ipq806x: modularize generic subtarget

This commit moves the device profiles within the ipq806x/generic
subtarget into their own includable .mk file, to support eventually
having subtargets other than generic.

Signed-off-by: Alex Lewontin <[email protected]>

target/linux/ipq806x/image/Makefile

@@ -3,26 +3,6 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
-DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
-DEVICE_VARS += TPLINK_BOARD_ID
-
-define Build/buffalo-rootfs-cksum
-	( \
-		echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \
-			$(STAGING_DIR_HOST)/bin/awk '{s+=$$0}END{printf "%x", 255-s%256}')"; \
-	) >> $@
-endef
-
-define Build/edimax-header
-	$(eval edimax_model=$(word 1,$(1)))
-
-	$(STAGING_DIR_HOST)/bin/mkedimaximg \
-	-b -s CSYS -m $(edimax_model) \
-	-f 0x70000 -S 0x1200000 \
-	-i $@ -o [email protected]
-	@mv [email protected] $@
-endef
-
 define Device/Default
 	PROFILES := Default
 	KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
@@ -59,415 +39,6 @@ define Device/UbiFit
 	IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
 endef
 
-define Device/DniImage
-	KERNEL_SUFFIX := -uImage
-	KERNEL = kernel-bin | append-dtb | uImage none
-	KERNEL_NAME := zImage
-	NETGEAR_BOARD_ID :=
-	NETGEAR_HW_ID :=
-	UBINIZE_OPTS := -E 5
-	IMAGES += factory.img
-	IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
-	IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | append-metadata
-endef
-
-define Device/TpSafeImage
-	KERNEL_SUFFIX := -uImage
-	KERNEL = kernel-bin | append-dtb | uImage none
-	KERNEL_NAME := zImage
-	TPLINK_BOARD_ID :=
-	IMAGES += factory.bin
-	IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
-	IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
-endef
-
-define Device/ZyXELImage
-	KERNEL_SUFFIX := -uImage
-	KERNEL = kernel-bin | append-dtb | uImage none | pad-to $$(KERNEL_SIZE)
-	KERNEL_NAME := zImage
-	IMAGES += factory.bin
-	IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel
-	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
-endef
-
-define Device/askey_rt4230w-rev6
-	$(call Device/LegacyImage)
-	DEVICE_VENDOR := Askey
-	DEVICE_MODEL := RT4230W
-	DEVICE_VARIANT := REV6
-	SOC := qcom-ipq8065
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
-	KERNEL_IN_UBI := 1
-endef
-TARGET_DEVICES += askey_rt4230w-rev6
-
-define Device/asrock_g10
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	SOC := qcom-ipq8064
-	DEVICE_VENDOR := ASRock
-	DEVICE_MODEL := G10
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	KERNEL_SIZE := 5332k
-	DEVICE_PACKAGES := kmod-i2c-gpio ath10k-firmware-qca99x0-ct
-	IMAGE/nand-factory.bin := append-ubi | edimax-header RN67
-endef
-TARGET_DEVICES += asrock_g10
-
-define Device/buffalo_wxr-2533dhp
-	$(call Device/LegacyImage)
-	SOC := qcom-ipq8064
-	DEVICE_VENDOR := Buffalo
-	DEVICE_MODEL := WXR-2533DHP
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	IMAGE_SIZE := 65536k
-	KERNEL_IN_UBI := 1
-	IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \
-		sysupgrade-tar rootfs=$$$$@ | append-metadata
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += buffalo_wxr-2533dhp
-
-define Device/compex_wpq864
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Compex
-	DEVICE_MODEL := WPQ864
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	SOC := qcom-ipq8064
-	DEVICE_PACKAGES := kmod-gpio-beeper
-endef
-TARGET_DEVICES += compex_wpq864
-
-define Device/edgecore_ecw5410
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Edgecore
-	DEVICE_MODEL := ECW5410
-	SOC := qcom-ipq8068
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_DTS_CONFIG := [email protected]
-	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-edgecore_ecw5410
-endef
-TARGET_DEVICES += edgecore_ecw5410
-
-define Device/linksys_ea7500-v1
-	$(call Device/LegacyImage)
-	DEVICE_VENDOR := Linksys
-	DEVICE_MODEL := EA7500
-	DEVICE_VARIANT := v1
-	SOC := qcom-ipq8064
-	PAGESIZE := 2048
-	BLOCKSIZE := 128k
-	KERNEL_SIZE := 3072k
-	KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakehdr filesystem
-	UBINIZE_OPTS := -E 5
-	IMAGES := factory.bin sysupgrade.bin
-	IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += linksys_ea7500-v1
-
-define Device/linksys_ea8500
-	$(call Device/LegacyImage)
-	DEVICE_VENDOR := Linksys
-	DEVICE_MODEL := EA8500
-	SOC := qcom-ipq8064
-	PAGESIZE := 2048
-	BLOCKSIZE := 128k
-	KERNEL_SIZE := 3072k
-	KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakehdr filesystem
-	BOARD_NAME := ea8500
-	SUPPORTED_DEVICES += ea8500
-	UBINIZE_OPTS := -E 5
-	IMAGES += factory.bin
-	IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += linksys_ea8500
-
-define Device/meraki_mr42
-	$(call Device/FitImage)
-	DEVICE_VENDOR := Cisco Meraki
-	DEVICE_MODEL := MR42
-	SOC := qcom-ipq8068
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	KERNEL_LOADADDR = 0x44208000
-	DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
-		-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
-		-kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
-		-uboot-envtools ath10k-firmware-qca9887-ct \
-		ath10k-firmware-qca99x0-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
-		kmod-leds-tlc591xx
-endef
-TARGET_DEVICES += meraki_mr42
-
-define Device/meraki_mr52
-	$(call Device/FitImage)
-	DEVICE_VENDOR := Cisco Meraki
-	DEVICE_MODEL := MR52
-	SOC := qcom-ipq8068
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	KERNEL_LOADADDR = 0x44208000
-	DEVICE_DTS_CONFIG := config@2
-	DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
-		-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
-		-kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
-		-uboot-envtools ath10k-firmware-qca9887-ct \
-		ath10k-firmware-qca9984-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
-		kmod-leds-tlc591xx
-endef
-TARGET_DEVICES += meraki_mr52
-
-define Device/nec_wg2600hp
-	$(call Device/LegacyImage)
-	DEVICE_VENDOR := NEC
-	DEVICE_MODEL := Aterm WG2600HP
-	SOC := qcom-ipq8064
-	BLOCKSIZE := 64k
-	BOARD_NAME := wg2600hp
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += nec_wg2600hp
-
-define Device/nec_wg2600hp3
-	$(call Device/LegacyImage)
-	DEVICE_VENDOR := NEC Platforms
-	DEVICE_MODEL := Aterm WG2600HP3
-	SOC := qcom-ipq8062
-	BLOCKSIZE := 64k
-	IMAGES := sysupgrade.bin
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := -kmod-ata-ahci -kmod-ata-ahci-platform -kmod-usb-ohci -kmod-usb2 \
-		-kmod-usb-ledtrig-usbport -kmod-usb-phy-qcom-dwc3 -kmod-usb3 -kmod-usb-dwc3-qcom \
-		ath10k-firmware-qca9984-ct ipq-wifi-nec_wg2600hp3
-endef
-TARGET_DEVICES += nec_wg2600hp3
-
-define Device/netgear_d7800
-	$(call Device/DniImage)
-	DEVICE_VENDOR := NETGEAR
-	DEVICE_MODEL := Nighthawk X4 D7800
-	SOC := qcom-ipq8064
-	KERNEL_SIZE := 4096k
-	NETGEAR_BOARD_ID := D7800
-	NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := d7800
-	SUPPORTED_DEVICES += d7800
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += netgear_d7800
-
-define Device/netgear_r7500
-	$(call Device/DniImage)
-	DEVICE_VENDOR := NETGEAR
-	DEVICE_MODEL := Nighthawk X4 R7500
-	DEVICE_VARIANT := v1
-	SOC := qcom-ipq8064
-	KERNEL_SIZE := 4096k
-	NETGEAR_BOARD_ID := R7500
-	NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := r7500
-	SUPPORTED_DEVICES += r7500
-	DEVICE_PACKAGES := ath10k-firmware-qca988x-ct
-endef
-TARGET_DEVICES += netgear_r7500
-
-define Device/netgear_r7500v2
-	$(call Device/DniImage)
-	DEVICE_VENDOR := NETGEAR
-	DEVICE_MODEL := Nighthawk X4 R7500
-	DEVICE_VARIANT := v2
-	SOC := qcom-ipq8064
-	KERNEL_SIZE := 4096k
-	NETGEAR_BOARD_ID := R7500v2
-	NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := r7500v2
-	SUPPORTED_DEVICES += r7500v2
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct ath10k-firmware-qca988x-ct
-endef
-TARGET_DEVICES += netgear_r7500v2
-
-define Device/netgear_r7800
-	$(call Device/DniImage)
-	DEVICE_VENDOR := NETGEAR
-	DEVICE_MODEL := Nighthawk X4S R7800
-	SOC := qcom-ipq8065
-	KERNEL_SIZE := 4096k
-	NETGEAR_BOARD_ID := R7800
-	NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := r7800
-	SUPPORTED_DEVICES += r7800
-	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
-endef
-TARGET_DEVICES += netgear_r7800
-
-define Device/netgear_xr500
-	$(call Device/DniImage)
-	DEVICE_VENDOR := NETGEAR
-	DEVICE_MODEL := Nighthawk XR500
-	SOC := qcom-ipq8065
-	KERNEL_SIZE := 4096k
-	NETGEAR_BOARD_ID := XR500
-	NETGEAR_HW_ID := 29764958+0+256+512+4x4+4x4+cascade
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
-endef
-TARGET_DEVICES += netgear_xr500
-
-define Device/qcom_ipq8064-ap148
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Qualcomm
-	DEVICE_MODEL := AP148
-	DEVICE_VARIANT := standard
-	SOC := qcom-ipq8064
-	DEVICE_DTS := qcom-ipq8064-ap148
-	KERNEL_INSTALL := 1
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := ap148
-	SUPPORTED_DEVICES += ap148
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += qcom_ipq8064-ap148
-
-define Device/qcom_ipq8064-ap148-legacy
-	$(call Device/LegacyImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Qualcomm
-	DEVICE_MODEL := AP148
-	DEVICE_VARIANT := legacy
-	SOC := qcom-ipq8064
-	DEVICE_DTS := qcom-ipq8064-ap148
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := ap148
-	SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += qcom_ipq8064-ap148-legacy
-
-define Device/qcom_ipq8064-ap161
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Qualcomm
-	DEVICE_MODEL := AP161
-	SOC := qcom-ipq8064
-	DEVICE_DTS := qcom-ipq8064-ap161
-	KERNEL_INSTALL := 1
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := ap161
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += qcom_ipq8064-ap161
-
-define Device/qcom_ipq8064-db149
-	$(call Device/FitImage)
-	DEVICE_VENDOR := Qualcomm
-	DEVICE_MODEL := DB149
-	SOC := qcom-ipq8064
-	DEVICE_DTS := qcom-ipq8064-db149
-	KERNEL_INSTALL := 1
-	BOARD_NAME := db149
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += qcom_ipq8064-db149
-
-define Device/tplink_ad7200
-	$(call Device/TpSafeImage)
-	DEVICE_VENDOR := TP-Link
-	DEVICE_MODEL := AD7200
-	DEVICE_VARIANT := v1/v2
-	DEVICE_ALT0_VENDOR := TP-Link
-	DEVICE_ALT0_MODEL := Talon AD7200
-	DEVICE_ALT0_VARIANT := v1/v2
-	SOC := qcom-ipq8064
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	TPLINK_BOARD_ID := AD7200
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-wil6210
-endef
-TARGET_DEVICES += tplink_ad7200
-
-define Device/tplink_c2600
-	$(call Device/TpSafeImage)
-	DEVICE_VENDOR := TP-Link
-	DEVICE_MODEL := Archer C2600
-	DEVICE_VARIANT := v1
-	SOC := qcom-ipq8064
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := c2600
-	SUPPORTED_DEVICES += c2600
-	TPLINK_BOARD_ID := C2600
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += tplink_c2600
-
-define Device/tplink_vr2600v
-	DEVICE_VENDOR := TP-Link
-	DEVICE_MODEL := Archer VR2600v
-	DEVICE_VARIANT := v1
-	KERNEL_SUFFIX := -uImage
-	KERNEL = kernel-bin | append-dtb | uImage none
-	KERNEL_NAME := zImage
-	KERNEL_SIZE := 3072k
-	SOC := qcom-ipq8064
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := vr2600v
-	SUPPORTED_DEVICES += vr2600v
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-	IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += tplink_vr2600v
-
-define Device/ubnt_unifi-ac-hd
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := Ubiquiti
-	DEVICE_MODEL := UniFi AC HD
-	SOC := qcom-ipq8064
-	BLOCKSIZE := 64k
-	IMAGE_SIZE := 14784k
-	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
-	IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
-endef
-TARGET_DEVICES += ubnt_unifi-ac-hd
-
-define Device/zyxel_nbg6817
-	DEVICE_VENDOR := ZyXEL
-	DEVICE_MODEL := NBG6817
-	SOC := qcom-ipq8065
-	KERNEL_SIZE := 4096k
-	BLOCKSIZE := 64k
-	BOARD_NAME := nbg6817
-	RAS_BOARD := NBG6817
-	RAS_ROOTFS_SIZE := 20934k
-	RAS_VERSION := "V1.99(OWRT.9999)C0"
-	SUPPORTED_DEVICES += nbg6817
-	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
-	$(call Device/ZyXELImage)
-endef
-TARGET_DEVICES += zyxel_nbg6817
+include $(SUBTARGET).mk
 
 $(eval $(call BuildImage))

target/linux/ipq806x/image/generic.mk

@@ -0,0 +1,430 @@
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
+DEVICE_VARS += TPLINK_BOARD_ID
+
+define Build/buffalo-rootfs-cksum
+	( \
+		echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \
+			$(STAGING_DIR_HOST)/bin/awk '{s+=$$0}END{printf "%x", 255-s%256}')"; \
+	) >> $@
+endef
+
+define Build/edimax-header
+	$(eval edimax_model=$(word 1,$(1)))
+
+	$(STAGING_DIR_HOST)/bin/mkedimaximg \
+	-b -s CSYS -m $(edimax_model) \
+	-f 0x70000 -S 0x1200000 \
+	-i $@ -o [email protected]
+	@mv [email protected] $@
+endef
+
+define Device/DniImage
+	KERNEL_SUFFIX := -uImage
+	KERNEL = kernel-bin | append-dtb | uImage none
+	KERNEL_NAME := zImage
+	NETGEAR_BOARD_ID :=
+	NETGEAR_HW_ID :=
+	UBINIZE_OPTS := -E 5
+	IMAGES += factory.img
+	IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
+	IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | append-metadata
+endef
+
+define Device/TpSafeImage
+	KERNEL_SUFFIX := -uImage
+	KERNEL = kernel-bin | append-dtb | uImage none
+	KERNEL_NAME := zImage
+	TPLINK_BOARD_ID :=
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+	IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
+endef
+
+define Device/ZyXELImage
+	KERNEL_SUFFIX := -uImage
+	KERNEL = kernel-bin | append-dtb | uImage none | pad-to $$(KERNEL_SIZE)
+	KERNEL_NAME := zImage
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
+endef
+
+define Device/askey_rt4230w-rev6
+	$(call Device/LegacyImage)
+	DEVICE_VENDOR := Askey
+	DEVICE_MODEL := RT4230W
+	DEVICE_VARIANT := REV6
+	SOC := qcom-ipq8065
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
+	KERNEL_IN_UBI := 1
+endef
+TARGET_DEVICES += askey_rt4230w-rev6
+
+define Device/asrock_g10
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	SOC := qcom-ipq8064
+	DEVICE_VENDOR := ASRock
+	DEVICE_MODEL := G10
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_SIZE := 5332k
+	DEVICE_PACKAGES := kmod-i2c-gpio ath10k-firmware-qca99x0-ct
+	IMAGE/nand-factory.bin := append-ubi | edimax-header RN67
+endef
+TARGET_DEVICES += asrock_g10
+
+define Device/buffalo_wxr-2533dhp
+	$(call Device/LegacyImage)
+	SOC := qcom-ipq8064
+	DEVICE_VENDOR := Buffalo
+	DEVICE_MODEL := WXR-2533DHP
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGE_SIZE := 65536k
+	KERNEL_IN_UBI := 1
+	IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \
+		sysupgrade-tar rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += buffalo_wxr-2533dhp
+
+define Device/compex_wpq864
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Compex
+	DEVICE_MODEL := WPQ864
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	SOC := qcom-ipq8064
+	DEVICE_PACKAGES := kmod-gpio-beeper
+endef
+TARGET_DEVICES += compex_wpq864
+
+define Device/edgecore_ecw5410
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Edgecore
+	DEVICE_MODEL := ECW5410
+	SOC := qcom-ipq8068
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_DTS_CONFIG := [email protected]
+	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-edgecore_ecw5410
+endef
+TARGET_DEVICES += edgecore_ecw5410
+
+define Device/linksys_ea7500-v1
+	$(call Device/LegacyImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := EA7500
+	DEVICE_VARIANT := v1
+	SOC := qcom-ipq8064
+	PAGESIZE := 2048
+	BLOCKSIZE := 128k
+	KERNEL_SIZE := 3072k
+	KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakehdr filesystem
+	UBINIZE_OPTS := -E 5
+	IMAGES := factory.bin sysupgrade.bin
+	IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += linksys_ea7500-v1
+
+define Device/linksys_ea8500
+	$(call Device/LegacyImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := EA8500
+	SOC := qcom-ipq8064
+	PAGESIZE := 2048
+	BLOCKSIZE := 128k
+	KERNEL_SIZE := 3072k
+	KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakehdr filesystem
+	BOARD_NAME := ea8500
+	SUPPORTED_DEVICES += ea8500
+	UBINIZE_OPTS := -E 5
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += linksys_ea8500
+
+define Device/meraki_mr42
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Cisco Meraki
+	DEVICE_MODEL := MR42
+	SOC := qcom-ipq8068
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_LOADADDR = 0x44208000
+	DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
+		-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
+		-kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
+		-uboot-envtools ath10k-firmware-qca9887-ct \
+		ath10k-firmware-qca99x0-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
+		kmod-leds-tlc591xx
+endef
+TARGET_DEVICES += meraki_mr42
+
+define Device/meraki_mr52
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Cisco Meraki
+	DEVICE_MODEL := MR52
+	SOC := qcom-ipq8068
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_LOADADDR = 0x44208000
+	DEVICE_DTS_CONFIG := config@2
+	DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
+		-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
+		-kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
+		-uboot-envtools ath10k-firmware-qca9887-ct \
+		ath10k-firmware-qca9984-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
+		kmod-leds-tlc591xx
+endef
+TARGET_DEVICES += meraki_mr52
+
+define Device/nec_wg2600hp
+	$(call Device/LegacyImage)
+	DEVICE_VENDOR := NEC
+	DEVICE_MODEL := Aterm WG2600HP
+	SOC := qcom-ipq8064
+	BLOCKSIZE := 64k
+	BOARD_NAME := wg2600hp
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += nec_wg2600hp
+
+define Device/nec_wg2600hp3
+	$(call Device/LegacyImage)
+	DEVICE_VENDOR := NEC Platforms
+	DEVICE_MODEL := Aterm WG2600HP3
+	SOC := qcom-ipq8062
+	BLOCKSIZE := 64k
+	IMAGES := sysupgrade.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	DEVICE_PACKAGES := -kmod-ata-ahci -kmod-ata-ahci-platform -kmod-usb-ohci -kmod-usb2 \
+		-kmod-usb-ledtrig-usbport -kmod-usb-phy-qcom-dwc3 -kmod-usb3 -kmod-usb-dwc3-qcom \
+		ath10k-firmware-qca9984-ct ipq-wifi-nec_wg2600hp3
+endef
+TARGET_DEVICES += nec_wg2600hp3
+
+define Device/netgear_d7800
+	$(call Device/DniImage)
+	DEVICE_VENDOR := NETGEAR
+	DEVICE_MODEL := Nighthawk X4 D7800
+	SOC := qcom-ipq8064
+	KERNEL_SIZE := 4096k
+	NETGEAR_BOARD_ID := D7800
+	NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := d7800
+	SUPPORTED_DEVICES += d7800
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += netgear_d7800
+
+define Device/netgear_r7500
+	$(call Device/DniImage)
+	DEVICE_VENDOR := NETGEAR
+	DEVICE_MODEL := Nighthawk X4 R7500
+	DEVICE_VARIANT := v1
+	SOC := qcom-ipq8064
+	KERNEL_SIZE := 4096k
+	NETGEAR_BOARD_ID := R7500
+	NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := r7500
+	SUPPORTED_DEVICES += r7500
+	DEVICE_PACKAGES := ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += netgear_r7500
+
+define Device/netgear_r7500v2
+	$(call Device/DniImage)
+	DEVICE_VENDOR := NETGEAR
+	DEVICE_MODEL := Nighthawk X4 R7500
+	DEVICE_VARIANT := v2
+	SOC := qcom-ipq8064
+	KERNEL_SIZE := 4096k
+	NETGEAR_BOARD_ID := R7500v2
+	NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := r7500v2
+	SUPPORTED_DEVICES += r7500v2
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += netgear_r7500v2
+
+define Device/netgear_r7800
+	$(call Device/DniImage)
+	DEVICE_VENDOR := NETGEAR
+	DEVICE_MODEL := Nighthawk X4S R7800
+	SOC := qcom-ipq8065
+	KERNEL_SIZE := 4096k
+	NETGEAR_BOARD_ID := R7800
+	NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := r7800
+	SUPPORTED_DEVICES += r7800
+	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
+endef
+TARGET_DEVICES += netgear_r7800
+
+define Device/netgear_xr500
+	$(call Device/DniImage)
+	DEVICE_VENDOR := NETGEAR
+	DEVICE_MODEL := Nighthawk XR500
+	SOC := qcom-ipq8065
+	KERNEL_SIZE := 4096k
+	NETGEAR_BOARD_ID := XR500
+	NETGEAR_HW_ID := 29764958+0+256+512+4x4+4x4+cascade
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
+endef
+TARGET_DEVICES += netgear_xr500
+
+define Device/qcom_ipq8064-ap148
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Qualcomm
+	DEVICE_MODEL := AP148
+	DEVICE_VARIANT := standard
+	SOC := qcom-ipq8064
+	DEVICE_DTS := qcom-ipq8064-ap148
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := ap148
+	SUPPORTED_DEVICES += ap148
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += qcom_ipq8064-ap148
+
+define Device/qcom_ipq8064-ap148-legacy
+	$(call Device/LegacyImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Qualcomm
+	DEVICE_MODEL := AP148
+	DEVICE_VARIANT := legacy
+	SOC := qcom-ipq8064
+	DEVICE_DTS := qcom-ipq8064-ap148
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := ap148
+	SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += qcom_ipq8064-ap148-legacy
+
+define Device/qcom_ipq8064-ap161
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Qualcomm
+	DEVICE_MODEL := AP161
+	SOC := qcom-ipq8064
+	DEVICE_DTS := qcom-ipq8064-ap161
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := ap161
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += qcom_ipq8064-ap161
+
+define Device/qcom_ipq8064-db149
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Qualcomm
+	DEVICE_MODEL := DB149
+	SOC := qcom-ipq8064
+	DEVICE_DTS := qcom-ipq8064-db149
+	KERNEL_INSTALL := 1
+	BOARD_NAME := db149
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += qcom_ipq8064-db149
+
+define Device/tplink_ad7200
+	$(call Device/TpSafeImage)
+	DEVICE_VENDOR := TP-Link
+	DEVICE_MODEL := AD7200
+	DEVICE_VARIANT := v1/v2
+	DEVICE_ALT0_VENDOR := TP-Link
+	DEVICE_ALT0_MODEL := Talon AD7200
+	DEVICE_ALT0_VARIANT := v1/v2
+	SOC := qcom-ipq8064
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	TPLINK_BOARD_ID := AD7200
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-wil6210
+endef
+TARGET_DEVICES += tplink_ad7200
+
+define Device/tplink_c2600
+	$(call Device/TpSafeImage)
+	DEVICE_VENDOR := TP-Link
+	DEVICE_MODEL := Archer C2600
+	DEVICE_VARIANT := v1
+	SOC := qcom-ipq8064
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := c2600
+	SUPPORTED_DEVICES += c2600
+	TPLINK_BOARD_ID := C2600
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += tplink_c2600
+
+define Device/tplink_vr2600v
+	DEVICE_VENDOR := TP-Link
+	DEVICE_MODEL := Archer VR2600v
+	DEVICE_VARIANT := v1
+	KERNEL_SUFFIX := -uImage
+	KERNEL = kernel-bin | append-dtb | uImage none
+	KERNEL_NAME := zImage
+	KERNEL_SIZE := 3072k
+	SOC := qcom-ipq8064
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := vr2600v
+	SUPPORTED_DEVICES += vr2600v
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+	IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += tplink_vr2600v
+
+define Device/ubnt_unifi-ac-hd
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := Ubiquiti
+	DEVICE_MODEL := UniFi AC HD
+	SOC := qcom-ipq8064
+	BLOCKSIZE := 64k
+	IMAGE_SIZE := 14784k
+	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
+	IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+TARGET_DEVICES += ubnt_unifi-ac-hd
+
+define Device/zyxel_nbg6817
+	DEVICE_VENDOR := ZyXEL
+	DEVICE_MODEL := NBG6817
+	SOC := qcom-ipq8065
+	KERNEL_SIZE := 4096k
+	BLOCKSIZE := 64k
+	BOARD_NAME := nbg6817
+	RAS_BOARD := NBG6817
+	RAS_ROOTFS_SIZE := 20934k
+	RAS_VERSION := "V1.99(OWRT.9999)C0"
+	SUPPORTED_DEVICES += nbg6817
+	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
+	$(call Device/ZyXELImage)
+endef
+TARGET_DEVICES += zyxel_nbg6817