mpc85xx: replace WDR4900 uci-defaults ethernet MAC address hack with DTS entry

This also changes the MAC address to one of the adresses actually used by the
stock firmware on one of the ethernet interfaces.

Signed-off-by: Matthias Schiffer <[email protected]>

SVN-Revision: 45599

target/linux/mpc85xx/base-files/etc/uci-defaults/02_network

@@ -20,8 +20,6 @@ tl-wdr4900-v1)
 	ucidef_add_switch "switch0" "1" "1"
 	ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
 	ucidef_add_switch_vlan "switch0" "2" "0t 1"
-	ucidef_set_interface_macaddr lan "$(mtd_get_mac_binary config 338)"
-	ucidef_set_interface_macaddr wan "$(mtd_get_mac_binary config 344)"
 	;;
 *)
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"

target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts

@@ -63,7 +63,7 @@
 					label = "rootfs";
 				};
 
-				config@fe0000 {
+				config: config@fe0000 {
 					reg = <0x00fe0000 0x00010000>;
 					label = "config";
 					read-only;
@@ -118,6 +118,7 @@
 		enet0: ethernet@b0000 {
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
+			mtd-mac-address = <&config 0x14c>;
 		};
 
 		enet1: ethernet@b1000 {