int		cri_klen;	/* Key length, in bits */
++	int		cri_mlen;	/* Number of bytes we want from the
++					   entire hash. 0 means all. */
++	caddr_t		cri_key;	/* key to use */
++	u_int8_t	cri_iv[EALG_MAX_BLOCK_LEN];	/* IV to use */
++	struct cryptoini *cri_next;
++};
++
++/* Describe boundaries of a single crypto operation */
++struct cryptodesc {
++	int		crd_skip;	/* How many bytes to ignore from start */
++	int		crd_len;	/* How many bytes to process */
++	int		crd_inject;	/* Where to inject results, if applicable */
++	int		crd_flags;
++
++#define CRD_F_ENCRYPT		0x01	/* Set when doing encryption */
++#define CRD_F_IV_PRESENT	0x02	/* When encrypting, IV is already in
++					   place, so don't copy. */
++#define CRD_F_IV_EXPLICIT	0x04	/* IV explicitly provided */
++#define CRD_F_DSA_SHA_NEEDED	0x08	/* Compute SHA-1 of buffer for DSA */
++#define CRD_F_KEY_EXPLICIT	0x10	/* Key explicitly provided */
++#define CRD_F_COMP		0x0f    /* Set when doing compression */
++
++	struct cryptoini	CRD_INI; /* Initialization/context data */
++#define crd_iv		CRD_INI.cri_iv
++#define crd_key		CRD_INI.cri_key
++#define crd_alg		CRD_INI.cri_alg
++#define crd_klen	CRD_INI.cri_klen
++
++	struct cryptodesc *crd_next;
++};
++
++/* Structure describing complete operation */
++struct cryptop {
++	struct list_head crp_next;
++	wait_queue_head_t crp_waitq;
++
++	u_int64_t	crp_sid;	/* Session ID */
++	int		crp_ilen;	/* Input data total length */
++	int		crp_olen;	/* Result total length */
++
++	int		crp_etype;	/*
++					 * Error type (zero means no error).
++					 * All error codes except EAGAIN
++					 * indicate possible data corruption (as in,
++					 * the data have been touched). On all
++					 * errors, the crp_sid may have changed
++					 * (reset to a new one), so the caller
++					 * should always check and use the new
++					 * value on future requests.
++					 */
++	int		crp_flags;
++
++#define CRYPTO_F_SKBUF		0x0001	/* Input/output are skbuf chains */
++#define CRYPTO_F_IOV		0x0002	/* Input/output are uio */
++#define CRYPTO_F_REL		0x0004	/* Must return data in same place */
++#define CRYPTO_F_BATCH		0x0008	/* Batch op if possible */
++#define CRYPTO_F_CBIMM		0x0010	/* Do callback immediately */
++#define CRYPTO_F_DONE		0x0020	/* Operation completed */
++#define CRYPTO_F_CBIFSYNC	0x0040	/* Do CBIMM if op is synchronous */
++
++	caddr_t		crp_buf;	/* Data to be processed */
++	caddr_t		crp_opaque;	/* Opaque pointer, passed along */
++	struct cryptodesc *crp_desc;	/* Linked list of processing descriptors */
++
++	int (*crp_callback)(struct cryptop *); /* Callback function */
++};
++
++#define CRYPTO_BUF_CONTIG	0x0
++#define CRYPTO_BUF_IOV		0x1
++#define CRYPTO_BUF_SKBUF		0x2
++
++#define CRYPTO_OP_DECRYPT	0x0
++#define CRYPTO_OP_ENCRYPT	0x1
++
++/*
++ * Hints passed to process methods.
++ */
++#define CRYPTO_HINT_MORE	0x1	/* more ops coming shortly */
++
++struct cryptkop {
++	struct list_head krp_next;
++	wait_queue_head_t krp_waitq;
++
++	int		krp_flags;
++#define CRYPTO_KF_DONE		0x0001	/* Operation completed */
++#define CRYPTO_KF_CBIMM		0x0002	/* Do callback immediately */
++
++	u_int		krp_op;		/* ie. CRK_MOD_EXP or other */
++	u_int		krp_status;	/* return status */
++	u_short		krp_iparams;	/* # of input parameters */
++	u_short		krp_oparams;	/* # of output parameters */
++	u_int		krp_crid;	/* desired device, etc. */
++	u_int32_t	krp_hid;
++	struct crparam	krp_param[CRK_MAXPARAM];	/* kvm */
++	int		(*krp_callback)(struct cryptkop *);
++};
++
++#include <ocf-compat.h>
++
++/*
++ * Session ids are 64 bits.  The lower 32 bits contain a "local id" which
++ * is a driver-private session identifier.  The upper 32 bits contain a
++ * "hardware id" used by the core crypto code to identify the driver and
++ * a copy of the driver's capabilities that can be used by client code to
++ * optimize operation.
++ */
++#define CRYPTO_SESID2HID(_sid)	(((_sid) >> 32) & 0x00ffffff)
++#define CRYPTO_SESID2CAPS(_sid)	(((_sid) >> 32) & 0xff000000)
++#define CRYPTO_SESID2LID(_sid)	(((u_int32_t) (_sid)) & 0xffffffff)
++
++extern	int crypto_newsession(u_int64_t *sid, struct cryptoini *cri, int hard);
++extern	int crypto_freesession(u_int64_t sid);
++#define CRYPTOCAP_F_HARDWARE	CRYPTO_FLAG_HARDWARE
++#define CRYPTOCAP_F_SOFTWARE	CRYPTO_FLAG_SOFTWARE
++#define CRYPTOCAP_F_SYNC	0x04000000	/* operates synchronously */
++extern	int32_t crypto_get_driverid(device_t dev, int flags);
++extern	int crypto_find_driver(const char *);
++extern	device_t crypto_find_device_byhid(int hid);
++extern	int crypto_getcaps(int hid);
++extern	int crypto_register(u_int32_t driverid, int alg, u_int16_t maxoplen,
++	    u_int32_t flags);
++extern	int crypto_kregister(u_int32_t, int, u_int32_t);
++extern	int crypto_unregister(u_int32_t driverid, int alg);
++extern	int crypto_unregister_all(u_int32_t driverid);
++extern	int crypto_dispatch(struct cryptop *crp);
++extern	int crypto_kdispatch(struct cryptkop *);
++#define CRYPTO_SYMQ	0x1
++#define CRYPTO_ASYMQ	0x2
++extern	int crypto_unblock(u_int32_t, int);
++extern	void crypto_done(struct cryptop *crp);
++extern	void crypto_kdone(struct cryptkop *);
++extern	int crypto_getfeat(int *);
++
++extern	void crypto_freereq(struct cryptop *crp);
++extern	struct cryptop *crypto_getreq(int num);
++
++extern  int crypto_usercrypto;      /* userland may do crypto requests */
++extern  int crypto_userasymcrypto;  /* userland may do asym crypto reqs */
++extern  int crypto_devallowsoft;    /* only use hardware crypto */
++
++/*
++ * random number support,  crypto_unregister_all will unregister
++ */
++extern int crypto_rregister(u_int32_t driverid,
++		int (*read_random)(void *arg, u_int32_t *buf, int len), void *arg);
++extern int crypto_runregister_all(u_int32_t driverid);
++
++/*
++ * Crypto-related utility routines used mainly by drivers.
++ *
++ * XXX these don't really belong here; but for now they're
++ *     kept apart from the rest of the system.
++ */
++struct uio;
++extern	void cuio_copydata(struct uio* uio, int off, int len, caddr_t cp);
++extern	void cuio_copyback(struct uio* uio, int off, int len, caddr_t cp);
++extern	struct iovec *cuio_getptr(struct uio *uio, int loc, int *off);
++
++extern	void crypto_copyback(int flags, caddr_t buf, int off, int size,
++	    caddr_t in);
++extern	void crypto_copydata(int flags, caddr_t buf, int off, int size,
++	    caddr_t out);
++extern	int crypto_apply(int flags, caddr_t buf, int off, int len,
++	    int (*f)(void *, void *, u_int), void *arg);
++
++#endif /* __KERNEL__ */
++#endif /* _CRYPTO_CRYPTO_H_ */
+diff -Nur openssl-0.9.8h/crypto/engine/eng_cryptodev.c openssl-0.9.8h-ocf/crypto/engine/eng_cryptodev.c
+--- openssl-0.9.8h/crypto/engine/eng_cryptodev.c	2008-07-13 15:32:53.000000000 +0200
++++ openssl-0.9.8h-ocf/crypto/engine/eng_cryptodev.c	2008-07-13 15:34:19.000000000 +0200
+@@ -54,7 +54,7 @@
+ #else 
+  
+ #include <sys/types.h>
+-#include <crypto/cryptodev.h>
++#include "cryptodev.h"
+ #include <sys/ioctl.h>
+ #include <errno.h>
+ #include <stdio.h>