ath79: add missing symbols by refreshing kernel configs

Some symbols are outdated or missing due to daily kernel bumps. It's
better to re-add them. All configs are automatically refreshed by
'make kernel_oldconfig CONFIG_TARGET=taget' and
'make kernel_oldconfig CONFIG_TARGET=subtarget'

Signed-off-by: Shiji Yang <[email protected]>

target/linux/ath79/config-5.15

@@ -41,6 +41,7 @@ CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DTC=y
 CONFIG_EARLY_PRINTK=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
 CONFIG_FIXED_PHY=y
 CONFIG_FWNODE_MDIO=y
 CONFIG_FW_LOADER_PAGED_BUF=y
@@ -80,7 +81,6 @@ CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT_MAP=y
 CONFIG_HZ_PERIODIC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_IRQCHIP=y
 CONFIG_IRQ_DOMAIN=y
@@ -158,7 +158,6 @@ CONFIG_PHYLIB=y
 # CONFIG_PHY_AR7200_USB is not set
 # CONFIG_PHY_ATH79_USB is not set
 CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_PISTACHIO is not set
 CONFIG_PTP_1588_CLOCK_OPTIONAL=y
 CONFIG_RATIONAL=y
 CONFIG_REGMAP=y

target/linux/ath79/generic/config-default

@@ -6,6 +6,7 @@ CONFIG_GPIO_WATCHDOG=y
 CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
 CONFIG_I2C=y
 CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_GPIO=y
 CONFIG_INTEL_XWAY_PHY=y
@@ -20,6 +21,7 @@ CONFIG_NVMEM_U_BOOT_ENV=y
 CONFIG_PHY_AR7100_USB=y
 CONFIG_PHY_AR7200_USB=y
 CONFIG_REALTEK_PHY=y
+CONFIG_REGMAP_I2C=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_VITESSE_PHY=y
 CONFIG_WATCHDOG_CORE=y

target/linux/ath79/mikrotik/config-default

@@ -1,17 +1,21 @@
 CONFIG_CRC16=y
 CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_ZSTD=y
 CONFIG_GPIO_LATCH=y
-CONFIG_GPIO_RB91X_KEY=y
 CONFIG_GPIO_RB4XX=y
+CONFIG_GPIO_RB91X_KEY=y
 CONFIG_GPIO_WATCHDOG=y
 CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
+CONFIG_GRO_CELLS=y
 CONFIG_LEDS_RESET=y
+CONFIG_LZO_COMPRESS=y
 CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_GPIO=y
+CONFIG_MFD_CORE=y
 CONFIG_MFD_RB4XX_CPLD=y
 CONFIG_MIKROTIK=y
 CONFIG_MIKROTIK_RB_SYSFS=y
-CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_AR934X=y
 CONFIG_MTD_NAND_CORE=y
 CONFIG_MTD_NAND_ECC=y
@@ -24,17 +28,22 @@ CONFIG_MTD_SPI_NAND=y
 CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE=y
 CONFIG_MTD_SPLIT_MINOR_FW=y
 CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
 CONFIG_MTD_UBI_BLOCK=y
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_NET_DEVLINK=y
 CONFIG_NET_DSA=y
 CONFIG_NET_SWITCHDEV=y
-CONFIG_PCI_AR71XX=y
+CONFIG_PHYLINK=y
 CONFIG_PHY_AR7100_USB=y
 CONFIG_PHY_AR7200_USB=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_SGL_ALLOC=y
 CONFIG_SPI_RB4XX=y
 CONFIG_UBIFS_FS=y
 CONFIG_WATCHDOG_CORE=y
+CONFIG_XXHASH=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y

target/linux/ath79/nand/config-default

@@ -1,13 +1,14 @@
+CONFIG_BCH=y
 CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_HASH_INFO=y
 CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_ZSTD=y
 CONFIG_LZO_COMPRESS=y
 CONFIG_LZO_DECOMPRESS=y
-CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_AR934X=y
 CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND_ECC_SW_BCH=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_SPI_NAND=y
@@ -21,5 +22,8 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_SGL_ALLOC=y
 CONFIG_UBIFS_FS=y
+CONFIG_XXHASH=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y

target/linux/ath79/tiny/config-default

@@ -1,9 +1,9 @@
+CONFIG_GRO_CELLS=y
 CONFIG_LEDS_RESET=y
 CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
 CONFIG_NET_DEVLINK=y
 CONFIG_NET_DSA=y
 CONFIG_NET_DSA_MV88E6060=y
-# CONFIG_NET_DSA_TAG_QCA is not set
 CONFIG_NET_DSA_TAG_TRAILER=y
 CONFIG_NET_SWITCHDEV=y
 CONFIG_PHYLINK=y