uboot-sunxi: bump to 2020.01

Refreshed patches, removed following, probably obsolete patches:

 221-compatible-old-dtc.patch
 240-sun50i-h5-Orange-Pi-Zero-Plus-Fix-SdCard-detection.patch

Signed-off-by: Petr Štetiar <[email protected]>

package/boot/uboot-sunxi/Makefile

@@ -9,9 +9,9 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
-PKG_VERSION:=2019.01
+PKG_VERSION:=2020.01
 
-PKG_HASH:=50bd7e5a466ab828914d080d5f6a432345b500e8fba1ad3b7b61e95e60d51c22
+PKG_HASH:=aa453c603208b1b27bd03525775a7f79b443adec577fdc6e8f06974025a135f1
 
 PKG_MAINTAINER:=Zoltan HERPAI <[email protected]>
 

package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/dts/Makefile
 +++ b/arch/arm/dts/Makefile
-@@ -313,6 +313,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
+@@ -446,6 +446,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
  	sun6i-a31-m9.dtb \
  	sun6i-a31-mele-a1000g-quad.dtb \
  	sun6i-a31-mixtile-loftq.dtb \
@@ -358,7 +358,7 @@
 +CONFIG_SUNXI_SPI=y
 --- a/arch/arm/mach-sunxi/Kconfig
 +++ b/arch/arm/mach-sunxi/Kconfig
-@@ -875,6 +875,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
+@@ -895,6 +895,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
  	Set the SCL pin for the LCD i2c interface. This takes a string in the
  	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
  

package/boot/uboot-sunxi/patches/062-A20-improve-gmac-upload.patch

@@ -2,7 +2,7 @@
 
 --- a/configs/A20-OLinuXino-Lime2_defconfig
 +++ b/configs/A20-OLinuXino-Lime2_defconfig
-@@ -25,6 +25,7 @@ CONFIG_ETH_DESIGNWARE=y
+@@ -26,6 +26,7 @@ CONFIG_ETH_DESIGNWARE=y
  CONFIG_RGMII=y
  CONFIG_MII=y
  CONFIG_SUN7I_GMAC=y

package/boot/uboot-sunxi/patches/063-fix-lime2-revK-add-micrel-PHY.patch

@@ -1,17 +1,17 @@
 --- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig
 +++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
-@@ -8,6 +8,8 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+@@ -9,6 +9,8 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
  CONFIG_USB0_VBUS_PIN="PC17"
  CONFIG_USB0_VBUS_DET="PH5"
  CONFIG_I2C1_ENABLE=y
 +CONFIG_PHY_MICREL=y
 +CONFIG_PHY_MICREL_KSZ90X1=y
  CONFIG_SATAPWR="PC3"
+ CONFIG_SPL_SPI_SUNXI=y
  CONFIG_AHCI=y
- CONFIG_NR_DRAM_BANKS=1
 --- a/configs/A20-OLinuXino-Lime2_defconfig
 +++ b/configs/A20-OLinuXino-Lime2_defconfig
-@@ -7,6 +7,8 @@ CONFIG_MMC0_CD_PIN="PH1"
+@@ -8,6 +8,8 @@ CONFIG_MMC0_CD_PIN="PH1"
  CONFIG_USB0_VBUS_PIN="PC17"
  CONFIG_USB0_VBUS_DET="PH5"
  CONFIG_I2C1_ENABLE=y
@@ -19,10 +19,10 @@
 +CONFIG_PHY_MICREL_KSZ90X1=y
  CONFIG_SATAPWR="PC3"
  CONFIG_AHCI=y
- CONFIG_NR_DRAM_BANKS=1
+ # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 --- a/drivers/net/phy/micrel_ksz90x1.c
 +++ b/drivers/net/phy/micrel_ksz90x1.c
-@@ -13,6 +13,8 @@
+@@ -14,6 +14,8 @@
  #include <errno.h>
  #include <micrel.h>
  #include <phy.h>
@@ -31,7 +31,7 @@
  
  /*
   * KSZ9021 - KSZ9031 common
-@@ -329,6 +331,10 @@ static int ksz9031_phy_extwrite(struct p
+@@ -344,6 +346,10 @@ static int ksz9031_phy_extwrite(struct p
  static int ksz9031_config(struct phy_device *phydev)
  {
  	int ret;

package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch

@@ -28,5 +28,5 @@ More specifically, the following settings are now used:
 +		k = 4;
 +		m = 2;
  	} else if (clk > 768000000) {
- 		k = 3;
+ 		k = 4;
  		m = 2;

package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch

@@ -6,7 +6,7 @@ Subject: sun6i: define alternate-function for UART2 on GPG
 
 --- a/arch/arm/include/asm/arch-sunxi/gpio.h
 +++ b/arch/arm/include/asm/arch-sunxi/gpio.h
-@@ -186,6 +186,7 @@ enum sunxi_gpio_number {
+@@ -190,6 +190,7 @@ enum sunxi_gpio_number {
  #define SUN6I_GPG_SDC1		2
  #define SUN8I_GPG_SDC1		2
  #define SUN6I_GPG_TWI3		2

package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch

@@ -6,7 +6,7 @@ Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7)
 
 --- a/arch/arm/mach-sunxi/board.c
 +++ b/arch/arm/mach-sunxi/board.c
-@@ -127,6 +127,10 @@ static int gpio_init(void)
+@@ -129,6 +129,10 @@ static int gpio_init(void)
  	sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
  	sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
  	sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
@@ -19,7 +19,7 @@ Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7)
  	sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2);
 --- a/include/configs/sunxi-common.h
 +++ b/include/configs/sunxi-common.h
-@@ -258,6 +258,8 @@ extern int soft_i2c_gpio_scl;
+@@ -244,6 +244,8 @@ extern int soft_i2c_gpio_scl;
  #endif
  #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
  #define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28400:115200"

package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch

@@ -6,7 +6,7 @@ Subject: ARM: sunxi: Make CONS_INDEX configurable
 
 --- a/arch/arm/mach-sunxi/Kconfig
 +++ b/arch/arm/mach-sunxi/Kconfig
-@@ -538,6 +538,14 @@ config SYS_BOARD
+@@ -558,6 +558,14 @@ config SYS_BOARD
  config SYS_SOC
  	default "sunxi"
  

package/boot/uboot-sunxi/patches/200-mkimage-check-environment-for-dtc-binary-location.patch

@@ -17,7 +17,7 @@ Cc: Simon Glass <[email protected]>
 
 --- a/tools/fit_image.c
 +++ b/tools/fit_image.c
-@@ -656,9 +656,14 @@ static int fit_handle_file(struct image_
+@@ -662,9 +662,14 @@ static int fit_handle_file(struct image_
  		}
  		*cmd = '\0';
  	} else if (params->datafile) {

package/boot/uboot-sunxi/patches/210-sunxi-deactivate-binman.patch

@@ -12,7 +12,7 @@ old way of generating images.
 
 --- a/Makefile
 +++ b/Makefile
-@@ -1344,8 +1344,10 @@ endif
+@@ -1525,8 +1525,10 @@ endif
  
  ifneq ($(CONFIG_ARCH_SUNXI),)
  ifeq ($(CONFIG_ARM64),)
@@ -27,7 +27,7 @@ old way of generating images.
  	$(call if_changed,cat)
 --- a/arch/arm/Kconfig
 +++ b/arch/arm/Kconfig
-@@ -842,7 +842,6 @@ config ARCH_SOCFPGA
+@@ -945,7 +945,6 @@ config ARCH_SOCFPGA
  
  config ARCH_SUNXI
  	bool "Support sunxi (Allwinner) SoCs"

package/boot/uboot-sunxi/patches/221-compatible-old-dtc.patch

@@ -1,52 +0,0 @@
-Revert the commit c0e032e0090d65 ("scripts/dtc: Update to upstream 
-version v1.4.3")
-OpenWrt uses the dtc from the kernel also in u-boot, but when we compile 
-against kernel 4.9 we run into some errors because it is too old now. 
-Add the options only when they are supported to make it compatible with 
-dtc from kernel 4.9.
-
---- a/scripts/Kbuild.include
-+++ b/scripts/Kbuild.include
-@@ -173,6 +173,11 @@ ld-version = $(shell $(LD) --version | $
- # Usage:  $(call ld-ifversion, -ge, 22252, y)
- ld-ifversion = $(shell [ $(ld-version) $(1) $(2) ] && echo $(3) || echo $(4))
- 
-+# dtc-option
-+# Usage:  DTC_FLAGS += $(call dtc-option,-Wno-unit_address_vs_reg)
-+dtc-option = $(call try-run,\
-+	echo '/dts-v1/; / {};' | $(DTC) $(1),$(1),$(2))
-+
- ######
- 
- ###
---- a/scripts/Makefile.extrawarn
-+++ b/scripts/Makefile.extrawarn
-@@ -56,8 +56,8 @@ endif
- 
- KBUILD_CFLAGS += $(warning)
- 
--dtc-warning-2 += -Wnode_name_chars_strict
--dtc-warning-2 += -Wproperty_name_chars_strict
-+dtc-warning-2 += $(call dtc-option,-Wnode_name_chars_strict)
-+dtc-warning-2 += $(call dtc-option,-Wproperty_name_chars_strict)
- 
- dtc-warning := $(dtc-warning-$(findstring 1, $(KBUILD_ENABLE_EXTRA_GCC_CHECKS)))
- dtc-warning += $(dtc-warning-$(findstring 2, $(KBUILD_ENABLE_EXTRA_GCC_CHECKS)))
-@@ -68,11 +68,11 @@ DTC_FLAGS += $(dtc-warning)
- else
- 
- # Disable noisy checks by default
--DTC_FLAGS += -Wno-unit_address_vs_reg
--DTC_FLAGS += -Wno-simple_bus_reg
--DTC_FLAGS += -Wno-unit_address_format
--DTC_FLAGS += -Wno-pci_bridge
--DTC_FLAGS += -Wno-pci_device_bus_num
--DTC_FLAGS += -Wno-pci_device_reg
-+DTC_FLAGS += $(call dtc-option,-Wno-unit_address_vs_reg)
-+DTC_FLAGS += $(call dtc-option,-Wno-simple_bus_reg)
-+DTC_FLAGS += $(call dtc-option,-Wno-unit_address_format)
-+DTC_FLAGS += $(call dtc-option,-Wno-pci_bridge)
-+DTC_FLAGS += $(call dtc-option,-Wno-pci_device_bus_num)
-+DTC_FLAGS += $(call dtc-option,-Wno-pci_device_reg)
- 
- endif

package/boot/uboot-sunxi/patches/230-disable-axp209-on-a13-olinuxino.diff

@@ -1,6 +1,6 @@
 --- a/configs/A13-OLinuXino_defconfig
 +++ b/configs/A13-OLinuXino_defconfig
-@@ -7,7 +7,6 @@ CONFIG_DRAM_EMR1=0
+@@ -8,7 +8,6 @@ CONFIG_DRAM_EMR1=0
  CONFIG_MMC0_CD_PIN="PG0"
  CONFIG_USB0_VBUS_DET="PG1"
  CONFIG_USB1_VBUS_PIN="PG11"
@@ -8,12 +8,12 @@
  # CONFIG_VIDEO_HDMI is not set
  CONFIG_VIDEO_VGA_VIA_LCD=y
  CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
-@@ -24,7 +23,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y
- CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
+@@ -25,7 +24,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ol
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  CONFIG_DFU_RAM=y
  CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 -CONFIG_AXP_ALDO3_VOLT=3300
 +CONFIG_SUNXI_NO_PMIC=y
  CONFIG_CONS_INDEX=2
  CONFIG_USB_EHCI_HCD=y
- CONFIG_USB_MUSB_GADGET=y
+ CONFIG_USB_OHCI_HCD=y

package/boot/uboot-sunxi/patches/240-sun50i-h5-Orange-Pi-Zero-Plus-Fix-SdCard-detection.patch

@@ -1,28 +0,0 @@
-From ad320d4d6ad03af5ff730546113d53a47ef6a22e Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <[email protected]>
-Date: Sun, 13 Jan 2019 17:05:09 +0100
-Subject: [PATCH] sun50i: h5: Orange Pi Zero Plus: Fix SdCard detection
-
-The Detection pin is at PF6 and not at PH13 like defined before. I
-checked the schematics and now I am am not seeing this error message any
-more:
-Loading Environment from FAT... Card did not respond to voltage select!
-
-Fixes: 76d69eb01de ("sun50i: h5: Add initial Orange Pi Zero Plus support")
-Signed-off-by: Hauke Mehrtens <[email protected]>
----
- configs/orangepi_zero_plus_defconfig | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/configs/orangepi_zero_plus_defconfig
-+++ b/configs/orangepi_zero_plus_defconfig
-@@ -4,8 +4,7 @@ CONFIG_SPL=y
- CONFIG_MACH_SUN50I_H5=y
- CONFIG_DRAM_CLK=624
- CONFIG_DRAM_ZQ=3881977
--CONFIG_MMC0_CD_PIN="PH13"
--CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-+CONFIG_MMC0_CD_PIN="PF6"
- CONFIG_NR_DRAM_BANKS=1
- # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
- # CONFIG_CMD_FLASH is not set