mvebu: base-files: autodetect upgrade device

Since some boards could be also booted from other mediums than SD card,
lets make the upgrade block device autodetected.

Signed-off-by: Tomasz Maciej Nowak <[email protected]>

target/linux/mvebu/base-files/lib/preinit/79_move_config

@@ -1,12 +1,13 @@
 #!/bin/sh
 # Copyright (C) 2015 OpenWrt.org
 
-BOOTPART=/dev/mmcblk0p1
-
 . /lib/functions.sh
+. /lib/upgrade/common.sh
 
 move_config() {
-	if [ -b $BOOTPART ]; then
+	local partdev
+
+	if export_bootdevice && export_partdevice partdev 1; then
 		case $(board_name) in
 			turris-omnia)
 			insmod nls_cp437
@@ -16,7 +17,7 @@ move_config() {
 			;;
 		esac
 		mkdir -p /boot
-		mount -o rw,noatime $BOOTPART /boot
+		mount -o rw,noatime "/dev/$partdev" /boot
 		[ -f /boot/sysupgrade.tgz ] && mv -f /boot/sysupgrade.tgz /
 		umount /boot
 	fi

target/linux/mvebu/base-files/lib/upgrade/sdcard.sh

@@ -19,9 +19,12 @@ platform_check_image_sdcard() {
 
 platform_do_upgrade_sdcard() {
 	local board=$(board_name)
+	local diskdev
 
 	sync
-	get_image "$1" | dd of=/dev/mmcblk0 bs=2M conv=fsync
+	if export_bootdevice && export_partdevice diskdev 0; then
+		get_image "$1" | dd of=/dev/$diskdev bs=2M conv=fsync
+	fi
 
 	case "$board" in
 	armada-385-turris-omnia)
@@ -36,9 +39,13 @@ platform_do_upgrade_sdcard() {
 }
 
 platform_copy_config_sdcard() {
-	mkdir -p /boot
-	[ -f /boot/kernel.img ] || mount -o rw,noatime /dev/mmcblk0p1 /boot
-	cp -af "$CONF_TAR" /boot/
-	sync
-	umount /boot
+	local partdev
+
+	if export_partdevice partdev 1; then
+		mkdir -p /boot
+		[ -f /boot/kernel.img ] || mount -o rw,noatime /dev/$partdev /boot
+		cp -af "$CONF_TAR" /boot/
+		sync
+		umount /boot
+	fi
 }