remove AR71XX_EARLY_SERIAL stuff

SVN-Revision: 17400

target/linux/ar71xx/config-2.6.28

@@ -5,7 +5,6 @@ CONFIG_ADM6996_PHY=y
 CONFIG_AG71XX=y
 CONFIG_AG71XX_AR8216_SUPPORT=y
 # CONFIG_AG71XX_DEBUG is not set
-# CONFIG_AR71XX_EARLY_SERIAL is not set
 CONFIG_AR71XX_MACH_AP81=y
 CONFIG_AR71XX_MACH_AP83=y
 CONFIG_AR71XX_MACH_AW_NR580=y

target/linux/ar71xx/config-2.6.30

@@ -4,7 +4,6 @@ CONFIG_ADM6996_PHY=y
 CONFIG_AG71XX=y
 CONFIG_AG71XX_AR8216_SUPPORT=y
 # CONFIG_AG71XX_DEBUG is not set
-# CONFIG_AR71XX_EARLY_SERIAL is not set
 CONFIG_AR71XX_MACH_AP81=y
 CONFIG_AR71XX_MACH_AP83=y
 CONFIG_AR71XX_MACH_AW_NR580=y

target/linux/ar71xx/config-2.6.31

@@ -6,7 +6,6 @@ CONFIG_AG71XX_AR8216_SUPPORT=y
 # CONFIG_AG71XX_DEBUG is not set
 # CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 # CONFIG_AR7 is not set
-# CONFIG_AR71XX_EARLY_SERIAL is not set
 CONFIG_AR71XX_MACH_AP81=y
 CONFIG_AR71XX_MACH_AP83=y
 CONFIG_AR71XX_MACH_AW_NR580=y

target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig

@@ -1,9 +1,5 @@
 if ATHEROS_AR71XX
 
-config AR71XX_EARLY_SERIAL
-	bool "Use early serial console"
-	default n
-
 menu "Atheros AR71xx machine selection"
 
 config AR71XX_MACH_AP81

target/linux/ar71xx/files/arch/mips/ar71xx/devices.c

@@ -140,7 +140,6 @@ void __init ar71xx_add_device_usb(void)
 	}
 }
 
-#ifndef CONFIG_AR71XX_EARLY_SERIAL
 static struct resource ar71xx_uart_resources[] = {
 	{
 		.start	= AR71XX_UART_BASE,
@@ -177,7 +176,6 @@ void __init ar71xx_add_device_uart(void)
 	ar71xx_uart_data[0].uartclk = ar71xx_ahb_freq;
 	platform_device_register(&ar71xx_uart_device);
 }
-#endif /* CONFIG_AR71XX_EARLY_SERIAL */
 
 static struct resource ar71xx_mdio_resources[] = {
 	{

target/linux/ar71xx/files/arch/mips/ar71xx/devices.h

@@ -50,12 +50,7 @@ void ar71xx_add_device_gpio_buttons(int id,
 				    struct gpio_button *buttons) __init;
 
 void ar71xx_add_device_usb(void) __init;
-
-#ifdef CONFIG_AR71XX_EARLY_SERIAL
-static inline void ar71xx_add_device_uart(void) {}
-#else
 void ar71xx_add_device_uart(void) __init;
-#endif
 
 void ar71xx_add_device_wdt(void) __init;
 

target/linux/ar71xx/files/arch/mips/ar71xx/setup.c

@@ -226,26 +226,6 @@ static void __init detect_sys_frequency(void)
 	}
 }
 
-#ifdef CONFIG_AR71XX_EARLY_SERIAL
-static void __init ar71xx_early_serial_setup(void)
-{
-	struct uart_port p;
-
-	memset(&p, 0, sizeof(p));
-
-	p.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP;
-	p.iotype	= UPIO_MEM32;
-	p.uartclk	= ar71xx_ahb_freq;
-	p.irq		= AR71XX_MISC_IRQ_UART;
-	p.regshift	= 2;
-	p.mapbase	= AR71XX_UART_BASE;
-
-	early_serial_setup(&p);
-}
-#else
-static inline void ar71xx_early_serial_setup(void) {};
-#endif /* CONFIG_AR71XX_EARLY_SERIAL */
-
 const char *get_system_type(void)
 {
 	return ar71xx_sys_type;
@@ -288,8 +268,6 @@ void __init plat_mem_setup(void)
 	_machine_restart = ar71xx_restart;
 	_machine_halt = ar71xx_halt;
 	pm_power_off = ar71xx_halt;
-
-	ar71xx_early_serial_setup();
 }
 
 void __init plat_time_init(void)