ath79: use ar8216 for builtin switch

Signed-off-by: Chuanhong Guo <[email protected]>

target/linux/ath79/dts/ar7240.dtsi

@@ -39,11 +39,12 @@
 	builtin-switch;
 
 	builtin_switch: switch0@1f {
-		compatible = "qca,ar8216-builtin";
+		compatible = "qca,ar7240sw";
 
 		reg = <0x1f>;
 		resets = <&rst 8>;
 		reset-names = "switch";
+		qca,mib-poll-interval = <500>;
 
 		mdio-bus {
 			#address-cells = <1>;

target/linux/ath79/dts/ar7241.dtsi

@@ -58,11 +58,12 @@
 	builtin-switch;
 
 	builtin_switch: switch0@1f {
-		compatible = "qca,ar8216-builtin";
+		compatible = "qca,ar7240sw";
 
 		reg = <0x1f>;
 		resets = <&rst 8>;
 		reset-names = "switch";
+		qca,mib-poll-interval = <500>;
 
 		mdio-bus {
 			#address-cells = <1>;

target/linux/ath79/dts/ar7242.dtsi

@@ -61,12 +61,13 @@
 	builtin-switch;
 
 	builtin_switch: switch0@1f {
-		compatible = "qca,ar8216-builtin";
+		compatible = "qca,ar7240sw";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x1f>;
 		resets = <&rst 8>;
 		reset-names = "switch";
+		qca,mib-poll-interval = <500>;
 	};
 };
 

target/linux/ath79/dts/ar9330.dtsi

@@ -173,10 +173,11 @@
 	builtin-switch;
 
 	builtin_switch: switch0@1f {
-		compatible = "qca,ar8216-builtin";
+		compatible = "qca,ar7240sw";
 		reg = <0x1f>;
 		resets = <&rst 8>;
 		reset-names = "switch";
+		qca,mib-poll-interval = <500>;
 
 		mdio-bus {
 			#address-cells = <1>;

target/linux/ath79/dts/ar934x.dtsi

@@ -213,13 +213,14 @@
 	builtin-switch;
 
 	builtin_switch: switch0@1f {
-		compatible = "qca,ar8229-builtin";
+		compatible = "qca,ar8229";
 
 		reg = <0x1f>;
 		resets = <&rst 8>;
 		reset-names = "switch";
 		phy-mode = "gmii";
-		phy4-mii-enable;
+		qca,mib-poll-interval = <500>;
+		qca,phy4-mii-enable;
 
 		mdio-bus {
 			#address-cells = <1>;

target/linux/ath79/dts/qca953x.dtsi

@@ -245,13 +245,14 @@
 	builtin-switch;
 
 	builtin_switch: switch0@1f {
-		compatible = "qca,ar8229-builtin";
+		compatible = "qca,ar8229";
 
 		reg = <0x1f>;
 		resets = <&rst 8>;
 		reset-names = "switch";
 		phy-mode = "gmii";
-		phy4-mii-enable;
+		qca,phy4-mii-enable;
+		qca,mib-poll-interval = <500>;
 
 		mdio-bus {
 			#address-cells = <1>;

target/linux/ath79/dts/qca956x.dtsi

@@ -274,12 +274,13 @@
 	builtin-switch;
 
 	builtin_switch: switch0@1f {
-		compatible = "qca,ar8229-builtin";
+		compatible = "qca,ar8229";
 		reg = <0x1f>;
 		resets = <&rst 8>;
 		reset-names = "switch";
 		phy-mode = "gmii";
-		phy4-mii-enable;
+		qca,phy4-mii-enable;
+		qca,mib-poll-interval = <500>;
 
 		mdio-bus {
 			#address-cells = <1>;