brcm63xx: allow bcm963xx and livebox support at the same time

Use the CFE_EPTSEAL to tell them apart at runtime. Added for now only
for the 3.14 until properly tested.

Signed-off-by: Jonas Gorski <[email protected]>

SVN-Revision: 41296

target/linux/brcm63xx/config-3.14

@@ -33,7 +33,7 @@ CONFIG_BCM63XX_OHCI=y
 CONFIG_BCM63XX_PHY=y
 CONFIG_BCM63XX_WDT=y
 CONFIG_BOARD_BCM963XX=y
-# CONFIG_BOARD_LIVEBOX is not set
+CONFIG_BOARD_LIVEBOX=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_CEVT_R4K=y
 CONFIG_CLONE_BACKWARDS=y

target/linux/brcm63xx/patches-3.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch

@@ -0,0 +1,493 @@
+From 5a50cb0d53344a2429831b00925d6183d4d332e1 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <[email protected]>
+Date: Sun, 9 Mar 2014 03:54:05 +0100
+Subject: [PATCH 40/44] MIPS: BCM63XX: move device registration code into its
+ own file
+
+Move device registration code into its own file to allow sharing it
+between board implementations.
+
+Signed-off-by: Jonas Gorski <[email protected]>
+---
+ arch/mips/bcm63xx/boards/Makefile         |   1 +
+ arch/mips/bcm63xx/boards/board_bcm963xx.c | 188 +-------------------------
+ arch/mips/bcm63xx/boards/board_common.c   | 215 ++++++++++++++++++++++++++++++
+ arch/mips/bcm63xx/boards/board_common.h   |   8 ++
+ 4 files changed, 223 insertions(+), 183 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/boards/board_common.c
+ create mode 100644 arch/mips/bcm63xx/boards/board_common.h
+
+--- a/arch/mips/bcm63xx/boards/Makefile
++++ b/arch/mips/bcm63xx/boards/Makefile
+@@ -1 +1,2 @@
++obj-y					+= board_common.o
+ obj-$(CONFIG_BOARD_BCM963XX)		+= board_bcm963xx.o
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -10,35 +10,22 @@
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+ #include <linux/string.h>
+-#include <linux/platform_device.h>
+-#include <linux/ssb/ssb.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+-#include <bcm63xx_dev_uart.h>
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_nvram.h>
+-#include <bcm63xx_dev_pci.h>
+-#include <bcm63xx_dev_enet.h>
+-#include <bcm63xx_dev_dsp.h>
+-#include <bcm63xx_dev_flash.h>
+-#include <bcm63xx_dev_hsspi.h>
+-#include <bcm63xx_dev_pcmcia.h>
+-#include <bcm63xx_dev_spi.h>
+-#include <bcm63xx_dev_usb_ehci.h>
+-#include <bcm63xx_dev_usb_ohci.h>
+-#include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
+ 
++#include "board_common.h"
++
+ #include <uapi/linux/bcm933xx_hcs.h>
+ 
+ #define PFX	"board_bcm963xx: "
+ 
+ #define HCS_OFFSET_128K			0x20000
+ 
+-static struct board_info board;
+-
+ /*
+  * known 3368 boards
+  */
+@@ -711,52 +698,6 @@ static const struct board_info __initcon
+ };
+ 
+ /*
+- * Register a sane SPROMv2 to make the on-board
+- * bcm4318 WLAN work
+- */
+-#ifdef CONFIG_SSB_PCIHOST
+-static struct ssb_sprom bcm63xx_sprom = {
+-	.revision		= 0x02,
+-	.board_rev		= 0x17,
+-	.country_code		= 0x0,
+-	.ant_available_bg	= 0x3,
+-	.pa0b0			= 0x15ae,
+-	.pa0b1			= 0xfa85,
+-	.pa0b2			= 0xfe8d,
+-	.pa1b0			= 0xffff,
+-	.pa1b1			= 0xffff,
+-	.pa1b2			= 0xffff,
+-	.gpio0			= 0xff,
+-	.gpio1			= 0xff,
+-	.gpio2			= 0xff,
+-	.gpio3			= 0xff,
+-	.maxpwr_bg		= 0x004c,
+-	.itssi_bg		= 0x00,
+-	.boardflags_lo		= 0x2848,
+-	.boardflags_hi		= 0x0000,
+-};
+-
+-int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+-{
+-	if (bus->bustype == SSB_BUSTYPE_PCI) {
+-		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
+-		return 0;
+-	} else {
+-		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
+-		return -EINVAL;
+-	}
+-}
+-#endif
+-
+-/*
+- * return board name for /proc/cpuinfo
+- */
+-const char *board_get_name(void)
+-{
+-	return board.name;
+-}
+-
+-/*
+  * early init callback, read nvram data from flash and checksum it
+  */
+ void __init board_prom_init(void)
+@@ -801,141 +742,16 @@ void __init board_prom_init(void)
+ 		if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
+ 			continue;
+ 		/* copy, board desc array is marked initdata */
+-		memcpy(&board, bcm963xx_boards[i], sizeof(board));
++		board_early_setup(bcm963xx_boards[i]);
+ 		break;
+ 	}
+ 
+-	/* bail out if board is not found, will complain later */
+-	if (!board.name[0]) {
++	/* warn if board is not found, will complain later */
++	if (i == ARRAY_SIZE(bcm963xx_boards)) {
+ 		char name[17];
+ 		memcpy(name, board_name, 16);
+ 		name[16] = 0;
+ 		printk(KERN_ERR PFX "unknown bcm963xx board: %s\n",
+ 		       name);
+-		return;
+-	}
+-
+-	/* setup pin multiplexing depending on board enabled device,
+-	 * this has to be done this early since PCI init is done
+-	 * inside arch_initcall */
+-	val = 0;
+-
+-#ifdef CONFIG_PCI
+-	if (board.has_pci) {
+-		bcm63xx_pci_enabled = 1;
+-		if (BCMCPU_IS_6348())
+-			val |= GPIO_MODE_6348_G2_PCI;
+-	}
+-#endif
+-
+-	if (board.has_pccard) {
+-		if (BCMCPU_IS_6348())
+-			val |= GPIO_MODE_6348_G1_MII_PCCARD;
+-	}
+-
+-	if (board.has_enet0 && !board.enet0.use_internal_phy) {
+-		if (BCMCPU_IS_6348())
+-			val |= GPIO_MODE_6348_G3_EXT_MII |
+-				GPIO_MODE_6348_G0_EXT_MII;
+-	}
+-
+-	if (board.has_enet1 && !board.enet1.use_internal_phy) {
+-		if (BCMCPU_IS_6348())
+-			val |= GPIO_MODE_6348_G3_EXT_MII |
+-				GPIO_MODE_6348_G0_EXT_MII;
+-	}
+-
+-	bcm_gpio_writel(val, GPIO_MODE_REG);
+-}
+-
+-/*
+- * second stage init callback, good time to panic if we couldn't
+- * identify on which board we're running since early printk is working
+- */
+-void __init board_setup(void)
+-{
+-	if (!board.name[0])
+-		panic("unable to detect bcm963xx board");
+-	printk(KERN_INFO PFX "board name: %s\n", board.name);
+-
+-	/* make sure we're running on expected cpu */
+-	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
+-		panic("unexpected CPU for bcm963xx board");
+-}
+-
+-static struct gpio_led_platform_data bcm63xx_led_data;
+-
+-static struct platform_device bcm63xx_gpio_leds = {
+-	.name			= "leds-gpio",
+-	.id			= 0,
+-	.dev.platform_data	= &bcm63xx_led_data,
+-};
+-
+-/*
+- * third stage init callback, register all board devices.
+- */
+-int __init board_register_devices(void)
+-{
+-	if (board.has_uart0)
+-		bcm63xx_uart_register(0);
+-
+-	if (board.has_uart1)
+-		bcm63xx_uart_register(1);
+-
+-	if (board.has_pccard)
+-		bcm63xx_pcmcia_register();
+-
+-	if (board.has_enet0 &&
+-	    !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
+-		bcm63xx_enet_register(0, &board.enet0);
+-
+-	if (board.has_enet1 &&
+-	    !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
+-		bcm63xx_enet_register(1, &board.enet1);
+-
+-	if (board.has_enetsw &&
+-	    !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
+-		bcm63xx_enetsw_register(&board.enetsw);
+-
+-	if (board.has_usbd)
+-		bcm63xx_usbd_register(&board.usbd);
+-
+-	if (board.has_ehci0)
+-		bcm63xx_ehci_register();
+-
+-	if (board.has_ohci0)
+-		bcm63xx_ohci_register();
+-
+-	if (board.has_dsp)
+-		bcm63xx_dsp_register(&board.dsp);
+-
+-	/* Generate MAC address for WLAN and register our SPROM,
+-	 * do this after registering enet devices
+-	 */
+-#ifdef CONFIG_SSB_PCIHOST
+-	if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
+-		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+-		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+-		if (ssb_arch_register_fallback_sprom(
+-				&bcm63xx_get_fallback_sprom) < 0)
+-			pr_err(PFX "failed to register fallback SPROM\n");
+ 	}
+-#endif
+-
+-	bcm63xx_spi_register();
+-
+-	bcm63xx_hsspi_register();
+-
+-	bcm63xx_flash_register();
+-
+-	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
+-	bcm63xx_led_data.leds = board.leds;
+-
+-	platform_device_register(&bcm63xx_gpio_leds);
+-
+-	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
+-		gpio_request_one(board.ephy_reset_gpio,
+-				board.ephy_reset_gpio_flags, "ephy-reset");
+-
+-	return 0;
+ }
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -0,0 +1,217 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <[email protected]>
++ * Copyright (C) 2008 Florian Fainelli <[email protected]>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/ssb/ssb.h>
++#include <asm/addrspace.h>
++#include <bcm63xx_board.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_uart.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_nvram.h>
++#include <bcm63xx_dev_pci.h>
++#include <bcm63xx_dev_enet.h>
++#include <bcm63xx_dev_dsp.h>
++#include <bcm63xx_dev_flash.h>
++#include <bcm63xx_dev_hsspi.h>
++#include <bcm63xx_dev_pcmcia.h>
++#include <bcm63xx_dev_spi.h>
++#include <bcm63xx_dev_usb_ehci.h>
++#include <bcm63xx_dev_usb_ohci.h>
++#include <bcm63xx_dev_usb_usbd.h>
++#include <board_bcm963xx.h>
++
++#define PFX	"board: "
++
++static struct board_info board;
++
++/*
++ * Register a sane SPROMv2 to make the on-board
++ * bcm4318 WLAN work
++ */
++#ifdef CONFIG_SSB_PCIHOST
++static struct ssb_sprom bcm63xx_sprom = {
++	.revision		= 0x02,
++	.board_rev		= 0x17,
++	.country_code		= 0x0,
++	.ant_available_bg	= 0x3,
++	.pa0b0			= 0x15ae,
++	.pa0b1			= 0xfa85,
++	.pa0b2			= 0xfe8d,
++	.pa1b0			= 0xffff,
++	.pa1b1			= 0xffff,
++	.pa1b2			= 0xffff,
++	.gpio0			= 0xff,
++	.gpio1			= 0xff,
++	.gpio2			= 0xff,
++	.gpio3			= 0xff,
++	.maxpwr_bg		= 0x004c,
++	.itssi_bg		= 0x00,
++	.boardflags_lo		= 0x2848,
++	.boardflags_hi		= 0x0000,
++};
++
++int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
++{
++	if (bus->bustype == SSB_BUSTYPE_PCI) {
++		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
++		return 0;
++	} else {
++		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
++		return -EINVAL;
++	}
++}
++#endif
++
++/*
++ * return board name for /proc/cpuinfo
++ */
++const char *board_get_name(void)
++{
++	return board.name;
++}
++
++/*
++ * setup board for device registration
++ */
++void __init board_early_setup(const struct board_info *target)
++{
++	u32 val;
++
++	memcpy(&board, target, sizeof(board));
++
++	/* setup pin multiplexing depending on board enabled device,
++	 * this has to be done this early since PCI init is done
++	 * inside arch_initcall */
++	val = 0;
++
++#ifdef CONFIG_PCI
++	if (board.has_pci) {
++		bcm63xx_pci_enabled = 1;
++		if (BCMCPU_IS_6348())
++			val |= GPIO_MODE_6348_G2_PCI;
++	}
++#endif
++
++	if (board.has_pccard) {
++		if (BCMCPU_IS_6348())
++			val |= GPIO_MODE_6348_G1_MII_PCCARD;
++	}
++
++	if (board.has_enet0 && !board.enet0.use_internal_phy) {
++		if (BCMCPU_IS_6348())
++			val |= GPIO_MODE_6348_G3_EXT_MII |
++				GPIO_MODE_6348_G0_EXT_MII;
++	}
++
++	if (board.has_enet1 && !board.enet1.use_internal_phy) {
++		if (BCMCPU_IS_6348())
++			val |= GPIO_MODE_6348_G3_EXT_MII |
++				GPIO_MODE_6348_G0_EXT_MII;
++	}
++
++	bcm_gpio_writel(val, GPIO_MODE_REG);
++}
++
++
++/*
++ * second stage init callback, good time to panic if we couldn't
++ * identify on which board we're running since early printk is working
++ */
++void __init board_setup(void)
++{
++	if (!board.name[0])
++		panic("unable to detect bcm963xx board");
++	printk(KERN_INFO PFX "board name: %s\n", board.name);
++
++	/* make sure we're running on expected cpu */
++	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
++		panic("unexpected CPU for bcm963xx board");
++}
++
++static struct gpio_led_platform_data bcm63xx_led_data;
++
++static struct platform_device bcm63xx_gpio_leds = {
++	.name			= "leds-gpio",
++	.id			= 0,
++	.dev.platform_data	= &bcm63xx_led_data,
++};
++
++/*
++ * third stage init callback, register all board devices.
++ */
++int __init board_register_devices(void)
++{
++	if (board.has_uart0)
++		bcm63xx_uart_register(0);
++
++	if (board.has_uart1)
++		bcm63xx_uart_register(1);
++
++	if (board.has_pccard)
++		bcm63xx_pcmcia_register();
++
++	if (board.has_enet0 &&
++	    !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
++		bcm63xx_enet_register(0, &board.enet0);
++
++	if (board.has_enet1 &&
++	    !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
++		bcm63xx_enet_register(1, &board.enet1);
++
++	if (board.has_enetsw &&
++	    !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
++		bcm63xx_enetsw_register(&board.enetsw);
++
++	if (board.has_usbd)
++		bcm63xx_usbd_register(&board.usbd);
++
++	if (board.has_ehci0)
++		bcm63xx_ehci_register();
++
++	if (board.has_ohci0)
++		bcm63xx_ohci_register();
++
++	if (board.has_dsp)
++		bcm63xx_dsp_register(&board.dsp);
++
++	/* Generate MAC address for WLAN and register our SPROM,
++	 * do this after registering enet devices
++	 */
++#ifdef CONFIG_SSB_PCIHOST
++	if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
++		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
++		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
++		if (ssb_arch_register_fallback_sprom(
++				&bcm63xx_get_fallback_sprom) < 0)
++			pr_err(PFX "failed to register fallback SPROM\n");
++	}
++#endif
++
++	bcm63xx_spi_register();
++
++	bcm63xx_hsspi_register();
++
++	bcm63xx_flash_register();
++
++	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
++	bcm63xx_led_data.leds = board.leds;
++
++	platform_device_register(&bcm63xx_gpio_leds);
++
++	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
++		gpio_request_one(board.ephy_reset_gpio,
++				board.ephy_reset_gpio_flags, "ephy-reset");
++
++	return 0;
++}
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -0,0 +1,8 @@
++#ifndef __BOARD_COMMON_H
++#define __BOARD_COMMON_H
++
++#include <board_bcm963xx.h>
++
++void board_early_setup(const struct board_info *board);
++
++#endif /* __BOARD_COMMON_H */

target/linux/brcm63xx/patches-3.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch

@@ -0,0 +1,100 @@
+From 4e9c34a37bd3442b286ba55441bfe22c1ac5b65f Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <[email protected]>
+Date: Sun, 9 Mar 2014 04:08:06 +0100
+Subject: [PATCH 41/44] MIPS: BCM63XX: pass a mac addresss allocator to board
+ setup
+
+Pass a mac address allocator to board setup code to allow board
+implementations to work with third party bootloaders not using nvram
+for configuration storage.
+
+Signed-off-by: Jonas Gorski <[email protected]>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |  3 ++-
+ arch/mips/bcm63xx/boards/board_common.c   | 16 ++++++++++------
+ arch/mips/bcm63xx/boards/board_common.h   |  3 ++-
+ 3 files changed, 14 insertions(+), 8 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -742,7 +742,8 @@ void __init board_prom_init(void)
+ 		if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
+ 			continue;
+ 		/* copy, board desc array is marked initdata */
+-		board_early_setup(bcm963xx_boards[i]);
++		board_early_setup(bcm963xx_boards[i],
++				  bcm63xx_nvram_get_mac_address);
+ 		break;
+ 	}
+ 
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -18,7 +18,6 @@
+ #include <bcm63xx_dev_uart.h>
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
+-#include <bcm63xx_nvram.h>
+ #include <bcm63xx_dev_pci.h>
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_dsp.h>
+@@ -81,15 +80,20 @@ const char *board_get_name(void)
+ 	return board.name;
+ }
+ 
++static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
++
+ /*
+  * setup board for device registration
+  */
+-void __init board_early_setup(const struct board_info *target)
++void __init board_early_setup(const struct board_info *target,
++			      int (*get_mac_address)(u8 mac[ETH_ALEN]))
+ {
+ 	u32 val;
+ 
+ 	memcpy(&board, target, sizeof(board));
+ 
++	board_get_mac_address = get_mac_address;
++
+ 	/* setup pin multiplexing depending on board enabled device,
+ 	 * this has to be done this early since PCI init is done
+ 	 * inside arch_initcall */
+@@ -162,15 +166,15 @@ int __init board_register_devices(void)
+ 		bcm63xx_pcmcia_register();
+ 
+ 	if (board.has_enet0 &&
+-	    !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
++	    !board_get_mac_address(board.enet0.mac_addr))
+ 		bcm63xx_enet_register(0, &board.enet0);
+ 
+ 	if (board.has_enet1 &&
+-	    !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
++	    !board_get_mac_address(board.enet1.mac_addr))
+ 		bcm63xx_enet_register(1, &board.enet1);
+ 
+ 	if (board.has_enetsw &&
+-	    !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
++	    !board_get_mac_address(board.enetsw.mac_addr))
+ 		bcm63xx_enetsw_register(&board.enetsw);
+ 
+ 	if (board.has_usbd)
+@@ -189,7 +193,7 @@ int __init board_register_devices(void)
+ 	 * do this after registering enet devices
+ 	 */
+ #ifdef CONFIG_SSB_PCIHOST
+-	if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
++	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+ 		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+ 		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+ 		if (ssb_arch_register_fallback_sprom(
+--- a/arch/mips/bcm63xx/boards/board_common.h
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -3,6 +3,7 @@
+ 
+ #include <board_bcm963xx.h>
+ 
+-void board_early_setup(const struct board_info *board);
++void board_early_setup(const struct board_info *board,
++		       int (*get_mac_address)(u8 mac[ETH_ALEN]));
+ 
+ #endif /* __BOARD_COMMON_H */

target/linux/brcm63xx/patches-3.14/300-reset_buttons.patch

@@ -1,25 +1,25 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -12,6 +12,8 @@
+@@ -10,6 +10,8 @@
+ #include <linux/init.h>
+ #include <linux/kernel.h>
  #include <linux/string.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
 +#include <linux/gpio_keys.h>
 +#include <linux/input.h>
  #include <asm/addrspace.h>
  #include <bcm63xx_board.h>
  #include <bcm63xx_cpu.h>
-@@ -37,6 +39,9 @@
+@@ -26,6 +28,9 @@
  
  #define HCS_OFFSET_128K			0x20000
  
 +#define BCM963XX_KEYS_POLL_INTERVAL	20
 +#define BCM963XX_KEYS_DEBOUNCE_INTERVAL	(BCM963XX_KEYS_POLL_INTERVAL * 3)
 +
- static struct board_info board;
- 
  /*
-@@ -380,6 +385,16 @@ static struct board_info __initdata boar
+  * known 3368 boards
+  */
+@@ -367,6 +372,16 @@ static struct board_info __initdata boar
  			.active_low	= 1,
  		},
  	},
@@ -36,7 +36,7 @@
  };
  
  static struct board_info __initdata board_96348gw = {
-@@ -438,6 +453,16 @@ static struct board_info __initdata boar
+@@ -425,6 +440,16 @@ static struct board_info __initdata boar
  			.active_low	= 1,
  		},
  	},
@@ -53,7 +53,26 @@
  };
  
  static struct board_info __initdata board_FAST2404 = {
-@@ -871,11 +896,23 @@ static struct platform_device bcm63xx_gp
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -12,6 +12,7 @@
+ #include <linux/string.h>
+ #include <linux/platform_device.h>
+ #include <linux/ssb/ssb.h>
++#include <linux/gpio_keys.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -32,6 +33,8 @@
+ 
+ #define PFX	"board: "
+ 
++#define BCM963XX_KEYS_POLL_INTERVAL	20
++
+ static struct board_info board;
+ 
+ /*
+@@ -151,11 +154,23 @@ static struct platform_device bcm63xx_gp
  	.dev.platform_data	= &bcm63xx_led_data,
  };
  
@@ -77,7 +96,7 @@
  	if (board.has_uart0)
  		bcm63xx_uart_register(0);
  
-@@ -937,5 +974,16 @@ int __init board_register_devices(void)
+@@ -217,5 +232,16 @@ int __init board_register_devices(void)
  		gpio_request_one(board.ephy_reset_gpio,
  				board.ephy_reset_gpio_flags, "ephy-reset");
  

target/linux/brcm63xx/patches-3.14/301-led_count.patch

@@ -1,6 +1,6 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -912,6 +912,7 @@ static struct platform_device bcm63xx_gp
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -170,6 +170,7 @@ static struct platform_device bcm63xx_gp
  int __init board_register_devices(void)
  {
  	int button_count = 0;
@@ -8,7 +8,7 @@
  
  	if (board.has_uart0)
  		bcm63xx_uart_register(0);
-@@ -965,10 +966,16 @@ int __init board_register_devices(void)
+@@ -223,10 +224,16 @@ int __init board_register_devices(void)
  
  	bcm63xx_flash_register();
  

target/linux/brcm63xx/patches-3.14/302-extended-platform-devices.patch

@@ -1,6 +1,6 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -964,6 +964,9 @@ int __init board_register_devices(void)
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -222,6 +222,9 @@ int __init board_register_devices(void)
  
  	bcm63xx_hsspi_register();
  

target/linux/brcm63xx/patches-3.14/303-spi-board-info.patch

@@ -1,14 +1,14 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -14,6 +14,7 @@
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -13,6 +13,7 @@
+ #include <linux/platform_device.h>
  #include <linux/ssb/ssb.h>
  #include <linux/gpio_keys.h>
- #include <linux/input.h>
 +#include <linux/spi/spi.h>
  #include <asm/addrspace.h>
  #include <bcm63xx_board.h>
  #include <bcm63xx_cpu.h>
-@@ -967,6 +968,9 @@ int __init board_register_devices(void)
+@@ -225,6 +226,9 @@ int __init board_register_devices(void)
  	if (board.num_devs)
  		platform_add_devices(board.devs, board.num_devs);
  

target/linux/brcm63xx/patches-3.14/304-boardid_fixup.patch

@@ -1,26 +1,26 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -35,6 +35,7 @@
- #include <board_bcm963xx.h>
+@@ -23,6 +23,7 @@
+ #include "board_common.h"
  
  #include <uapi/linux/bcm933xx_hcs.h>
 +#include <uapi/linux/bcm963xx_tag.h>
  
  #define PFX	"board_bcm963xx: "
  
-@@ -43,6 +44,9 @@
- #define BCM963XX_KEYS_POLL_INTERVAL	20
- #define BCM963XX_KEYS_DEBOUNCE_INTERVAL	(BCM963XX_KEYS_POLL_INTERVAL * 3)
+@@ -339,6 +340,9 @@ static struct board_info __initdata boar
+ 		.force_duplex_full	= 1,
+ 	},
  
 +#define CFE_OFFSET_64K			0x10000
 +#define CFE_OFFSET_128K			0x20000
 +
- static struct board_info board;
  
- /*
-@@ -782,6 +786,30 @@ const char *board_get_name(void)
- 	return board.name;
- }
+ 	.has_ohci0 = 1,
+ 	.has_pccard = 1,
+@@ -722,6 +726,30 @@ static const struct board_info __initcon
+ #endif
+ };
  
 +static void __init boardid_fixup(u8 *boot_addr)
 +{
@@ -49,7 +49,7 @@
  /*
   * early init callback, read nvram data from flash and checksum it
   */
-@@ -820,6 +848,10 @@ void __init board_prom_init(void)
+@@ -760,6 +788,10 @@ void __init board_prom_init(void)
  		hcs = (struct bcm_hcs *)boot_addr;
  		board_name = hcs->filename;
  	} else {

target/linux/brcm63xx/patches-3.14/308-board_leds_naming.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -148,28 +148,28 @@ static struct board_info __initdata boar
+@@ -131,28 +131,28 @@ static struct board_info __initdata boar
  
  	.leds = {
  		{
@@ -34,7 +34,7 @@
  			.gpio		= 1,
  			.active_low	= 1,
  		}
-@@ -189,28 +189,28 @@ static struct board_info __initdata boar
+@@ -172,28 +172,28 @@ static struct board_info __initdata boar
  
  	.leds = {
  		{
@@ -68,7 +68,7 @@
  			.gpio		= 1,
  			.active_low	= 1,
  		},
-@@ -249,29 +249,29 @@ static struct board_info __initdata boar
+@@ -232,29 +232,29 @@ static struct board_info __initdata boar
  
  	.leds = {
  		{
@@ -103,7 +103,7 @@
  			.gpio		= 1,
  			.active_low	= 1,
  		},
-@@ -310,28 +310,28 @@ static struct board_info __initdata boar
+@@ -293,28 +293,28 @@ static struct board_info __initdata boar
  
  	.leds = {
  		{
@@ -137,7 +137,7 @@
  			.gpio		= 1,
  			.active_low	= 1,
  		},
-@@ -364,28 +364,28 @@ static struct board_info __initdata boar
+@@ -350,28 +350,28 @@ static struct board_info __initdata boar
  
  	.leds = {
  		{
@@ -171,7 +171,7 @@
  			.gpio		= 1,
  			.active_low	= 1,
  		},
-@@ -432,28 +432,28 @@ static struct board_info __initdata boar
+@@ -418,28 +418,28 @@ static struct board_info __initdata boar
  
  	.leds = {
  		{
@@ -205,7 +205,7 @@
  			.gpio		= 1,
  			.active_low	= 1,
  		},
-@@ -585,27 +585,27 @@ static struct board_info __initdata boar
+@@ -571,27 +571,27 @@ static struct board_info __initdata boar
  
  	.leds = {
  		{
@@ -238,7 +238,7 @@
  			.gpio		= 5,
  		},
  	},
-@@ -637,22 +637,22 @@ static struct board_info __initdata boar
+@@ -623,22 +623,22 @@ static struct board_info __initdata boar
  
  	.leds = {
  		{

target/linux/brcm63xx/patches-3.14/309-cfe_version_mod.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -835,10 +835,20 @@ void __init board_prom_init(void)
+@@ -775,10 +775,20 @@ void __init board_prom_init(void)
  
  	/* dump cfe version */
  	cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;

target/linux/brcm63xx/patches-3.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch

@@ -35,7 +35,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
  source "arch/mips/bcm63xx/boards/Kconfig"
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -825,7 +825,7 @@ void __init board_prom_init(void)
+@@ -765,7 +765,7 @@ void __init board_prom_init(void)
  	/* read base address of boot chip select (0)
  	 * 6328/6362 do not have MPI but boot from a fixed address
  	 */

target/linux/brcm63xx/patches-3.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch

@@ -35,7 +35,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
  	select SYS_HAS_CPU_BMIPS4350
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -825,7 +825,7 @@ void __init board_prom_init(void)
+@@ -765,7 +765,7 @@ void __init board_prom_init(void)
  	/* read base address of boot chip select (0)
  	 * 6328/6362 do not have MPI but boot from a fixed address
  	 */

target/linux/brcm63xx/patches-3.14/347-MIPS-BCM6318-USB-support.patch

@@ -93,9 +93,9 @@
  
  /*************************************************************************
   * _REG relative to RSET_USBD
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -914,6 +914,15 @@ void __init board_prom_init(void)
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -129,6 +129,15 @@ void __init board_early_setup(const stru
  	}
  
  	bcm_gpio_writel(val, GPIO_MODE_REG);
@@ -110,7 +110,7 @@
 +#endif
  }
  
- /*
+ 
 --- a/arch/mips/bcm63xx/Kconfig
 +++ b/arch/mips/bcm63xx/Kconfig
 @@ -22,6 +22,8 @@ config BCM63XX_CPU_6318

target/linux/brcm63xx/patches-3.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch

@@ -28,9 +28,9 @@
 +int bcm63xx_ohci_register(unsigned int num_ports);
  
  #endif /* BCM63XX_DEV_USB_OHCI_H_ */
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -965,6 +965,7 @@ int __init board_register_devices(void)
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -181,6 +181,7 @@ int __init board_register_devices(void)
  {
  	int button_count = 0;
  	int led_count = 0;
@@ -38,8 +38,8 @@
  
  	if (board.has_uart0)
  		bcm63xx_uart_register(0);
-@@ -987,14 +988,21 @@ int __init board_register_devices(void)
- 	    !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
+@@ -203,14 +204,21 @@ int __init board_register_devices(void)
+ 	    !board_get_mac_address(board.enetsw.mac_addr))
  		bcm63xx_enetsw_register(&board.enetsw);
  
 +	if ((board.has_ohci0 || board.has_ehci0)) {

target/linux/brcm63xx/patches-3.14/351-set-board-usbh-ports.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -634,6 +634,7 @@ static struct board_info __initdata boar
+@@ -620,6 +620,7 @@ static struct board_info __initdata boar
  	.has_ohci0 = 1,
  	.has_pccard = 1,
  	.has_ehci0 = 1,

target/linux/brcm63xx/patches-3.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch

@@ -0,0 +1,95 @@
+From 0daf361ea799fba0af5a232036d0f06cea85ad24 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <[email protected]>
+Date: Sat, 21 Jun 2014 12:47:49 +0200
+Subject: [PATCH 42/44] MIPS: BCM63XX: allow building support for more than one
+ board type
+
+Use the arguments passed to the kernel to detect being booted with
+CFE as the indicator for bcm963xx board support, allowing the
+non presence of CFE_EPTSEAL to assume a different board type.
+
+Signed-off-by: Jonas Gorski <[email protected]>
+---
+ arch/mips/bcm63xx/boards/Kconfig          |  7 +++----
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |  2 +-
+ arch/mips/bcm63xx/boards/board_common.c   | 13 +++++++++++++
+ arch/mips/bcm63xx/boards/board_common.h   |  6 ++++++
+ 4 files changed, 23 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/Kconfig
++++ b/arch/mips/bcm63xx/boards/Kconfig
+@@ -1,11 +1,10 @@
+-choice
+-	prompt "Board support"
++menu "Board support"
+ 	depends on BCM63XX
+-	default BOARD_BCM963XX
+ 
+ config BOARD_BCM963XX
+        bool "Generic Broadcom 963xx boards"
+ 	select SSB
++	default y
+        help
+ 
+-endchoice
++endmenu
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -754,7 +754,7 @@ static void __init boardid_fixup(u8 *boo
+ /*
+  * early init callback, read nvram data from flash and checksum it
+  */
+-void __init board_prom_init(void)
++void __init board_bcm963xx_init(void)
+ {
+ 	unsigned int i;
+ 	u8 *boot_addr, *cfe;
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -15,6 +15,8 @@
+ #include <linux/gpio_keys.h>
+ #include <linux/spi/spi.h>
+ #include <asm/addrspace.h>
++#include <asm/bootinfo.h>
++#include <asm/fw/cfe/cfe_api.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_uart.h>
+@@ -32,6 +34,8 @@
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
+ 
++#include "board_common.h"
++
+ #define PFX	"board: "
+ 
+ #define BCM963XX_KEYS_POLL_INTERVAL	20
+@@ -84,6 +88,15 @@ const char *board_get_name(void)
+ 	return board.name;
+ }
+ 
++void __init board_prom_init(void)
++{
++	/* detect bootloader */
++	if (fw_arg3 == CFE_EPTSEAL)
++		board_bcm963xx_init();
++	else
++		panic("unsupported bootloader detected");
++}
++
+ static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
+ 
+ /*
+--- a/arch/mips/bcm63xx/boards/board_common.h
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -6,4 +6,10 @@
+ void board_early_setup(const struct board_info *board,
+ 		       int (*get_mac_address)(u8 mac[ETH_ALEN]));
+ 
++#if defined(CONFIG_BOARD_BCM963XX)
++void board_bcm963xx_init(void);
++#else
++static inline void board_bcm963xx_init(void) { }
++#endif
++
+ #endif /* __BOARD_COMMON_H */

target/linux/brcm63xx/patches-3.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch

@@ -0,0 +1,61 @@
+From 8a30097a899b975709f728666d5ad20c8b832d21 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <[email protected]>
+Date: Sun, 9 Mar 2014 04:28:14 +0100
+Subject: [PATCH 43/44] MIPS: BCM63XX: allow board implementations to force
+ flash address
+
+Allow board implementations to force the physmap address.
+
+Signed-off-by: Jonas Gorski <[email protected]>
+---
+ arch/mips/bcm63xx/dev-flash.c                         | 19 ++++++++++++++-----
+ .../mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
+ 2 files changed, 16 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -57,6 +57,12 @@ static struct platform_device mtd_dev =
+ 	},
+ };
+ 
++void __init bcm63xx_flash_force_phys_base_address(u32 start, u32 end)
++{
++	mtd_resources[0].start = start;
++	mtd_resources[0].end = end;
++}
++
+ static int __init bcm63xx_detect_flash_type(void)
+ {
+ 	u32 val;
+@@ -158,12 +164,15 @@ int __init bcm63xx_flash_register(void)
+ 
+ 	switch (flash_type) {
+ 	case BCM63XX_FLASH_TYPE_PARALLEL:
+-		/* read base address of boot chip select (0) */
+-		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+-		val &= MPI_CSBASE_BASE_MASK;
+ 
+-		mtd_resources[0].start = val;
+-		mtd_resources[0].end = 0x1FFFFFFF;
++		if (!mtd_resources[0].start) {
++			/* read base address of boot chip select (0) */
++			val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++			val &= MPI_CSBASE_BASE_MASK;
++
++			mtd_resources[0].start = val;
++			mtd_resources[0].end = 0x1FFFFFFF;
++		}
+ 
+ 		return platform_device_register(&mtd_dev);
+ 	case BCM63XX_FLASH_TYPE_SERIAL:
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -9,6 +9,8 @@ enum {
+ 
+ void bcm63xx_flash_detect(void);
+ 
++void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
++
+ int __init bcm63xx_flash_register(void);
+ 
+ #endif /* __BCM63XX_FLASH_H */

target/linux/brcm63xx/patches-3.14/403-6358-enet1-external-mii-clk.patch

@@ -1,6 +1,6 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -912,6 +912,8 @@ void __init board_prom_init(void)
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -139,6 +139,8 @@ void __init board_early_setup(const stru
  		if (BCMCPU_IS_6348())
  			val |= GPIO_MODE_6348_G3_EXT_MII |
  				GPIO_MODE_6348_G0_EXT_MII;

target/linux/brcm63xx/patches-3.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch

@@ -24,9 +24,9 @@ Signed-off-by: Jonas Gorski <[email protected]>
  #include <bcm63xx_regs.h>
  #include <bcm63xx_io.h>
  
-@@ -57,6 +60,21 @@ static struct platform_device mtd_dev =
- 	},
- };
+@@ -63,6 +66,21 @@ void __init bcm63xx_flash_force_phys_bas
+ 	mtd_resources[0].end = end;
+ }
  
 +static struct flash_platform_data bcm63xx_flash_data = {
 +	.part_probe_types	= bcm63xx_part_types,
@@ -46,7 +46,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
  static int __init bcm63xx_detect_flash_type(void)
  {
  	u32 val;
-@@ -64,9 +82,15 @@ static int __init bcm63xx_detect_flash_t
+@@ -70,9 +88,15 @@ static int __init bcm63xx_detect_flash_t
  	switch (bcm63xx_get_cpu_id()) {
  	case BCM6318_CPU_ID:
  		/* only support serial flash */
@@ -62,7 +62,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
  		if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
  			return BCM63XX_FLASH_TYPE_SERIAL;
  		else
-@@ -85,12 +109,20 @@ static int __init bcm63xx_detect_flash_t
+@@ -91,12 +115,20 @@ static int __init bcm63xx_detect_flash_t
  			return BCM63XX_FLASH_TYPE_SERIAL;
  	case BCM6362_CPU_ID:
  		val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
@@ -83,7 +83,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
  		switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
  		case STRAPBUS_6368_BOOT_SEL_NAND:
  			return BCM63XX_FLASH_TYPE_NAND;
-@@ -101,6 +133,11 @@ static int __init bcm63xx_detect_flash_t
+@@ -107,6 +139,11 @@ static int __init bcm63xx_detect_flash_t
  		}
  	case BCM63268_CPU_ID:
  		val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
@@ -95,7 +95,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
  		if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
  			return BCM63XX_FLASH_TYPE_SERIAL;
  		else
-@@ -167,8 +204,15 @@ int __init bcm63xx_flash_register(void)
+@@ -176,8 +213,15 @@ int __init bcm63xx_flash_register(void)
  
  		return platform_device_register(&mtd_dev);
  	case BCM63XX_FLASH_TYPE_SERIAL:

target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch

@@ -8,17 +8,17 @@ Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
  arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |   10 ++++++++++
  2 files changed, 18 insertions(+), 1 deletion(-)
 
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
 @@ -33,6 +33,7 @@
  #include <bcm63xx_dev_usb_ohci.h>
  #include <bcm63xx_dev_usb_usbd.h>
  #include <board_bcm963xx.h>
 +#include <pci_ath9k_fixup.h>
  
- #include <uapi/linux/bcm933xx_hcs.h>
- #include <uapi/linux/bcm963xx_tag.h>
-@@ -969,6 +970,7 @@ int __init board_register_devices(void)
+ #include "board_common.h"
+ 
+@@ -197,6 +198,7 @@ int __init board_register_devices(void)
  	int button_count = 0;
  	int led_count = 0;
  	int usbh_ports = 0;
@@ -26,17 +26,17 @@ Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
  
  	if (board.has_uart0)
  		bcm63xx_uart_register(0);
-@@ -1014,7 +1016,8 @@ int __init board_register_devices(void)
+@@ -242,7 +244,8 @@ int __init board_register_devices(void)
  	 * do this after registering enet devices
  	 */
  #ifdef CONFIG_SSB_PCIHOST
--	if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
+-	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
 +	if (!board.has_caldata &&
-+	    !bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
++	    !board_get_mac_address(bcm63xx_sprom.il0mac)) {
  		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
  		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
  		if (ssb_arch_register_fallback_sprom(
-@@ -1061,5 +1064,9 @@ int __init board_register_devices(void)
+@@ -289,5 +292,9 @@ int __init board_register_devices(void)
  		platform_device_register(&bcm63xx_gpio_keys_device);
  	}
  

target/linux/brcm63xx/patches-3.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch

@@ -11,7 +11,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
 
 --- a/arch/mips/bcm63xx/dev-flash.c
 +++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -222,3 +222,8 @@ int __init bcm63xx_flash_register(void)
+@@ -231,3 +231,8 @@ int __init bcm63xx_flash_register(void)
  		return -ENODEV;
  	}
  }
@@ -22,7 +22,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
 +}
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -11,4 +11,6 @@ void bcm63xx_flash_detect(void);
+@@ -13,4 +13,6 @@ void bcm63xx_flash_force_phys_base_addre
  
  int __init bcm63xx_flash_register(void);
  

target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch

@@ -4,14 +4,14 @@ Date: Thu, 3 May 2012 14:55:26 +0200
 Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
 
 ---
- arch/mips/bcm63xx/boards/board_bcm963xx.c              |    2 +-
+ arch/mips/bcm63xx/boards/board_common.c              |    2 +-
  arch/mips/bcm63xx/dev-flash.c                          |    9 ++++++++-
  arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |    4 +++-
  3 files changed, 12 insertions(+), 3 deletions(-)
 
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1036,7 +1036,7 @@ int __init board_register_devices(void)
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -264,7 +264,7 @@ int __init board_register_devices(void)
  	if (board.num_spis)
  		spi_register_board_info(board.spis, board.num_spis);
  
@@ -38,7 +38,7 @@ Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
  };
  
  static struct resource mtd_resources[] = {
-@@ -62,6 +65,7 @@ static struct platform_device mtd_dev =
+@@ -68,6 +71,7 @@ void __init bcm63xx_flash_force_phys_bas
  
  static struct flash_platform_data bcm63xx_flash_data = {
  	.part_probe_types	= bcm63xx_part_types,
@@ -46,7 +46,7 @@ Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
  };
  
  static struct spi_board_info bcm63xx_spi_flash_info[] = {
-@@ -189,9 +193,13 @@ void __init bcm63xx_flash_detect(void)
+@@ -195,9 +199,13 @@ void __init bcm63xx_flash_detect(void)
  	}
  }
  
@@ -72,9 +72,9 @@ Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
  enum {
  	BCM63XX_FLASH_TYPE_PARALLEL,
  	BCM63XX_FLASH_TYPE_SERIAL,
-@@ -9,7 +11,7 @@ enum {
+@@ -11,7 +13,7 @@ void bcm63xx_flash_detect(void);
  
- void bcm63xx_flash_detect(void);
+ void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
  
 -int __init bcm63xx_flash_register(void);
 +int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);

target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch

@@ -37,9 +37,9 @@
  
  	if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
  		return;
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1066,7 +1066,8 @@ int __init board_register_devices(void)
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -294,7 +294,8 @@ int __init board_register_devices(void)
  
  	/* register any fixups */
  	for (i = 0; i < board.has_caldata; i++)

target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch

@@ -1,6 +1,6 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1067,7 +1067,7 @@ int __init board_register_devices(void)
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -295,7 +295,7 @@ int __init board_register_devices(void)
  	/* register any fixups */
  	for (i = 0; i < board.has_caldata; i++)
  		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,

target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch

@@ -26,17 +26,17 @@ Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
  obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
  
  obj-y		+= boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
 @@ -34,6 +34,7 @@
  #include <bcm63xx_dev_usb_usbd.h>
  #include <board_bcm963xx.h>
  #include <pci_ath9k_fixup.h>
 +#include <pci_rt2x00_fixup.h>
  
- #include <uapi/linux/bcm933xx_hcs.h>
- #include <uapi/linux/bcm963xx_tag.h>
-@@ -1065,9 +1066,19 @@ int __init board_register_devices(void)
+ #include "board_common.h"
+ 
+@@ -293,9 +294,19 @@ int __init board_register_devices(void)
  	}
  
  	/* register any fixups */
@@ -61,7 +61,7 @@ Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
  }
 --- a/arch/mips/bcm63xx/dev-flash.c
 +++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -193,7 +193,7 @@ void __init bcm63xx_flash_detect(void)
+@@ -199,7 +199,7 @@ void __init bcm63xx_flash_detect(void)
  	}
  }
  
@@ -147,9 +147,9 @@ Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
 +
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -11,7 +11,7 @@ enum {
+@@ -13,7 +13,7 @@ void bcm63xx_flash_detect(void);
  
- void bcm63xx_flash_detect(void);
+ void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
  
 -int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
 +int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata);

target/linux/brcm63xx/patches-3.14/500-board-D4PW.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -555,6 +555,56 @@ static struct board_info __initdata boar
+@@ -539,6 +539,56 @@ static struct board_info __initdata boar
  
  	.has_ohci0 = 1,
  };
@@ -57,7 +57,7 @@
  #endif
  
  /*
-@@ -733,6 +783,7 @@ static const struct board_info __initcon
+@@ -717,6 +767,7 @@ static const struct board_info __initcon
  	&board_DV201AMR,
  	&board_96348gw_a,
  	&board_rta1025w_16,

target/linux/brcm63xx/patches-3.14/501-board-NB4.patch

@@ -1,9 +1,11 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -15,6 +15,10 @@
+@@ -12,6 +12,12 @@
+ #include <linux/string.h>
  #include <linux/gpio_keys.h>
  #include <linux/input.h>
- #include <linux/spi/spi.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
 +#include <linux/spi/spi_gpio.h>
 +#if 0 /* FIXME: 3.14 removed non-DT support */
 +#include <linux/spi/74x164.h>
@@ -11,7 +13,7 @@
  #include <asm/addrspace.h>
  #include <bcm63xx_board.h>
  #include <bcm63xx_cpu.h>
-@@ -49,6 +53,12 @@
+@@ -343,6 +349,12 @@ static struct board_info __initdata boar
  #define CFE_OFFSET_64K			0x10000
  #define CFE_OFFSET_128K			0x20000
  
@@ -21,10 +23,10 @@
 +#define NB4_SPI_GPIO_CLK	6
 +#define NB4_74HC64_GPIO(X)	(NB4_74X164_GPIO_BASE + (X))
 +
- static struct board_info board;
  
- /*
-@@ -755,6 +765,605 @@ static struct board_info __initdata boar
+ 	.has_ohci0 = 1,
+ 	.has_pccard = 1,
+@@ -739,6 +751,605 @@ static struct board_info __initdata boar
  
  	.has_ohci0			= 1,
  };
@@ -630,7 +632,7 @@
  #endif
  
  /*
-@@ -791,6 +1400,11 @@ static const struct board_info __initcon
+@@ -775,6 +1386,11 @@ static const struct board_info __initcon
  	&board_96358vw2,
  	&board_AGPFS0,
  	&board_DWVS0,
@@ -642,7 +644,7 @@
  #endif
  };
  
-@@ -845,6 +1459,16 @@ static void __init boardid_fixup(u8 *boo
+@@ -783,6 +1399,16 @@ static void __init boardid_fixup(u8 *boo
  	struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
  	char *board_name = (char *)bcm63xx_nvram_get_name();
  

target/linux/brcm63xx/patches-3.14/502-board-96338W2_E7T.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -228,6 +228,40 @@ static struct board_info __initdata boar
+@@ -205,6 +205,40 @@ static struct board_info __initdata boar
  		},
  	},
  };
@@ -41,7 +41,7 @@
  #endif
  
  /*
-@@ -1379,6 +1413,7 @@ static const struct board_info __initcon
+@@ -1365,6 +1399,7 @@ static const struct board_info __initcon
  #ifdef CONFIG_BCM63XX_CPU_6338
  	&board_96338gw,
  	&board_96338w,

target/linux/brcm63xx/patches-3.14/503-board-CPVA642.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -756,6 +756,98 @@ static struct board_info __initdata boar
+@@ -742,6 +742,98 @@ static struct board_info __initdata boar
  	},
  };
  
@@ -99,7 +99,7 @@
  static struct board_info __initdata board_AGPFS0 = {
  	.name				= "AGPF-S0",
  	.expected_cpu_id		= 0x6358,
-@@ -1434,6 +1526,7 @@ static const struct board_info __initcon
+@@ -1420,6 +1512,7 @@ static const struct board_info __initcon
  	&board_96358vw,
  	&board_96358vw2,
  	&board_AGPFS0,

target/linux/brcm63xx/patches-3.14/504-board_dsl_274xb_rev_c.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -892,6 +892,61 @@ static struct board_info __initdata boar
+@@ -878,6 +878,61 @@ static struct board_info __initdata boar
  	.has_ohci0			= 1,
  };
  
@@ -62,7 +62,7 @@
  struct spi_gpio_platform_data nb4_spi_gpio_data = {
  	.sck		= NB4_SPI_GPIO_CLK,
  	.mosi		= NB4_SPI_GPIO_MOSI,
-@@ -1528,6 +1583,7 @@ static const struct board_info __initcon
+@@ -1514,6 +1569,7 @@ static const struct board_info __initcon
  	&board_AGPFS0,
  	&board_CPVA642,
  	&board_DWVS0,

target/linux/brcm63xx/patches-3.14/505-board_spw500v.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -649,6 +649,67 @@ static struct board_info __initdata boar
+@@ -635,6 +635,67 @@ static struct board_info __initdata boar
  		},
  	},
  };
@@ -68,7 +68,7 @@
  #endif
  
  /*
-@@ -1575,6 +1636,7 @@ static const struct board_info __initcon
+@@ -1561,6 +1622,7 @@ static const struct board_info __initcon
  	&board_96348gw_a,
  	&board_rta1025w_16,
  	&board_96348_D4PW,

target/linux/brcm63xx/patches-3.14/506-board_gw6200_gw6000.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -516,6 +516,112 @@ static struct board_info __initdata boar
+@@ -502,6 +502,112 @@ static struct board_info __initdata boar
  	},
  };
  
@@ -113,7 +113,7 @@
  static struct board_info __initdata board_FAST2404 = {
  	.name				= "F@ST2404",
  	.expected_cpu_id		= 0x6348,
-@@ -1629,6 +1735,8 @@ static const struct board_info __initcon
+@@ -1615,6 +1721,8 @@ static const struct board_info __initcon
  #ifdef CONFIG_BCM63XX_CPU_6348
  	&board_96348r,
  	&board_96348gw,

target/linux/brcm63xx/patches-3.14/507-board-MAGIC.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -816,6 +816,78 @@ static struct board_info __initdata boar
+@@ -802,6 +802,78 @@ static struct board_info __initdata boar
  		},
  	},
  };
@@ -79,7 +79,7 @@
  #endif
  
  /*
-@@ -1745,6 +1817,7 @@ static const struct board_info __initcon
+@@ -1731,6 +1803,7 @@ static const struct board_info __initcon
  	&board_rta1025w_16,
  	&board_96348_D4PW,
  	&board_spw500v,

target/linux/brcm63xx/patches-3.14/508-board_hw553.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1784,6 +1784,83 @@ static struct board_info __initdata boar
+@@ -1770,6 +1770,83 @@ static struct board_info __initdata boar
  	.spis = nb4_spi_devices,
  	.num_spis = ARRAY_SIZE(nb4_spi_devices),
  };
@@ -84,7 +84,7 @@
  #endif
  
  /*
-@@ -1832,6 +1909,7 @@ static const struct board_info __initcon
+@@ -1818,6 +1895,7 @@ static const struct board_info __initcon
  	&board_nb4_ser_r2,
  	&board_nb4_fxc_r1,
  	&board_nb4_fxc_r2,

target/linux/brcm63xx/patches-3.14/509-board_rta1320_16m.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -262,6 +262,45 @@ static struct board_info __initdata boar
+@@ -239,6 +239,45 @@ static struct board_info __initdata boar
  		},
  	},
  };
@@ -46,7 +46,7 @@
  #endif
  
  /*
-@@ -1877,6 +1916,7 @@ static const struct board_info __initcon
+@@ -1863,6 +1902,7 @@ static const struct board_info __initcon
  	&board_96338gw,
  	&board_96338w,
  	&board_96338w2_e7t,

target/linux/brcm63xx/patches-3.14/510-board_spw303v.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1900,6 +1900,72 @@ static struct board_info __initdata boar
+@@ -1886,6 +1886,72 @@ static struct board_info __initdata boar
  		},
  	},
  };
@@ -73,7 +73,7 @@
  #endif
  
  /*
-@@ -1950,6 +2016,7 @@ static const struct board_info __initcon
+@@ -1936,6 +2002,7 @@ static const struct board_info __initcon
  	&board_nb4_fxc_r1,
  	&board_nb4_fxc_r2,
  	&board_HW553,

target/linux/brcm63xx/patches-3.14/511-board_V2500V.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -927,6 +927,65 @@ static struct board_info __initdata boar
+@@ -913,6 +913,65 @@ static struct board_info __initdata boar
  		},
  	},
  };
@@ -66,7 +66,7 @@
  #endif
  
  /*
-@@ -2001,6 +2060,7 @@ static const struct board_info __initcon
+@@ -1987,6 +2046,7 @@ static const struct board_info __initcon
  	&board_96348_D4PW,
  	&board_spw500v,
  	&board_96348sv,
@@ -74,7 +74,7 @@
  #endif
  
  #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -2122,6 +2182,22 @@ void __init board_prom_init(void)
+@@ -2062,6 +2122,22 @@ void __init board_bcm963xx_init(void)
  		val &= MPI_CSBASE_BASE_MASK;
  	}
  	boot_addr = (u8 *)KSEG1ADDR(val);
@@ -107,17 +107,17 @@
  #include <bcm63xx_cpu.h>
  #include <bcm63xx_dev_flash.h>
  #include <bcm63xx_dev_hsspi.h>
-@@ -207,6 +208,13 @@ int __init bcm63xx_flash_register(int nu
- 		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- 		val &= MPI_CSBASE_BASE_MASK;
+@@ -215,6 +216,13 @@ int __init bcm63xx_flash_register(int nu
+ 			val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ 			val &= MPI_CSBASE_BASE_MASK;
  
-+		/* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
-+		/* Loading from CFE always uses Bank 0 */
-+		if (!strcmp(board_get_name(), "V2500V_BB")) {
-+			pr_info("V2500V: Start in Bank 0\n");
-+			val = val + 0x400000; // Select Bank 0 start address
-+		}
++			/* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
++			/* Loading from CFE always uses Bank 0 */
++			if (!strcmp(board_get_name(), "V2500V_BB")) {
++				pr_info("V2500V: Start in Bank 0\n");
++				val = val + 0x400000; // Select Bank 0 start address
++			}
 +
- 		mtd_resources[0].start = val;
- 		mtd_resources[0].end = 0x1FFFFFFF;
- 
+ 			mtd_resources[0].start = val;
+ 			mtd_resources[0].end = 0x1FFFFFFF;
+ 		}

target/linux/brcm63xx/patches-3.14/512-board_BTV2110.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -487,6 +487,64 @@ static struct board_info __initdata boar
+@@ -473,6 +473,64 @@ static struct board_info __initdata boar
  	},
  };
  
@@ -65,7 +65,7 @@
  static struct board_info __initdata board_96348gw = {
  	.name				= "96348GW",
  	.expected_cpu_id		= 0x6348,
-@@ -2061,6 +2119,7 @@ static const struct board_info __initcon
+@@ -2047,6 +2105,7 @@ static const struct board_info __initcon
  	&board_spw500v,
  	&board_96348sv,
  	&board_V2500V_BB,

target/linux/brcm63xx/patches-3.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch

@@ -0,0 +1,257 @@
+From 7e6b22225e16fbb22dbf7f2113d8c6d65333818c Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <[email protected]>
+Date: Sun, 9 Mar 2014 04:55:52 +0100
+Subject: [PATCH 44/44] MIPS: BCM63XX: add inventel Livebox support
+
+---
+ arch/mips/bcm63xx/boards/Kconfig         |   6 +
+ arch/mips/bcm63xx/boards/Makefile        |   1 +
+ arch/mips/bcm63xx/boards/board_common.c  |   2 +-
+ arch/mips/bcm63xx/boards/board_common.h  |   6 +
+ arch/mips/bcm63xx/boards/board_livebox.c | 193 +++++++++++++++++++++++++++++++
+ 5 files changed, 207 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/bcm63xx/boards/board_livebox.c
+
+--- a/arch/mips/bcm63xx/boards/Kconfig
++++ b/arch/mips/bcm63xx/boards/Kconfig
+@@ -7,4 +7,10 @@ config BOARD_BCM963XX
+ 	default y
+        help
+ 
++config BOARD_LIVEBOX
++	bool "Inventel Livebox(es) boards"
++	select SSB
++	help
++	  Inventel Livebox boards using the RedBoot bootloader.
++
+ endmenu
+--- a/arch/mips/bcm63xx/boards/Makefile
++++ b/arch/mips/bcm63xx/boards/Makefile
+@@ -1,2 +1,3 @@
+ obj-y					+= board_common.o
+ obj-$(CONFIG_BOARD_BCM963XX)		+= board_bcm963xx.o
++obj-$(CONFIG_BOARD_LIVEBOX)		+= board_livebox.o
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -96,7 +96,7 @@ void __init board_prom_init(void)
+ 	if (fw_arg3 == CFE_EPTSEAL)
+ 		board_bcm963xx_init();
+ 	else
+-		panic("unsupported bootloader detected");
++		board_livebox_init();
+ }
+ 
+ static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
+--- a/arch/mips/bcm63xx/boards/board_common.h
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -12,4 +12,10 @@ void board_bcm963xx_init(void);
+ static inline void board_bcm963xx_init(void) { }
+ #endif
+ 
++#if defined(CONFIG_BOARD_LIVEBOX)
++void board_livebox_init(void);
++#else
++static inline void board_livebox_init(void) { }
++#endif
++
+ #endif /* __BOARD_COMMON_H */
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/board_livebox.c
+@@ -0,0 +1,197 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Florian Fainelli <[email protected]>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/input.h>
++#include <asm/addrspace.h>
++#include <bcm63xx_board.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_dev_flash.h>
++#include <board_bcm963xx.h>
++
++#include "board_common.h"
++
++#define PFX	"board_livebox: "
++
++#define LIVEBOX_KEYS_POLL_INTERVAL	20
++#define LIVEBOX_KEYS_DEBOUNCE_INTERVAL	(LIVEBOX_KEYS_POLL_INTERVAL * 3)
++
++static unsigned int mac_addr_used = 0;
++
++/*
++ * known 6348 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6348
++static struct board_info __initdata board_livebox_blue5g = {
++	.name				= "Livebox-blue-5g",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++
++	.enet1 = {
++		  .has_phy		= 1,
++		  .phy_id 		= 31,
++	},
++
++	.ephy_reset_gpio		= 6,
++	.ephy_reset_gpio_flags		= GPIOF_INIT_HIGH,
++
++	.has_ohci0			= 1,
++	.has_pccard			= 1,
++
++	.has_dsp			= 0, /*TODO some Liveboxes have dsp*/
++	.dsp = {
++		.gpio_rst		= 6, /*FIXME eth1 shares gpio6 with dsp?*/
++		.gpio_int		= 35,
++		.cs			= 2,
++		.ext_irq		= 2,
++	},
++
++	.leds = {
++		{
++			.name		= "Livebox-blue-5g::adsl-fail",
++			.gpio		= 0,
++			.active_low	= 0,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "Livebox-blue-5g::adsl",
++			.gpio		= 1,
++		},
++		{
++			.name		= "Livebox-blue-5g::traffic",
++			.gpio		= 2,
++		},
++		{
++			.name		= "Livebox-blue-5g::phone",
++			.gpio		= 3,
++		},
++		{
++			.name		= "Livebox-blue-5g::wifi",
++			.gpio		= 4,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "BTN_1",
++			.gpio		= 36,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= BTN_1,
++			.debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "BTN_2",
++			.gpio		= 7,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= BTN_2,
++			.debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
++		},
++
++	},
++};
++#endif
++
++/*
++ * all boards
++ */
++static const struct board_info __initdata *bcm963xx_boards[] = {
++#ifdef CONFIG_BCM63XX_CPU_6348
++	&board_livebox_blue5g
++#endif
++};
++
++/*
++ * register & return a new board mac address
++ */
++static int livebox_get_mac_address(u8 *mac)
++{
++	u8 *p;
++	int count;
++
++	memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
++
++	p = mac + ETH_ALEN - 1;
++	count = mac_addr_used;
++
++	while (count--) {
++		do {
++			(*p)++;
++			if (*p != 0)
++				break;
++			p--;
++		} while (p != mac);
++	}
++
++	if (p == mac) {
++		printk(KERN_ERR PFX "unable to fetch mac address\n");
++		return -ENODEV;
++	}
++        mac_addr_used++;
++
++	return 0;
++}
++
++/*
++ * early init callback
++ */
++#define LIVEBOX_GPIO_DETECT_MASK	0x000000ff
++#define LIVEBOX_BOOT_ADDR		0x1e400000
++
++#define LIVEBOX_HW_BLUE5G_9		0x90
++
++void __init board_livebox_init(void)
++{
++	u32 val;
++	u8 hw_version;
++	const struct board_info *board;
++
++	/* Get hardware version */
++	val = bcm_gpio_readl(GPIO_CTL_LO_REG);
++	val &= ~LIVEBOX_GPIO_DETECT_MASK;
++	bcm_gpio_writel(val, GPIO_CTL_LO_REG);
++
++	hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG) & LIVEBOX_GPIO_DETECT_MASK;
++	switch (hw_version) {
++	case LIVEBOX_HW_BLUE5G_9:
++		printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
++		board = bcm963xx_boards[0];
++		break;
++	default:
++		printk(KERN_INFO PFX "Unknown livebox version: %02x\n", hw_version);
++		/* use default livebox configuration */
++		board = bcm963xx_boards[0];
++		break;
++	}
++
++	/* use default livebox configuration */
++	board_early_setup(board, livebox_get_mac_address);
++
++	/* read base address of boot chip select (0) */
++	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++	val &= MPI_CSBASE_BASE_MASK;
++	if (val != LIVEBOX_BOOT_ADDR) {
++		printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
++			val, LIVEBOX_BOOT_ADDR);
++		bcm63xx_flash_force_phys_base_address(LIVEBOX_BOOT_ADDR, 0x1ebfffff);
++	}
++}

target/linux/brcm63xx/patches-3.14/513-board_livebox.patch

@@ -1,390 +0,0 @@
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -8,4 +8,10 @@ config BOARD_BCM963XX
- 	select SSB
-        help
- 
-+config BOARD_LIVEBOX
-+	bool "Inventel Livebox(es) boards"
-+	select SSB
-+	help
-+	 Inventel Livebox boards using the RedBoot bootloader.
-+
- endchoice
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1 +1,2 @@
- obj-$(CONFIG_BOARD_BCM963XX)		+= board_bcm963xx.o
-+obj-$(CONFIG_BOARD_LIVEBOX)		+= board_livebox.o
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,369 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Florian Fainelli <[email protected]>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/ssb/ssb.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/spi/spi.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_uart.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_dev_dsp.h>
-+#include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+#include <bcm63xx_dev_spi.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX	"board_livebox: "
-+
-+#define LIVEBOX_KEYS_POLL_INTERVAL	20
-+#define LIVEBOX_KEYS_DEBOUNCE_INTERVAL	(LIVEBOX_KEYS_POLL_INTERVAL * 3)
-+
-+static unsigned int mac_addr_used = 0;
-+static struct board_info board;
-+
-+/*
-+ * known 6348 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+static struct board_info __initdata board_livebox_blue5g = {
-+	.name				= "Livebox-blue-5g",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		  .has_phy		= 1,
-+		  .phy_id 		= 31,
-+	},
-+
-+	.has_ohci0			= 1,
-+	.has_pccard			= 1,
-+
-+	.has_dsp			= 0, /*TODO some Liveboxes have dsp*/
-+	.dsp = {
-+		.gpio_rst		= 6, /*FIXME eth1 shares gpio6 with dsp?*/
-+		.gpio_int		= 35,
-+		.cs			= 2,
-+		.ext_irq		= 2,
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "Livebox-blue-5g::adsl-fail",
-+			.gpio		= 0,
-+			.active_low	= 0,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "Livebox-blue-5g::adsl",
-+			.gpio		= 1,
-+		},
-+		{
-+			.name		= "Livebox-blue-5g::traffic",
-+			.gpio		= 2,
-+		},
-+		{
-+			.name		= "Livebox-blue-5g::phone",
-+			.gpio		= 3,
-+		},
-+		{
-+			.name		= "Livebox-blue-5g::wifi",
-+			.gpio		= 4,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc		= "BTN_1",
-+			.gpio		= 36,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= BTN_1,
-+			.debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc		= "BTN_2",
-+			.gpio		= 7,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= BTN_2,
-+			.debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+
-+	},
-+};
-+#endif
-+
-+/*
-+ * all boards
-+ */
-+static const struct board_info __initdata *bcm963xx_boards[] = {
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+	&board_livebox_blue5g
-+#endif
-+};
-+/*
-+ * return board name for /proc/cpuinfo
-+ */
-+const char *board_get_name(void)
-+{
-+	return board.name;
-+}
-+
-+/*
-+ * register & return a new board mac address
-+ */
-+static int board_get_mac_address(u8 *mac)
-+{
-+	u8 *p;
-+	int count;
-+
-+	memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
-+
-+	p = mac + ETH_ALEN - 1;
-+	count = mac_addr_used;
-+
-+	while (count--) {
-+		do {
-+			(*p)++;
-+			if (*p != 0)
-+				break;
-+			p--;
-+		} while (p != mac);
-+	}
-+
-+	if (p == mac) {
-+		printk(KERN_ERR PFX "unable to fetch mac address\n");
-+		return -ENODEV;
-+	}
-+        mac_addr_used++;
-+
-+	return 0;
-+}
-+
-+/*
-+ * early init callback
-+ */
-+#define LIVEBOX_GPIO_DETECT_MASK	0x000000ff
-+#define LIVEBOX_BOOT_ADDR		0x1e400000
-+
-+#define LIVEBOX_HW_BLUE5G_9		0x90
-+
-+void __init board_prom_init(void)
-+{
-+	u32 val;
-+	u8 hw_version;
-+
-+	/* Get hardware version */
-+	val = bcm_gpio_readl(GPIO_CTL_LO_REG);
-+	val &= ~LIVEBOX_GPIO_DETECT_MASK;
-+	bcm_gpio_writel(val, GPIO_CTL_LO_REG);
-+
-+	hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG) & LIVEBOX_GPIO_DETECT_MASK;
-+	switch (hw_version) {
-+	case LIVEBOX_HW_BLUE5G_9:
-+		printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
-+		memcpy(&board, bcm963xx_boards[0], sizeof(board));
-+		break;
-+	default:
-+		printk(KERN_INFO PFX "Unknown livebox version: %02x\n", hw_version);
-+		break;
-+	}
-+
-+	/* use default livebox configuration */
-+	memcpy(&board, bcm963xx_boards[0], sizeof(board));
-+
-+	/* setup pin multiplexing depending on board enabled device,
-+	 * this has to be done this early since PCI init is done
-+	 * inside arch_initcall */
-+	val = 0;
-+
-+#ifdef CONFIG_PCI
-+	if (board.has_pci) {
-+		bcm63xx_pci_enabled = 1;
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G2_PCI;
-+	}
-+#endif
-+	if (board.has_pccard) {
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+	}
-+
-+	if (board.has_enet0 && !board.enet0.use_internal_phy) {
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G3_EXT_MII |
-+				GPIO_MODE_6348_G0_EXT_MII;
-+	}
-+
-+	if (board.has_enet1 && !board.enet1.use_internal_phy) {
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G3_EXT_MII |
-+				GPIO_MODE_6348_G0_EXT_MII;
-+			printk(KERN_INFO PFX "resetting gpio6 for eth1...\n");
-+			gpio_request(6, "dsp_eth_rst");
-+			gpio_direction_output(6, 0);
-+			gpio_set_value(6, 1);
-+	}
-+
-+	bcm_gpio_writel(val, GPIO_MODE_REG);
-+}
-+
-+/*
-+ * second stage init callback, good time to panic if we couldn't
-+ * identify on which board we're running since early printk is working
-+ */
-+void __init board_setup(void)
-+{
-+	if (!board.name[0])
-+		panic("unable to detect bcm963xx board");
-+	printk(KERN_INFO PFX "board name: %s\n", board.name);
-+
-+	/* make sure we're running on expected cpu */
-+	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-+		panic("unexpected CPU for bcm963xx board");
-+}
-+
-+static struct physmap_flash_data flash_data = {
-+	.width			= 2,
-+};
-+
-+static struct resource mtd_resources[] = {
-+	{
-+		.start          = 0,    /* filled at runtime */
-+		.end            = 0,    /* filled at runtime */
-+		.flags          = IORESOURCE_MEM,
-+	}
-+};
-+
-+static struct platform_device mtd_dev = {
-+	.name			= "physmap-flash",
-+	.resource		= mtd_resources,
-+	.num_resources		= ARRAY_SIZE(mtd_resources),
-+	.dev			= {
-+		.platform_data	= &flash_data,
-+	},
-+};
-+
-+static struct gpio_led_platform_data bcm63xx_led_data;
-+
-+static struct platform_device bcm63xx_gpio_leds = {
-+	.name			= "leds-gpio",
-+	.id			= 0,
-+	.dev.platform_data	= &bcm63xx_led_data,
-+};
-+
-+static struct gpio_keys_platform_data bcm63xx_gpio_keys_data = {
-+	.poll_interval  = LIVEBOX_KEYS_POLL_INTERVAL,
-+};
-+
-+static struct platform_device bcm63xx_gpio_keys_device = {
-+	.name		= "gpio-keys-polled",
-+	.id		= 0,
-+	.dev.platform_data = &bcm63xx_gpio_keys_data,
-+};
-+
-+/*
-+ * third stage init callback, register all board devices.
-+ */
-+int __init board_register_devices(void)
-+{
-+	u32 val;
-+	int led_count = 0;
-+	int button_count = 0;
-+
-+	if (board.has_uart0)
-+		bcm63xx_uart_register(0);
-+
-+	if (board.has_uart1)
-+		bcm63xx_uart_register(1);
-+
-+	if (board.has_pccard)
-+		bcm63xx_pcmcia_register();
-+
-+	if (board.has_enet0 &&
-+	    !board_get_mac_address(board.enet0.mac_addr))
-+		bcm63xx_enet_register(0, &board.enet0);
-+
-+	if (board.has_enet1 &&
-+	    !board_get_mac_address(board.enet1.mac_addr))
-+		bcm63xx_enet_register(1, &board.enet1);
-+
-+	if (board.has_ehci0)
-+		bcm63xx_ehci_register();
-+
-+	if (board.has_ohci0)
-+		bcm63xx_ohci_register();
-+
-+	if (board.has_dsp)
-+		bcm63xx_dsp_register(&board.dsp);
-+
-+	bcm63xx_spi_register();
-+
-+	if (board.num_devs)
-+		platform_add_devices(board.devs, board.num_devs);
-+
-+	if (board.num_spis)
-+		spi_register_board_info(board.spis, board.num_spis);
-+
-+
-+	/* read base address of boot chip select (0) */
-+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+	val &= MPI_CSBASE_BASE_MASK;
-+	if (val != LIVEBOX_BOOT_ADDR)
-+		printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
-+			val, LIVEBOX_BOOT_ADDR);
-+	mtd_resources[0].start = LIVEBOX_BOOT_ADDR;
-+	mtd_resources[0].end = 0x1ebfffff;
-+
-+	platform_device_register(&mtd_dev);
-+
-+	/* count number of LEDs defined by this device */
-+	while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
-+		led_count++;
-+
-+	bcm63xx_led_data.num_leds = led_count;
-+	bcm63xx_led_data.leds = board.leds;
-+
-+	platform_device_register(&bcm63xx_gpio_leds);
-+
-+	/* count number of BUTTONs defined by this device */
-+	while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
-+		button_count++;
-+
-+	if (button_count) {
-+		bcm63xx_gpio_keys_data.nbuttons = button_count;
-+		bcm63xx_gpio_keys_data.buttons = board.buttons;
-+
-+		platform_device_register(&bcm63xx_gpio_keys_device);
-+	}
-+
-+	return 0;
-+}

target/linux/brcm63xx/patches-3.14/514-board_ct536_ct5621.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -545,6 +545,51 @@ static struct board_info __initdata boar
+@@ -531,6 +531,51 @@ static struct board_info __initdata boar
  };
  
  
@@ -52,7 +52,7 @@
  static struct board_info __initdata board_96348gw = {
  	.name				= "96348GW",
  	.expected_cpu_id		= 0x6348,
-@@ -2120,6 +2165,7 @@ static const struct board_info __initcon
+@@ -2106,6 +2151,7 @@ static const struct board_info __initcon
  	&board_96348sv,
  	&board_V2500V_BB,
  	&board_V2110,

target/linux/brcm63xx/patches-3.14/515-board_DWV-S0_fixes.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1315,6 +1315,8 @@ static struct board_info __initdata boar
+@@ -1301,6 +1301,8 @@ static struct board_info __initdata boar
  	.name				= "DWV-S0",
  	.expected_cpu_id		= 0x6358,
  
@@ -9,7 +9,7 @@
  	.has_enet0			= 1,
  	.has_enet1			= 1,
  	.has_pci			= 1,
-@@ -1330,6 +1332,7 @@ static struct board_info __initdata boar
+@@ -1316,6 +1318,7 @@ static struct board_info __initdata boar
  	},
  
  	.has_ohci0			= 1,

target/linux/brcm63xx/patches-3.14/516-board_96348A-122.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -590,6 +590,69 @@ static struct board_info __initdata boar
+@@ -576,6 +576,69 @@ static struct board_info __initdata boar
  	},
  };
  
@@ -70,7 +70,7 @@
  static struct board_info __initdata board_96348gw = {
  	.name				= "96348GW",
  	.expected_cpu_id		= 0x6348,
-@@ -2169,6 +2232,7 @@ static const struct board_info __initcon
+@@ -2155,6 +2218,7 @@ static const struct board_info __initcon
  	&board_V2500V_BB,
  	&board_V2110,
  	&board_ct536_ct5621,

target/linux/brcm63xx/patches-3.14/517-RTA1205W_16_uart_fixes.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -855,6 +855,7 @@ static struct board_info __initdata boar
+@@ -841,6 +841,7 @@ static struct board_info __initdata boar
  	.name				= "RTA1025W_16",
  	.expected_cpu_id		= 0x6348,
  

target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1153,6 +1153,46 @@ static struct board_info __initdata boar
+@@ -1139,6 +1139,46 @@ static struct board_info __initdata boar
  		},
  	},
  };
@@ -47,7 +47,7 @@
  #endif
  
  /*
-@@ -2234,6 +2274,7 @@ static const struct board_info __initcon
+@@ -2220,6 +2260,7 @@ static const struct board_info __initcon
  	&board_V2110,
  	&board_ct536_ct5621,
  	&board_96348A_122,

target/linux/brcm63xx/patches-3.14/520-bcm63xx-add-support-for-96368MVWG-board.patch

@@ -10,7 +10,7 @@ Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
 
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2238,6 +2238,85 @@ static struct board_info __initdata boar
+@@ -2224,6 +2224,85 @@ static struct board_info __initdata boar
  #endif
  
  /*
@@ -96,7 +96,7 @@ Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
   * all boards
   */
  static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -2292,6 +2371,10 @@ static const struct board_info __initcon
+@@ -2278,6 +2357,10 @@ static const struct board_info __initcon
  	&board_HW553,
  	&board_spw303v,
  #endif
@@ -106,8 +106,10 @@ Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
 +#endif
  };
  
- /*
-@@ -2473,12 +2556,25 @@ void __init board_prom_init(void)
+ static void __init boardid_fixup(u8 *boot_addr)
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -123,12 +123,25 @@ void __init board_early_setup(const stru
  		bcm63xx_pci_enabled = 1;
  		if (BCMCPU_IS_6348())
  			val |= GPIO_MODE_6348_G2_PCI;

target/linux/brcm63xx/patches-3.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch

@@ -9,7 +9,7 @@ Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
 
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2314,6 +2314,72 @@ static struct board_info __initdata boar
+@@ -2300,6 +2300,72 @@ static struct board_info __initdata boar
  	.has_ohci0 = 1,
  	.has_ehci0 = 1,
  };
@@ -82,7 +82,7 @@ Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
  #endif
  
  /*
-@@ -2374,6 +2440,7 @@ static const struct board_info __initcon
+@@ -2360,6 +2426,7 @@ static const struct board_info __initcon
  
  #ifdef CONFIG_BCM63XX_CPU_6368
  	&board_96368mvwg,

target/linux/brcm63xx/patches-3.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch

@@ -9,7 +9,7 @@ Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board
 
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -110,13 +110,45 @@ static struct board_info __initdata boar
+@@ -87,13 +87,45 @@ static struct board_info __initdata boar
  		.port_no		= 0,
  	},
  
@@ -56,7 +56,7 @@ Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board
  			.name		= "96328avng::power",
  			.gpio		= 4,
  			.active_low	= 1,
-@@ -133,7 +165,7 @@ static struct board_info __initdata boar
+@@ -110,7 +142,7 @@ static struct board_info __initdata boar
  			.active_low	= 1,
  		},
  		{

target/linux/brcm63xx/patches-3.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch

@@ -9,7 +9,7 @@ Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board
 
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -171,6 +171,76 @@ static struct board_info __initdata boar
+@@ -148,6 +148,76 @@ static struct board_info __initdata boar
  		},
  	},
  };
@@ -86,7 +86,7 @@ Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board
  #endif
  
  /*
-@@ -2423,6 +2493,7 @@ static const struct board_info __initcon
+@@ -2409,6 +2479,7 @@ static const struct board_info __initcon
  #endif
  #ifdef CONFIG_BCM63XX_CPU_6328
  	&board_96328avng,

target/linux/brcm63xx/patches-3.14/524-board_dsl_274xb_rev_f.patch

@@ -10,7 +10,7 @@ Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
 
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -241,6 +241,111 @@ static struct board_info __initdata boar
+@@ -218,6 +218,111 @@ static struct board_info __initdata boar
  
  	},
  };
@@ -122,7 +122,7 @@ Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
  #endif
  
  /*
-@@ -2494,6 +2599,7 @@ static const struct board_info __initcon
+@@ -2480,6 +2585,7 @@ static const struct board_info __initcon
  #ifdef CONFIG_BCM63XX_CPU_6328
  	&board_96328avng,
  	&board_963281TAN,

target/linux/brcm63xx/patches-3.14/525-board_96348w3.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1400,6 +1400,59 @@ static struct board_info __initdata boar
+@@ -1386,6 +1386,59 @@ static struct board_info __initdata boar
  	},
  };
  
@@ -60,7 +60,7 @@
  #endif
  
  /*
-@@ -2629,6 +2682,7 @@ static const struct board_info __initcon
+@@ -2615,6 +2668,7 @@ static const struct board_info __initcon
  	&board_ct536_ct5621,
  	&board_96348A_122,
  	&board_CPVA502plus,

target/linux/brcm63xx/patches-3.14/526-board_CT6373-1.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -59,6 +59,13 @@
+@@ -635,6 +635,13 @@ static struct board_info __initdata boar
  #define NB4_SPI_GPIO_CLK	6
  #define NB4_74HC64_GPIO(X)	(NB4_74X164_GPIO_BASE + (X))
  
@@ -11,10 +11,10 @@
 +#define CT6373_74HC64_GPIO(X)	(CT6373_74X164_GPIO_BASE + (X))
 +
 +
- static struct board_info board;
  
- /*
-@@ -2353,6 +2360,117 @@ static struct board_info __initdata boar
+ 	.has_ohci0 = 1,
+ 	.has_pccard = 1,
+@@ -2339,6 +2346,117 @@ static struct board_info __initdata boar
  	.num_spis = ARRAY_SIZE(nb4_spi_devices),
  };
  
@@ -132,7 +132,7 @@
  static struct board_info __initdata board_HW553 = {
  	.name                           = "HW553",
  	.expected_cpu_id                = 0x6358,
-@@ -2697,6 +2815,7 @@ static const struct board_info __initcon
+@@ -2683,6 +2801,7 @@ static const struct board_info __initcon
  	&board_nb4_ser_r2,
  	&board_nb4_fxc_r1,
  	&board_nb4_fxc_r2,

target/linux/brcm63xx/patches-3.14/527-board_dva-g3810bn-tl-1.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2613,6 +2613,73 @@ static struct board_info __initdata boar
+@@ -2599,6 +2599,73 @@ static struct board_info __initdata boar
  		},
  	}
  };
@@ -74,7 +74,7 @@
  #endif
  
  /*
-@@ -2818,6 +2885,7 @@ static const struct board_info __initcon
+@@ -2804,6 +2871,7 @@ static const struct board_info __initcon
  	&board_ct6373_1,
  	&board_HW553,
  	&board_spw303v,

target/linux/brcm63xx/patches-3.14/528-board_nb6.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -19,6 +19,7 @@
+@@ -18,6 +18,7 @@
  #if 0 /* FIXME: 3.14 removed non-DT support */
  #include <linux/spi/74x164.h>
  #endif
@@ -8,7 +8,7 @@
  #include <asm/addrspace.h>
  #include <bcm63xx_board.h>
  #include <bcm63xx_cpu.h>
-@@ -58,6 +59,8 @@
+@@ -634,6 +635,8 @@ static struct board_info __initdata boar
  #define NB4_SPI_GPIO_MOSI	7
  #define NB4_SPI_GPIO_CLK	6
  #define NB4_74HC64_GPIO(X)	(NB4_74X164_GPIO_BASE + (X))
@@ -17,7 +17,7 @@
  
  #define CT6373_PID_OFFSET		0xff80
  #define CT6373_74X164_GPIO_BASE	64
-@@ -2682,6 +2685,104 @@ static struct board_info __initdata boar
+@@ -2668,6 +2671,104 @@ static struct board_info __initdata boar
  };
  #endif
  
@@ -122,7 +122,7 @@
  /*
   * known 6368 boards
   */
-@@ -2888,6 +2989,10 @@ static const struct board_info __initcon
+@@ -2874,6 +2975,10 @@ static const struct board_info __initcon
  	&board_DVAG3810BN,
  #endif
  
@@ -133,7 +133,7 @@
  #ifdef CONFIG_BCM63XX_CPU_6368
  	&board_96368mvwg,
  	&board_96368mvngr,
-@@ -2955,6 +3060,11 @@ static void __init boardid_fixup(u8 *boo
+@@ -2895,6 +3000,11 @@ static void __init boardid_fixup(u8 *boo
  		}
  	}
  

target/linux/brcm63xx/patches-3.14/529-board_fast2604.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1068,6 +1068,57 @@ static struct board_info __initdata boar
+@@ -1054,6 +1054,57 @@ static struct board_info __initdata boar
  	.has_ehci0			= 1,
  };
  
@@ -58,7 +58,7 @@
  static struct board_info __initdata board_rta1025w_16 = {
  	.name				= "RTA1025W_16",
  	.expected_cpu_id		= 0x6348,
-@@ -2957,6 +3008,7 @@ static const struct board_info __initcon
+@@ -2943,6 +2994,7 @@ static const struct board_info __initcon
  	&board_96348gw_10,
  	&board_96348gw_11,
  	&board_FAST2404,

target/linux/brcm63xx/patches-3.14/530-board_963281T_TEF.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -252,6 +252,126 @@ static struct board_info __initdata boar
+@@ -220,6 +220,126 @@ static struct board_info __initdata boar
  	},
  };
  
@@ -127,7 +127,7 @@
  static struct board_info __initdata board_dsl_274xb_f1 = {
  	.name				= "AW4339U",
  	.expected_cpu_id		= 0x6328,
-@@ -2989,6 +3109,7 @@ static const struct board_info __initcon
+@@ -2975,6 +3095,7 @@ static const struct board_info __initcon
  #ifdef CONFIG_BCM63XX_CPU_6328
  	&board_96328avng,
  	&board_963281TAN,

target/linux/brcm63xx/patches-3.14/531-board_96328A-1441N1.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -182,6 +182,79 @@ static struct board_info __initdata boar
+@@ -150,6 +150,79 @@ static struct board_info __initdata boar
  	},
  };
  
@@ -80,7 +80,7 @@
  static struct board_info __initdata board_963281TAN = {
  	.name				= "963281TAN",
  	.expected_cpu_id		= 0x6328,
-@@ -3108,6 +3181,7 @@ static const struct board_info __initcon
+@@ -3094,6 +3167,7 @@ static const struct board_info __initcon
  #endif
  #ifdef CONFIG_BCM63XX_CPU_6328
  	&board_96328avng,

target/linux/brcm63xx/patches-3.14/532-board_96328a-1241N.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -182,6 +182,73 @@ static struct board_info __initdata boar
+@@ -150,6 +150,73 @@ static struct board_info __initdata boar
  	},
  };
  
@@ -74,7 +74,7 @@
  static struct board_info __initdata board_96328A_1441N1 = {
  	.name					= "96328A-1441N1",
  	.expected_cpu_id			= 0x6328,
-@@ -3181,6 +3248,7 @@ static const struct board_info __initcon
+@@ -3167,6 +3234,7 @@ static const struct board_info __initcon
  #endif
  #ifdef CONFIG_BCM63XX_CPU_6328
  	&board_96328avng,

target/linux/brcm63xx/patches-3.14/533-board_rta770bw.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -790,6 +790,55 @@ static struct board_info __initdata boar
+@@ -758,6 +758,55 @@ static struct board_info __initdata boar
  
  	.has_uart0			= 1,
  };
@@ -56,7 +56,7 @@
  #endif
  
  /*
-@@ -3262,6 +3311,7 @@ static const struct board_info __initcon
+@@ -3248,6 +3297,7 @@ static const struct board_info __initcon
  #endif
  #ifdef CONFIG_BCM63XX_CPU_6345
  	&board_96345gw2,

target/linux/brcm63xx/patches-3.14/534-board_hw556.patch

@@ -1,6 +1,14 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2911,6 +2911,492 @@ static struct board_info __initdata boar
+@@ -12,6 +12,7 @@
+ #include <linux/string.h>
+ #include <linux/gpio_keys.h>
+ #include <linux/input.h>
++#include <linux/pci_ids.h>
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
+ #include <linux/spi/spi_gpio.h>
+@@ -2897,6 +2898,492 @@ static struct board_info __initdata boar
  	},
  };
  
@@ -493,7 +501,7 @@
   /* T-Home Speedport W 303V Typ B */
  static struct board_info __initdata board_spw303v = {
  	.name			= "96358-502V",
-@@ -3350,6 +3836,10 @@ static const struct board_info __initcon
+@@ -3336,6 +3823,10 @@ static const struct board_info __initcon
  	&board_nb4_fxc_r2,
  	&board_ct6373_1,
  	&board_HW553,
@@ -504,7 +512,7 @@
  	&board_spw303v,
  	&board_DVAG3810BN,
  #endif
-@@ -3415,13 +3905,37 @@ static void __init boardid_fixup(u8 *boo
+@@ -3355,13 +3846,37 @@ static void __init boardid_fixup(u8 *boo
  	struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
  	char *board_name = (char *)bcm63xx_nvram_get_name();
  

target/linux/brcm63xx/patches-3.14/535-board_rta770w.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -778,6 +778,60 @@ static struct board_info __initdata boar
+@@ -808,6 +808,60 @@ static struct board_info __initdata boar
  		},
  	},
  };
@@ -61,7 +61,7 @@
  #endif
  
  /*
-@@ -3798,6 +3852,7 @@ static const struct board_info __initcon
+@@ -3785,6 +3839,7 @@ static const struct board_info __initcon
  #ifdef CONFIG_BCM63XX_CPU_6345
  	&board_96345gw2,
  	&board_rta770bw,

target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch

@@ -12,7 +12,7 @@ Signed-off-by: Marcin Jurkowski <[email protected]>
 ---
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1482,6 +1482,122 @@ static struct board_info __initdata boar
+@@ -1469,6 +1469,122 @@ static struct board_info __initdata boar
  	},
  };
  
@@ -135,7 +135,7 @@ Signed-off-by: Marcin Jurkowski <[email protected]>
  static struct board_info __initdata board_rta1025w_16 = {
  	.name				= "RTA1025W_16",
  	.expected_cpu_id		= 0x6348,
-@@ -3842,6 +3958,7 @@ static const struct board_info __initcon
+@@ -3829,6 +3945,7 @@ static const struct board_info __initcon
  	&board_963281TAN,
  	&board_963281T_TEF,
  	&board_dsl_274xb_f1,

target/linux/brcm63xx/patches-3.14/537-board_fast2504n.patch

@@ -6,7 +6,7 @@ Signed-off-by: Max Staudt <[email protected]>
 ---
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -3797,6 +3797,96 @@ static struct board_info __initdata boar
+@@ -3784,6 +3784,96 @@ static struct board_info __initdata boar
  	.devs = nb6_devices,
  	.num_devs = ARRAY_SIZE(nb6_devices),
  };
@@ -103,7 +103,7 @@ Signed-off-by: Max Staudt <[email protected]>
  #endif
  
  /*
-@@ -4018,6 +4108,7 @@ static const struct board_info __initcon
+@@ -4005,6 +4095,7 @@ static const struct board_info __initcon
  
  #ifdef CONFIG_BCM63XX_CPU_6362
  	&board_nb6,

target/linux/brcm63xx/patches-3.14/550-alice_gate2_leds.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2213,6 +2213,99 @@ static struct board_info __initdata boar
+@@ -2200,6 +2200,99 @@ static struct board_info __initdata boar
  
  	.has_ohci0 = 1,
  	.has_ehci0 = 1,

target/linux/brcm63xx/patches-3.14/551-96348gw_a_leds.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1657,6 +1657,19 @@ static struct board_info __initdata boar
+@@ -1644,6 +1644,19 @@ static struct board_info __initdata boar
  	},
  
  	.has_ohci0 = 1,

target/linux/brcm63xx/patches-3.14/552-board_96348gw-10_reset_button.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1001,6 +1001,17 @@ static struct board_info __initdata boar
+@@ -970,6 +970,17 @@ static struct board_info __initdata boar
  			.active_low	= 1,
  		},
  	},

target/linux/brcm63xx/patches-3.14/553-boards_probe_switch.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -629,6 +629,8 @@ static struct board_info __initdata boar
+@@ -598,6 +598,8 @@ static struct board_info __initdata boar
  	.has_uart0			= 1,
  	.has_enet0			= 1,
  	.enet0 = {
@@ -9,7 +9,7 @@
  		.force_speed_100	= 1,
  		.force_duplex_full	= 1,
  	},
-@@ -672,6 +674,8 @@ static struct board_info __initdata boar
+@@ -641,6 +643,8 @@ static struct board_info __initdata boar
  	.has_uart0			= 1,
  	.has_enet0			= 1,
  	.enet0 = {
@@ -18,7 +18,7 @@
  		.force_speed_100	= 1,
  		.force_duplex_full	= 1,
  	},
-@@ -957,6 +961,8 @@ static struct board_info __initdata boar
+@@ -926,6 +930,8 @@ static struct board_info __initdata boar
  		.use_internal_phy	= 1,
  	},
  	.enet1 = {
@@ -27,7 +27,7 @@
  		.force_speed_100	= 1,
  		.force_duplex_full	= 1,
  	},
-@@ -1029,6 +1035,8 @@ static struct board_info __initdata boar
+@@ -998,6 +1004,8 @@ static struct board_info __initdata boar
  	},
  
  	.enet1 = {
@@ -36,7 +36,7 @@
  		.force_speed_100	= 1,
  		.force_duplex_full	= 1,
  	},
-@@ -1258,6 +1266,8 @@ static struct board_info __initdata boar
+@@ -1245,6 +1253,8 @@ static struct board_info __initdata boar
  		.use_internal_phy	= 1,
  	},
  	.enet1 = {
@@ -45,7 +45,7 @@
  		.force_speed_100	= 1,
  		.force_duplex_full	= 1,
  	},
-@@ -1433,6 +1443,8 @@ static struct board_info __initdata boar
+@@ -1420,6 +1430,8 @@ static struct board_info __initdata boar
  	},
  
  	.enet1 = {
@@ -54,7 +54,7 @@
  		.force_speed_100	= 1,
  		.force_duplex_full	= 1,
  	},
-@@ -1623,6 +1635,8 @@ static struct board_info __initdata boar
+@@ -1610,6 +1622,8 @@ static struct board_info __initdata boar
  		.use_internal_phy	= 1,
  	},
  	.enet1 = {
@@ -63,7 +63,7 @@
  		.force_speed_100	= 1,
  		.force_duplex_full	= 1,
  	},
-@@ -1644,6 +1658,8 @@ static struct board_info __initdata boar
+@@ -1631,6 +1645,8 @@ static struct board_info __initdata boar
  		.use_internal_phy	= 1,
  	},
  	.enet1 = {
@@ -72,7 +72,7 @@
  		.force_speed_100	= 1,
  		.force_duplex_full	= 1,
  	},
-@@ -1663,6 +1679,8 @@ static struct board_info __initdata boar
+@@ -1650,6 +1666,8 @@ static struct board_info __initdata boar
  		.use_internal_phy	= 1,
  	},
  	.enet1 = {
@@ -81,7 +81,7 @@
  		.force_speed_100	= 1,
  		.force_duplex_full	= 1,
  	},
-@@ -2038,6 +2056,8 @@ static struct board_info __initdata boar
+@@ -2025,6 +2043,8 @@ static struct board_info __initdata boar
  	},
  
  	.enet1 = {
@@ -90,7 +90,7 @@
  		.force_speed_100	= 1,
  		.force_duplex_full	= 1,
  	},
-@@ -2090,6 +2110,8 @@ static struct board_info __initdata boar
+@@ -2077,6 +2097,8 @@ static struct board_info __initdata boar
  	},
  
  	.enet1 = {
@@ -99,7 +99,7 @@
  		.force_speed_100	= 1,
  		.force_duplex_full	= 1,
  	},
-@@ -2231,6 +2253,8 @@ static struct board_info __initdata boar
+@@ -2218,6 +2240,8 @@ static struct board_info __initdata boar
  	},
  
  	.enet1 = {
@@ -108,7 +108,7 @@
  		.force_speed_100	= 1,
  		.force_duplex_full	= 1,
  	},
-@@ -2348,6 +2372,8 @@ static struct board_info __initdata boar
+@@ -2335,6 +2359,8 @@ static struct board_info __initdata boar
  	},
  
  	.enet1 = {

target/linux/brcm63xx/patches-3.14/554-board_DWVS0_leds_buttons.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2380,6 +2380,94 @@ static struct board_info __initdata boar
+@@ -2367,6 +2367,94 @@ static struct board_info __initdata boar
  
  	.has_ohci0			= 1,
  	.has_ehci0			= 1,

target/linux/brcm63xx/patches-3.14/555-board_96318ref.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -104,6 +104,93 @@ static struct board_info __initdata boar
+@@ -73,6 +73,93 @@ static struct board_info __initdata boar
  #endif
  
  /*
@@ -94,7 +94,7 @@
   * known 6328 boards
   */
  #ifdef CONFIG_BCM63XX_CPU_6328
-@@ -4272,6 +4359,9 @@ static const struct board_info __initcon
+@@ -4259,6 +4346,9 @@ static const struct board_info __initcon
  #ifdef CONFIG_BCM63XX_CPU_3368
  	&board_cvg834g,
  #endif

target/linux/brcm63xx/patches-3.14/556-board_96318ref_p300.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -188,6 +188,94 @@ static struct board_info __initdata boar
+@@ -157,6 +157,94 @@ static struct board_info __initdata boar
  		},
  	},
  };
@@ -95,7 +95,7 @@
  #endif
  
  /*
-@@ -4361,6 +4449,7 @@ static const struct board_info __initcon
+@@ -4348,6 +4436,7 @@ static const struct board_info __initcon
  #endif
  #ifdef CONFIG_BCM63XX_CPU_6318
  	&board_96318ref,

target/linux/brcm63xx/patches-3.14/557-board_bcm963269bhr.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -4441,6 +4441,75 @@ static struct board_info __initdata boar
+@@ -4428,6 +4428,75 @@ static struct board_info __initdata boar
  #endif
  
  /*
@@ -76,7 +76,7 @@
   * all boards
   */
  static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -4525,6 +4594,9 @@ static const struct board_info __initcon
+@@ -4512,6 +4581,9 @@ static const struct board_info __initcon
  	&board_96368mvwg,
  	&board_96368mvngr,
  #endif
@@ -85,4 +85,4 @@
 +#endif
  };
  
- /*
+ static void __init boardid_fixup(u8 *boot_addr)

target/linux/brcm63xx/patches-3.14/558-board_AR1004G.patch

@@ -8,7 +8,7 @@ Signed-off-by: Adrian Feliks <[email protected]>
 ---
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2210,6 +2210,51 @@ static struct board_info __initdata boar
+@@ -2197,6 +2197,51 @@ static struct board_info __initdata boar
  	},
  };
  
@@ -60,7 +60,7 @@ Signed-off-by: Adrian Feliks <[email protected]>
  #endif
  
  /*
-@@ -4561,6 +4606,7 @@ static const struct board_info __initcon
+@@ -4548,6 +4593,7 @@ static const struct board_info __initcon
  	&board_96348A_122,
  	&board_CPVA502plus,
  	&board_96348W3,

target/linux/brcm63xx/patches-3.14/559-board_vw6339gu.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -4552,6 +4552,108 @@ static struct board_info __initdata boar
+@@ -4539,6 +4539,108 @@ static struct board_info __initdata boar
  		},
  	},
  };
@@ -109,7 +109,7 @@
  #endif
  
  /*
-@@ -4642,6 +4744,7 @@ static const struct board_info __initcon
+@@ -4629,6 +4731,7 @@ static const struct board_info __initcon
  #endif
  #ifdef CONFIG_BCM63XX_CPU_63268
  	&board_963269bhr,

target/linux/brcm63xx/patches-3.14/560-board_963268gu_p300.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -4489,6 +4489,131 @@ static struct board_info __initdata boar
+@@ -4476,6 +4476,131 @@ static struct board_info __initdata boar
   * known 63268/63269 boards
   */
  #ifdef CONFIG_BCM63XX_CPU_63268
@@ -132,7 +132,7 @@
  static struct board_info __initdata board_963269bhr = {
  	.name				= "963269BHR",
  	.expected_cpu_id		= 0x63268,
-@@ -4743,6 +4868,7 @@ static const struct board_info __initcon
+@@ -4730,6 +4855,7 @@ static const struct board_info __initcon
  	&board_96368mvngr,
  #endif
  #ifdef CONFIG_BCM63XX_CPU_63268

target/linux/brcm63xx/patches-3.14/801-ssb_export_fallback_sprom.patch

@@ -1,14 +1,14 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -14,6 +14,7 @@
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -13,6 +13,7 @@
+ #include <linux/platform_device.h>
  #include <linux/ssb/ssb.h>
  #include <linux/gpio_keys.h>
- #include <linux/input.h>
 +#include <linux/export.h>
  #include <linux/spi/spi.h>
- #include <linux/spi/spi_gpio.h>
- #if 0 /* FIXME: 3.14 removed non-DT support */
-@@ -4879,7 +4880,7 @@ static const struct board_info __initcon
+ #include <asm/addrspace.h>
+ #include <asm/bootinfo.h>
+@@ -49,7 +50,7 @@ static struct board_info board;
   * bcm4318 WLAN work
   */
  #ifdef CONFIG_SSB_PCIHOST
@@ -17,7 +17,7 @@
  	.revision		= 0x02,
  	.board_rev		= 0x17,
  	.country_code		= 0x0,
-@@ -4899,6 +4900,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -69,6 +70,7 @@ static struct ssb_sprom bcm63xx_sprom =
  	.boardflags_lo		= 0x2848,
  	.boardflags_hi		= 0x0000,
  };