hostapd: sync config with default configuration

This replaces the configuration files with the versions from the hostapd
project and the adaptions done by OpenWrt.

The resulting binaries should be the same.

Signed-off-by: Hauke Mehrtens <[email protected]>

package/network/services/hostapd/files/hostapd-full.config

@@ -50,11 +50,7 @@ CONFIG_IAPP=y
 # WPA2/IEEE 802.11i RSN pre-authentication
 CONFIG_RSN_PREAUTH=y
 
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
 # IEEE 802.11w (management frame protection)
-# Driver support is also needed for IEEE 802.11w.
 #CONFIG_IEEE80211W=y
 
 # Integrated EAP server
@@ -374,6 +370,10 @@ CONFIG_TAXONOMY=y
 # Experimental implementation of draft-harkins-owe-07.txt
 #CONFIG_OWE=y
 
+# Override default value for the wpa_disable_eapol_key_retries configuration
+# parameter. See that parameter in hostapd.conf for more details.
+#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
+
 # uBus IPC/RPC System
 # Services can connect to the bus and provide methods
 # that can be called by other services or clients.

package/network/services/hostapd/files/hostapd-mini.config

@@ -50,11 +50,7 @@ CONFIG_DRIVER_NL80211=y
 # WPA2/IEEE 802.11i RSN pre-authentication
 CONFIG_RSN_PREAUTH=y
 
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
 # IEEE 802.11w (management frame protection)
-# Driver support is also needed for IEEE 802.11w.
 #CONFIG_IEEE80211W=y
 
 # Integrated EAP server
@@ -374,6 +370,10 @@ CONFIG_TLS=internal
 # Experimental implementation of draft-harkins-owe-07.txt
 #CONFIG_OWE=y
 
+# Override default value for the wpa_disable_eapol_key_retries configuration
+# parameter. See that parameter in hostapd.conf for more details.
+#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
+
 # uBus IPC/RPC System
 # Services can connect to the bus and provide methods
 # that can be called by other services or clients.

package/network/services/hostapd/files/wpa_supplicant-full.config

@@ -73,6 +73,12 @@ CONFIG_DRIVER_NL80211=y
 # Driver interface for wired Ethernet drivers
 CONFIG_DRIVER_WIRED=y
 
+# Driver interface for MACsec capable Qualcomm Atheros drivers
+#CONFIG_DRIVER_MACSEC_QCA=y
+
+# Driver interface for Linux MACsec drivers
+#CONFIG_DRIVER_MACSEC_LINUX=y
+
 # Driver interface for the Broadcom RoboSwitch family
 #CONFIG_DRIVER_ROBOSWITCH=y
 
@@ -83,8 +89,8 @@ CONFIG_DRIVER_WIRED=y
 #LIBS += -lsocket -ldlpi -lnsl
 #LIBS_c += -lsocket
 
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
+# MACsec is included)
 CONFIG_IEEE8021X_EAPOL=y
 
 # EAP-MD5
@@ -166,6 +172,9 @@ CONFIG_WPS=y
 # EAP-EKE
 #CONFIG_EAP_EKE=y
 
+# MACsec
+#CONFIG_MACSEC=y
+
 # PKCS#12 (PFX) support (used to read private key and certificate file from
 # a file that usually has extension .p12 or .pfx)
 CONFIG_PKCS12=y
@@ -288,9 +297,6 @@ CONFIG_BACKEND=file
 # bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
 #CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
 
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
 # IEEE 802.11w (management frame protection), also known as PMF
 # Driver support is also needed for IEEE 802.11w.
 #CONFIG_IEEE80211W=y
@@ -378,10 +384,6 @@ CONFIG_INTERNAL_LIBTOMMATH_FAST=y
 # IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
 CONFIG_IEEE80211R=y
 
-# IEEE Std 802.11r-2008 (Fast BSS Transition) for AP mode (implies
-# CONFIG_IEEE80211R).
-#CONFIG_IEEE80211R_AP=y
-
 # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
 #CONFIG_DEBUG_FILE=y
 

package/network/services/hostapd/files/wpa_supplicant-mini.config

@@ -73,6 +73,12 @@ CONFIG_DRIVER_NL80211=y
 # Driver interface for wired Ethernet drivers
 CONFIG_DRIVER_WIRED=y
 
+# Driver interface for MACsec capable Qualcomm Atheros drivers
+#CONFIG_DRIVER_MACSEC_QCA=y
+
+# Driver interface for Linux MACsec drivers
+#CONFIG_DRIVER_MACSEC_LINUX=y
+
 # Driver interface for the Broadcom RoboSwitch family
 #CONFIG_DRIVER_ROBOSWITCH=y
 
@@ -83,8 +89,8 @@ CONFIG_DRIVER_WIRED=y
 #LIBS += -lsocket -ldlpi -lnsl
 #LIBS_c += -lsocket
 
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
+# MACsec is included)
 #CONFIG_IEEE8021X_EAPOL=y
 
 # EAP-MD5
@@ -166,6 +172,9 @@ CONFIG_DRIVER_WIRED=y
 # EAP-EKE
 #CONFIG_EAP_EKE=y
 
+# MACsec
+#CONFIG_MACSEC=y
+
 # PKCS#12 (PFX) support (used to read private key and certificate file from
 # a file that usually has extension .p12 or .pfx)
 #CONFIG_PKCS12=y
@@ -288,9 +297,6 @@ CONFIG_BACKEND=file
 # bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
 #CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
 
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-#CONFIG_PEERKEY=y
-
 # IEEE 802.11w (management frame protection), also known as PMF
 # Driver support is also needed for IEEE 802.11w.
 #CONFIG_IEEE80211W=y
@@ -378,10 +384,6 @@ CONFIG_TLS=internal
 # IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
 #CONFIG_IEEE80211R=y
 
-# IEEE Std 802.11r-2008 (Fast BSS Transition) for AP mode (implies
-# CONFIG_IEEE80211R).
-#CONFIG_IEEE80211R_AP=y
-
 # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
 #CONFIG_DEBUG_FILE=y
 

package/network/services/hostapd/files/wpa_supplicant-p2p.config

@@ -73,6 +73,12 @@ CONFIG_DRIVER_NL80211=y
 # Driver interface for wired Ethernet drivers
 CONFIG_DRIVER_WIRED=y
 
+# Driver interface for MACsec capable Qualcomm Atheros drivers
+#CONFIG_DRIVER_MACSEC_QCA=y
+
+# Driver interface for Linux MACsec drivers
+#CONFIG_DRIVER_MACSEC_LINUX=y
+
 # Driver interface for the Broadcom RoboSwitch family
 #CONFIG_DRIVER_ROBOSWITCH=y
 
@@ -83,8 +89,8 @@ CONFIG_DRIVER_WIRED=y
 #LIBS += -lsocket -ldlpi -lnsl
 #LIBS_c += -lsocket
 
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
+# MACsec is included)
 CONFIG_IEEE8021X_EAPOL=y
 
 # EAP-MD5
@@ -166,6 +172,9 @@ CONFIG_WPS=y
 # EAP-EKE
 #CONFIG_EAP_EKE=y
 
+# MACsec
+#CONFIG_MACSEC=y
+
 # PKCS#12 (PFX) support (used to read private key and certificate file from
 # a file that usually has extension .p12 or .pfx)
 CONFIG_PKCS12=y
@@ -288,9 +297,6 @@ CONFIG_BACKEND=file
 # bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
 #CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
 
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
 # IEEE 802.11w (management frame protection), also known as PMF
 # Driver support is also needed for IEEE 802.11w.
 CONFIG_IEEE80211W=y
@@ -378,10 +384,6 @@ CONFIG_INTERNAL_LIBTOMMATH_FAST=y
 # IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
 #CONFIG_IEEE80211R=y
 
-# IEEE Std 802.11r-2008 (Fast BSS Transition) for AP mode (implies
-# CONFIG_IEEE80211R).
-#CONFIG_IEEE80211R_AP=y
-
 # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
 #CONFIG_DEBUG_FILE=y