uboot-kirkwood: refresh patches

This is only cosmetic, but the next one adding a patch here would
have to do it anyway, and thus will get a smaller diff for review
now.

Signed-off-by: Adrian Schmutzler <[email protected]>

package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch

@@ -28,13 +28,13 @@ NOTE: this patch is ready for upstream, LEDE-specific parts are in
 @@ -53,6 +53,9 @@ config TARGET_GOFLEXHOME
  config TARGET_NAS220
  	bool "BlackArmor NAS220"
-
+ 
 +config TARGET_NSA310
 +	bool "Zyxel NSA310 Board"
 +
  config TARGET_NSA310S
  	bool "Zyxel NSA310S"
-
+ 
 @@ -86,6 +89,7 @@ source "board/raidsonic/ib62x0/Kconfig"
  source "board/Seagate/dockstar/Kconfig"
  source "board/Seagate/goflexhome/Kconfig"

package/boot/uboot-kirkwood/patches/010-pogoplug_v4.patch

@@ -3,13 +3,13 @@
 @@ -25,6 +25,9 @@ config TARGET_LSXL
  config TARGET_POGO_E02
  	bool "pogo_e02 Board"
-
+ 
 +config TARGET_POGOPLUGV4
 +    bool "Pogoplug V4 Board"
 +
  config TARGET_DNS325
  	bool "dns325 Board"
-
+ 
 @@ -83,6 +86,7 @@ source "board/Marvell/guruplug/Kconfig"
  source "board/Marvell/sheevaplug/Kconfig"
  source "board/buffalo/lsxl/Kconfig"
@@ -22,11 +22,11 @@
 +++ b/arch/arm/mach-kirkwood/include/mach/kw88f6192.h
 @@ -15,6 +15,6 @@
  #define KW_REGS_PHY_BASE		KW88F6192_REGS_PHYS_BASE
-
+ 
  /* TCLK Core Clock defination */
 -#define CONFIG_SYS_TCLK	  166000000 /* 166MHz */
 +#define CONFIG_SYS_TCLK	  166666667 /* 166MHz */
-
+ 
  #endif /* _CONFIG_KW88F6192_H */
 --- a/arch/arm/mach-kirkwood/include/mach/mpp.h
 +++ b/arch/arm/mach-kirkwood/include/mach/mpp.h
@@ -35,12 +35,12 @@
  #define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 1, 0,   0,   1,   1    )
  #define MPP33_GE1_13		MPP( 33, 0x3, 0, 0, 0,   1,   1,   1    )
 +#define MPP33_SATA1_ACTn        MPP( 33, 0x5, 0, 1, 0,   1,   1,   1    )
-
+ 
  #define MPP34_GPIO		MPP( 34, 0x0, 1, 1, 0,   1,   1,   1    )
  #define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 1, 0,   0,   1,   1    )
  #define MPP34_GE1_14		MPP( 34, 0x3, 0, 0, 0,   1,   1,   1    )
 +#define MPP34_SATA1_ACTn       MPP( 34, 0x5, 0, 1, 0,   1,   1,   1    )
-
+ 
  #define MPP35_GPIO		MPP( 35, 0x0, 1, 1, 1,   1,   1,   1    )
  #define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 1, 0,   0,   1,   1    )
 --- /dev/null
@@ -630,7 +630,7 @@
  obj-$(CONFIG_MMC_SDHCI_XENON)		+= xenon_sdhci.o
  obj-$(CONFIG_MMC_SDHCI_ZYNQ)		+= zynq_sdhci.o
 +obj-$(CONFIG_KIRKWOOD_MMC)		+= kirkwood_mmc.o
-
+ 
  obj-$(CONFIG_MMC_SUNXI)			+= sunxi_mmc.o
  obj-$(CONFIG_MMC_UNIPHIER)		+= tmio-common.o uniphier-sd.o
 --- /dev/null
@@ -1123,7 +1123,7 @@
 @@ -75,4 +75,10 @@
  #define CONFIG_SYS_MAX_NAND_DEVICE     1
  #endif
-
+ 
 +/*
 + * Kirkwood MMC
 + */

package/boot/uboot-kirkwood/patches/110-dockstar.patch

@@ -5,7 +5,7 @@
  #define CONFIG_KW88F6281	1	/* SOC Name */
  #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
 +#define CONFIG_SYS_MVFS
-
+ 
  /*
   * mv-common.h should be defined after CMD configs since it used them
 @@ -37,19 +38,15 @@
@@ -20,7 +20,7 @@
 +	"ubi part ubi; " \
 +	"ubi read 0x800000 kernel; " \
 +	"bootm 0x800000"
-
+ 
  #define CONFIG_EXTRA_ENV_SETTINGS \
 -	"console=console=ttyS0,115200\0" \
 -	"mtdids=nand0=orion_nand\0" \
@@ -32,7 +32,7 @@
 +	"mtdids=nand0=orion_nand\0"		\
 +	"mtdparts="CONFIG_MTDPARTS_DEFAULT "\0"	\
 +	"bootargs_root=\0"
-
+ 
  /*
   * Ethernet Driver configuration
 --- a/configs/dockstar_defconfig

package/boot/uboot-kirkwood/patches/120-iconnect.patch

@@ -10,7 +10,7 @@
 +	"ubi part ubi; " \
 +	"ubi read 0x800000 kernel; " \
  	"bootm 0x800000"
-
+ 
  #define CONFIG_EXTRA_ENV_SETTINGS \
  	"console=console=ttyS0,115200\0"	\
  	"mtdids=nand0=orion_nand\0"		\
@@ -19,7 +19,7 @@
 -	"bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
 +	"mtdparts="CONFIG_MTDPARTS_DEFAULT "\0"	\
 +	"bootargs_root=\0"
-
+ 
  /*
   * Ethernet driver configuration
 --- a/configs/iconnect_defconfig

package/boot/uboot-kirkwood/patches/130-ib62x0.patch

@@ -14,7 +14,7 @@
 +	"ubi part ubi; " \
 +	"ubi read 0x800000 kernel; " \
 +	"bootm 0x800000"
-
+ 
  #define CONFIG_EXTRA_ENV_SETTINGS \
  	"console=console=ttyS0,115200\0"				\
  	"mtdids=nand0=orion_nand\0"					\
@@ -24,7 +24,7 @@
 -	"bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
 +	"mtdparts="CONFIG_MTDPARTS_DEFAULT "\0"			\
 +	"bootargs_root=\0"
-
+ 
  /*
   * Ethernet driver configuration
 --- a/configs/ib62x0_defconfig

package/boot/uboot-kirkwood/patches/140-pogoplug_e02.patch

@@ -12,7 +12,7 @@
 +	"ubifsmount ubi:rootfs; "					\
 +	"ubi read 0x800000 kernel; "					\
 +	"bootm 0x800000"
-
+ 
  #define CONFIG_EXTRA_ENV_SETTINGS \
 -	"mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
 -	"32M(rootfs),-(data)\0"\
@@ -24,7 +24,7 @@
 +	"mtdids=nand0=orion_nand\0"		\
 +	"mtdparts="CONFIG_MTDPARTS_DEFAULT "\0"	\
 +	"bootargs_root=\0"
-
+ 
  /*
   * Ethernet Driver configuration
 --- a/configs/pogo_e02_defconfig

package/boot/uboot-kirkwood/patches/150-goflexhome.patch

@@ -10,7 +10,7 @@
 +	"ubi part ubi; " \
 +	"ubi read 0x800000 kernel; " \
  	"bootm 0x800000"
-
+ 
  #define CONFIG_EXTRA_ENV_SETTINGS \
  	"console=console=ttyS0,115200\0" \
  	"mtdids=nand0=orion_nand\0" \
@@ -19,7 +19,7 @@
 -	"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
 +	"mtdparts="CONFIG_MTDPARTS_DEFAULT "\0" \
 +	"bootargs_root=\0"
-
+ 
  /*
   * Ethernet Driver configuration
 --- a/configs/goflexhome_defconfig

package/boot/uboot-kirkwood/patches/200-openwrt-config.patch

@@ -3,7 +3,7 @@
 @@ -107,4 +107,7 @@ source "board/alliedtelesis/SBx81LIFXCAT
  source "board/Marvell/db-88f6281-bp/Kconfig"
  source "board/checkpoint/l-50/Kconfig"
-
+ 
 +config SECOND_STAGE
 +	bool "OpenWrt second stage hack"
 +
@@ -13,7 +13,7 @@
 @@ -60,4 +60,6 @@
   * File system
   */
-
+ 
 +#include "openwrt-kirkwood-common.h"
 +
  #endif /* _CONFIG_DOCKSTAR_H */
@@ -22,7 +22,7 @@
 @@ -77,4 +77,6 @@
  #define CONFIG_RTC_MV
  #endif /* CONFIG_CMD_DATE */
-
+ 
 +#include "openwrt-kirkwood-common.h"
 +
  #endif /* _CONFIG_IB62x0_H */
@@ -31,7 +31,7 @@
 @@ -67,4 +67,6 @@
   * File system
   */
-
+ 
 +#include "openwrt-kirkwood-common.h"
 +
  #endif /* _CONFIG_ICONNECT_H */
@@ -40,7 +40,7 @@
 @@ -12,6 +12,8 @@
  #ifndef _CONFIG_L50_H
  #define _CONFIG_L50_H
-
+ 
 +#include "openwrt-kirkwood-common.h"
 +
  /*
@@ -85,7 +85,7 @@
 @@ -66,4 +66,6 @@
   * File system
   */
-
+ 
 +#include "openwrt-kirkwood-common.h"
 +
  #endif /* _CONFIG_POGO_E02_H */
@@ -94,7 +94,7 @@
 @@ -85,4 +85,6 @@
  #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  #endif /*CONFIG_MVSATA_IDE*/
-
+ 
 +#include "openwrt-kirkwood-common.h"
 +
  #endif /* _CONFIG_GOFLEXHOME_H */
@@ -103,7 +103,7 @@
 @@ -100,4 +100,6 @@
  #define CONFIG_RTC_MV
  #endif /* CONFIG_CMD_DATE */
-
+ 
 +#include "openwrt-kirkwood-common.h"
 +
  #endif /* _CONFIG_NSA310_H */
@@ -200,13 +200,13 @@
 @@ -63,4 +63,6 @@
  #define CONFIG_RTC_MV
  #endif /* CONFIG_CMD_DATE */
-
+ 
 +#include "openwrt-kirkwood-common.h"
 +
  #endif /* _CONFIG_NSA310S_H */
 --- a/configs/sheevaplug_defconfig
 +++ b/configs/sheevaplug_defconfig
-@@ -49,4 +49,7 @@
+@@ -49,4 +49,7 @@ CONFIG_USB=y
  CONFIG_DM_USB=y
  CONFIG_USB_EHCI_HCD=y
  CONFIG_USB_STORAGE=y

package/boot/uboot-kirkwood/patches/701-phy-mv88e61xx-add-support-for-RGMII-TX-RX-delay.patch

@@ -17,8 +17,6 @@ Signed-off-by: Pawel Dembicki <[email protected]>
  drivers/net/phy/mv88e61xx.c | 11 ++++++++++-
  1 file changed, 10 insertions(+), 1 deletion(-)
 
-diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c
-index 5aff7ed397..889327639d 100644
 --- a/drivers/net/phy/mv88e61xx.c
 +++ b/drivers/net/phy/mv88e61xx.c
 @@ -94,6 +94,8 @@
@@ -30,7 +28,7 @@ index 5aff7ed397..889327639d 100644
  #define PORT_REG_PHYS_CTRL_PCS_AN_EN	BIT(10)
  #define PORT_REG_PHYS_CTRL_PCS_AN_RST	BIT(9)
  #define PORT_REG_PHYS_CTRL_FC_VALUE	BIT(7)
-@@ -747,9 +749,16 @@ static int mv88e61xx_fixed_port_setup(struct phy_device *phydev, u8 port)
+@@ -747,9 +749,16 @@ static int mv88e61xx_fixed_port_setup(st
  		       PORT_REG_PHYS_CTRL_SPD1000;
  	}
  
@@ -48,6 +46,3 @@ index 5aff7ed397..889327639d 100644
  
  	return mv88e61xx_port_write(phydev, port, PORT_REG_PHYS_CTRL,
  				   val);
--- 
-2.20.1
-

package/boot/uboot-kirkwood/patches/702-phy-mv88e61xx-add-support-for-MV88E6171.patch

@@ -16,8 +16,6 @@ Signed-off-by: Pawel Dembicki <[email protected]>
  drivers/net/phy/mv88e61xx.c | 14 ++++++++++++++
  1 file changed, 14 insertions(+)
 
-diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c
-index 889327639d..e0b648a54e 100644
 --- a/drivers/net/phy/mv88e61xx.c
 +++ b/drivers/net/phy/mv88e61xx.c
 @@ -180,6 +180,7 @@
@@ -28,7 +26,7 @@ index 889327639d..e0b648a54e 100644
  #define PORT_SWITCH_ID_6172		0x1720
  #define PORT_SWITCH_ID_6176		0x1760
  #define PORT_SWITCH_ID_6220		0x2200
-@@ -997,6 +998,7 @@ static int mv88e61xx_probe(struct phy_device *phydev)
+@@ -997,6 +998,7 @@ static int mv88e61xx_probe(struct phy_de
  	switch (priv->id) {
  	case PORT_SWITCH_ID_6096:
  	case PORT_SWITCH_ID_6097:
@@ -36,7 +34,7 @@ index 889327639d..e0b648a54e 100644
  	case PORT_SWITCH_ID_6172:
  	case PORT_SWITCH_ID_6176:
  	case PORT_SWITCH_ID_6240:
-@@ -1152,6 +1154,17 @@ static struct phy_driver mv88e61xx_driver = {
+@@ -1152,6 +1154,17 @@ static struct phy_driver mv88e61xx_drive
  	.shutdown = &genphy_shutdown,
  };
  
@@ -54,7 +52,7 @@ index 889327639d..e0b648a54e 100644
  static struct phy_driver mv88e609x_driver = {
  	.name = "Marvell MV88E609x",
  	.uid = 0x1410c89,
-@@ -1177,6 +1190,7 @@ static struct phy_driver mv88e6071_driver = {
+@@ -1177,6 +1190,7 @@ static struct phy_driver mv88e6071_drive
  int phy_mv88e61xx_init(void)
  {
  	phy_register(&mv88e61xx_driver);
@@ -62,6 +60,3 @@ index 889327639d..e0b648a54e 100644
  	phy_register(&mv88e609x_driver);
  	phy_register(&mv88e6071_driver);
  
--- 
-2.20.1
-