mac80211: brcmsmac: remove initial support for core rev 28

To add support for core rev 28 there are a lot more changes needed.

SVN-Revision: 36477

package/mac80211/patches/850-brcmsmac-start-adding-support-for-core-rev-28.patch

@@ -1,75 +0,0 @@
---- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
-+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
-@@ -101,6 +101,7 @@ static struct bcma_device_id brcms_corei
- 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 17, BCMA_ANY_CLASS),
- 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 23, BCMA_ANY_CLASS),
- 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 24, BCMA_ANY_CLASS),
-+//	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 28, BCMA_ANY_CLASS),
- 	BCMA_CORETABLE_END
- };
- MODULE_DEVICE_TABLE(bcma, brcms_coreid_table);
---- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
-+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
-@@ -722,7 +722,7 @@ static void brcms_c_ucode_bsinit(struct 
- 	brcms_c_write_mhf(wlc_hw, wlc_hw->band->mhfs);
- 
- 	/* do band-specific ucode IHR, SHM, and SCR inits */
--	if (D11REV_IS(wlc_hw->corerev, 17) || D11REV_IS(wlc_hw->corerev, 23)) {
-+	if (D11REV_IS(wlc_hw->corerev, 17) || D11REV_IS(wlc_hw->corerev, 23) || D11REV_IS(wlc_hw->corerev, 28)) {
- 		if (BRCMS_ISNPHY(wlc_hw->band))
- 			brcms_c_write_inits(wlc_hw, ucode->d11n0bsinitvals16);
- 		else
-@@ -2288,7 +2288,7 @@ static void brcms_ucode_download(struct 
- 	if (wlc_hw->ucode_loaded)
- 		return;
- 
--	if (D11REV_IS(wlc_hw->corerev, 17) || D11REV_IS(wlc_hw->corerev, 23)) {
-+	if (D11REV_IS(wlc_hw->corerev, 17) || D11REV_IS(wlc_hw->corerev, 23) || D11REV_IS(wlc_hw->corerev, 28)) {
- 		if (BRCMS_ISNPHY(wlc_hw->band)) {
- 			brcms_ucode_write(wlc_hw, ucode->bcm43xx_16_mimo,
- 					  ucode->bcm43xx_16_mimosz);
-@@ -3231,7 +3231,7 @@ static void brcms_b_coreinit(struct brcm
- 
- 	sflags = bcma_aread32(core, BCMA_IOST);
- 
--	if (D11REV_IS(wlc_hw->corerev, 17) || D11REV_IS(wlc_hw->corerev, 23)) {
-+	if (D11REV_IS(wlc_hw->corerev, 17) || D11REV_IS(wlc_hw->corerev, 23) || D11REV_IS(wlc_hw->corerev, 28)) {
- 		if (BRCMS_ISNPHY(wlc_hw->band))
- 			brcms_c_write_inits(wlc_hw, ucode->d11n0initvals16);
- 		else
-@@ -5723,6 +5723,8 @@ static bool brcms_c_chipmatch_soc(struct
- 
- 	if (chipinfo->id == BCMA_CHIP_ID_BCM4716)
- 		return true;
-+	if (chipinfo->id == BCMA_CHIP_ID_BCM5357)
-+		return true;
- 
- 	pr_err("unknown chip id %04x\n", chipinfo->id);
- 	return false;
---- a/drivers/net/wireless/brcm80211/brcmsmac/main.h
-+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.h
-@@ -65,7 +65,7 @@
- #define	SW_TIMER_MAC_STAT_UPD		30	/* periodic MAC stats update */
- 
- /* max # supported core revisions (0 .. MAXCOREREV - 1) */
--#define	MAXCOREREV		28
-+#define	MAXCOREREV		29
- 
- /* Double check that unsupported cores are not enabled */
- #if CONF_MSK(D11CONF, 0x4f) || CONF_GE(D11CONF, MAXCOREREV)
---- a/drivers/net/wireless/brcm80211/brcmsmac/types.h
-+++ b/drivers/net/wireless/brcm80211/brcmsmac/types.h
-@@ -93,11 +93,11 @@
- #define BOARD_GPIO_13		0x2000
- 
- /* **** Core type/rev defaults **** */
--#define D11CONF		0x0fffffb0	/* Supported  D11 revs: 4, 5, 7-27
-+#define D11CONF		0x1fffffb0	/* Supported  D11 revs: 4, 5, 7-27
- 					 * also need to update wlc.h MAXCOREREV
- 					 */
- 
--#define NCONF		0x000001ff	/* Supported nphy revs:
-+#define NCONF		0x000002ff	/* Supported nphy revs:
- 					 *      0       4321a0
- 					 *      1       4321a1
- 					 *      2       4321b0/b1/c0/c1