lantiq: ltq-ptm: set carrier status

Principal purpose is to prevent the error message

  ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime

which is printed at least once per second to the serial console, if the
ptm interface is not in showtime, but a processes already sends
packages over that interface. This happens for adsl as well as vdsl
over ptm.

It's pppd which sends packages over the ptm device before in showtime.
As far as I can see, pppd is started unconditionally since netif can
not gather the link status of the ptm network interface.

Signed-off-by: Mathias Kresin <[email protected]>

SVN-Revision: 47917

package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_adsl.c

@@ -43,6 +43,7 @@
 #include <linux/ioctl.h>
 #include <linux/etherdevice.h>
 #include <linux/interrupt.h>
+#include <linux/netdevice.h>
 #include <asm/io.h>
 
 /*
@@ -277,6 +278,10 @@ static int g_showtime = 0;
 
 static void ptm_setup(struct net_device *dev, int ndev)
 {
+#if defined(CONFIG_IFXMIPS_DSL_CPE_MEI) || defined(CONFIG_IFXMIPS_DSL_CPE_MEI_MODULE)
+    netif_carrier_off(dev);
+#endif
+
     /*  hook network operations */
     dev->netdev_ops      = &g_ptm_netdev_ops;
     netif_napi_add(dev, &g_ptm_priv_data.itf[ndev].napi, ptm_napi_poll, 25);
@@ -1384,9 +1389,13 @@ static INLINE void init_tables(void)
 
 static int ptm_showtime_enter(struct port_cell_info *port_cell, void *xdata_addr)
 {
+    int i;
 
     g_showtime = 1;
 
+    for ( i = 0; i < ARRAY_SIZE(g_net_dev); i++ )
+        netif_carrier_on(g_net_dev[i]);
+
     printk("enter showtime\n");
 
     return 0;
@@ -1394,9 +1403,14 @@ static int ptm_showtime_enter(struct port_cell_info *port_cell, void *xdata_addr
 
 static int ptm_showtime_exit(void)
 {
+    int i;
+
     if ( !g_showtime )
         return -1;
 
+    for ( i = 0; i < ARRAY_SIZE(g_net_dev); i++ )
+        netif_carrier_off(g_net_dev[i]);
+
     g_showtime = 0;
 
     printk("leave showtime\n");

package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_vdsl.c

@@ -32,6 +32,7 @@
 #include <linux/ioctl.h>
 #include <linux/etherdevice.h>
 #include <linux/interrupt.h>
+#include <linux/netdevice.h>
 
 #include "ifxmips_ptm_vdsl.h"
 #include <lantiq_soc.h>
@@ -136,6 +137,8 @@ unsigned int ifx_ptm_dbg_enable = DBG_ENABLE_MASK_ERR;
 
 static void ptm_setup(struct net_device *dev, int ndev)
 {
+    netif_carrier_off(dev);
+
     dev->netdev_ops      = &g_ptm_netdev_ops;
     netif_napi_add(dev, &g_ptm_priv_data.itf[ndev].napi, ptm_napi_poll, 16);
     dev->watchdog_timeo  = ETH_WATCHDOG_TIMEOUT;
@@ -888,6 +891,8 @@ static inline void clear_tables(void)
 
 static int ptm_showtime_enter(struct port_cell_info *port_cell, void *xdata_addr)
 {
+	int i;
+
 	ASSERT(port_cell != NULL, "port_cell is NULL");
 	ASSERT(xdata_addr != NULL, "xdata_addr is NULL");
 
@@ -896,6 +901,9 @@ static int ptm_showtime_enter(struct port_cell_info *port_cell, void *xdata_addr
 
 	g_showtime = 1;
 
+	for ( i = 0; i < ARRAY_SIZE(g_net_dev); i++ )
+		netif_carrier_on(g_net_dev[i]);
+
 	IFX_REG_W32(0x0F, UTP_CFG);
 
 	//#ifdef CONFIG_VR9
@@ -909,6 +917,8 @@ static int ptm_showtime_enter(struct port_cell_info *port_cell, void *xdata_addr
 
 static int ptm_showtime_exit(void)
 {
+	int i;
+
 	if ( !g_showtime )
 		return -1;
 
@@ -918,6 +928,9 @@ static int ptm_showtime_exit(void)
 
 	IFX_REG_W32(0x00, UTP_CFG);
 
+	for ( i = 0; i < ARRAY_SIZE(g_net_dev); i++ )
+		netif_carrier_off(g_net_dev[i]);
+
 	g_showtime = 0;
 
 	//  TODO: ReTX clean state