mediatek: filogic: adapt BananaPi-R4 for use with upstream DT

 * the variant with 2.5G PHY instead of LAN SFP is called '2p5'
   upstream and 'poe' in our downstream Linux 6.6 DT. Use the right
   DTS depending on the kernel version and set an additional
   compatible.

 * drop additional DT overlay for WiFi.
   The final version of the board uses a physical switch for the 12V
   power of the WiFi module and the I2C EEPROM of the module always
   comes empty (instead of with a MAC address).

Signed-off-by: Daniel Golle <[email protected]>

target/linux/mediatek/base-files/etc/uci-defaults/99_fwenv-store-ethaddr.sh

@@ -12,6 +12,7 @@ unielec,u7623-02)
 bananapi,bpi-r3|\
 bananapi,bpi-r3-mini|\
 bananapi,bpi-r4|\
+bananapi,bpi-r4-2g5|\
 bananapi,bpi-r4-poe)
 	[ -z "$(fw_printenv -n ethaddr 2>/dev/null)" ] &&
 		fw_setenv ethaddr "$(cat /sys/class/net/eth0/address)"

target/linux/mediatek/filogic/base-files/etc/board.d/01_leds

@@ -42,6 +42,7 @@ bananapi,bpi-r3-mini)
 	ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan-2" "phy1-ap0"
 	;;
 bananapi,bpi-r4|\
+bananapi,bpi-r4-2g5|\
 bananapi,bpi-r4-poe)
 	ucidef_set_led_netdev "wan" "wan" "mt7530-0:00:green:wan" "wan" "link tx rx"
 	ucidef_set_led_netdev "lan1" "lan1" "mt7530-0:01:green:lan" "lan1" "link tx rx"

target/linux/mediatek/filogic/base-files/etc/board.d/02_network

@@ -79,6 +79,7 @@ mediatek_setup_interfaces()
 	bananapi,bpi-r4)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 sfp-lan" "wan sfp-wan"
 		;;
+	bananapi,bpi-r4-2g5|\
 	bananapi,bpi-r4-poe)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan sfp-wan"
 		;;

target/linux/mediatek/filogic/base-files/etc/board.d/05_compat-version

@@ -12,6 +12,7 @@ case "$(board_name)" in
 		ucidef_set_compat_version "1.1"
 		;;
 	bananapi,bpi-r4|\
+	bananapi,bpi-r4-2g5|\
 	bananapi,bpi-r4-poe)
 		ucidef_set_compat_version "1.1"
 		;;

target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac

@@ -55,6 +55,7 @@ case "$board" in
 		[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
 		;;
 	bananapi,bpi-r4|\
+	bananapi,bpi-r4-2g5|\
 	bananapi,bpi-r4-poe)
 		addr=$(cat /sys/class/net/eth0/address)
 		[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress

target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh

@@ -71,6 +71,7 @@ platform_do_upgrade() {
 	bananapi,bpi-r3|\
 	bananapi,bpi-r3-mini|\
 	bananapi,bpi-r4|\
+	bananapi,bpi-r4-2g5|\
 	bananapi,bpi-r4-poe|\
 	cmcc,a10-ubootmod|\
 	cmcc,rax3000m|\
@@ -203,6 +204,7 @@ platform_check_image() {
 	bananapi,bpi-r3|\
 	bananapi,bpi-r3-mini|\
 	bananapi,bpi-r4|\
+	bananapi,bpi-r4-2g5|\
 	bananapi,bpi-r4-poe|\
 	cmcc,a10-ubootmod|\
 	cmcc,rax3000m|\
@@ -254,6 +256,7 @@ platform_copy_config() {
 	bananapi,bpi-r3|\
 	bananapi,bpi-r3-mini|\
 	bananapi,bpi-r4|\
+	bananapi,bpi-r4-2g5|\
 	bananapi,bpi-r4-poe|\
 	cmcc,rax3000m)
 		if [ "$CI_METHOD" = "emmc" ]; then

target/linux/mediatek/image/filogic.mk

@@ -460,7 +460,7 @@ define Device/bananapi_bpi-r4-common
   DEVICE_VENDOR := Bananapi
   DEVICE_DTS_DIR := $(DTS_DIR)/
   DEVICE_DTS_LOADADDR := 0x45f00000
-  DEVICE_DTS_OVERLAY:= mt7988a-bananapi-bpi-r4-emmc mt7988a-bananapi-bpi-r4-rtc mt7988a-bananapi-bpi-r4-sd mt7988a-bananapi-bpi-r4-wifi-mt7996a
+  DEVICE_DTS_OVERLAY:= mt7988a-bananapi-bpi-r4-emmc mt7988a-bananapi-bpi-r4-rtc mt7988a-bananapi-bpi-r4-sd
   DEVICE_DTC_FLAGS := --pad 4096
   DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-mux-pca954x kmod-eeprom-at24 kmod-mt7996-firmware kmod-mt7996-233-firmware \
 		     kmod-rtc-pcf8563 kmod-sfp kmod-usb3 e2fsprogs f2fsck mkf2fs mt7988-wo-firmware
@@ -510,10 +510,15 @@ TARGET_DEVICES += bananapi_bpi-r4
 
 define Device/bananapi_bpi-r4-poe
   DEVICE_MODEL := BPi-R4 2.5GE
+ifneq ($(CONFIG_LINUX_6_6),)
   DEVICE_DTS := mt7988a-bananapi-bpi-r4-poe
+else
+  DEVICE_DTS := mt7988a-bananapi-bpi-r4-2g5
+endif
   DEVICE_DTS_CONFIG := config-mt7988a-bananapi-bpi-r4-poe
   $(call Device/bananapi_bpi-r4-common)
   DEVICE_PACKAGES += mt7988-2p5g-phy-firmware
+  SUPPORTED_DEVICES += bananapi,bpi-r4-2g5
 endef
 TARGET_DEVICES += bananapi_bpi-r4-poe