kirkwood: rework Linksys EA[34]500 DTS

- Use board engineering names rather than marketing names

- Linksys uses a dual firmware layout, where the bootloader
  will switch to the other stored image when one fails to
  boot three consecutive times.

  In order to make this firmware compatible with the factory
  images and the stock bootloader we must match this layout.

Signed-off-by: Claudio Leite <[email protected]>

SVN-Revision: 47429

package/boot/uboot-envtools/files/kirkwood

@@ -15,7 +15,7 @@ board=$(kirkwood_board_name)
 
 case "$board" in
 "ea3500")
-	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x4000" "0x20000"
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x4000" "0x4000"
 	;;
 "ea4500" | \
 "guruplug-server-plus" | \

target/linux/kirkwood/patches-3.18/160-ea4500.patch

@@ -1,18 +1,18 @@
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -120,6 +120,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
- 	kirkwood-ds411.dtb \
- 	kirkwood-ds411j.dtb \
- 	kirkwood-ds411slim.dtb \
-+	kirkwood-ea4500.dtb \
- 	kirkwood-goflexnet.dtb \
- 	kirkwood-guruplug-server-plus.dtb \
- 	kirkwood-ib62x0.dtb \
+@@ -128,6 +128,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
+ 	kirkwood-is2.dtb \
+ 	kirkwood-km_kirkwood.dtb \
+ 	kirkwood-laplug.dtb \
++	kirkwood-linksys-viper.dtb \
+ 	kirkwood-lschlv2.dtb \
+ 	kirkwood-lsxhl.dtb \
+ 	kirkwood-mplcec4.dtb \
 --- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-ea4500.dts
-@@ -0,0 +1,167 @@
++++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+@@ -0,0 +1,187 @@
 +/*
-+ * kirkwood-ea4500.dts - Device Tree file for Linksys EA4500
++ * kirkwood-linksys-viper.dts - Device Tree file for Linksys E4200v2/EA4500
 + *
 + * (c) 2013 Jonas Gorski <[email protected]>
 + * (c) 2013 Deutsche Telekom Innovation Laboratories
@@ -29,8 +29,8 @@
 +#include "kirkwood-6282.dtsi"
 +
 +/ {
-+	model = "Linksys EA4500";
-+	compatible = "linksys,ea4500", "marvell,kirkwood-88f6282", "marvell,kirkwood";
++	model = "Linksys E4200v2 / EA4500";
++	compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
 +
 +	memory {
 +		device_type = "memory";
@@ -111,12 +111,12 @@
 +		pinctrl-names = "default";
 +
 +		white-health {
-+			label = "ea4500:white:health";
++			label = "viper:white:health";
 +			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 +		};
 +
 +		white-pulse {
-+			label = "ea4500:white:pulse";
++			label = "viper:white:pulse";
 +			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 +		};
 +	};
@@ -140,22 +140,42 @@
 +
 +	partition@0 {
 +		label = "u-boot";
-+		reg = <0x0000000 0x80000>;
++		reg = <0x0 0x80000>;
 +	};
 +
 +	partition@80000 {
-+		label = "u-boot environment";
++		label = "u_env";
 +		reg = <0x80000 0x20000>;
 +	};
 +
++	partition@a0000 {
++		label = "s_env";
++		reg = <0xa0000 0x20000>;
++	};
++
 +	partition@200000 {
-+		label = "kernel";
-+		reg = <0x200000 0x200000>;
++		label = "kernel1";
++		reg = <0x200000 0x1a00000>;
++	};
++
++	partition@4a0000 {
++		label = "rootfs1";
++		reg = <0x4a0000 0x1760000>;
++	};
++
++	partition@1c00000 {
++		label = "kernel2";
++		reg = <0x1c00000 0x1a00000>;
++	};
++
++	partition@1ea0000 {
++		label = "rootfs2";
++		reg = <0x1ea0000 0x1760000>;
 +	};
 +
-+	partition@400000 {
-+		label = "root";
-+		reg = <0x400000 0x1c00000>;
++	partition@3600000 {
++		label = "syscfg";
++		reg = <0x3600000 0x4a00000>;
 +	};
 +};
 +

target/linux/kirkwood/patches-3.18/170-ea3500.patch

@@ -1,18 +1,18 @@
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -120,6 +120,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
- 	kirkwood-ds411.dtb \
- 	kirkwood-ds411j.dtb \
- 	kirkwood-ds411slim.dtb \
-+	kirkwood-ea3500.dtb \
- 	kirkwood-ea4500.dtb \
- 	kirkwood-goflexnet.dtb \
- 	kirkwood-guruplug-server-plus.dtb \
+@@ -128,6 +128,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
+ 	kirkwood-is2.dtb \
+ 	kirkwood-km_kirkwood.dtb \
+ 	kirkwood-laplug.dtb \
++	kirkwood-linksys-audi.dtb \
+ 	kirkwood-linksys-viper.dtb \
+ 	kirkwood-lschlv2.dtb \
+ 	kirkwood-lsxhl.dtb \
 --- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-ea3500.dts
-@@ -0,0 +1,160 @@
++++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
+@@ -0,0 +1,179 @@
 +/*
-+ * kirkwood-ea3500.dts - Device Tree file for Linksys EA3500
++ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
 + *
 + * (c) 2013 Jonas Gorski <[email protected]>
 + * (c) 2013 Deutsche Telekom Innovation Laboratories
@@ -31,7 +31,7 @@
 +
 +/ {
 +	model = "Linksys EA3500";
-+	compatible = "linksys,ea3500", "marvell,kirkwood-88f6282", "marvell,kirkwood";
++	compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
 +
 +	memory {
 +		device_type = "memory";
@@ -108,7 +108,7 @@
 +		pinctrl-names = "default";
 +
 +		green-power {
-+			label = "ea3500:green:power";
++			label = "audi:green:power";
 +			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 +		};
 +	};
@@ -132,23 +132,42 @@
 +
 +	partition@0 {
 +		label = "u-boot";
-+		reg = <0x0000000 0x80000>;
-+		read-only;
++		reg = <0x0 0x80000>;
 +	};
 +
 +	partition@80000 {
-+		label = "u-boot environment";
-+		reg = <0x80000 0x20000>;
++		label = "u_env";
++		reg = <0x80000 0x4000>;
++	};
++
++	partition@84000 {
++		label = "s_env";
++		reg = <0x84000 0x4000>;
 +	};
 +
 +	partition@200000 {
-+		label = "kernel";
-+		reg = <0x200000 0x200000>;
++		label = "kernel1";
++		reg = <0x200000 0x1400000>;
++	};
++
++	partition@490000 {
++		label = "rootfs1";
++		reg = <0x490000 0x1170000>;
++	};
++
++	partition@1600000 {
++		label = "kernel2";
++		reg = <0x1600000 0x1400000>;
++	};
++
++	partition@1890000 {
++		label = "rootfs2";
++		reg = <0x1890000 0x1170000>;
 +	};
 +
-+	partition@400000 {
-+		label = "root";
-+		reg = <0x400000 0x1200000>;
++	partition@2a00000 {
++		label = "syscfg";
++		reg = <0x2a00000  0x1600000>;
 +	};
 +};
 +

target/linux/kirkwood/patches-3.18/180-goflexhome.patch

@@ -1,9 +1,9 @@
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -122,6 +122,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
+@@ -120,6 +120,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
+ 	kirkwood-ds411.dtb \
+ 	kirkwood-ds411j.dtb \
  	kirkwood-ds411slim.dtb \
- 	kirkwood-ea3500.dtb \
- 	kirkwood-ea4500.dtb \
 +	kirkwood-goflexhome.dtb \
  	kirkwood-goflexnet.dtb \
  	kirkwood-guruplug-server-plus.dtb \

target/linux/kirkwood/patches-4.3/140-ea4500.patch

@@ -1,18 +1,18 @@
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -168,6 +168,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-ds411.dtb \
- 	kirkwood-ds411j.dtb \
- 	kirkwood-ds411slim.dtb \
-+	kirkwood-ea4500.dtb \
- 	kirkwood-goflexnet.dtb \
- 	kirkwood-guruplug-server-plus.dtb \
- 	kirkwood-ib62x0.dtb \
+@@ -176,6 +176,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ 	kirkwood-is2.dtb \
+ 	kirkwood-km_kirkwood.dtb \
+ 	kirkwood-laplug.dtb \
++	kirkwood-linksys-viper.dtb \
+ 	kirkwood-lschlv2.dtb \
+ 	kirkwood-lswvl.dtb \
+ 	kirkwood-lswxl.dtb \
 --- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-ea4500.dts
-@@ -0,0 +1,167 @@
++++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+@@ -0,0 +1,187 @@
 +/*
-+ * kirkwood-ea4500.dts - Device Tree file for Linksys EA4500
++ * kirkwood-linksys-viper.dts - Device Tree file for Linksys EA4500
 + *
 + * (c) 2013 Jonas Gorski <[email protected]>
 + * (c) 2013 Deutsche Telekom Innovation Laboratories
@@ -29,8 +29,8 @@
 +#include "kirkwood-6282.dtsi"
 +
 +/ {
-+	model = "Linksys EA4500";
-+	compatible = "linksys,ea4500", "marvell,kirkwood-88f6282", "marvell,kirkwood";
++	model = "Linksys E4200v2 / EA4500";
++	compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
 +
 +	memory {
 +		device_type = "memory";
@@ -111,12 +111,12 @@
 +		pinctrl-names = "default";
 +
 +		white-health {
-+			label = "ea4500:white:health";
++			label = "viper:white:health";
 +			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 +		};
 +
 +		white-pulse {
-+			label = "ea4500:white:pulse";
++			label = "viper:white:pulse";
 +			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 +		};
 +	};
@@ -140,22 +140,42 @@
 +
 +	partition@0 {
 +		label = "u-boot";
-+		reg = <0x0000000 0x80000>;
++		reg = <0x0 0x80000>;
 +	};
 +
 +	partition@80000 {
-+		label = "u-boot environment";
++		label = "u_env";
 +		reg = <0x80000 0x20000>;
 +	};
 +
++	partition@a0000 {
++		label = "s_env";
++		reg = <0xa0000 0x20000>;
++	};
++
 +	partition@200000 {
-+		label = "kernel";
-+		reg = <0x200000 0x200000>;
++		label = "kernel1";
++		reg = <0x200000 0x1a00000>;
++	};
++
++	partition@4a0000 {
++		label = "rootfs1";
++		reg = <0x4a0000 0x1760000>;
++	};
++
++	partition@1c00000 {
++		label = "kernel2";
++		reg = <0x1c00000 0x1a00000>;
++	};
++
++	partition@1ea0000 {
++		label = "rootfs2";
++		reg = <0x1ea0000 0x1760000>;
 +	};
 +
-+	partition@400000 {
-+		label = "root";
-+		reg = <0x400000 0x1c00000>;
++	partition@3600000 {
++		label = "syscfg";
++		reg = <0x3600000 0x4a00000>;
 +	};
 +};
 +

target/linux/kirkwood/patches-4.3/150-ea3500.patch

@@ -1,18 +1,18 @@
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -168,6 +168,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-ds411.dtb \
- 	kirkwood-ds411j.dtb \
- 	kirkwood-ds411slim.dtb \
-+	kirkwood-ea3500.dtb \
- 	kirkwood-ea4500.dtb \
- 	kirkwood-goflexnet.dtb \
- 	kirkwood-guruplug-server-plus.dtb \
+@@ -176,6 +176,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ 	kirkwood-is2.dtb \
+ 	kirkwood-km_kirkwood.dtb \
+ 	kirkwood-laplug.dtb \
++	kirkwood-linksys-audi.dtb \
+ 	kirkwood-linksys-viper.dtb \
+ 	kirkwood-lschlv2.dtb \
+ 	kirkwood-lswvl.dtb \
 --- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-ea3500.dts
-@@ -0,0 +1,160 @@
++++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
+@@ -0,0 +1,179 @@
 +/*
-+ * kirkwood-ea3500.dts - Device Tree file for Linksys EA3500
++ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
 + *
 + * (c) 2013 Jonas Gorski <[email protected]>
 + * (c) 2013 Deutsche Telekom Innovation Laboratories
@@ -31,7 +31,7 @@
 +
 +/ {
 +	model = "Linksys EA3500";
-+	compatible = "linksys,ea3500", "marvell,kirkwood-88f6282", "marvell,kirkwood";
++	compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
 +
 +	memory {
 +		device_type = "memory";
@@ -108,7 +108,7 @@
 +		pinctrl-names = "default";
 +
 +		green-power {
-+			label = "ea3500:green:power";
++			label = "audi:green:power";
 +			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 +		};
 +	};
@@ -132,23 +132,42 @@
 +
 +	partition@0 {
 +		label = "u-boot";
-+		reg = <0x0000000 0x80000>;
-+		read-only;
++		reg = <0x0 0x80000>;
 +	};
 +
 +	partition@80000 {
-+		label = "u-boot environment";
-+		reg = <0x80000 0x20000>;
++		label = "u_env";
++		reg = <0x80000 0x4000>;
++	};
++
++	partition@84000 {
++		label = "s_env";
++		reg = <0x84000 0x4000>;
 +	};
 +
 +	partition@200000 {
-+		label = "kernel";
-+		reg = <0x200000 0x200000>;
++		label = "kernel1";
++		reg = <0x200000 0x1400000>;
++	};
++
++	partition@490000 {
++		label = "rootfs1";
++		reg = <0x490000 0x1170000>;
++	};
++
++	partition@1600000 {
++		label = "kernel2";
++		reg = <0x1600000 0x1400000>;
++	};
++
++	partition@1890000 {
++		label = "rootfs2";
++		reg = <0x1890000 0x1170000>;
 +	};
 +
-+	partition@400000 {
-+		label = "root";
-+		reg = <0x400000 0x1200000>;
++	partition@2a00000 {
++		label = "syscfg";
++		reg = <0x2a00000  0x1600000>;
 +	};
 +};
 +

target/linux/kirkwood/patches-4.3/160-goflexhome.patch

@@ -1,9 +1,9 @@
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -170,6 +170,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+@@ -168,6 +168,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ 	kirkwood-ds411.dtb \
+ 	kirkwood-ds411j.dtb \
  	kirkwood-ds411slim.dtb \
- 	kirkwood-ea3500.dtb \
- 	kirkwood-ea4500.dtb \
 +	kirkwood-goflexhome.dtb \
  	kirkwood-goflexnet.dtb \
  	kirkwood-guruplug-server-plus.dtb \