ar71xx: rb91x-nand: rewrite to use GPIO API

Rewrite tha rb91x-nand driver to use GPIO API to
modify the NAND control lines.

Signed-off-by: Gabor Juhos <[email protected]>

SVN-Revision: 39700

target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c

@@ -23,6 +23,7 @@
 #include <linux/routerboot.h>
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-latch.h>
+#include <linux/platform_data/rb91x_nand.h>
 
 #include <asm/prom.h>
 #include <asm/mach-ath79/ath79.h>
@@ -54,6 +55,14 @@
 #define RB91X_LATCH_GPIO_BASE	AR934X_GPIO_COUNT
 #define RB91X_LATCH_GPIO(_x)	(RB91X_LATCH_GPIO_BASE + (_x))
 
+#define RB91X_GPIO_NAND_READ	RB91X_LATCH_GPIO(3)
+#define RB91X_GPIO_NAND_RDY	RB91X_LATCH_GPIO(4)
+#define RB91X_GPIO_NLE		RB91X_LATCH_GPIO(11)
+#define RB91X_GPIO_NAND_NRW	RB91X_LATCH_GPIO(12)
+#define RB91X_GPIO_NAND_NCE	RB91X_LATCH_GPIO(13)
+#define RB91X_GPIO_NAND_CLE	RB91X_LATCH_GPIO(14)
+#define RB91X_GPIO_NAND_ALE	RB91X_LATCH_GPIO(15)
+
 struct rb_board_info {
 	const char *name;
 	u32 flags;
@@ -97,6 +106,16 @@ static struct gpio_latch_platform_data rb711gr100_gpio_latch_data __initdata = {
 	.le_active_low = true,
 };
 
+static struct rb91x_nand_platform_data rb711gr100_nand_data __initdata = {
+	.gpio_nce = RB91X_GPIO_NAND_NCE,
+	.gpio_ale = RB91X_GPIO_NAND_ALE,
+	.gpio_cle = RB91X_GPIO_NAND_CLE,
+	.gpio_rdy = RB91X_GPIO_NAND_RDY,
+	.gpio_read = RB91X_GPIO_NAND_READ,
+	.gpio_nrw = RB91X_GPIO_NAND_NRW,
+	.gpio_nle = RB91X_GPIO_NLE,
+};
+
 static void __init rb711gr100_init_partitions(const struct rb_info *info)
 {
 	rb711gr100_spi_partitions[0].size = info->hard_cfg_offs;
@@ -179,7 +198,9 @@ static void __init rb711gr100_setup(void)
 
 	rb711gr100_wlan_init();
 
-	platform_device_register_simple("rb91x-nand", -1, NULL, 0);
+	platform_device_register_data(NULL, "rb91x-nand", -1,
+				      &rb711gr100_nand_data,
+				      sizeof(rb711gr100_nand_data));
 
 	platform_device_register_data(NULL, "gpio-latch", -1,
 				      &rb711gr100_gpio_latch_data,

target/linux/ar71xx/files/drivers/mtd/nand/rb91x_nand.c

@@ -1,7 +1,7 @@
 /*
  *  NAND flash driver for the MikroTik RouterBOARD 91x series
  *
- *  Copyright (C) 2013 Gabor Juhos <[email protected]>
+ *  Copyright (C) 2013-2014 Gabor Juhos <[email protected]>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
@@ -17,35 +17,38 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/rb91x_nand.h>
 
 #include <asm/mach-ath79/ar71xx_regs.h>
 #include <asm/mach-ath79/ath79.h>
 
-#define DRV_NAME	"rb91x-nand"
 #define DRV_DESC	"NAND flash driver for the RouterBOARD 91x series"
 
-#define RB91X_NAND_NRE_ENABLE	BIT(3)
-#define RB91X_NAND_RDY		BIT(4)
-#define RB91X_LATCH_ENABLE	BIT(11)
 #define RB91X_NAND_NRWE		BIT(12)
-#define RB91X_NAND_NCE		BIT(13)
-#define RB91X_NAND_CLE		BIT(14)
-#define RB91X_NAND_ALE		BIT(15)
 
 #define RB91X_NAND_DATA_BITS	(BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) |\
 				 BIT(13) | BIT(14) | BIT(15))
 
 #define RB91X_NAND_INPUT_BITS	(RB91X_NAND_DATA_BITS | RB91X_NAND_RDY)
-#define RB91X_NAND_OUTPUT_BITS	\
-	(RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE)
+#define RB91X_NAND_OUTPUT_BITS	(RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE)
 
 #define RB91X_NAND_LOW_DATA_MASK	0x1f
 #define RB91X_NAND_HIGH_DATA_MASK	0xe0
 #define RB91X_NAND_HIGH_DATA_SHIFT	8
 
 struct rb91x_nand_info {
-	struct nand_chip	chip;
-	struct mtd_info		mtd;
+	struct nand_chip chip;
+	struct mtd_info mtd;
+	struct device *dev;
+
+	int gpio_nce;
+	int gpio_ale;
+	int gpio_cle;
+	int gpio_rdy;
+	int gpio_read;
+	int gpio_nrw;
+	int gpio_nle;
 };
 
 static inline struct rb91x_nand_info *mtd_to_rbinfo(struct mtd_info *mtd)
@@ -81,53 +84,9 @@ static struct mtd_partition rb91x_nand_partitions[] = {
 	},
 };
 
-static void rb91x_change_gpo(u32 clear, u32 set)
-{
-	void __iomem *base = ath79_gpio_base;
-	static unsigned on = 0xE002800;
-	static unsigned off = 0x0000C008;
-	static unsigned oe = 0;
-	static DEFINE_SPINLOCK(lock);
-	unsigned long flags;
-
-	spin_lock_irqsave(&lock, flags);
-
-	on = (on | set) & ~clear;
-	off = (off | clear) & ~set;
-
-	if (!oe)
-		oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
-
-	if (on & RB91X_LATCH_ENABLE) {
-		u32 t;
-
-		t = oe & __raw_readl(base + AR71XX_GPIO_REG_OE);
-		t &= ~(on | off);
-		__raw_writel(t, base + AR71XX_GPIO_REG_OE);
-		__raw_writel(off, base + AR71XX_GPIO_REG_CLEAR);
-		__raw_writel(on, base + AR71XX_GPIO_REG_SET);
-	} else if (clear & RB91X_LATCH_ENABLE) {
-		oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
-		__raw_writel(RB91X_LATCH_ENABLE,
-			     base + AR71XX_GPIO_REG_CLEAR);
-		/* flush write */
-		__raw_readl(base + AR71XX_GPIO_REG_CLEAR);
-	}
-
-	spin_unlock_irqrestore(&lock, flags);
-}
-
-static inline void rb91x_latch_enable(void)
-{
-	rb91x_change_gpo(RB91X_LATCH_ENABLE, 0);
-}
-
-static inline void rb91x_latch_disable(void)
-{
-	rb91x_change_gpo(0, RB91X_LATCH_ENABLE);
-}
-
-static void rb91x_nand_write(const u8 *buf, unsigned len)
+static void rb91x_nand_write(struct rb91x_nand_info *rbni,
+			     const u8 *buf,
+			     unsigned len)
 {
 	void __iomem *base = ath79_gpio_base;
 	u32 oe_reg;
@@ -135,7 +94,8 @@ static void rb91x_nand_write(const u8 *buf, unsigned len)
 	u32 out;
 	unsigned i;
 
-	rb91x_latch_enable();
+	/* enable the latch */
+	gpio_set_value_cansleep(rbni->gpio_nle, 0);
 
 	oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
 	out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
@@ -162,30 +122,32 @@ static void rb91x_nand_write(const u8 *buf, unsigned len)
 	}
 
 	/* restore  registers */
-	__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
 	__raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
+	__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
 	/* flush write */
 	__raw_readl(base + AR71XX_GPIO_REG_OUT);
 
-	rb91x_latch_disable();
+	/* disable the latch */
+	gpio_set_value_cansleep(rbni->gpio_nle, 1);
 }
 
-static void rb91x_nand_read(u8 *read_buf, unsigned len)
+static void rb91x_nand_read(struct rb91x_nand_info *rbni,
+			    u8 *read_buf,
+			    unsigned len)
 {
 	void __iomem *base = ath79_gpio_base;
 	u32 oe_reg;
 	u32 out_reg;
 	unsigned i;
 
-	/* save registers */
-	oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
-
-	/* select nRE mode */
-	rb91x_change_gpo(0, RB91X_NAND_NRE_ENABLE);
+	/* enable read mode */
+	gpio_set_value_cansleep(rbni->gpio_read, 1);
 
 	/* enable latch */
-	rb91x_latch_enable();
+	gpio_set_value_cansleep(rbni->gpio_nle, 0);
 
+	/* save registers */
+	oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
 	out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
 
 	/* set data lines to input mode */
@@ -215,109 +177,169 @@ static void rb91x_nand_read(u8 *read_buf, unsigned len)
 	}
 
 	/* restore  registers */
-	__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
 	__raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
+	__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
 	/* flush write */
 	__raw_readl(base + AR71XX_GPIO_REG_OUT);
 
 	/* disable latch */
-	rb91x_latch_disable();
+	gpio_set_value_cansleep(rbni->gpio_nle, 1);
 
-	/* deselect nRE mode */
-	rb91x_change_gpo(RB91X_NAND_NRE_ENABLE, 0);
+	/* disable read mode */
+	gpio_set_value_cansleep(rbni->gpio_read, 0);
 }
 
 static int rb91x_nand_dev_ready(struct mtd_info *mtd)
 {
-	void __iomem *base = ath79_gpio_base;
+	struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
 
-	return !!(__raw_readl(base + AR71XX_GPIO_REG_IN) & RB91X_NAND_RDY);
+	return gpio_get_value_cansleep(rbni->gpio_rdy);
 }
 
 static void rb91x_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 				unsigned int ctrl)
 {
-	if (ctrl & NAND_CTRL_CHANGE) {
-		u32 on = 0;
-		u32 off;
-
-		if (!(ctrl & NAND_NCE))
-			on |= RB91X_NAND_NCE;
-
-		if (ctrl & NAND_CLE)
-			on |= RB91X_NAND_CLE;
-
-		if (ctrl & NAND_ALE)
-			on |= RB91X_NAND_ALE;
+	struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
 
-		off = on ^ (RB91X_NAND_ALE | RB91X_NAND_NCE | RB91X_NAND_CLE);
-		rb91x_change_gpo(off, on);
+	if (ctrl & NAND_CTRL_CHANGE) {
+		gpio_set_value_cansleep(rbni->gpio_cle,
+					(ctrl & NAND_CLE) ? 1 : 0);
+		gpio_set_value_cansleep(rbni->gpio_ale,
+					(ctrl & NAND_ALE) ? 1 : 0);
+		gpio_set_value_cansleep(rbni->gpio_nce,
+					(ctrl & NAND_NCE) ? 0 : 1);
 	}
 
 	if (cmd != NAND_CMD_NONE) {
 		u8 t = cmd;
 
-		rb91x_nand_write(&t, 1);
+		rb91x_nand_write(rbni, &t, 1);
 	}
 }
 
 static u8 rb91x_nand_read_byte(struct mtd_info *mtd)
 {
+	struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
 	u8 data = 0xff;
 
-	rb91x_nand_read(&data, 1);
+	rb91x_nand_read(rbni, &data, 1);
 
 	return data;
 }
 
 static void rb91x_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 {
-	rb91x_nand_read(buf, len);
+	struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
+
+	rb91x_nand_read(rbni, buf, len);
 }
 
 static void rb91x_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
 {
-	rb91x_nand_write(buf, len);
+	struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
+
+	rb91x_nand_write(rbni, buf, len);
+}
+
+static int rb91x_nand_gpio_init(struct rb91x_nand_info *info)
+{
+	int ret;
+
+	/*
+	 * Ensure that the LATCH is disabled before initializing
+	 * control lines.
+	 */
+	ret = devm_gpio_request_one(info->dev, info->gpio_nle,
+				    GPIOF_OUT_INIT_HIGH, "LATCH enable");
+	if (ret)
+		return ret;
+
+	ret = devm_gpio_request_one(info->dev, info->gpio_nce,
+				    GPIOF_OUT_INIT_HIGH, "NAND nCE");
+	if (ret)
+		return ret;
+
+	ret = devm_gpio_request_one(info->dev, info->gpio_nrw,
+				    GPIOF_OUT_INIT_HIGH, "NAND nRW");
+	if (ret)
+		return ret;
+
+	ret = devm_gpio_request_one(info->dev, info->gpio_cle,
+				    GPIOF_OUT_INIT_LOW, "NAND CLE");
+	if (ret)
+		return ret;
+
+	ret = devm_gpio_request_one(info->dev, info->gpio_ale,
+				    GPIOF_OUT_INIT_LOW, "NAND ALE");
+	if (ret)
+		return ret;
+
+	ret = devm_gpio_request_one(info->dev, info->gpio_read,
+				    GPIOF_OUT_INIT_LOW, "NAND READ");
+	if (ret)
+		return ret;
+
+	ret = devm_gpio_request_one(info->dev, info->gpio_rdy,
+				    GPIOF_IN, "NAND RDY");
+	return ret;
 }
 
 static int rb91x_nand_probe(struct platform_device *pdev)
 {
-	struct rb91x_nand_info	*info;
+	struct rb91x_nand_info	*rbni;
+	struct rb91x_nand_platform_data *pdata;
 	int ret;
 
 	pr_info(DRV_DESC "\n");
 
-	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
-	if (!info)
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata)
+		return -EINVAL;
+
+	rbni = devm_kzalloc(&pdev->dev, sizeof(*rbni), GFP_KERNEL);
+	if (!rbni)
 		return -ENOMEM;
 
-	info->chip.priv	= &info;
-	info->mtd.priv	= &info->chip;
-	info->mtd.owner	= THIS_MODULE;
+	rbni->dev = &pdev->dev;
+	rbni->gpio_nce = pdata->gpio_nce;
+	rbni->gpio_ale = pdata->gpio_ale;
+	rbni->gpio_cle = pdata->gpio_cle;
+	rbni->gpio_read = pdata->gpio_read;
+	rbni->gpio_nrw = pdata->gpio_nrw;
+	rbni->gpio_rdy = pdata->gpio_rdy;
+	rbni->gpio_nle = pdata->gpio_nle;
 
-	info->chip.cmd_ctrl	= rb91x_nand_cmd_ctrl;
-	info->chip.dev_ready	= rb91x_nand_dev_ready;
-	info->chip.read_byte	= rb91x_nand_read_byte;
-	info->chip.write_buf	= rb91x_nand_write_buf;
-	info->chip.read_buf	= rb91x_nand_read_buf;
+	rbni->chip.priv	= &rbni;
+	rbni->mtd.priv	= &rbni->chip;
+	rbni->mtd.owner	= THIS_MODULE;
 
-	info->chip.chip_delay	= 25;
-	info->chip.ecc.mode	= NAND_ECC_SOFT;
+	rbni->chip.cmd_ctrl	= rb91x_nand_cmd_ctrl;
+	rbni->chip.dev_ready	= rb91x_nand_dev_ready;
+	rbni->chip.read_byte	= rb91x_nand_read_byte;
+	rbni->chip.write_buf	= rb91x_nand_write_buf;
+	rbni->chip.read_buf	= rb91x_nand_read_buf;
 
-	platform_set_drvdata(pdev, info);
+	rbni->chip.chip_delay	= 25;
+	rbni->chip.ecc.mode	= NAND_ECC_SOFT;
 
-	ret = nand_scan_ident(&info->mtd, 1, NULL);
+	platform_set_drvdata(pdev, rbni);
+
+	ret = rb91x_nand_gpio_init(rbni);
 	if (ret)
 		return ret;
 
-	if (info->mtd.writesize == 512)
-		info->chip.ecc.layout = &rb91x_nand_ecclayout;
+	ret = nand_scan_ident(&rbni->mtd, 1, NULL);
+	if (ret)
+		return ret;
+
+	if (rbni->mtd.writesize == 512)
+		rbni->chip.ecc.layout = &rb91x_nand_ecclayout;
 
-	ret = nand_scan_tail(&info->mtd);
+	ret = nand_scan_tail(&rbni->mtd);
 	if (ret)
 		return ret;
 
-	ret = mtd_device_register(&info->mtd, rb91x_nand_partitions,
+	ret = mtd_device_register(&rbni->mtd, rb91x_nand_partitions,
 				 ARRAY_SIZE(rb91x_nand_partitions));
 	if (ret)
 		goto err_release_nand;
@@ -325,7 +347,7 @@ static int rb91x_nand_probe(struct platform_device *pdev)
 	return 0;
 
 err_release_nand:
-	nand_release(&info->mtd);
+	nand_release(&rbni->mtd);
 	return ret;
 }
 
@@ -342,7 +364,7 @@ static struct platform_driver rb91x_nand_driver = {
 	.probe	= rb91x_nand_probe,
 	.remove	= rb91x_nand_remove,
 	.driver	= {
-		.name	= DRV_NAME,
+		.name	= RB91X_NAND_DRIVER_NAME,
 		.owner	= THIS_MODULE,
 	},
 };

target/linux/ar71xx/files/include/linux/platform_data/rb91x_nand.h

@@ -0,0 +1,16 @@
+#ifndef _RB91X_NAND_H_
+#define _RB91X_NAND_H_
+
+#define RB91X_NAND_DRIVER_NAME	"rb91x-nand"
+
+struct rb91x_nand_platform_data {
+	int gpio_nce;	/* chip enable, active low */
+	int gpio_ale;	/* address latch enable */
+	int gpio_cle;   /* command latch enable */
+	int gpio_rdy;
+	int gpio_read;
+	int gpio_nrw;	/* read/write enable, active low */
+	int gpio_nle;	/* latch enable, active low */
+};
+
+#endif /* _RB91X_NAND_H_ */