rtl8366: make it available on all platforms

SVN-Revision: 19329

target/linux/ar71xx/patches-2.6.30/101-ksz8041_phy_driver.patch

@@ -14,9 +14,9 @@
  	depends on PHYLIB=y
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
- obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
- obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+@@ -22,6 +22,7 @@ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+ obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
+ obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
 +obj-$(CONFIG_MICREL)		+= micrel.o
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o

target/linux/ar71xx/patches-2.6.31/101-ksz8041_phy_driver.patch

@@ -14,9 +14,9 @@
  	depends on PHYLIB=y
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
- obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
- obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+@@ -22,6 +22,7 @@ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+ obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
+ obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
 +obj-$(CONFIG_MICREL)		+= micrel.o
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o

target/linux/ar71xx/patches-2.6.32/101-ksz8041_phy_driver.patch

@@ -14,9 +14,9 @@
  	depends on PHYLIB=y
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
- obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
- obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+@@ -23,6 +23,7 @@ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+ obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
+ obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
 +obj-$(CONFIG_MICREL)		+= micrel.o
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o

target/linux/generic-2.6/config-2.6.30

@@ -1707,6 +1707,9 @@ CONFIG_RTC_LIB=y
 # CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_RTL8306_PHY is not set
+# CONFIG_RTL8366S_PHY is not set
+# CONFIG_RTL8366S_PHY_DEBUG_FS is not set
+# CONFIG_RTL8366_SMI is not set
 CONFIG_RT_MUTEXES=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_S2IO is not set

target/linux/generic-2.6/config-2.6.31

@@ -1759,6 +1759,9 @@ CONFIG_RTC_LIB=y
 # CONFIG_RTL8187SE is not set
 # CONFIG_RTL8192SU is not set
 # CONFIG_RTL8306_PHY is not set
+# CONFIG_RTL8366S_PHY is not set
+# CONFIG_RTL8366S_PHY_DEBUG_FS is not set
+# CONFIG_RTL8366_SMI is not set
 CONFIG_RT_MUTEXES=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_S2IO is not set

target/linux/generic-2.6/config-2.6.32

@@ -1787,6 +1787,9 @@ CONFIG_RTC_LIB=y
 # CONFIG_RTL8192E is not set
 # CONFIG_RTL8192SU is not set
 # CONFIG_RTL8306_PHY is not set
+# CONFIG_RTL8366S_PHY is not set
+# CONFIG_RTL8366S_PHY_DEBUG_FS is not set
+# CONFIG_RTL8366_SMI is not set
 CONFIG_RT_MUTEXES=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_S2IO is not set

target/linux/ar71xx/patches-2.6.30/204-rtl8366-smi-driver.patch → target/linux/generic-2.6/patches-2.6.30/691-phy_rtl8366.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -140,4 +140,25 @@ config MDIO_GPIO
+@@ -135,4 +135,25 @@ config MDIO_GPIO
  	  To compile this driver as a module, choose M here: the module
  	  will be called mdio-gpio.
  
@@ -35,5 +35,5 @@
 +obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
 +obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
- obj-$(CONFIG_MICREL)		+= micrel.o
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o

target/linux/ar71xx/patches-2.6.31/204-rtl8366-smi-driver.patch → target/linux/generic-2.6/patches-2.6.31/691-phy_rtl8366.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -140,4 +140,25 @@ config MDIO_GPIO
+@@ -135,4 +135,25 @@ config MDIO_GPIO
  	  To compile this driver as a module, choose M here: the module
  	  will be called mdio-gpio.
  
@@ -35,5 +35,5 @@
 +obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
 +obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
- obj-$(CONFIG_MICREL)		+= micrel.o
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o

target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch → target/linux/generic-2.6/patches-2.6.32/691-phy_rtl8366.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -146,4 +146,25 @@ config MDIO_GPIO
+@@ -141,4 +141,25 @@ config MDIO_GPIO
  	  To compile this driver as a module, choose M here: the module
  	  will be called mdio-gpio.
  
@@ -35,5 +35,5 @@
 +obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
 +obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
- obj-$(CONFIG_MICREL)		+= micrel.o
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o