ipq807x: sax1v1k: fix sysupgrade not touching rootfs_data

Before this commit, sysupgrade saved the settings backup data to
the area following rootfs even though the device has an actual
rootfs_data partition. The backup data was completely ignored on
the following boot, but since rootfs_data was not being cleared
during sysupgrade, the issue was not noticed earlier.

Note that this commit changes the filesystem of rootfs_data from
ext4 to F2FS (if OEM partitioning is used).

Signed-off-by: Rodrigo Balerdi <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/16463
Signed-off-by: Robert Marko <[email protected]>

target/linux/qualcommax/image/ipq807x.mk

@@ -340,7 +340,7 @@ define Device/spectrum_sax1v1k
 	DEVICE_DTS_CONFIG := config@rt5010w-d187-rev6
 	SOC := ipq8072
 	IMAGES := sysupgrade.bin
-	DEVICE_PACKAGES := ipq-wifi-spectrum_sax1v1k
+	DEVICE_PACKAGES := kmod-fs-f2fs f2fs-tools ipq-wifi-spectrum_sax1v1k
 endef
 TARGET_DEVICES += spectrum_sax1v1k
 

target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh

@@ -184,8 +184,7 @@ platform_do_upgrade() {
 		nand_do_upgrade "$1"
 		;;
 	prpl,haze|\
-	qnap,301w|\
-	spectrum,sax1v1k)
+	qnap,301w)
 		kernelname="0:HLOS"
 		rootfsname="rootfs"
 		mmc_do_upgrade "$1"
@@ -212,6 +211,12 @@ platform_do_upgrade() {
 		CI_ROOT_UBIPART="rootfs"
 		nand_do_upgrade "$1"
 		;;
+	spectrum,sax1v1k)
+		CI_KERNPART="0:HLOS"
+		CI_ROOTPART="rootfs"
+		CI_DATAPART="rootfs_data"
+		emmc_do_upgrade "$1"
+		;;
 	yuncore,ax880)
 		active="$(fw_printenv -n active)"
 		if [ "$active" -eq "1" ]; then
@@ -260,3 +265,11 @@ platform_do_upgrade() {
 		;;
 	esac
 }
+
+platform_copy_config() {
+	case "$(board_name)" in
+	spectrum,sax1v1k)
+		emmc_copy_config
+		;;
+	esac
+}