ath79: fix sorting and harmonize indent in tiny board.d files

This seems to have been overlooked when splitting base files.

Signed-off-by: Adrian Schmutzler <[email protected]>

target/linux/ath79/tiny/base-files/etc/board.d/01_leds

@@ -33,16 +33,6 @@ on,n150r)
 	ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
 	ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
 	;;
-tplink,tl-wr841-v9|\
-tplink,tl-wr841-v10|\
-tplink,tl-wr841-v11|\
-tplink,tl-wr841-v12)
-	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
-	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
-	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
-	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
-	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
-	;;
 tplink,tl-mr3020-v1|\
 tplink,tl-mr3040-v2)
 	ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
@@ -69,6 +59,16 @@ tplink,tl-wr941-v4)
 	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x08"
 	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10"
 	;;
+tplink,tl-wr841-v9|\
+tplink,tl-wr841-v10|\
+tplink,tl-wr841-v11|\
+tplink,tl-wr841-v12)
+	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
+	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
+	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+	;;
 tplink,tl-wr940n-v3|\
 tplink,tl-wr940n-v4|\
 tplink,tl-wr941nd-v6)

target/linux/ath79/tiny/base-files/etc/board.d/02_network

@@ -8,6 +8,25 @@ ath79_setup_interfaces()
 	local board="$1"
 
 	case "$board" in
+	buffalo,whr-g301n)
+		ucidef_set_interface_wan "eth0"
+		ucidef_add_switch "switch0" \
+			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+		;;
+	netgear,wnr1000-v2|\
+	netgear,wnr2000-v3|\
+	netgear,wnr612-v2|\
+	on,n150r|\
+	tplink,tl-wr740n-v1|\
+	tplink,tl-wr740n-v3|\
+	tplink,tl-wr741-v1|\
+	tplink,tl-wr743nd-v1|\
+	tplink,tl-wr841-v5|\
+	tplink,tl-wr941-v4)
+		ucidef_set_interface_wan "eth0"
+		ucidef_add_switch "switch0" \
+			"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
+		;;
 	pqi,air-pen|\
 	tplink,tl-mr10u|\
 	tplink,tl-mr3020-v1|\
@@ -16,11 +35,6 @@ ath79_setup_interfaces()
 	tplink,tl-wr703n)
 		ucidef_set_interface_lan "eth0"
 		;;
-	buffalo,whr-g301n)
-		ucidef_set_interface_wan "eth0"
-		ucidef_add_switch "switch0" \
-			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
 	tplink,tl-mr3220-v1|\
 	tplink,tl-mr3420-v1|\
 	tplink,tl-wr841-v7|\
@@ -35,24 +49,6 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
 		;;
-	netgear,wnr1000-v2|\
-	netgear,wnr2000-v3|\
-	netgear,wnr612-v2|\
-	on,n150r|\
-	tplink,tl-wr740n-v1|\
-	tplink,tl-wr740n-v3|\
-	tplink,tl-wr741-v1|\
-	tplink,tl-wr743nd-v1|\
-	tplink,tl-wr841-v5|\
-	tplink,tl-wr941-v4)
-		ucidef_set_interface_wan "eth0"
-		ucidef_add_switch "switch0" \
-		"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
-		;;
-	tplink,tl-wr941n-v7-cn)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
-		;;
 	tplink,tl-mr3420-v2|\
 	tplink,tl-wr740n-v4|\
 	tplink,tl-wr741nd-v4|\
@@ -64,6 +60,10 @@ ath79_setup_interfaces()
 	tplink,tl-wr941-v2)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
 		;;
+	tplink,tl-wr941n-v7-cn)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
+		;;
 	*)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		;;