mediatek: mt7622: sync buffalo.sh with ramips/mt7621

Sync buffalo.sh with the one in ramips/mt7621 to improve handling of the
TRX magic numbers of Buffalo WSR devices and switching sysupgrade method
between buffalo_upgrade_ubinized() and nand_do_upgrade().

Signed-off-by: INAGAKI Hiroshi <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/17408
Signed-off-by: Hauke Mehrtens <[email protected]>

target/linux/mediatek/mt7622/base-files/lib/upgrade/buffalo.sh

@@ -34,20 +34,30 @@
 #
 # The mtd partitions "firmware" and "Kernel2" on NAND flash are os-image
 # partitions. These partitions are called as "Image1/Image2" in U-Boot
-# on WSR-2533DHP2, and they are checked conditions when booting.
+# on WSR devices, and they are checked conditions when booting.
 # "Image1" is always used for booting.
 #
 # == U-Boot Behaviors ==
 # - "Image1"/"Image2" images are good, images are different or
 #   "Image2" image is broken
-#   -> writes os-image to "Image2" from "Image1"
+#   -> copy os-image to "Image2" from "Image1"
 #
 # - "Image1" image is broken
-#   -> writes os-image to "Image1" from "Image2"
+#   -> copy os-image to "Image1" from "Image2"
 #
 # - "Image1"/"Image2" images are broken
 #   -> fall to U-Boot command line
 
+# TRX magic numbers of each model
+case "$(board_name)" in
+buffalo,wsr-2533dhp2)
+	BUFFALO_TRX_MAGIC="44485032" # "DHP2"
+	;;
+buffalo,wsr-3200ax4s)
+	BUFFALO_TRX_MAGIC="44485033" # "DHP3"
+	;;
+esac
+
 buffalo_check_image() {
 	local board="$1"
 	local boardname="$(echo $board | tr ',' '_')"
@@ -56,7 +66,7 @@ buffalo_check_image() {
 
 	# return error state if TRX + UBI formatted image specified
 	# to notify about configurations
-	if [ "$magic" = "44485032" -o "$magic" = "44485033" ]; then
+	if [ "$magic" = "$BUFFALO_TRX_MAGIC" ]; then
 		echo "Your configurations won't be saved if factory-uboot.bin image specified."
 		echo "But if you want to upgrade, please execute sysupgrade with \"-F\" option."
 		return 1
@@ -124,3 +134,12 @@ buffalo_upgrade_ubinized() {
 		exit 1
 	fi
 }
+
+buffalo_do_upgrade() {
+	if [ "$(get_magic_long "$1")" = "$BUFFALO_TRX_MAGIC" ]; then
+		buffalo_upgrade_ubinized "$1"
+	else
+		CI_KERNPART="firmware"
+		nand_do_upgrade "$1"
+	fi
+}

target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh

@@ -16,16 +16,7 @@ platform_do_upgrade() {
 		;;
 	buffalo,wsr-2533dhp2|\
 	buffalo,wsr-3200ax4s)
-		local magic="$(get_magic_long "$1")"
-
-		# use "mtd write" if the magic is "DHP2 (0x44485032)"
-		# or "DHP3 (0x44485033)"
-		if [ "$magic" = "44485032" -o "$magic" = "44485033" ]; then
-			buffalo_upgrade_ubinized "$1"
-		else
-			CI_KERNPART="firmware"
-			nand_do_upgrade "$1"
-		fi
+		buffalo_do_upgrade "$1"
 		;;
 	dlink,eagle-pro-ai-m32-a1|\
 	dlink,eagle-pro-ai-r32-a1|\