Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.

SVN-Revision: 24442

target/linux/brcm63xx/base-files/etc/defconfig/CT536_CT5621/network

@@ -0,0 +1,14 @@
+# Copyright (C) 2006 OpenWrt.org
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth0
+	option type 	bridge
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0

target/linux/brcm63xx/base-files/lib/brcm63xx.sh

@@ -34,6 +34,11 @@ brcm63xx_detect() {
 		brcm63xx_has_reset_button="true"
 		ifname=eth1
 		;;
+	"bcm63xx/CT536_CT5621 "*)
+		status_led="power"
+		brcm63xx_has_reset_button="true"
+		ifname=eth0
+		;;
 	"bcm63xx/96358GW "* | "bcm63xx/SPW500V "*)
 		status_led="power:green"
 		brcm63xx_has_reset_button="true"

target/linux/brcm63xx/image/Makefile

@@ -128,6 +128,8 @@ define Image/Build
 	$(call Image/Build/CFE,$(1),96348GW,6348,96348GW-bc221,,--layoutver 5)
 	$(call Image/Build/CFE,$(1),6338GW,6338,6338GW-generic,,)
 	$(call Image/Build/CFE,$(1),6338W,6338,6338W-generic,,)
+	$(call Image/Build/CFE,$(1),96348GW-11,6348,96348GW-11-gen)
+	$(call Image/Build/CFE,$(1),96348GW-10,6348,96348GW-10-gen)
 
 	# BT Voyager V210_BTR
 	$(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,--layoutver 5)
@@ -152,7 +154,7 @@ define Image/Build
 	# Neufbox4
 	$(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION))
 	# Comtrend 536, 5621
-	$(call Image/Build/CFE,$(1),96348GW-11,6348,CT536_CT5621)
+	$(call Image/Build/CFEFIXUP,$(1),96348GW-11,6348,CT536_CT5621)
 	# Davolink DV201AMR
 	$(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
 	# USR 9108

target/linux/brcm63xx/patches-2.6.35/440-new_96348gw-11_leds.patch

@@ -0,0 +1,60 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -364,6 +364,49 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_ct536_ct5621 = {
++	.name				= "CT536_CT5621",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet0			= 0,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet1 = {
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.has_ohci0 = 1,
++	.has_pccard = 1,
++	.has_ehci0 = 1,
++
++	.leds = {
++		{
++			.name		= "adsl-fail",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "power",
++			.gpio		= 0,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++	},
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 33,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.threshold	= 3,
++		},
++	},
++};
++
+ static struct board_info __initdata board_96348gw = {
+ 	.name				= "96348GW",
+ 	.expected_cpu_id		= 0x6348,
+@@ -1642,6 +1685,7 @@ static const struct board_info __initdat
+ 	&board_rta1025w_16,
+ 	&board_96348_D4PW,
+ 	&board_spw500v,
++	&board_ct536_ct5621,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358