kernel: net: phy: realtek: backport upstream commits

Backport a bunch of upstream commits simplifying the RealTek PHY driver
and re-unifying the C22 and C45 driver instances.

Signed-off-by: Daniel Golle <[email protected]>

target/linux/airoha/patches-6.12/034-01-v6.13-pinctrl-airoha-Add-support-for-EN7581-SoC.patch

@@ -29,7 +29,7 @@ Signed-off-by: Linus Walleij <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -18197,6 +18197,13 @@ F:	drivers/pinctrl/
+@@ -18198,6 +18198,13 @@ F:	drivers/pinctrl/
  F:	include/dt-bindings/pinctrl/
  F:	include/linux/pinctrl/
  

target/linux/bcm27xx/patches-6.12/950-0136-media-i2c-imx477-Support-for-the-Sony-IMX477-sensor.patch

@@ -426,7 +426,7 @@ Signed-off-by: Naushir Patuck <[email protected]>
 +...
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -21556,6 +21556,14 @@ T:	git git://linuxtv.org/media.git
+@@ -21557,6 +21557,14 @@ T:	git git://linuxtv.org/media.git
  F:	Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
  F:	drivers/media/i2c/imx415.c
  

target/linux/bcm27xx/patches-6.12/950-0137-media-i2c-imx519-Support-for-the-Sony-IMX519-sensor.patch

@@ -193,7 +193,7 @@ media: i2c: imx519: Squash fixes
 +...
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -21564,6 +21564,14 @@ T:	git git://linuxtv.org/media_tree.git
+@@ -21565,6 +21565,14 @@ T:	git git://linuxtv.org/media_tree.git
  F:	Documentation/devicetree/bindings/media/i2c/imx477.yaml
  F:	drivers/media/i2c/imx477.c
  

target/linux/bcm27xx/patches-6.12/950-0147-Documentation-devicetree-Add-documentation-for-imx37.patch

@@ -132,7 +132,7 @@ Signed-off-by: David Plowman <[email protected]>
 +...
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -21561,6 +21561,7 @@ M:	Raspberry Pi Kernel Maintenance <kern
+@@ -21562,6 +21562,7 @@ M:	Raspberry Pi Kernel Maintenance <kern
  L:	[email protected]
  S:	Maintained
  T:	git git://linuxtv.org/media_tree.git

target/linux/bcm27xx/patches-6.12/950-0303-dtbindings-media-i2c-Add-IMX708-CMOS-sensor-binding.patch

@@ -137,7 +137,7 @@ Signed-off-by: Dave Stevenson <[email protected]>
 +...
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -21605,6 +21605,14 @@ T:	git git://linuxtv.org/media_tree.git
+@@ -21606,6 +21606,14 @@ T:	git git://linuxtv.org/media_tree.git
  F:	Documentation/devicetree/bindings/media/i2c/imx519.yaml
  F:	drivers/media/i2c/imx519.c
  

target/linux/bcm27xx/patches-6.12/950-0318-dt-bindings-media-i2c-Replace-IMX708-sensor-binding-.patch

@@ -271,7 +271,7 @@ Signed-off-by: Naushir Patuck <[email protected]>
 +...
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -21610,7 +21610,7 @@ M:	Raspberry Pi Kernel Maintenance <kern
+@@ -21611,7 +21611,7 @@ M:	Raspberry Pi Kernel Maintenance <kern
  L:	[email protected]
  S:	Maintained
  T:	git git://linuxtv.org/media_tree.git

target/linux/bcm27xx/patches-6.12/950-0406-media-dt-bindings-i2c-Add-Rohm-BU64754-bindings.patch

@@ -67,7 +67,7 @@ Signed-off-by: Jacopo Mondi <[email protected]>
 +...
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -20068,6 +20068,13 @@ S:	Supported
+@@ -20069,6 +20069,13 @@ S:	Supported
  F:	drivers/iio/light/rohm-bu27008.c
  F:	drivers/iio/light/rohm-bu27034.c
  

target/linux/bcm27xx/patches-6.12/950-0482-spi-dt-bindings-Add-RPI-RP2040-GPIO-Bridge.patch

@@ -94,7 +94,7 @@ Signed-off-by: Richard Oliver <[email protected]>
 +
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -19361,6 +19361,11 @@ L:	[email protected]
+@@ -19362,6 +19362,11 @@ L:	[email protected]
  S:	Maintained
  F:	drivers/ras/amd/fmpm.c
  

target/linux/bcm27xx/patches-6.12/950-0483-spi-Add-a-driver-for-the-RPI-RP2040-GPIO-bridge.patch

@@ -42,7 +42,7 @@ Signed-off-by: Richard Oliver <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -19365,6 +19365,7 @@ RASPBERRY PI RP2040 GPIO BRIDGE DRIVER
+@@ -19366,6 +19366,7 @@ RASPBERRY PI RP2040 GPIO BRIDGE DRIVER
  M:	Raspberry Pi Kernel Maintenance <[email protected]>
  S:	Maintained
  F:	Documentation/devicetree/bindings/spi/raspberrypi,rp2040-gpio-bridge.yaml

target/linux/bcm27xx/patches-6.12/950-0504-media-dt-bindings-i2c-Add-Sony-IMX500.patch

@@ -150,7 +150,7 @@ Signed-off-by: Richard Oliver <[email protected]>
 +
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -21610,6 +21610,13 @@ F:	Documentation/devicetree/bindings/med
+@@ -21611,6 +21611,13 @@ F:	Documentation/devicetree/bindings/med
  F:	Documentation/devicetree/bindings/media/i2c/imx477.yaml
  F:	drivers/media/i2c/imx477.c
  

target/linux/bcm27xx/patches-6.12/950-0505-media-i2c-Add-driver-for-Sony-IMX500-sensor.patch

@@ -58,7 +58,7 @@ Signed-off-by: Naushir Patuck <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -21616,6 +21616,7 @@ L:	[email protected]
+@@ -21617,6 +21617,7 @@ L:	[email protected]
  S:	Maintained
  T:	git git://linuxtv.org/media_tree.git
  F:	Documentation/devicetree/bindings/media/i2c/sony,imx500.yaml

target/linux/bcm27xx/patches-6.12/950-0834-media-platform-Add-Raspberry-Pi-HEVC-decoder-driver.patch

@@ -36,7 +36,7 @@ Signed-off-by: Dave Stevenson <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -19367,6 +19367,16 @@ S:	Maintained
+@@ -19368,6 +19368,16 @@ S:	Maintained
  F:	Documentation/devicetree/bindings/spi/raspberrypi,rp2040-gpio-bridge.yaml
  F:	drivers/spi/spi-rp2040-gpio-bridge.c
  

target/linux/generic/backport-6.12/792-v7.0-net-phy-realtek-add-dummy-PHY-driver-for-RTL8127ATF.patch

@@ -0,0 +1,123 @@
+From c4277d21ab694c7964a48759a5452e5bbbe12965 Mon Sep 17 00:00:00 2001
+From: Heiner Kallweit <[email protected]>
+Date: Sat, 10 Jan 2026 16:14:05 +0100
+Subject: [PATCH] net: phy: realtek: add dummy PHY driver for RTL8127ATF
+
+RTL8127ATF supports a SFP+ port for fiber modules (10GBASE-SR/LR/ER/ZR and
+DAC). The list of supported modes was provided by Realtek. According to the
+r8127 vendor driver also 1G modules are supported, but this needs some more
+complexity in the driver, and only 10G mode has been tested so far.
+Therefore mainline support will be limited to 10G for now.
+The SFP port signals are hidden in the chip IP and driven by firmware.
+Therefore mainline SFP support can't be used here.
+This PHY driver is used by the RTL8127ATF support in r8169.
+RTL8127ATF reports the same PHY ID as the TP version. Therefore use a dummy
+PHY ID.  This PHY driver is used by the RTL8127ATF support in r8169.
+
+Signed-off-by: Heiner Kallweit <[email protected]>
+Link: https://patch.msgid.link/[email protected]
+Signed-off-by: Jakub Kicinski <[email protected]>
+---
+ MAINTAINERS                            |  1 +
+ drivers/net/phy/realtek/realtek_main.c | 54 ++++++++++++++++++++++++++
+ include/net/phy/realtek_phy.h          |  7 ++++
+ 3 files changed, 62 insertions(+)
+ create mode 100644 include/net/phy/realtek_phy.h
+
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -8459,6 +8459,7 @@ F:	include/linux/phy_link_topology.h
+ F:	include/linux/phylib_stubs.h
+ F:	include/linux/platform_data/mdio-bcm-unimac.h
+ F:	include/linux/platform_data/mdio-gpio.h
++F:	include/net/phy/
+ F:	include/trace/events/mdio.h
+ F:	include/uapi/linux/mdio.h
+ F:	include/uapi/linux/mii.h
+--- a/drivers/net/phy/realtek/realtek_main.c
++++ b/drivers/net/phy/realtek/realtek_main.c
+@@ -17,6 +17,7 @@
+ #include <linux/delay.h>
+ #include <linux/clk.h>
+ #include <linux/string_choices.h>
++#include <net/phy/realtek_phy.h>
+ 
+ #include "realtek.h"
+ 
+@@ -2099,6 +2100,45 @@ static irqreturn_t rtl8221b_handle_inter
+ 	return IRQ_HANDLED;
+ }
+ 
++static int rtlgen_sfp_get_features(struct phy_device *phydev)
++{
++	linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
++			 phydev->supported);
++
++	/* set default mode */
++	phydev->speed = SPEED_10000;
++	phydev->duplex = DUPLEX_FULL;
++
++	phydev->port = PORT_FIBRE;
++
++	return 0;
++}
++
++static int rtlgen_sfp_read_status(struct phy_device *phydev)
++{
++	int val, err;
++
++	err = genphy_update_link(phydev);
++	if (err)
++		return err;
++
++	if (!phydev->link)
++		return 0;
++
++	val = rtlgen_read_vend2(phydev, RTL_VND2_PHYSR);
++	if (val < 0)
++		return val;
++
++	rtlgen_decode_physr(phydev, val);
++
++	return 0;
++}
++
++static int rtlgen_sfp_config_aneg(struct phy_device *phydev)
++{
++	return 0;
++}
++
+ static struct phy_driver realtek_drvs[] = {
+ 	{
+ 		PHY_ID_MATCH_EXACT(0x00008201),
+@@ -2357,6 +2397,20 @@ static struct phy_driver realtek_drvs[]
+ 		.suspend	= genphy_suspend,
+ 		.resume		= rtlgen_resume,
+ 		.read_page	= rtl821x_read_page,
++		.write_page	= rtl821x_write_page,
++		.read_mmd	= rtl822x_read_mmd,
++		.write_mmd	= rtl822x_write_mmd,
++	}, {
++		PHY_ID_MATCH_EXACT(PHY_ID_RTL_DUMMY_SFP),
++		.name		= "Realtek SFP PHY Mode",
++		.flags		= PHY_IS_INTERNAL,
++		.probe		= rtl822x_probe,
++		.get_features	= rtlgen_sfp_get_features,
++		.config_aneg	= rtlgen_sfp_config_aneg,
++		.read_status	= rtlgen_sfp_read_status,
++		.suspend	= genphy_suspend,
++		.resume		= rtlgen_resume,
++		.read_page	= rtl821x_read_page,
+ 		.write_page	= rtl821x_write_page,
+ 		.read_mmd	= rtl822x_read_mmd,
+ 		.write_mmd	= rtl822x_write_mmd,
+--- /dev/null
++++ b/include/net/phy/realtek_phy.h
+@@ -0,0 +1,7 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++#ifndef _REALTEK_PHY_H
++#define _REALTEK_PHY_H
++
++#define	PHY_ID_RTL_DUMMY_SFP	0x001ccbff
++
++#endif /* _REALTEK_PHY_H */

target/linux/generic/backport-6.12/793-v7.0-net-phy-realtek-fix-in-band-capabilities-for-2.5G-PH.patch

@@ -0,0 +1,35 @@
+From 8744b63e8a9ac4a3c30b557ca6bc115851a980e9 Mon Sep 17 00:00:00 2001
+From: Jan Hoffmann <[email protected]>
+Date: Tue, 13 Jan 2026 21:55:44 +0100
+Subject: [PATCH] net: phy: realtek: fix in-band capabilities for 2.5G PHYs
+
+It looks like the configuration of in-band AN only affects SGMII, and it
+is always disabled for 2500Base-X. Adjust the reported capabilities
+accordingly.
+
+This is based on testing using OpenWrt on Zyxel XGS1010-12 rev A1 with
+RTL8226-CG, and Zyxel XGS1210-12 rev B1 with RTL8221B-VB-CG. On these
+devices, 2500Base-X in-band AN is known to work with some SFP modules
+(containing an unknown PHY). However, with the built-in Realtek PHYs,
+no auto-negotiation takes place, irrespective of the configuration of
+the PHY.
+
+Fixes: 10fbd71fc5f9b ("net: phy: realtek: implement configuring in-band an")
+Signed-off-by: Jan Hoffmann <[email protected]>
+Reviewed-by: Daniel Golle <[email protected]>
+Link: https://patch.msgid.link/[email protected]
+Signed-off-by: Jakub Kicinski <[email protected]>
+---
+ drivers/net/phy/realtek/realtek_main.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/phy/realtek/realtek_main.c
++++ b/drivers/net/phy/realtek/realtek_main.c
+@@ -1428,6 +1428,7 @@ static unsigned int rtl822x_inband_caps(
+ {
+ 	switch (interface) {
+ 	case PHY_INTERFACE_MODE_2500BASEX:
++		return LINK_INBAND_DISABLE;
+ 	case PHY_INTERFACE_MODE_SGMII:
+ 		return LINK_INBAND_DISABLE | LINK_INBAND_ENABLE;
+ 	default:

target/linux/generic/pending-6.12/720-09-net-phy-realtek-support-interrupt-also-for-C22-varia.patch → target/linux/generic/backport-6.12/794-v7.0-net-phy-realtek-support-interrupt-also-for-C22-varia.patch

@@ -1,7 +1,7 @@
-From 97f093d9c491f066e5c6bb5bd2e3758f61a9fb30 Mon Sep 17 00:00:00 2001
+From 84fb8b93fae2a4c53323b2bf6d81e7ddcc8e7cf4 Mon Sep 17 00:00:00 2001
 From: Daniel Golle <[email protected]>
-Date: Mon, 5 Jan 2026 16:59:06 +0000
-Subject: [PATCH 1/3] net: phy: realtek: support interrupt also for C22
+Date: Tue, 13 Jan 2026 03:44:00 +0000
+Subject: [PATCH 1/5] net: phy: realtek: support interrupt also for C22
  variants
 
 Now that access to MDIO_MMD_VEND2 works transparently also in Clause-22
@@ -10,27 +10,29 @@ RTL8221B-VB-CG and RTL8221B-VM-CG. This results in the C22 and C45
 driver instances now having all the same features implemented.
 
 Signed-off-by: Daniel Golle <[email protected]>
+Link: https://patch.msgid.link/7620084b1de01580edc2d0e1b9548507fb4643a8.1768275364.git.daniel@makrotopia.org
+Signed-off-by: Jakub Kicinski <[email protected]>
 ---
  drivers/net/phy/realtek/realtek_main.c | 4 ++++
  1 file changed, 4 insertions(+)
 
 --- a/drivers/net/phy/realtek/realtek_main.c
 +++ b/drivers/net/phy/realtek/realtek_main.c
-@@ -2347,6 +2347,8 @@ static struct phy_driver realtek_drvs[]
+@@ -2315,6 +2315,8 @@ static struct phy_driver realtek_drvs[]
  	}, {
  		.match_phy_device = rtl8221b_vb_cg_c22_match_phy_device,
  		.name		= "RTL8221B-VB-CG 2.5Gbps PHY (C22)",
 +		.config_intr	= rtl8221b_config_intr,
 +		.handle_interrupt = rtl8221b_handle_interrupt,
- 		.soft_reset	= genphy_soft_reset,
  		.probe		= rtl822x_probe,
  		.get_features	= rtl822x_get_features,
-@@ -2381,6 +2383,8 @@ static struct phy_driver realtek_drvs[]
+ 		.config_aneg	= rtl822x_config_aneg,
+@@ -2347,6 +2349,8 @@ static struct phy_driver realtek_drvs[]
  	}, {
  		.match_phy_device = rtl8221b_vm_cg_c22_match_phy_device,
  		.name		= "RTL8221B-VM-CG 2.5Gbps PHY (C22)",
 +		.config_intr	= rtl8221b_config_intr,
 +		.handle_interrupt = rtl8221b_handle_interrupt,
- 		.soft_reset	= genphy_soft_reset,
  		.probe		= rtl822x_probe,
  		.get_features	= rtl822x_get_features,
+ 		.config_aneg	= rtl822x_config_aneg,

target/linux/generic/backport-6.12/795-v7.0-net-phy-realtek-simplify-C22-reg-access-via-MDIO_MMD.patch

@@ -0,0 +1,61 @@
+From 2809a1c4340437f2ff6b73c0094d7ca51b575e1b Mon Sep 17 00:00:00 2001
+From: Daniel Golle <[email protected]>
+Date: Tue, 13 Jan 2026 03:44:17 +0000
+Subject: [PATCH 2/5] net: phy: realtek: simplify C22 reg access via
+ MDIO_MMD_VEND2
+
+RealTek 2.5GE PHYs have all standard Clause-22 registers mapped also
+inside MDIO_MMD_VEND2 at offset 0xa400. This is used mainly in case the
+PHY is connected to a Clause-45-only bus. The RTL8221B is frequently
+used in copper SFP module which uses the RollBall MDIO-over-I2C
+method which *only* supports Clause-45, for example.
+
+In order to support using the PHY on Clause-45-only busses, the PHY
+driver has previously been split into a C22-only and C45-only instances,
+creating quite a bit of redundancy and confusion.
+
+In preparation of reunifying the two driver instances, add support for
+translating MDIO_MMD_VEND2 registers 0xa400 to 0xa43c back to Clause-22
+registers 0 to 30 in case the PHY is accessed on a Clause-22 bus.
+
+Signed-off-by: Daniel Golle <[email protected]>
+Link: https://patch.msgid.link/fd49d86bd0445b76269fd3ea456c709c2066683f.1768275364.git.daniel@makrotopia.org
+Signed-off-by: Jakub Kicinski <[email protected]>
+---
+ drivers/net/phy/realtek/realtek_main.c | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+--- a/drivers/net/phy/realtek/realtek_main.c
++++ b/drivers/net/phy/realtek/realtek_main.c
+@@ -143,6 +143,7 @@
+ 
+ #define RTL822X_VND2_TO_PAGE(reg)		((reg) >> 4)
+ #define RTL822X_VND2_TO_PAGE_REG(reg)		(16 + (((reg) & GENMASK(3, 0)) >> 1))
++#define RTL822X_VND2_TO_C22_REG(reg)		(((reg) - 0xa400) / 2)
+ #define RTL822X_VND2_C22_REG(reg)		(0xa400 + 2 * (reg))
+ 
+ #define RTL8221B_VND2_INER			0xa4d2
+@@ -1264,6 +1265,11 @@ static int rtl822xb_read_mmd(struct phy_
+ 		return mmd_phy_read(phydev->mdio.bus, phydev->mdio.addr,
+ 				    phydev->is_c45, devnum, reg);
+ 
++	/* Simplify access to C22-registers addressed inside MDIO_MMD_VEND2 */
++	if (reg >= RTL822X_VND2_C22_REG(0) &&
++	    reg <= RTL822X_VND2_C22_REG(30))
++		return __phy_read(phydev, RTL822X_VND2_TO_C22_REG(reg));
++
+ 	/* Use paged access for MDIO_MMD_VEND2 over Clause-22 */
+ 	page = RTL822X_VND2_TO_PAGE(reg);
+ 	oldpage = __phy_read(phydev, RTL821x_PAGE_SELECT);
+@@ -1299,6 +1305,11 @@ static int rtl822xb_write_mmd(struct phy
+ 		return mmd_phy_write(phydev->mdio.bus, phydev->mdio.addr,
+ 				     phydev->is_c45, devnum, reg, val);
+ 
++	/* Simplify access to C22-registers addressed inside MDIO_MMD_VEND2 */
++	if (reg >= RTL822X_VND2_C22_REG(0) &&
++	    reg <= RTL822X_VND2_C22_REG(30))
++		return __phy_write(phydev, RTL822X_VND2_TO_C22_REG(reg), val);
++
+ 	/* Use paged access for MDIO_MMD_VEND2 over Clause-22 */
+ 	page = RTL822X_VND2_TO_PAGE(reg);
+ 	oldpage = __phy_read(phydev, RTL821x_PAGE_SELECT);

target/linux/generic/backport-6.12/796-v7.0-net-phy-realtek-reunify-C22-and-C45-drivers.patch

@@ -0,0 +1,133 @@
+From 85f75da86a0adc4798d3675aab3365e721a1dbf5 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <[email protected]>
+Date: Tue, 13 Jan 2026 03:44:25 +0000
+Subject: [PATCH 3/5] net: phy: realtek: reunify C22 and C45 drivers
+
+Reunify the split C22/C45 drivers for the RTL8221B-VB-CG 2.5Gbps and
+RTL8221B-VM-CG 2.5Gbps PHYs back into a single driver.
+
+This is possible now by using all the driver operations previously used
+by the C45 driver, as transparent access to all MMDs including
+MDIO_MMD_VEND2 is now possible also over Clause-22 MDIO.
+
+The unified driver will still only use Clause-45 access on any Clause-45
+capable busses while still working fine on Clause-22 busses.
+
+Signed-off-by: Daniel Golle <[email protected]>
+Link: https://patch.msgid.link/bffcb85fdc20e07056976962d3caaa1be5d0ddb0.1768275364.git.daniel@makrotopia.org
+Signed-off-by: Jakub Kicinski <[email protected]>
+---
+ drivers/net/phy/realtek/realtek_main.c | 72 ++++++--------------------
+ 1 file changed, 16 insertions(+), 56 deletions(-)
+
+--- a/drivers/net/phy/realtek/realtek_main.c
++++ b/drivers/net/phy/realtek/realtek_main.c
+@@ -1880,28 +1880,18 @@ static int rtl8221b_match_phy_device(str
+ 	return phydev->phy_id == RTL_8221B && rtlgen_supports_mmd(phydev);
+ }
+ 
+-static int rtl8221b_vb_cg_c22_match_phy_device(struct phy_device *phydev,
+-					       const struct phy_driver *phydrv)
++static int rtl8221b_vb_cg_match_phy_device(struct phy_device *phydev,
++					   const struct phy_driver *phydrv)
+ {
+-	return rtlgen_is_c45_match(phydev, RTL_8221B_VB_CG, false);
++	return rtlgen_is_c45_match(phydev, RTL_8221B_VB_CG, true) ||
++	       rtlgen_is_c45_match(phydev, RTL_8221B_VB_CG, false);
+ }
+ 
+-static int rtl8221b_vb_cg_c45_match_phy_device(struct phy_device *phydev,
+-					       const struct phy_driver *phydrv)
++static int rtl8221b_vm_cg_match_phy_device(struct phy_device *phydev,
++					   const struct phy_driver *phydrv)
+ {
+-	return rtlgen_is_c45_match(phydev, RTL_8221B_VB_CG, true);
+-}
+-
+-static int rtl8221b_vm_cg_c22_match_phy_device(struct phy_device *phydev,
+-					       const struct phy_driver *phydrv)
+-{
+-	return rtlgen_is_c45_match(phydev, RTL_8221B_VM_CG, false);
+-}
+-
+-static int rtl8221b_vm_cg_c45_match_phy_device(struct phy_device *phydev,
+-					       const struct phy_driver *phydrv)
+-{
+-	return rtlgen_is_c45_match(phydev, RTL_8221B_VM_CG, true);
++	return rtlgen_is_c45_match(phydev, RTL_8221B_VM_CG, true) ||
++	       rtlgen_is_c45_match(phydev, RTL_8221B_VM_CG, false);
+ }
+ 
+ static int rtl_internal_nbaset_match_phy_device(struct phy_device *phydev,
+@@ -2324,27 +2314,8 @@ static struct phy_driver realtek_drvs[]
+ 		.read_mmd	= rtl822xb_read_mmd,
+ 		.write_mmd	= rtl822xb_write_mmd,
+ 	}, {
+-		.match_phy_device = rtl8221b_vb_cg_c22_match_phy_device,
+-		.name		= "RTL8221B-VB-CG 2.5Gbps PHY (C22)",
+-		.config_intr	= rtl8221b_config_intr,
+-		.handle_interrupt = rtl8221b_handle_interrupt,
+-		.probe		= rtl822x_probe,
+-		.get_features	= rtl822x_get_features,
+-		.config_aneg	= rtl822x_config_aneg,
+-		.config_init	= rtl822xb_config_init,
+-		.inband_caps	= rtl822x_inband_caps,
+-		.config_inband	= rtl822x_config_inband,
+-		.get_rate_matching = rtl822xb_get_rate_matching,
+-		.read_status	= rtl822xb_read_status,
+-		.suspend	= genphy_suspend,
+-		.resume		= rtlgen_resume,
+-		.read_page	= rtl821x_read_page,
+-		.write_page	= rtl821x_write_page,
+-		.read_mmd	= rtl822xb_read_mmd,
+-		.write_mmd	= rtl822xb_write_mmd,
+-	}, {
+-		.match_phy_device = rtl8221b_vb_cg_c45_match_phy_device,
+-		.name		= "RTL8221B-VB-CG 2.5Gbps PHY (C45)",
++		.match_phy_device = rtl8221b_vb_cg_match_phy_device,
++		.name		= "RTL8221B-VB-CG 2.5Gbps PHY",
+ 		.config_intr	= rtl8221b_config_intr,
+ 		.handle_interrupt = rtl8221b_handle_interrupt,
+ 		.probe		= rtl822x_probe,
+@@ -2357,28 +2328,13 @@ static struct phy_driver realtek_drvs[]
+ 		.read_status	= rtl822xb_c45_read_status,
+ 		.suspend	= genphy_c45_pma_suspend,
+ 		.resume		= rtlgen_c45_resume,
+-	}, {
+-		.match_phy_device = rtl8221b_vm_cg_c22_match_phy_device,
+-		.name		= "RTL8221B-VM-CG 2.5Gbps PHY (C22)",
+-		.config_intr	= rtl8221b_config_intr,
+-		.handle_interrupt = rtl8221b_handle_interrupt,
+-		.probe		= rtl822x_probe,
+-		.get_features	= rtl822x_get_features,
+-		.config_aneg	= rtl822x_config_aneg,
+-		.config_init	= rtl822xb_config_init,
+-		.inband_caps	= rtl822x_inband_caps,
+-		.config_inband	= rtl822x_config_inband,
+-		.get_rate_matching = rtl822xb_get_rate_matching,
+-		.read_status	= rtl822xb_read_status,
+-		.suspend	= genphy_suspend,
+-		.resume		= rtlgen_resume,
+ 		.read_page	= rtl821x_read_page,
+ 		.write_page	= rtl821x_write_page,
+ 		.read_mmd	= rtl822xb_read_mmd,
+ 		.write_mmd	= rtl822xb_write_mmd,
+ 	}, {
+-		.match_phy_device = rtl8221b_vm_cg_c45_match_phy_device,
+-		.name		= "RTL8221B-VM-CG 2.5Gbps PHY (C45)",
++		.match_phy_device = rtl8221b_vm_cg_match_phy_device,
++		.name		= "RTL8221B-VM-CG 2.5Gbps PHY",
+ 		.config_intr	= rtl8221b_config_intr,
+ 		.handle_interrupt = rtl8221b_handle_interrupt,
+ 		.probe		= rtl822x_probe,
+@@ -2391,6 +2347,10 @@ static struct phy_driver realtek_drvs[]
+ 		.read_status	= rtl822xb_c45_read_status,
+ 		.suspend	= genphy_c45_pma_suspend,
+ 		.resume		= rtlgen_c45_resume,
++		.read_page	= rtl821x_read_page,
++		.write_page	= rtl821x_write_page,
++		.read_mmd	= rtl822xb_read_mmd,
++		.write_mmd	= rtl822xb_write_mmd,
+ 	}, {
+ 		.match_phy_device = rtl8251b_c45_match_phy_device,
+ 		.name		= "RTL8251B 5Gbps PHY",

target/linux/generic/backport-6.12/797-v7.0-net-phy-realtek-demystify-PHYSR-register-location.patch

@@ -0,0 +1,90 @@
+From 46ff862d376cfadf0f9e36a6edce41a003175708 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <[email protected]>
+Date: Tue, 13 Jan 2026 03:44:33 +0000
+Subject: [PATCH 4/5] net: phy: realtek: demystify PHYSR register location
+
+Turns out that register address RTL_VND2_PHYSR (0xa434) maps to
+Clause-22 register MII_RESV2. Use that to get rid of yet another magic
+number, and rename access macros accordingly.
+
+Signed-off-by: Daniel Golle <[email protected]>
+Link: https://patch.msgid.link/6ed246e0aa3ca8038d2fa432d51518959fb89b6b.1768275364.git.daniel@makrotopia.org
+Signed-off-by: Jakub Kicinski <[email protected]>
+---
+ drivers/net/phy/realtek/realtek_main.c | 26 +++++++++++++-------------
+ 1 file changed, 13 insertions(+), 13 deletions(-)
+
+--- a/drivers/net/phy/realtek/realtek_main.c
++++ b/drivers/net/phy/realtek/realtek_main.c
+@@ -178,12 +178,12 @@
+ #define RTL9000A_GINMR				0x14
+ #define RTL9000A_GINMR_LINK_STATUS		BIT(4)
+ 
+-#define RTL_VND2_PHYSR				0xa434
+-#define RTL_VND2_PHYSR_DUPLEX			BIT(3)
+-#define RTL_VND2_PHYSR_SPEEDL			GENMASK(5, 4)
+-#define RTL_VND2_PHYSR_SPEEDH			GENMASK(10, 9)
+-#define RTL_VND2_PHYSR_MASTER			BIT(11)
+-#define RTL_VND2_PHYSR_SPEED_MASK		(RTL_VND2_PHYSR_SPEEDL | RTL_VND2_PHYSR_SPEEDH)
++#define RTL_PHYSR				MII_RESV2
++#define RTL_PHYSR_DUPLEX			BIT(3)
++#define RTL_PHYSR_SPEEDL			GENMASK(5, 4)
++#define RTL_PHYSR_SPEEDH			GENMASK(10, 9)
++#define RTL_PHYSR_MASTER			BIT(11)
++#define RTL_PHYSR_SPEED_MASK			(RTL_PHYSR_SPEEDL | RTL_PHYSR_SPEEDH)
+ 
+ #define	RTL_MDIO_PCS_EEE_ABLE			0xa5c4
+ #define	RTL_MDIO_AN_EEE_ADV			0xa5d0
+@@ -1102,12 +1102,12 @@ static void rtlgen_decode_physr(struct p
+ 	 * 0: Half Duplex
+ 	 * 1: Full Duplex
+ 	 */
+-	if (val & RTL_VND2_PHYSR_DUPLEX)
++	if (val & RTL_PHYSR_DUPLEX)
+ 		phydev->duplex = DUPLEX_FULL;
+ 	else
+ 		phydev->duplex = DUPLEX_HALF;
+ 
+-	switch (val & RTL_VND2_PHYSR_SPEED_MASK) {
++	switch (val & RTL_PHYSR_SPEED_MASK) {
+ 	case 0x0000:
+ 		phydev->speed = SPEED_10;
+ 		break;
+@@ -1135,7 +1135,7 @@ static void rtlgen_decode_physr(struct p
+ 	 * 1: Master Mode
+ 	 */
+ 	if (phydev->speed >= 1000) {
+-		if (val & RTL_VND2_PHYSR_MASTER)
++		if (val & RTL_PHYSR_MASTER)
+ 			phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
+ 		else
+ 			phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
+@@ -1155,8 +1155,7 @@ static int rtlgen_read_status(struct phy
+ 	if (!phydev->link)
+ 		return 0;
+ 
+-	val = phy_read_paged(phydev, RTL822X_VND2_TO_PAGE(RTL_VND2_PHYSR),
+-			     RTL822X_VND2_TO_PAGE_REG(RTL_VND2_PHYSR));
++	val = phy_read(phydev, RTL_PHYSR);
+ 	if (val < 0)
+ 		return val;
+ 
+@@ -1623,7 +1622,8 @@ static int rtl822x_c45_read_status(struc
+ 	}
+ 
+ 	/* Read actual speed from vendor register. */
+-	val = phy_read_mmd(phydev, MDIO_MMD_VEND2, RTL_VND2_PHYSR);
++	val = phy_read_mmd(phydev, MDIO_MMD_VEND2,
++			   RTL822X_VND2_C22_REG(RTL_PHYSR));
+ 	if (val < 0)
+ 		return val;
+ 
+@@ -2127,7 +2127,7 @@ static int rtlgen_sfp_read_status(struct
+ 	if (!phydev->link)
+ 		return 0;
+ 
+-	val = rtlgen_read_vend2(phydev, RTL_VND2_PHYSR);
++	val = phy_read(phydev, RTL_PHYSR);
+ 	if (val < 0)
+ 		return val;
+ 

target/linux/generic/backport-6.12/798-v7.0-net-phy-realtek-simplify-bogus-paged-operations.patch

@@ -0,0 +1,93 @@
+From 650e55f224a575cdb18c984b95036109519502d1 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <[email protected]>
+Date: Tue, 13 Jan 2026 03:44:42 +0000
+Subject: [PATCH 5/5] net: phy: realtek: simplify bogus paged operations
+
+Only registers 0x10~0x17 are affected by the value in the page
+selection register 0x1f. Hence there is no point in using paged
+operations when accessing any other registers.
+Simplify the driver by using the normal phy_read and phy_write
+operations for registers which are anyway not affected by paging.
+
+Signed-off-by: Daniel Golle <[email protected]>
+Link: https://patch.msgid.link/0c5cbb66ce3e72a011d76f8c3d61ebcac44483bb.1768275364.git.daniel@makrotopia.org
+Signed-off-by: Jakub Kicinski <[email protected]>
+---
+ drivers/net/phy/realtek/realtek_main.c | 19 ++++++++-----------
+ 1 file changed, 8 insertions(+), 11 deletions(-)
+
+--- a/drivers/net/phy/realtek/realtek_main.c
++++ b/drivers/net/phy/realtek/realtek_main.c
+@@ -67,7 +67,6 @@
+ #define RTL8211E_DELAY_MASK			GENMASK(13, 11)
+ 
+ /* RTL8211F PHY configuration */
+-#define RTL8211F_PHYCR_PAGE			0xa43
+ #define RTL8211F_PHYCR1				0x18
+ #define RTL8211F_ALDPS_PLL_OFF			BIT(1)
+ #define RTL8211F_ALDPS_ENABLE			BIT(2)
+@@ -77,7 +76,6 @@
+ #define RTL8211F_CLKOUT_EN			BIT(0)
+ #define RTL8211F_PHYCR2_PHY_EEE_ENABLE		BIT(5)
+ 
+-#define RTL8211F_INSR_PAGE			0xa43
+ #define RTL8211F_INSR				0x1d
+ 
+ /* RTL8211F LED configuration */
+@@ -332,7 +330,7 @@ static int rtl8211f_ack_interrupt(struct
+ {
+ 	int err;
+ 
+-	err = phy_read_paged(phydev, RTL8211F_INSR_PAGE, RTL8211F_INSR);
++	err = phy_read(phydev, RTL8211F_INSR);
+ 
+ 	return (err < 0) ? err : 0;
+ }
+@@ -478,7 +476,7 @@ static irqreturn_t rtl8211f_handle_inter
+ {
+ 	int irq_status;
+ 
+-	irq_status = phy_read_paged(phydev, RTL8211F_INSR_PAGE, RTL8211F_INSR);
++	irq_status = phy_read(phydev, RTL8211F_INSR);
+ 	if (irq_status < 0) {
+ 		phy_error(phydev);
+ 		return IRQ_NONE;
+@@ -669,8 +667,8 @@ static int rtl8211f_config_clk_out(struc
+ 				       RTL8211FVD_CLKOUT_REG,
+ 				       RTL8211FVD_CLKOUT_EN, 0);
+ 	else
+-		ret = phy_modify_paged(phydev, RTL8211F_PHYCR_PAGE,
+-				       RTL8211F_PHYCR2, RTL8211F_CLKOUT_EN, 0);
++		ret = phy_modify(phydev, RTL8211F_PHYCR2, RTL8211F_CLKOUT_EN,
++				 0);
+ 	if (ret)
+ 		return ret;
+ 
+@@ -695,15 +693,14 @@ static int rtl8211f_config_aldps(struct
+ 	if (!priv->enable_aldps)
+ 		return 0;
+ 
+-	return phy_modify_paged(phydev, RTL8211F_PHYCR_PAGE, RTL8211F_PHYCR1,
+-				mask, mask);
++	return phy_modify(phydev, RTL8211F_PHYCR1, mask, mask);
+ }
+ 
+ static int rtl8211f_config_phy_eee(struct phy_device *phydev)
+ {
+ 	/* Disable PHY-mode EEE so LPI is passed to the MAC */
+-	return phy_modify_paged(phydev, RTL8211F_PHYCR_PAGE, RTL8211F_PHYCR2,
+-				RTL8211F_PHYCR2_PHY_EEE_ENABLE, 0);
++	return phy_modify(phydev, RTL8211F_PHYCR2,
++			  RTL8211F_PHYCR2_PHY_EEE_ENABLE, 0);
+ }
+ 
+ static int rtl8211f_config_init(struct phy_device *phydev)
+@@ -769,7 +766,7 @@ static int rtl8211f_suspend(struct phy_d
+ 			goto err;
+ 
+ 		/* Read the INSR to clear any pending interrupt */
+-		phy_read_paged(phydev, RTL8211F_INSR_PAGE, RTL8211F_INSR);
++		phy_read(phydev, RTL8211F_INSR);
+ 
+ 		/* Reset the WoL to ensure that an event is picked up.
+ 		 * Unless we do this, even if we receive another packet,

target/linux/generic/pending-6.12/510-block-add-uImage.FIT-subimage-block-driver.patch

@@ -36,7 +36,7 @@ Signed-off-by: Daniel Golle <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -23669,6 +23669,12 @@ F:	Documentation/filesystems/ubifs-authe
+@@ -23670,6 +23670,12 @@ F:	Documentation/filesystems/ubifs-authe
  F:	Documentation/filesystems/ubifs.rst
  F:	fs/ubifs/
  

target/linux/generic/pending-6.12/720-01-net-phy-realtek-use-genphy_soft_reset-for-2.5G-PHYs.patch

@@ -15,7 +15,7 @@ Signed-off-by: Daniel Golle <[email protected]>
 
 --- a/drivers/net/phy/realtek/realtek_main.c
 +++ b/drivers/net/phy/realtek/realtek_main.c
-@@ -2216,6 +2216,7 @@ static struct phy_driver realtek_drvs[]
+@@ -2255,6 +2255,7 @@ static struct phy_driver realtek_drvs[]
  	}, {
  		.name		= "RTL8226 2.5Gbps PHY",
  		.match_phy_device = rtl8226_match_phy_device,
@@ -23,7 +23,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  		.get_features	= rtl822x_get_features,
  		.config_aneg	= rtl822x_config_aneg,
  		.read_status	= rtl822x_read_status,
-@@ -2228,6 +2229,7 @@ static struct phy_driver realtek_drvs[]
+@@ -2267,6 +2268,7 @@ static struct phy_driver realtek_drvs[]
  	}, {
  		.match_phy_device = rtl8221b_match_phy_device,
  		.name		= "RTL8226B_RTL8221B 2.5Gbps PHY",
@@ -31,7 +31,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  		.get_features	= rtl822x_get_features,
  		.config_aneg	= rtl822x_config_aneg,
  		.config_init	= rtl822xb_config_init,
-@@ -2258,6 +2260,7 @@ static struct phy_driver realtek_drvs[]
+@@ -2297,6 +2299,7 @@ static struct phy_driver realtek_drvs[]
  	}, {
  		PHY_ID_MATCH_EXACT(0x001cc848),
  		.name		= "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
@@ -39,32 +39,16 @@ Signed-off-by: Daniel Golle <[email protected]>
  		.get_features	= rtl822x_get_features,
  		.config_aneg	= rtl822x_config_aneg,
  		.config_init	= rtl822xb_config_init,
-@@ -2274,6 +2277,7 @@ static struct phy_driver realtek_drvs[]
- 	}, {
- 		.match_phy_device = rtl8221b_vb_cg_c22_match_phy_device,
- 		.name		= "RTL8221B-VB-CG 2.5Gbps PHY (C22)",
-+		.soft_reset	= genphy_soft_reset,
- 		.probe		= rtl822x_probe,
- 		.get_features	= rtl822x_get_features,
- 		.config_aneg	= rtl822x_config_aneg,
-@@ -2293,6 +2297,7 @@ static struct phy_driver realtek_drvs[]
- 		.name		= "RTL8221B-VB-CG 2.5Gbps PHY (C45)",
+@@ -2315,6 +2318,7 @@ static struct phy_driver realtek_drvs[]
+ 		.name		= "RTL8221B-VB-CG 2.5Gbps PHY",
  		.config_intr	= rtl8221b_config_intr,
  		.handle_interrupt = rtl8221b_handle_interrupt,
 +		.soft_reset	= rtl822x_c45_soft_reset,
  		.probe		= rtl822x_probe,
  		.config_init	= rtl822xb_config_init,
  		.inband_caps	= rtl822x_inband_caps,
-@@ -2306,6 +2311,7 @@ static struct phy_driver realtek_drvs[]
- 	}, {
- 		.match_phy_device = rtl8221b_vm_cg_c22_match_phy_device,
- 		.name		= "RTL8221B-VM-CG 2.5Gbps PHY (C22)",
-+		.soft_reset	= genphy_soft_reset,
- 		.probe		= rtl822x_probe,
- 		.get_features	= rtl822x_get_features,
- 		.config_aneg	= rtl822x_config_aneg,
-@@ -2325,6 +2331,7 @@ static struct phy_driver realtek_drvs[]
- 		.name		= "RTL8221B-VM-CG 2.5Gbps PHY (C45)",
+@@ -2334,6 +2338,7 @@ static struct phy_driver realtek_drvs[]
+ 		.name		= "RTL8221B-VM-CG 2.5Gbps PHY",
  		.config_intr	= rtl8221b_config_intr,
  		.handle_interrupt = rtl8221b_handle_interrupt,
 +		.soft_reset	= rtl822x_c45_soft_reset,

target/linux/generic/pending-6.12/720-03-net-phy-realtek-make-sure-paged-read-is-protected-by.patch

@@ -18,7 +18,7 @@ Signed-off-by: Daniel Golle <[email protected]>
 
 --- a/drivers/net/phy/realtek/realtek_main.c
 +++ b/drivers/net/phy/realtek/realtek_main.c
-@@ -1813,9 +1813,11 @@ static bool rtlgen_supports_2_5gbps(stru
+@@ -1823,9 +1823,11 @@ static bool rtlgen_supports_2_5gbps(stru
  {
  	int val;
  

target/linux/generic/pending-6.12/720-04-net-phy-realtek-setup-aldps.patch

@@ -35,7 +35,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  static int rtl821x_read_page(struct phy_device *phydev)
  {
  	return __phy_read(phydev, RTL821x_PAGE_SELECT);
-@@ -1240,6 +1248,18 @@ static int rtl822x_write_mmd(struct phy_
+@@ -1238,6 +1246,18 @@ static int rtl822x_write_mmd(struct phy_
  
  static int rtl822x_probe(struct phy_device *phydev)
  {
@@ -54,7 +54,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  	if (IS_ENABLED(CONFIG_REALTEK_PHY_HWMON) &&
  	    phydev->phy_id != RTL_GENERIC_PHYID)
  		return rtl822x_hwmon_init(phydev);
-@@ -1320,6 +1340,19 @@ static int rtl822xb_write_mmd(struct phy
+@@ -1328,6 +1348,19 @@ static int rtl822xb_write_mmd(struct phy
  	return write_ret;
  }
  
@@ -74,7 +74,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  static int rtl822x_set_serdes_option_mode(struct phy_device *phydev, bool gen1)
  {
  	bool has_2500, has_sgmii;
-@@ -1377,7 +1410,15 @@ static int rtl822x_set_serdes_option_mod
+@@ -1385,7 +1418,15 @@ static int rtl822x_set_serdes_option_mod
  	if (ret < 0)
  		return ret;
  

target/linux/generic/pending-6.12/720-05-net-phy-realtek-detect-early-version-of-RTL8221B.patch

@@ -14,7 +14,7 @@ Signed-off-by: Daniel Golle <[email protected]>
 Signed-off-by: Mieczyslaw Nalewaj <[email protected]>
 --- a/drivers/net/phy/realtek/realtek_main.c
 +++ b/drivers/net/phy/realtek/realtek_main.c
-@@ -1898,10 +1898,32 @@ static int rtl8226_match_phy_device(stru
+@@ -1908,10 +1908,32 @@ static int rtl8226_match_phy_device(stru
  static int rtlgen_is_c45_match(struct phy_device *phydev, unsigned int id,
  			       bool is_c45)
  {

target/linux/generic/pending-6.12/720-06-net-phy-realtek-mark-existing-MMDs-as-present.patch

@@ -15,7 +15,7 @@ Signed-off-by: Daniel Golle <[email protected]>
 
 --- a/drivers/net/phy/realtek/realtek_main.c
 +++ b/drivers/net/phy/realtek/realtek_main.c
-@@ -1595,6 +1595,9 @@ static int rtl822x_c45_get_features(stru
+@@ -1604,6 +1604,9 @@ static int rtl822x_c45_get_features(stru
  	linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT,
  			 phydev->supported);
  

target/linux/generic/pending-6.12/720-07-net-phy-realtek-disable-MDIO-broadcast.patch

@@ -21,7 +21,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  
  #define RTL8366RB_POWER_SAVE			0x15
  #define RTL8366RB_POWER_SAVE_ON			BIT(12)
-@@ -1350,7 +1351,8 @@ static int rtl822x_init_phycr1(struct ph
+@@ -1358,7 +1359,8 @@ static int rtl822x_init_phycr1(struct ph
  
  	return phy_modify_mmd_changed(phydev, MDIO_MMD_VEND2, RTL8221B_PHYCR1,
  				      RTL8221B_PHYCR1_ALDPS_EN |

target/linux/generic/pending-6.12/720-08-net-phy-realtek-rate-adapter-in-C22-mode.patch

@@ -11,7 +11,7 @@ interface mode if the PHY is connected using Clause-45 MDIO.
 Signed-off-by: Daniel Golle <[email protected]>
 --- a/drivers/net/phy/realtek/realtek_main.c
 +++ b/drivers/net/phy/realtek/realtek_main.c
-@@ -1379,7 +1379,7 @@ static int rtl822x_set_serdes_option_mod
+@@ -1387,7 +1387,7 @@ static int rtl822x_set_serdes_option_mod
  		return 0;
  
  	/* determine SerDes option mode */

target/linux/generic/pending-6.12/739-05-net-pcs-add-driver-for-MediaTek-USXGMII-PCS.patch

@@ -19,7 +19,7 @@ Signed-off-by: Daniel Golle <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -14425,7 +14425,9 @@ M:	Daniel Golle <[email protected]>
+@@ -14426,7 +14426,9 @@ M:	Daniel Golle <[email protected]>
  L:	[email protected]
  S:	Maintained
  F:	drivers/net/pcs/pcs-mtk-lynxi.c

target/linux/ipq40xx/patches-6.12/700-net-ipqess-introduce-the-Qualcomm-IPQESS-driver.patch

@@ -32,7 +32,7 @@ Signed-off-by: Maxime Chevallier <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -19031,6 +19031,13 @@ L:	[email protected]
+@@ -19032,6 +19032,13 @@ L:	[email protected]
  S:	Maintained
  F:	drivers/net/ethernet/qualcomm/emac/
  

target/linux/ipq40xx/patches-6.12/701-net-dsa-add-out-of-band-tagging-protocol.patch

@@ -64,7 +64,7 @@ Signed-off-by: Maxime Chevallier <[email protected]>
  
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -19037,6 +19037,7 @@ L:	[email protected]
+@@ -19038,6 +19038,7 @@ L:	[email protected]
  S:	Maintained
  F:	Documentation/devicetree/bindings/net/qcom,ipq4019-ess-edma.yaml
  F:	drivers/net/ethernet/qualcomm/ipqess/

target/linux/layerscape/patches-6.12/701-staging-add-fsl_ppfe-driver.patch

@@ -945,7 +945,7 @@ Signed-off-by: Dong Aisheng <[email protected]>
 +};
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -9113,6 +9113,14 @@ F:	drivers/ptp/ptp_qoriq.c
+@@ -9114,6 +9114,14 @@ F:	drivers/ptp/ptp_qoriq.c
  F:	drivers/ptp/ptp_qoriq_debugfs.c
  F:	include/linux/fsl/ptp_qoriq.h
  

target/linux/mediatek/patches-6.12/700-net-phy-mediatek-Add-2.5Gphy-firmware-dt-bindings-an.patch

@@ -57,7 +57,7 @@ Signed-off-by: Sky Huang <[email protected]>
 +    };
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -14432,9 +14432,10 @@ F:	include/linux/pcs/pcs-mtk-usxgmii.h
+@@ -14433,9 +14433,10 @@ F:	include/linux/pcs/pcs-mtk-usxgmii.h
  MEDIATEK ETHERNET PHY DRIVERS
  M:	Daniel Golle <[email protected]>
  M:	Qingfang Deng <[email protected]>

target/linux/mediatek/patches-6.12/701-net-phy-mediatek-add-driver-for-built-in-2.5G-ethern.patch

@@ -20,7 +20,7 @@ Signed-off-by: Sky Huang <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -14436,6 +14436,7 @@ M:	Sky Huang <[email protected]
+@@ -14437,6 +14437,7 @@ M:	Sky Huang <[email protected]
  L:	[email protected]
  S:	Maintained
  F:	Documentation/devicetree/bindings/net/mediatek,2p5gphy-fw.yaml

target/linux/microchipsw/patches-6.12/0044-v6.13-net-lan969x-add-match-data-for-lan969x.patch

@@ -32,7 +32,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -15153,6 +15153,13 @@ S:	Maintained
+@@ -15154,6 +15154,13 @@ S:	Maintained
  F:	Documentation/devicetree/bindings/interrupt-controller/microchip,lan966x-oic.yaml
  F:	drivers/irqchip/irq-lan966x-oic.c
  

target/linux/microchipsw/patches-6.12/0060-v6.13-net-lan969x-fix-cyclic-dependency-reported-by-depmod.patch

@@ -54,7 +54,7 @@ Signed-off-by: David S. Miller <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -15158,7 +15158,7 @@ M:	Daniel Machon <daniel.machon@microchi
+@@ -15159,7 +15159,7 @@ M:	Daniel Machon <daniel.machon@microchi
  M:	[email protected]
  L:	[email protected]
  S:	Maintained

target/linux/mvebu/patches-6.12/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch

@@ -16,7 +16,7 @@ Cc: Robert Marko <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -10971,6 +10971,22 @@ L:	[email protected]
+@@ -10972,6 +10972,22 @@ L:	[email protected]
  S:	Supported
  F:	drivers/vdpa/ifcvf/
  

target/linux/qualcommbe/patches-6.12/0318-MAINTAINERS-Add-maintainer-for-Qualcomm-IPQ9574-PCS-.patch

@@ -13,7 +13,7 @@ Signed-off-by: Lei Wei <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -19122,6 +19122,15 @@ S:	Maintained
+@@ -19123,6 +19123,15 @@ S:	Maintained
  F:	Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
  F:	drivers/regulator/vqmmc-ipq4019-regulator.c
  

target/linux/qualcommbe/patches-6.12/0336-MAINTAINERS-Add-maintainer-for-Qualcomm-PPE-driver.patch

@@ -13,7 +13,7 @@ Signed-off-by: Luo Jie <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -19139,6 +19139,14 @@ S:	Maintained
+@@ -19140,6 +19140,14 @@ S:	Maintained
  F:	Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
  F:	drivers/mtd/nand/raw/qcom_nandc.c
  

target/linux/realtek/patches-6.12/001-v6.13-spi-mem-add-realtek-nand-controller.patch

@@ -28,7 +28,7 @@ Signed-off-by: Mark Brown <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -19500,6 +19500,12 @@ S:	Maintained
+@@ -19501,6 +19501,12 @@ S:	Maintained
  F:	Documentation/devicetree/bindings/net/dsa/realtek.yaml
  F:	drivers/net/dsa/realtek/*
  

target/linux/realtek/patches-6.12/003-v6.13-02-i2c-Add-driver-for-the-RTL9300-I2C-controller.patch

@@ -22,7 +22,7 @@ Signed-off-by: Andi Shyti <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -20157,6 +20157,13 @@ S:	Maintained
+@@ -20158,6 +20158,13 @@ S:	Maintained
  T:	git https://github.com/pkshih/rtw.git
  F:	drivers/net/wireless/realtek/rtl8xxxu/
  

target/linux/starfive/patches-6.12/1007-reset-starfive-Add-JH7100-audio-reset-driver.patch

@@ -20,7 +20,7 @@ Signed-off-by: Emil Renner Berthing <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -22071,7 +22071,7 @@ STARFIVE JH71X0 RESET CONTROLLER DRIVERS
+@@ -22072,7 +22072,7 @@ STARFIVE JH71X0 RESET CONTROLLER DRIVERS
  M:	Emil Renner Berthing <[email protected]>
  M:	Hal Feng <[email protected]>
  S:	Maintained