mpc85xx: restructure image receipts

Move the image receipts into separate per-subtarget files like it is
done on most other targets.

Signed-off-by: David Bauer <[email protected]>

target/linux/mpc85xx/image/Makefile

@@ -5,8 +5,6 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
-DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION
-
 define Build/copy-file
 	cat "$(1)" > "$@"
 endef
@@ -21,108 +19,6 @@ define Device/Default
   SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
 endef
 
-ifeq ($(SUBTARGET),p1010)
-
-define Device/tplink_tl-wdr4900-v1
-  DEVICE_VENDOR := TP-Link
-  DEVICE_MODEL := TL-WDR4900
-  DEVICE_VARIANT := v1
-  TPLINK_HEADER_VERSION := 1
-  TPLINK_HWID := 0x49000001
-  TPLINK_HWREV := 1
-  TPLINK_FLASHLAYOUT := 16Mppc
-  KERNEL_SIZE := 2684k
-  KERNEL_NAME := simpleImage.tl-wdr4900-v1
-  KERNEL_INITRAMFS :=
-  KERNEL := kernel-bin | uImage none
-  KERNEL_ENTRY := 0x1000000
-  KERNEL_LOADADDR := 0x1000000
-  SUPPORTED_DEVICES += tl-wdr4900-v1
-  ARTIFACTS := fdt.bin
-  ARTIFACT/fdt.bin := append-dtb
-  IMAGES := fdt.bin factory.bin sysupgrade.bin
-  IMAGE/sysupgrade.bin := tplink-v1-image sysupgrade | append-metadata
-  IMAGE/factory.bin := tplink-v1-image factory
-endef
-TARGET_DEVICES += tplink_tl-wdr4900-v1
-
-define Device/sophos_red-15w-rev1
-  DEVICE_VENDOR := Sophos
-  DEVICE_MODEL := RED 15w
-  DEVICE_VARIANT := Rev.1
-  # Original firmware uses a dedicated DTB-partition.
-  # The bootloader however supports FIT-images.
-  KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
-  IMAGES := sysupgrade.bin
-  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-endef
-TARGET_DEVICES += sophos_red-15w-rev1
-
-endif
-
-ifeq ($(SUBTARGET),p1020)
-
-define Device/aerohive_hiveap-330
-  DEVICE_VENDOR := Aerohive
-  DEVICE_MODEL := HiveAP-330
-  DEVICE_PACKAGES := kmod-tpm-i2c-atmel
-  BLOCKSIZE := 128k
-  KERNEL := kernel-bin | gzip | uImage gzip
-  KERNEL_SIZE := 8m
-  KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs | uImage none
-  IMAGES := fdt.bin sysupgrade.bin
-  IMAGE/fdt.bin := append-dtb
-  IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | check-size 256k | \
-	append-uImage-fakehdr ramdisk | pad-to 256k | check-size 512k | \
-	append-rootfs | pad-rootfs $$(BLOCKSIZE) | pad-to 41216k | check-size 41216k | \
-	append-kernel | append-metadata
-endef
-TARGET_DEVICES += aerohive_hiveap-330
-
-define Device/enterasys_ws-ap3710i
-  DEVICE_VENDOR := Enterasys
-  DEVICE_MODEL := WS-AP3710i
-  BLOCKSIZE := 128k
-  KERNEL = kernel-bin | lzma | fit lzma $(KDIR)/image-$$(DEVICE_DTS).dtb
-  IMAGES := sysupgrade.bin
-  IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += enterasys_ws-ap3710i
-
-define Device/ocedo_panda
-  DEVICE_VENDOR := OCEDO
-  DEVICE_MODEL := Panda
-  DEVICE_PACKAGES := kmod-rtc-ds1307 uboot-envtools
-  KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
-  PAGESIZE := 2048
-  SUBPAGESIZE := 512
-  BLOCKSIZE := 128k
-  IMAGES := fdt.bin sysupgrade.bin
-  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-  IMAGE/fdt.bin := append-dtb
-endef
-TARGET_DEVICES += ocedo_panda
-
-endif
-
-ifeq ($(SUBTARGET),p2020)
-
-define Device/freescale_p2020rdb
-  DEVICE_VENDOR := Freescale
-  DEVICE_MODEL := P2020RDB
-  DEVICE_DTS_DIR := $(DTS_DIR)/fsl
-  DEVICE_PACKAGES := kmod-hwmon-lm90 kmod-rtc-ds1307 \
-	kmod-gpio-pca953x kmod-eeprom-at24
-  BLOCKSIZE := 128k
-  KERNEL := kernel-bin | gzip | \
-	fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
-  SUPPORTED_DEVICES := fsl,P2020RDB
-  IMAGES := sysupgrade.bin
-  IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
-	pad-rootfs $$(BLOCKSIZE) | append-metadata
-endef
-TARGET_DEVICES += freescale_p2020rdb
-
-endif
+include $(SUBTARGET).mk
 
 $(eval $(call BuildImage))

target/linux/mpc85xx/image/p1010.mk

@@ -0,0 +1,36 @@
+DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION
+
+define Device/tplink_tl-wdr4900-v1
+  DEVICE_VENDOR := TP-Link
+  DEVICE_MODEL := TL-WDR4900
+  DEVICE_VARIANT := v1
+  TPLINK_HEADER_VERSION := 1
+  TPLINK_HWID := 0x49000001
+  TPLINK_HWREV := 1
+  TPLINK_FLASHLAYOUT := 16Mppc
+  KERNEL_SIZE := 2684k
+  KERNEL_NAME := simpleImage.tl-wdr4900-v1
+  KERNEL_INITRAMFS :=
+  KERNEL := kernel-bin | uImage none
+  KERNEL_ENTRY := 0x1000000
+  KERNEL_LOADADDR := 0x1000000
+  SUPPORTED_DEVICES += tl-wdr4900-v1
+  ARTIFACTS := fdt.bin
+  ARTIFACT/fdt.bin := append-dtb
+  IMAGES := fdt.bin factory.bin sysupgrade.bin
+  IMAGE/sysupgrade.bin := tplink-v1-image sysupgrade | append-metadata
+  IMAGE/factory.bin := tplink-v1-image factory
+endef
+TARGET_DEVICES += tplink_tl-wdr4900-v1
+
+define Device/sophos_red-15w-rev1
+  DEVICE_VENDOR := Sophos
+  DEVICE_MODEL := RED 15w
+  DEVICE_VARIANT := Rev.1
+  # Original firmware uses a dedicated DTB-partition.
+  # The bootloader however supports FIT-images.
+  KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
+  IMAGES := sysupgrade.bin
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += sophos_red-15w-rev1

target/linux/mpc85xx/image/p1020.mk

@@ -0,0 +1,41 @@
+define Device/aerohive_hiveap-330
+  DEVICE_VENDOR := Aerohive
+  DEVICE_MODEL := HiveAP-330
+  DEVICE_PACKAGES := kmod-tpm-i2c-atmel
+  BLOCKSIZE := 128k
+  KERNEL := kernel-bin | gzip | uImage gzip
+  KERNEL_SIZE := 8m
+  KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs | uImage none
+  IMAGES := fdt.bin sysupgrade.bin
+  IMAGE/fdt.bin := append-dtb
+  IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | check-size 256k | \
+	append-uImage-fakehdr ramdisk | pad-to 256k | check-size 512k | \
+	append-rootfs | pad-rootfs $$(BLOCKSIZE) | pad-to 41216k | check-size 41216k | \
+	append-kernel | append-metadata
+endef
+TARGET_DEVICES += aerohive_hiveap-330
+
+define Device/enterasys_ws-ap3710i
+  DEVICE_VENDOR := Enterasys
+  DEVICE_MODEL := WS-AP3710i
+  BLOCKSIZE := 128k
+  KERNEL = kernel-bin | lzma | fit lzma $(KDIR)/image-$$(DEVICE_DTS).dtb
+  IMAGES := sysupgrade.bin
+  IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += enterasys_ws-ap3710i
+
+define Device/ocedo_panda
+  DEVICE_VENDOR := OCEDO
+  DEVICE_MODEL := Panda
+  DEVICE_PACKAGES := kmod-rtc-ds1307 uboot-envtools
+  KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
+  PAGESIZE := 2048
+  SUBPAGESIZE := 512
+  BLOCKSIZE := 128k
+  IMAGES := fdt.bin sysupgrade.bin
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+  IMAGE/fdt.bin := append-dtb
+endef
+TARGET_DEVICES += ocedo_panda
+

target/linux/mpc85xx/image/p2020.mk

@@ -0,0 +1,15 @@
+define Device/freescale_p2020rdb
+  DEVICE_VENDOR := Freescale
+  DEVICE_MODEL := P2020RDB
+  DEVICE_DTS_DIR := $(DTS_DIR)/fsl
+  DEVICE_PACKAGES := kmod-hwmon-lm90 kmod-rtc-ds1307 \
+	kmod-gpio-pca953x kmod-eeprom-at24
+  BLOCKSIZE := 128k
+  KERNEL := kernel-bin | gzip | \
+	fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  SUPPORTED_DEVICES := fsl,P2020RDB
+  IMAGES := sysupgrade.bin
+  IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
+	pad-rootfs $$(BLOCKSIZE) | append-metadata
+endef
+TARGET_DEVICES += freescale_p2020rdb