ar71xx: Add support for the OMYlink OMY-X1

This patch adds support for the OMYlink OMY-X1

https://wiki.openwrt.org/toh/omylink/omy-x1

http://www.omylink.com/

Signed-off-by: L. D. Pinney <[email protected]>

SVN-Revision: 49026

target/linux/ar71xx/base-files/etc/board.d/01_leds

@@ -394,6 +394,11 @@ om5p-an)
 	ucidef_set_led_netdev "port2" "port2" "om5p:blue:lan" "eth1"
 	;;
 
+omy-x1)
+	ucidef_set_led_default "power" "POWER" "omy:green:power" "1"
+	ucidef_set_led_default "wan" "WAN" "omy:green:wan" "eth0"
+	;;
+
 qihoo-c301)
 	ucidef_set_led_wlan "wlan2g" "WLAN2G" "qihoo:red:status" "phy1tpt"
 	;;

target/linux/ar71xx/base-files/etc/diag.sh

@@ -214,6 +214,9 @@ get_status_led() {
 	om5p-an)
 		status_led="om5p:blue:power"
 		;;
+	omy-x1)
+		status_led="omy:green:power"
+		;;
 	onion-omega)
 		status_led="onion:amber:system"
 		;;

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -123,6 +123,9 @@ tplink_board_detect() {
 	"007260"*)
 		model="TellStick ZNet Lite"
 		;;
+	"066602"*)
+		model="OMYlink OMY-X1"
+		;;
 	"3C0001"*)
 		model="OOLITE"
 		;;
@@ -632,6 +635,9 @@ ar71xx_board_detect() {
 	*"OM5P AN")
 		name="om5p-an"
 		;;
+	*"OMY-X1")
+		name="omy-x1"
+		;;
 	*"Onion Omega")
 		name="onion-omega"
 		;;

target/linux/ar71xx/base-files/lib/upgrade/platform.sh

@@ -333,6 +333,7 @@ platform_check_image() {
 	gl-inet | \
 	mc-mac1200r | \
 	minibox-v1 |\
+	omy-x1 |\
 	onion-omega | \
 	oolite | \
 	smart-300 | \

target/linux/ar71xx/config-4.1

@@ -108,6 +108,7 @@ CONFIG_ATH79_MACH_NBG460N=y
 CONFIG_ATH79_MACH_NBG6716=y
 CONFIG_ATH79_MACH_OM2P=y
 CONFIG_ATH79_MACH_OM5P=y
+CONFIG_ATH79_MACH_OMY_X1=y
 CONFIG_ATH79_MACH_ONION_OMEGA=y
 CONFIG_ATH79_MACH_PB42=y
 CONFIG_ATH79_MACH_PB44=y

target/linux/ar71xx/config-4.4

@@ -111,6 +111,7 @@ CONFIG_ATH79_MACH_NBG460N=y
 CONFIG_ATH79_MACH_NBG6716=y
 CONFIG_ATH79_MACH_OM2P=y
 CONFIG_ATH79_MACH_OM5P=y
+CONFIG_ATH79_MACH_OMY_X1=y
 CONFIG_ATH79_MACH_ONION_OMEGA=y
 CONFIG_ATH79_MACH_PB42=y
 CONFIG_ATH79_MACH_PB44=y

target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt

@@ -853,6 +853,15 @@ config ATH79_MACH_OM5P
 	select ATH79_DEV_M25P80
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_OMY_X1
+	bool "OMYlink OMY X1 support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_ONION_OMEGA
 	bool "ONION OMEGA support"
 	select SOC_AR933X

target/linux/ar71xx/files/arch/mips/ath79/Makefile

@@ -114,6 +114,7 @@ obj-$(CONFIG_ATH79_MACH_MZK_W300NH)	+= mach-mzk-w300nh.o
 obj-$(CONFIG_ATH79_MACH_NBG460N)	+= mach-nbg460n.o
 obj-$(CONFIG_ATH79_MACH_OM2P)		+= mach-om2p.o
 obj-$(CONFIG_ATH79_MACH_OM5P)		+= mach-om5p.o
+obj-$(CONFIG_ATH79_MACH_OMY_X1)		+= mach-omy-x1.o
 obj-$(CONFIG_ATH79_MACH_ONION_OMEGA)  += mach-onion-omega.o
 obj-$(CONFIG_ATH79_MACH_PB42)		+= mach-pb42.o
 obj-$(CONFIG_ATH79_MACH_PB44)		+= mach-pb44.o

target/linux/ar71xx/files/arch/mips/ath79/mach-omy-x1.c

@@ -0,0 +1,106 @@
+/*
+ *  OMYlink OMY-X1 board support
+ *
+ *  Copyright (C) 2016 L. D. Pinney <[email protected]>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+
+
+#define OMY_X1_GPIO_LED_POWER	19
+#define OMY_X1_GPIO_LED_WAN	22
+
+#define OMY_X1_GPIO_BTN_RESET	17
+
+#define OMY_X1_KEYS_POLL_INTERVAL	20	/* msecs */
+#define OMY_X1_KEYS_DEBOUNCE_INTERVAL (3 * OMY_X1_KEYS_POLL_INTERVAL)
+
+static const char *omy_x1_part_probes[] = {
+	"tp-link",
+	NULL,
+};
+
+static struct flash_platform_data omy_x1_flash_data = {
+	.part_probes	= omy_x1_part_probes,
+};
+
+static struct gpio_led omy_x1_leds_gpio[] __initdata = {
+	{
+		.name		= "omy:green:wan",
+		.gpio		= OMY_X1_GPIO_LED_WAN,
+		.active_low	= 1,
+	}, {
+		.name		= "omy:green:power",
+		.gpio		= OMY_X1_GPIO_LED_POWER,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button omy_x1_gpio_keys[] __initdata = {
+	{
+		.desc		= "Reset button",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = OMY_X1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= OMY_X1_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}
+};
+
+static void __init omy_x1_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
+				 AR934X_GPIO_FUNC_CLK_OBS4_EN);
+
+	ath79_register_m25p80(&omy_x1_flash_data);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(omy_x1_leds_gpio),
+				omy_x1_leds_gpio);
+
+	ath79_register_gpio_keys_polled(1, OMY_X1_KEYS_POLL_INTERVAL,
+				ARRAY_SIZE(omy_x1_gpio_keys),
+				omy_x1_gpio_keys);
+
+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
+
+	ath79_register_mdio(1, 0x0);
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
+	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+	ath79_switch_data.phy4_mii_en = 1;
+	ath79_switch_data.phy_poll_mask = BIT(0);
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ath79_eth0_data.phy_mask = BIT(0);
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+	ath79_register_eth(0);
+
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+	ath79_register_eth(1);
+
+	ath79_register_wmac(ee, mac);
+
+}
+
+MIPS_MACHINE(ATH79_MACH_OMY_X1, "OMY-X1", "OMYlink OMY-X1",
+	     omy_x1_setup);

target/linux/ar71xx/files/arch/mips/ath79/machtypes.h

@@ -114,6 +114,7 @@ enum ath79_mach_type {
 	ATH79_MACH_OM2P,		/* OpenMesh OM2P */
 	ATH79_MACH_OM5P_AN,		/* OpenMesh OM5P-AN */
 	ATH79_MACH_OM5P,		/* OpenMesh OM5P */
+	ATH79_MACH_OMY_X1,		/* OMYlink OMY-X1 */
 	ATH79_MACH_ONION_OMEGA,		/* ONION OMEGA */
 	ATH79_MACH_PB42,		/* Atheros PB42 */
 	ATH79_MACH_PB92,		/* Atheros PB92 */

target/linux/ar71xx/generic/profiles/omy.mk

@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/OMYX1
+	NAME:=OMYlink OMY-X1
+	PACKAGES:=
+endef
+
+define Profile/OMYX1/Description
+	Package set optimized for the OMYlink OMY-X1.
+endef
+$(eval $(call Profile,OMYX1))

target/linux/ar71xx/image/Makefile

@@ -531,6 +531,14 @@ define Device/minibox-v1
 endef
 TARGET_DEVICES += minibox-v1
 
+define Device/omy-x1
+    $(Device/tplink-8mlzma)
+    BOARDNAME := OMY-X1
+    DEVICE_PROFILE := OMYX1
+    TPLINK_HWID := 0x06660201
+endef
+TARGET_DEVICES += omy-x1
+
 define Device/onion-omega
     $(Device/tplink-16mlzma)
     BOARDNAME := ONION-OMEGA

tools/firmware-utils/src/mktplinkfw.c

@@ -35,6 +35,7 @@
 #define HWID_ANTMINER_S3	0x04440301
 #define HWID_GL_INET_V1		0x08000001
 #define HWID_GS_OOLITE_V1	0x3C000101
+#define HWID_OMY_X1			0x06660201
 #define HWID_ONION_OMEGA	0x04700001
 #define HWID_TL_MR10U_V1	0x00100101
 #define HWID_TL_MR13U_V1	0x00130101
@@ -429,6 +430,11 @@ static struct board_info boards[] = {
 		.hw_id		= HWID_GS_OOLITE_V1,
 		.hw_rev		= 1,
 		.layout_id	= "16Mlzma",
+	}, {
+		.id		= "OMY-X1",
+		.hw_id		= HWID_OMY_X1,
+		.hw_rev		= 1,
+		.layout_id	= "8Mlzma",
 	}, {
 		.id		= "ONION-OMEGA",
 		.hw_id		= HWID_ONION_OMEGA,