linux: use packages kmod-hci-uart and kmod-btusb instead of kmod-bluetooth

Use Bluetooth UART and USB packages separetly.

Signed-off-by: Paweł Owoc <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/15118
Signed-off-by: Hauke Mehrtens <[email protected]>

target/linux/bcm53xx/image/Makefile

@@ -398,7 +398,7 @@ TARGET_DEVICES += meraki_mr26
 define Device/meraki_mr32
   DEVICE_VENDOR := Meraki
   DEVICE_MODEL := MR32
-  DEVICE_PACKAGES := $(B43) kmod-leds-pwm kmod-hwmon-ina2xx kmod-bluetooth
+  DEVICE_PACKAGES := $(B43) kmod-leds-pwm kmod-hwmon-ina2xx kmod-hci-uart
   DEVICE_DTS := bcm53016-meraki-mr32
 # Meraki FW r23 tries to resize the part.safe partition before it will
 # flash the image. This is a bit of a problem, since resizing will fail

target/linux/ipq40xx/image/generic.mk

@@ -739,7 +739,7 @@ define Device/linksys_whw03
 	IMAGE_SIZE := 131072k
 	IMAGES += factory.bin
 	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | linksys-image type=WHW03
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-leds-pca963x kmod-spi-dev kmod-bluetooth \
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-leds-pca963x kmod-spi-dev kmod-hci-uart \
 		kmod-fs-ext4 e2fsprogs kmod-fs-f2fs mkf2fs losetup ipq-wifi-linksys_whw03
 endef
 TARGET_DEVICES += linksys_whw03
@@ -758,7 +758,7 @@ define Device/linksys_whw03v2
 	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 	IMAGES += factory.bin
 	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-leds-pca963x kmod-spi-dev kmod-hci-uart
 endef
 TARGET_DEVICES += linksys_whw03v2
 
@@ -1127,7 +1127,7 @@ define Device/teltonika_rutx10
 	PAGESIZE := 2048
 	FILESYSTEMS := squashfs
 	IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
-	DEVICE_PACKAGES := kmod-bluetooth
+	DEVICE_PACKAGES := kmod-btusb
 endef
 # Missing DSA Setup
 #TARGET_DEVICES += teltonika_rutx10

target/linux/qualcommax/image/ipq807x.mk

@@ -208,7 +208,7 @@ define Device/linksys_mx4200v1
 	$(call Device/linksys_mx4x00)
 	DEVICE_MODEL := MX4200
 	DEVICE_VARIANT := v1
-	DEVICE_PACKAGES += kmod-bluetooth
+	DEVICE_PACKAGES += kmod-hci-uart
 endef
 TARGET_DEVICES += linksys_mx4200v1
 
@@ -241,7 +241,7 @@ define Device/linksys_mx8500
 	$(call Device/linksys_mx)
 	DEVICE_MODEL := MX8500
 	DEVICE_PACKAGES += ipq-wifi-linksys_mx8500 kmod-ath11k-pci \
-		ath11k-firmware-qcn9074 kmod-bluetooth
+		ath11k-firmware-qcn9074 kmod-hci-uart
 endef
 TARGET_DEVICES += linksys_mx8500
 
@@ -507,6 +507,6 @@ define Device/zyxel_nbg7815
 	DEVICE_DTS_CONFIG := config@nbg7815
 	SOC := ipq8074
 	DEVICE_PACKAGES := kmod-fs-f2fs f2fs-tools ipq-wifi-zyxel_nbg7815 kmod-ath11k-pci \
-		kmod-bluetooth kmod-hwmon-tmp103
+		kmod-hci-uart kmod-hwmon-tmp103
 endef
 TARGET_DEVICES += zyxel_nbg7815