ramips: fix indentation and other mistakes in .dts{, i} files

The following patch fixes:
 * wrong indentations
 * doubled gpio-keys-polled nodes (DIR-300-B7, DIR-320-B1, DIR-610-A1)
 * duplicate spacings
 * empty lines at end of files and after last child nodes
 * trailing and leading whitespace
 * unnecessary and commented-out code
 * missing empty lines between nodes and between properties and nodes
 * unnecessary empty lines between nodes properties [1]

in .dts{,i} files, for ramips target.

[1] Some of empty lines in SOCs dtsi files were left untouched, because they seem to be there for a reason (readability?).

Signed-off-by: Piotr Dymacz <[email protected]>

SVN-Revision: 46613

target/linux/ramips/dts/3G-6200N.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -68,14 +67,17 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "edimax:green:power";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wlan {
 			label = "edimax:amber:wlan";
 			gpios = <&gpio0 14 1>;
 		};
+
 		3g {
 			label = "edimax:blue:3g";
 			gpios = <&gpio0 7 1>;
@@ -87,11 +89,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 12 1>;
 			linux,code = <0x211>;
 		};
+
 		wlanswitch {
 			label = "wlanswitch";
 			gpios = <&gpio0 13 1>;

target/linux/ramips/dts/3G-6200NL.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -68,6 +67,7 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		wlan {
 			label = "edimax:amber:wlan";
 			gpios = <&gpio0 14 1>;
@@ -79,6 +79,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 12 1>;

target/linux/ramips/dts/3G150B.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -41,6 +42,7 @@
 				};
 			};
 		};
+
 		gpio1: gpio@660 {
 			status = "okay";
 		};
@@ -78,10 +80,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		ap {
 			label = "tenda:blue:ap";
 			gpios = <&gpio0 7 1>;
 		};
+
 		3g {
 			label = "tenda:blue:3g";
 			gpios = <&gpio0 14 1>;
@@ -93,6 +97,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 0 1>;
@@ -110,5 +115,4 @@
 			gpios = <&gpio0 13 0>;
 		};
 	};
-
 };

target/linux/ramips/dts/3G300M.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -54,26 +55,32 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		3grouter {
 			label = "tenda:blue:3grouter";
 			gpios = <&gpio0 11 1>;
 		};
+
 		ap {
 			label = "tenda:blue:ap";
 			gpios = <&gpio0 12 1>;
 		};
+
 		wisprouter {
 			label = "tenda:blue:wisprouter";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wirelessrouter {
 			label = "tenda:blue:wirelessrouter";
 			gpios = <&gpio0 13 1>;
 		};
+
 		3g {
 			label = "tenda:blue:3g";
 			gpios = <&gpio0 7 1>;
 		};
+
 		wpsreset {
 			label = "tenda:blue:wpsreset";
 			gpios = <&gpio0 14 1>;
@@ -85,11 +92,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x198>;
 		};
+
 		mode {
 			label = "mode";
 			gpios = <&gpio0 10 1>;

target/linux/ramips/dts/A5-V11.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -41,6 +42,7 @@
 				};
 			};
 		};
+
 		gpio1: gpio@660 {
 			status = "okay";
 		};
@@ -77,10 +79,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		system {
 			label = "a5-v11:blue:system";
 			gpios = <&gpio0 20 1>;
 		};
+
 		power {
 			label = "a5-v11:red:power";
 			gpios = <&gpio0 17 1>;
@@ -92,6 +96,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 0 1>;
@@ -108,6 +113,7 @@
 			gpio-export,output = <1>;
 			gpios = <&gpio0 7 0>;
 		};
+
 		root_hub {
 			gpio-export,name = "root_hub";
 			gpio-export,output = <1>;

target/linux/ramips/dts/AIBR100.dts

@@ -82,10 +82,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		wan {
 			label = "aigale:blue:wan";
 			gpios = <&gpio2 4 1>;
 		};
+
 		wlan {
 			label = "aigale:blue:wlan";
 			gpios = <&gpio3 0 1>;
@@ -97,6 +99,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 12 1>;

target/linux/ramips/dts/AIR3GII.dts

@@ -13,6 +13,7 @@
 
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -70,10 +71,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		wlan {
 			label = "airlive:green:wlan";
 			gpios = <&gpio0 8 0>;
 		};
+
 		mobile {
 			label = "airlive:green:mobile";
 			gpios = <&gpio0 9 1>;
@@ -85,6 +88,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 7 1>;

target/linux/ramips/dts/ALL0239-3G.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -63,18 +62,22 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		usb {
 			label = "hw550-3g:green:usb";
 			gpios = <&gpio0 8 1>;
 		};
+
 		3g {
 			label = "hw550-3g:green:3g";
 			gpios = <&gpio0 11 1>;
 		};
+
 		status {
 			label = "hw550-3g:green:status";
 			gpios = <&gpio0 12 1>;
 		};
+
 		wps {
 			label = "hw550-3g:green:wps";
 			gpios = <&gpio0 14 1>;
@@ -86,16 +89,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		connect {
 			label = "connect";
 			gpios = <&gpio0 7 1>;
 			linux,code = <0xda>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/ALL0256N-4M.dts

@@ -13,6 +13,7 @@
 
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -70,14 +71,17 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		rssilow {
 			label = "all0256n:green:rssilow";
 			gpios = <&gpio0 14 1>;
 		};
+
 		rssimed {
 			label = "all0256n:green:rssimed";
 			gpios = <&gpio0 12 1>;
 		};
+
 		rssihigh {
 			label = "all0256n:green:rssihigh";
 			gpios = <&gpio0 13 1>;
@@ -89,6 +93,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/ALL0256N-8M.dts

@@ -13,6 +13,7 @@
 
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -70,14 +71,17 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		rssilow {
 			label = "all0256n:green:rssilow";
 			gpios = <&gpio0 14 1>;
 		};
+
 		rssimed {
 			label = "all0256n:green:rssimed";
 			gpios = <&gpio0 12 1>;
 		};
+
 		rssihigh {
 			label = "all0256n:green:rssihigh";
 			gpios = <&gpio0 13 1>;
@@ -89,6 +93,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/ALL5002.dts

@@ -13,6 +13,7 @@
 
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -78,7 +79,6 @@
 
 	i2c-gpio {
 		compatible = "i2c-gpio";
-
 		gpios = <&gpio0 1 0 &gpio0 2 0>;
 		i2c-gpio,delay-us = <10>;
 
@@ -97,10 +97,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		ld1 {
 			label = "allnet:green:ld1";
 			gpios = <&pcf0 0 1>;
 		};
+
 		ld2 {
 			label = "allnet:green:ld2";
 			gpios = <&pcf0 1 1>;

target/linux/ramips/dts/ALL5003.dts

@@ -13,6 +13,7 @@
 
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -78,7 +79,6 @@
 
 	i2c-gpio {
 		compatible = "i2c-gpio";
-
 		gpios = <&gpio0 1 0 &gpio0 2 0>;
 		i2c-gpio,delay-us = <10>;
 
@@ -97,10 +97,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		ld1 {
 			label = "allnet:green:ld1";
 			gpios = <&pcf0 0 1>;
 		};
+
 		ld2 {
 			label = "allnet:green:ld2";
 			gpios = <&pcf0 1 1>;

target/linux/ramips/dts/AR670W.dts

@@ -32,6 +32,7 @@
 
 		mdio-bus {
 			status = "okay";
+
 			phy0: ethernet-phy@0 {
 				phy-mode = "mii";
 				reg = <0>;
@@ -47,7 +48,6 @@
 	cfi@bdc00000 {
 		compatible = "cfi-flash";
 		reg = <0xbc400000 0x800000>;
-
 		bank-width = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -89,11 +89,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <100>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x211>;
 		};
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 9 1>;

target/linux/ramips/dts/AR725W.dts

@@ -32,6 +32,7 @@
 
 		mdio-bus {
 			status = "okay";
+
 			phy0: ethernet-phy@0 {
 				phy-mode = "mii";
 				reg = <0>;
@@ -47,7 +48,6 @@
 	cfi@bdc00000 {
 		compatible = "cfi-flash";
 		reg = <0xbc400000 0x800000>;
-
 		bank-width = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -99,11 +99,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <100>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x211>;
 		};
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 9 1>;

target/linux/ramips/dts/ARGUS_ATP52B.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -48,10 +47,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		run {
 			label = "argus-atp52b:green:run";
 			gpios = <&gpio0 9 1>;
 		};
+
 		net {
 			label = "argus-atp52b:amber:net";
 			gpios = <&gpio0 13 1>;
@@ -63,11 +64,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x211>;
 		};
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;

target/linux/ramips/dts/ASL26555-16M.dts

@@ -13,6 +13,7 @@
 
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -26,30 +27,36 @@
 					reg = <0x0 0x30000>;
 					read-only;
 				};
+
 				partition@30000 {
 					label = "uboot-env";
 					reg = <0x30000 0x10000>;
 					read-only;
 				};
+
 				partition@40000 {
 					label = "factory";
 					reg = <0x40000 0x10000>;
 					read-only;
 				};
+
 				partition@50000 {
 					label = "firmware";
 					reg = <0x50000 0xf80000>;
 				};
+
 				partition@fd0000 {
 					label = "cert";
 					reg = <0xfd0000 0x10000>;
 					read-only;
 				};
+
 				partition@fe0000 {
 					label = "langpack";
 					reg = <0xfe0000 0x10000>;
 					read-only;
 				};
+
 				devdata: partition@ff0000 {
 					label = "devdata";
 					reg = <0xff0000 0x10000>;
@@ -89,11 +96,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 0>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 12 0>;
@@ -103,34 +112,42 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		eth {
 			label = "asl26555:green:eth";
 			gpios = <&gpio0 0 1>;
 		};
+
 		wan-red {
 			label = "asl26555:red:wan";
 			gpios = <&gpio0 1 0>;
 		};
+
 		wan-green {
 			label = "asl26555:green:wan";
 			gpios = <&gpio0 2 0>;
 		};
+
 		wlan {
 			label = "asl26555:green:wlan";
 			gpios = <&gpio0 7 0>;
 		};
+
 		power-green {
 			label = "asl26555:green:power";
 			gpios = <&gpio0 8 0>;
 		};
+
 		power-red {
 			label = "asl26555:red:power";
 			gpios = <&gpio0 9 0>;
 		};
+
 		3g-green {
 			label = "asl26555:green:3g";
 			gpios = <&gpio0 14 1>;
 		};
+
 		3g-red {
 			label = "asl26555:red:3g";
 			gpios = <&gpio0 17 1>;

target/linux/ramips/dts/ASL26555-8M.dts

@@ -13,6 +13,7 @@
 
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -26,25 +27,30 @@
 					reg = <0x0 0x30000>;
 					read-only;
 				};
+
 				ubootenv: partition@30000 {
 					label = "uboot-env";
 					reg = <0x30000 0x10000>;
 					read-only;
 				};
+
 				partition@40000 {
 					label = "rgdb";
 					reg = <0x40000 0x10000>;
 					read-only;
 				};
+
 				partition@50000 {
 					label = "firmware";
 					reg = <0x50000 0x790000>;
 				};
+
 				partition@7e0000 {
 					label = "cert";
 					reg = <0x7e0000 0x10000>;
 					read-only;
 				};
+
 				partition@7f0000 {
 					label = "langpack";
 					reg = <0x7f0000 0x10000>;
@@ -84,11 +90,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 0>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 12 0>;
@@ -98,34 +106,42 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		eth {
 			label = "asl26555:green:eth";
 			gpios = <&gpio0 0 1>;
 		};
+
 		wan-red {
 			label = "asl26555:red:wan";
 			gpios = <&gpio0 1 0>;
 		};
+
 		wan-green {
 			label = "asl26555:green:wan";
 			gpios = <&gpio0 2 0>;
 		};
+
 		wlan {
 			label = "asl26555:green:wlan";
 			gpios = <&gpio0 7 0>;
 		};
+
 		power-green {
 			label = "asl26555:green:power";
 			gpios = <&gpio0 8 0>;
 		};
+
 		power-red {
 			label = "asl26555:red:power";
 			gpios = <&gpio0 9 0>;
 		};
+
 		3g-green {
 			label = "asl26555:green:3g";
 			gpios = <&gpio0 14 1>;
 		};
+
 		3g-red {
 			label = "asl26555:red:3g";
 			gpios = <&gpio0 17 1>;

target/linux/ramips/dts/AWAPN2403.dts

@@ -4,11 +4,12 @@
 
 / {
 	compatible = "AWAPN2403", "ralink,rt3052-soc";
-	model =  "AsiaRF AWAPN2403";
+	model = "AsiaRF AWAPN2403";
 
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -62,6 +63,7 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		link {
 			label = "asiarf:green:wps";
 			gpios = <&gpio0 14 1>;
@@ -73,6 +75,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/AWM002-EVB-4M.dts

@@ -15,14 +15,17 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		tx {
 			label = "awm002-evb:green:tx";
 			gpios = <&gpio0 15 1>;
 		};
+
 		rx {
 			label = "awm002-evb:green:rx";
 			gpios = <&gpio0 16 1>;
 		};
+
 		wps {
 			label = "awm002-evb:green:wps";
 			gpios = <&gpio0 21 1>;
@@ -34,11 +37,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset_wps {
 			label = "reset_wps";
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x198>;
 		};
+
 		mode {
 			label = "mode";
 			gpios = <&gpio0 20 1>;

target/linux/ramips/dts/AWM002-EVB-8M.dts

@@ -15,14 +15,17 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		tx {
 			label = "awm002-evb:green:tx";
 			gpios = <&gpio0 15 1>;
 		};
+
 		rx {
 			label = "awm002-evb:green:rx";
 			gpios = <&gpio0 16 1>;
 		};
+
 		wps {
 			label = "awm002-evb:green:wps";
 			gpios = <&gpio0 21 1>;
@@ -34,11 +37,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset_wps {
 			label = "reset_wps";
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x198>;
 		};
+
 		mode {
 			label = "mode";
 			gpios = <&gpio0 20 1>;

target/linux/ramips/dts/AWM002.dtsi

@@ -7,6 +7,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -62,10 +63,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		ld1 {
 			label = "asiarf:green:ld1";
 			gpios = <&gpio0 0 1>;
 		};
+
 		ld2 {
 			label = "asiarf:green:ld2";
 			gpios = <&gpio0 1 1>;

target/linux/ramips/dts/AWM003-EVB.dts

@@ -30,14 +30,17 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		tx {
 			label = "awm002-evb:green:tx";
 			gpios = <&gpio0 15 1>;
 		};
+
 		rx {
 			label = "awm002-evb:green:rx";
 			gpios = <&gpio0 16 1>;
 		};
+
 		wps {
 			label = "awm002-evb:green:wps";
 			gpios = <&gpio0 21 1>;
@@ -49,11 +52,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset_wps {
 			label = "reset_wps";
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x198>;
 		};
+
 		mode {
 			label = "mode";
 			gpios = <&gpio0 20 1>;

target/linux/ramips/dts/ArcherC20i.dts

@@ -72,7 +72,6 @@
 	ethernet@10100000 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ephy_pins>;
-
 		mtd-mac-address = <&rom 0xf100>;
 		ralink,port-map = "wllll";
 	};

target/linux/ramips/dts/BC2.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -50,6 +49,7 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		usb {
 			label = "bc2:blue:usb";
 			gpios = <&gpio0 20 1>;
@@ -61,6 +61,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 17 1>;

target/linux/ramips/dts/BR-6425.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -39,10 +38,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "edimax:green:power";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wlan {
 			label = "edimax:orange:wlan";
 			gpios = <&gpio0 14 1>;
@@ -54,11 +55,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset_wps {
 			label = "reset_wps";
 			gpios = <&gpio0 12 1>;
 			linux,code = <0x198>;
 		};
+
 		rfkill {
 			label = "RFKILL switch";
 			gpios = <&gpio0 13 1>;

target/linux/ramips/dts/BR-6475ND.dts

@@ -45,9 +45,9 @@
 
 	pci@10140000 {
 		status = "okay";
-
 		pinctrl-names = "default";
 		pinctrl-0 = <&pci_pins>;
+
 		pci_pins: pci {
 			pci {
 				ralink,group = "pci";
@@ -58,6 +58,7 @@
 		host-bridge {
 			pci-bridge@1 {
 				status = "okay";
+
 				wmac@0,0 {
 					ralink,5ghz = <0>;
 					compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
@@ -79,7 +80,6 @@
 	nor-flash@1c000000 {
 		compatible = "cfi-flash";
 		reg = <0x1c000000 0x800000>;
-
 		bank-width = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -131,11 +131,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <100>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 7 1>;
 			linux,code = <0x198>;
 		};
+
 		rfkill {
 			label = "rfkill";
 			gpios = <&gpio0 9 1>;
@@ -151,10 +153,12 @@
 			label = "edimax:green:power";
 			gpios = <&gpio0 10 1>;
 		};
+
 		wlan {
 			label = "edimax:amber:wlan";
 			gpios = <&gpio0 11 1>;
 		};
+
 		wlan_5ghz {
 			label = "edimax:amber:wlan_5ghz";
 			gpios = <&gpio0 14 1>;
@@ -168,6 +172,7 @@
 	gpio_export {
 		compatible = "gpio-export";
 		#size-cells = <0>;
+
 		usb {
 			gpio-export,name="usb";
 			gpio-export,output=<0>;

target/linux/ramips/dts/BROADWAY.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -62,10 +61,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		diskmounted {
 			label = "red:diskmounted";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wps_active {
 			label = "red:wps_active";
 			gpios = <&gpio0 14 1>;
@@ -77,6 +78,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		factory {
 			label = "Factory Reset button";
 			gpios = <&gpio0 13 1>;

target/linux/ramips/dts/CARAMBOLA.dts

@@ -22,7 +22,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -70,7 +69,6 @@
 
 	i2c-gpio {
 		compatible = "i2c-gpio";
-
 		gpios = <&gpio0 1 0 &gpio0 2 0>;
 		i2c-gpio,delay-us = <10>;
 	};

target/linux/ramips/dts/CF-WR800N.dts

@@ -8,7 +8,7 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200";
-        };
+	};
 
 	palmbus@10000000 {
 		gpio0: gpio@600 {
@@ -100,15 +100,16 @@
 		};
 	};
 
-        gpio-keys-polled {
-                compatible = "gpio-keys-polled";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                poll-interval = <20>;
-                reset {
-                        label = "reset";
-                        gpios = <&gpio0 2 1>;
-                        linux,code = <0x198>;
-                };
-        };
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 2 1>;
+			linux,code = <0x198>;
+		};
+	};
 };

target/linux/ramips/dts/CY-SWR1100.dts

@@ -30,9 +30,9 @@
 
 	pci@10140000 {
 		status = "okay";
-
 		pinctrl-names = "default";
 		pinctrl-0 = <&pci_pins>;
+
 		pci_pins: pci {
 			pci {
 				ralink,group = "pci";
@@ -43,6 +43,7 @@
 		host-bridge {
 			pci-bridge@1 {
 				status = "okay";
+
 				wmac@0,0 {
 					ralink,5ghz = <0>;
 					compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
@@ -70,7 +71,6 @@
 	nor-flash@1c000000 {
 		compatible = "cfi-flash";
 		reg = <0x1c000000 0x800000>;
-
 		bank-width = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -80,25 +80,30 @@
 			reg = <0x0 0x30000>;
 			read-only;
 		};
+
 		partition@30000 {
 			label = "uboot-env";
 			reg = <0x30000 0x4000>;
 			read-only;
 		};
+
 		factory: partition@34000 {
 			label = "factory";
 			reg = <0x34000 0x4000>;
 			read-only;
 		};
+
 		partition@38000 {
 			label = "nvram";
 			reg = <0x38000 0x8000>;
 			read-only;
 		};
+
 		partition@40000 {
 			label = "devdata";
 			reg = <0x40000 0x10000>;
 		};
+
 		partition@50000 {
 			label = "firmware";
 			reg = <0x50000 0x7b0000>;
@@ -117,11 +122,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <100>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 6 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 3 1>;
@@ -131,10 +138,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		wps {
 			label = "samsung:blue:wps";
 			gpios = <&gpio0 0 1>;
 		};
+
 		usb {
 			label = "samsung:blue:usb";
 			gpios = <&gpio1 1 1>;

target/linux/ramips/dts/D105.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -50,10 +49,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "d105:red:power";
 			gpios = <&gpio0 0 1>;
 		};
+
 		wps {
 			label = "d105:green:usb";
 			gpios = <&gpio0 13 1>;
@@ -65,6 +66,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;

target/linux/ramips/dts/DAP-1350.dts

@@ -22,7 +22,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -72,14 +71,17 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "d-link:blue:power";
 			gpios = <&gpio0 8 1>;
 		};
+
 		power2 {
 			label = "d-link:red:power";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wps {
 			label = "d-link:blue:wps";
 			gpios = <&gpio0 14 1>;
@@ -91,21 +93,25 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x211>;
 		};
+
 		rt {
 			label = "rt";
 			gpios = <&gpio0 11 1>;
 			linux,code = <0x100>;
 		};
+
 		ap {
 			label = "ap";
 			gpios = <&gpio0 7 1>;

target/linux/ramips/dts/DCS-930.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x400000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -60,14 +59,17 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		wifi {
 			label = "d-link:red:alert";
 			gpios = <&gpio0 8 1>;
 		};
+
 		power {
 			label = "d-link:green:status";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wps {
 			label = "d-link:blue:wps";
 			gpios = <&gpio0 13 1>;
@@ -85,6 +87,7 @@
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x101>;
 		};
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;

target/linux/ramips/dts/DCS-930L-B1.dts

@@ -3,12 +3,13 @@
 /include/ "rt5350.dtsi"
 
 / {
-	compatible =  "DCS-930L-B1", "ralink,rt5350-soc";
+	compatible = "DCS-930L-B1", "ralink,rt5350-soc";
 	model = "D-Link DCS-930L B1";
 
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -74,10 +75,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "d-link:red:power";
 			gpios = <&gpio0 17 1>;
 		};
+
 		wps {
 			label = "d-link:blue:wps";
 			gpios = <&gpio0 19 1>;
@@ -89,11 +92,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 20 1>;

target/linux/ramips/dts/DIR-300-B1.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -65,11 +64,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
@@ -79,22 +80,27 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		status {
 			label = "d-link:amber:status";
 			gpios = <&gpio0 8 1>;
 		};
+
 		status2 {
 			label = "d-link:green:status";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wan {
 			label = "d-link:amber:wan";
 			gpios = <&gpio0 14 1>;
 		};
+
 		wan2 {
 			label = "d-link:green:wan";
 			gpios = <&gpio0 12 1>;
 		};
+
 		wps {
 			label = "d-link:blue:wps";
 			gpios = <&gpio0 13 1>;

target/linux/ramips/dts/DIR-300-B7.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -56,41 +57,43 @@
 		mtd-mac-address = <&factory 0x4>;
 	};
 
-        esw@10110000 {
-                ralink,portmap = <0x2f>;
-                ralink,led_polarity = <0x17>;
-        };
-
-        gpio-leds {
-                compatible = "gpio-leds";
-                status {
-                        label = "d-link:green:status";
-                        gpios = <&gpio0 9 1>;
-                };
-                wps {
-                        label = "d-link:blue:wps";
-                        gpios = <&gpio0 13 1>;
-                };
-        };
-
-        gpio-keys-polled {
-                gpio-keys-polled {
-                compatible = "gpio-keys-polled";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                poll-interval = <20>;
-                        reset {
-                                label = "reset";
-                                gpios = <&gpio0 10 1>;
-                                linux,code = <0x198>;
-                        };
-                        wps {
-                                label = "wps";
-                                gpios = <&gpio0 0 1>;
-                                linux,code = <0x211>;
-                        };
-                };
-        };
+	esw@10110000 {
+		ralink,portmap = <0x2f>;
+		ralink,led_polarity = <0x17>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "d-link:green:status";
+			gpios = <&gpio0 9 1>;
+		};
+
+		wps {
+			label = "d-link:blue:wps";
+			gpios = <&gpio0 13 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0x198>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x211>;
+		};
+	};
 
 	wmac@10180000 {
 		status = "okay";
@@ -98,4 +101,3 @@
 		ralink,mtd-eeprom = <&factory 0>;
 	};
 };
-

target/linux/ramips/dts/DIR-320-B1.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -67,14 +68,17 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		status {
 			label = "d-link:green:status";
 			gpios = <&gpio0 9 1>;
 		};
+
 		usb {
 			label = "d-link:green:usb";
 			gpios = <&gpio0 14 1>;
 		};
+
 		wps {
 			label = "d-link:green:wps";
 			gpios = <&gpio0 13 1>;
@@ -82,21 +86,21 @@
 	};
 
 	gpio-keys-polled {
-		gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
-			reset {
-				label = "reset";
-				gpios = <&gpio0 10 1>;
-				linux,code = <0x198>;
-			};
-			wps {
-				label = "wps";
-				gpios = <&gpio0 0 1>;
-				linux,code = <0x211>;
-			};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0x198>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x211>;
 		};
 	};
 

target/linux/ramips/dts/DIR-600-B1.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -65,11 +64,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
@@ -79,22 +80,27 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		status {
 			label = "d-link:amber:status";
 			gpios = <&gpio0 8 1>;
 		};
+
 		status2 {
 			label = "d-link:green:status";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wan {
 			label = "d-link:amber:wan";
 			gpios = <&gpio0 14 1>;
 		};
+
 		wan2 {
 			label = "d-link:green:wan";
 			gpios = <&gpio0 12 1>;
 		};
+
 		wps {
 			label = "d-link:blue:wps";
 			gpios = <&gpio0 13 1>;

target/linux/ramips/dts/DIR-600-B2.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -61,11 +60,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
@@ -75,22 +76,27 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		status {
 			label = "d-link:amber:status";
 			gpios = <&gpio0 8 1>;
 		};
+
 		status2 {
 			label = "d-link:green:status";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wan {
 			label = "d-link:amber:wan";
 			gpios = <&gpio0 14 1>;
 		};
+
 		wan2 {
 			label = "d-link:green:wan";
 			gpios = <&gpio0 12 1>;
 		};
+
 		wps {
 			label = "d-link:blue:wps";
 			gpios = <&gpio0 13 1>;

target/linux/ramips/dts/DIR-610-A1.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -70,10 +71,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		status {
 			label = "d-link:green:status";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wps {
 			label = "d-link:green:wps";
 			gpios = <&gpio0 13 1>;
@@ -81,21 +84,21 @@
 	};
 
 	gpio-keys-polled {
-		gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
-			reset {
-				label = "reset";
-				gpios = <&gpio0 10 1>;
-				linux,code = <0x198>;
-			};
-			wps {
-				label = "wps";
-				gpios = <&gpio0 0 1>;
-				linux,code = <0x211>;
-			};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0x198>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x211>;
 		};
 	};
 };

target/linux/ramips/dts/DIR-615-D.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -61,11 +60,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
@@ -75,22 +76,27 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		status {
 			label = "d-link:amber:status";
 			gpios = <&gpio0 8 1>;
 		};
+
 		status2 {
 			label = "d-link:green:status";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wan {
 			label = "d-link:amber:wan";
 			gpios = <&gpio0 14 1>;
 		};
+
 		wan2 {
 			label = "d-link:green:wan";
 			gpios = <&gpio0 12 1>;
 		};
+
 		wps {
 			label = "d-link:blue:wps";
 			gpios = <&gpio0 13 1>;

target/linux/ramips/dts/DIR-615-H1.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -49,10 +50,12 @@
 				ralink,group = "i2c", "jtag", "uartf";
 				ralink,function = "gpio";
 			};
+
 			rgmii {
 				ralink,group = "rgmii";
 				ralink,function = "rgmii";
 			};
+
 			mdio {
 				ralink,group = "mdio";
 				ralink,function = "mdio";
@@ -74,22 +77,27 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		status {
 			label = "d-link:amber:status";
 			gpios = <&gpio0 7 0>;
 		};
+
 		status2 {
 			label = "d-link:green:status";
 			gpios = <&gpio0 9 0>;
 		};
+
 		wan {
 			label = "d-link:amber:wan";
 			gpios = <&gpio0 12 1>;
 		};
+
 		wan2 {
 			label = "d-link:green:wan";
 			gpios = <&gpio0 13 1>;
 		};
+
 		wps {
 			label = "d-link:blue:wps";
 			gpios = <&gpio0 14 1>;
@@ -101,11 +109,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/DIR-620-A1.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -65,11 +64,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
@@ -79,26 +80,32 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		status {
 			label = "d-link:amber:status";
 			gpios = <&gpio0 8 1>;
 		};
+
 		status2 {
 			label = "d-link:green:status";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wan {
 			label = "d-link:amber:wan";
 			gpios = <&gpio0 14 1>;
 		};
+
 		wan2 {
 			label = "d-link:green:wan";
 			gpios = <&gpio0 12 1>;
 		};
+
 		wps {
 			label = "d-link:blue:wps";
 			gpios = <&gpio0 13 0>;
 		};
+
 		wps2 {
 			label = "d-link:amber:wps";
 			gpios = <&gpio0 11 0>;

target/linux/ramips/dts/DIR-620-D1.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -49,10 +50,12 @@
 				ralink,group = "i2c", "jtag", "uartf";
 				ralink,function = "gpio";
 			};
+
 			rgmii {
 				ralink,group = "rgmii";
 				ralink,function = "rgmii";
 			};
+
 			mdio {
 				ralink,group = "mdio";
 				ralink,function = "mdio";
@@ -74,10 +77,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		status {
 			label = "d-link:green:status";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wifi {
 			label = "d-link:green:wifi";
 			gpios = <&gpio0 17 1>;
@@ -89,6 +94,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset_wps {
 			label = "reset_wps";
 			gpios = <&gpio0 7 1>;

target/linux/ramips/dts/DIR-645.dts

@@ -21,30 +21,36 @@
 				reg = <0 0>;
 				linux,modalias = "m25p80";
 				spi-max-frequency = <25000000>;
+
 				partition@0 {
 					label = "uboot";
 					reg = <0x0 0x30000>;
 					read-only;
 				};
+
 				partition@30000 {
 					label = "uboot-env";
 					reg = <0x30000 0x4000>;
 					read-only;
 				};
+
 				factory: partition@34000 {
 					label = "factory";
 					reg = <0x34000 0x4000>;
 					read-only;
 				};
+
 				partition@38000 {
 					label = "nvram";
 					reg = <0x38000 0x8000>;
 					read-only;
 				};
+
 				partition@40000 {
 					label = "devdata";
 					reg = <0x40000 0x10000>;
 				};
+
 				partition@50000 {
 					label = "firmware";
 					reg = <0x50000 0x7b0000>;
@@ -64,6 +70,7 @@
 
 	ethernet@10100000 {
 		mtd-mac-address = <&factory 0x4>;
+
 		port@0 {
 			ralink,fixed-link = <1000 1 1 0>;
 		};
@@ -94,11 +101,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <100>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 9 0>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 14 0>;
@@ -113,6 +122,7 @@
 			label = "d-link:green:inet";
 			gpios = <&gpio0 0 1>;
 		};
+
 		wps {
 			label = "d-link:green:wps";
 			gpios = <&gpio1 2 0>;
@@ -122,6 +132,7 @@
 	gpio_export {
 		compatible = "gpio-export";
 		#size-cells = <0>;
+
 		usb {
 			gpio-export,name = "usb";
 			gpio-export,output = <1>;

target/linux/ramips/dts/DIR-810L.dts

@@ -84,7 +84,6 @@
 
 	gsw@10110000 {
 		ralink,port4 = "ephy";
-
 		pinctrl-names = "default";
 		pinctrl-0 = <&ephy_pins>;
 	};
@@ -102,11 +101,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 1 1>;
 			linux,code = <0x100>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 2 1>;
@@ -116,14 +117,17 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "d-link:green:power";
 			gpios = <&gpio0 9 0>;
 		};
+
 		wan {
 			label = "d-link:orange:wan";
 			gpios = <&gpio0 12 0>;
 		};
+
 		status {
 			label = "d-link:orange:power";
 			gpios = <&gpio0 13 0>;

target/linux/ramips/dts/DIR-860L-B1.dts

@@ -76,6 +76,7 @@
 				mediatek,2ghz = <0>;
 			};
 		};
+
 		pcie1 {
 			mt76@1,0 {
 				reg = <0x0000 0 0 0 0>;

target/linux/ramips/dts/E1700.dts

@@ -65,9 +65,7 @@
 
 	ethernet@10100000 {
 		status = "okay";
-
 		mtd-mac-address = <&factory 0x28>;
-
 		pinctrl-names = "default";
 		pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
 
@@ -84,22 +82,27 @@
 				reg = <0>;
 				phy-mode = "rgmii";
 			};
+
 			phy1: ethernet-phy@1 {
 				reg = <1>;
 				phy-mode = "rgmii";
 			};
+
 			phy2: ethernet-phy@2 {
 				reg = <2>;
 				phy-mode = "rgmii";
 			};
+
 			phy3: ethernet-phy@3 {
 				reg = <3>;
 				phy-mode = "rgmii";
 			};
+
 			phy4: ethernet-phy@4 {
 				reg = <4>;
 				phy-mode = "rgmii";
 			};
+
 			phy1f: ethernet-phy@1f {
 				reg = <0x1f>;
 				phy-mode = "rgmii";
@@ -121,11 +124,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 1 0>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 2 0>;
@@ -135,10 +140,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "linksys:green:power";
 			gpios = <&gpio0 10 1>;
 		};
+
 		wan {
 			label = "linksys:green:wps";
 			gpios = <&gpio0 12 1>;

target/linux/ramips/dts/ESR-9753.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -50,10 +49,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "esr-9753:orange:power";
 			gpios = <&gpio0 8 1>;
 		};
+
 		wps {
 			label = "esr-9753:orange:wps";
 			gpios = <&gpio0 14 1>;
@@ -65,11 +66,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/F5D8235_V1.dts

@@ -26,7 +26,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -37,16 +36,19 @@
 			reg = <0x0 0x30000>;
 			read-only;
 		};
+
 		partition@30000 {
 			label = "uboot-env";
 			reg = <0x30000 0x10000>;
 			read-only;
 		};
+
 		factory: partition@40000 {
 			label = "factory";
 			reg = <0x40000 0x10000>;
 			read-only;
 		};
+
 		partition@50000 {
 			label = "linux";
 			reg = <0x50000 0x3b0000>;
@@ -57,7 +59,7 @@
 		status = "okay";
 		mtd-mac-address = <&factory 0x4>;
 
-                port@0 {
+		port@0 {
 			ralink,fixed-link = <1000 1 1 1>;
 		};
 	};
@@ -79,11 +81,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <100>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x211>;
 		};
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 9 1>;
@@ -98,6 +102,7 @@
 			label = "f5d8235-v1:blue:storage";
 			gpios = <&gpio0 7 1>;
 		};
+
 		storage2 {
 			label = "f5d8235-v1:orange:storage";
 			gpios = <&gpio0 8 1>;

target/linux/ramips/dts/F5D8235_V2.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -70,38 +69,47 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		internet {
 			label = "f5d8235v2:blue:internet";
 			gpios = <&gpio0 5 1>;
 		};
+
 		internet2 {
 			label = "f5d8235v2:amber:internet";
 			gpios = <&gpio0 6 1>;
 		};
+
 		modem {
 			label = "f5d8235v2:blue:modem";
 			gpios = <&gpio0 11 1>;
 		};
+
 		modem2 {
 			label = "f5d8235v2:amber:modem";
 			gpios = <&gpio0 8 1>;
 		};
+
 		router {
 			label = "f5d8235v2:blue:router";
 			gpios = <&gpio0 9 1>;
 		};
+
 		storage {
 			label = "f5d8235v2:blue:storage";
 			gpios = <&gpio0 23 1>;
 		};
+
 		storage2 {
 			label = "f5d8235v2:amber:storage";
 			gpios = <&gpio0 22 1>;
 		};
+
 		security {
 			label = "f5d8235v2:blue:security";
 			gpios = <&gpio0 13 1>;
 		};
+
 		security2 {
 			label = "f5d8235v2:amber:security";
 			gpios = <&gpio0 12 1>;

target/linux/ramips/dts/F7C027.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -83,38 +84,46 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		status {
 			label = "belkin:blue:status";
 			gpios = <&gpio0 7 1>;
 		};
+
 		power {
 			label = "belkin:blue:power";
 			gpios = <&gpio0 9 1>;
 		};
+
 		orange {
 			label = "belkin:orange:status";
 			gpios = <&gpio0 11 1>;
 		};
+
 		relay {
 			label = "belkin:device:relay";
 			gpios = <&gpio0 13 0>;
 		};
 	};
+
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		top {
 			label = "top";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		power {
 			label = "power";
 			gpios = <&gpio0 12 1>;
 			linux,code = <0x100>;
 		};
+
 		sensor {
 			label = "sensor";
 			gpios = <&gpio0 14 1>;

target/linux/ramips/dts/FIREWRT.dts

@@ -53,7 +53,6 @@
 					label = "firmware";
 					reg = <0x50000 0xfb0000>;
 				};
-
 			};
 		};
 	};
@@ -98,11 +97,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 18 1>;
 			linux,code = <0x211>;
 		};
+
 		power {
 			label = "power";
 			gpios = <&gpio0 23 1>;
@@ -112,7 +113,7 @@
 
 	pinctrl {
 		state_default: pinctrl0 {
-		gpio {
+			gpio {
 				ralink,group = "wdt", "rgmii2";
 				ralink,function = "gpio";
 			};

target/linux/ramips/dts/FONERA20N.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -50,14 +49,17 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		wifi {
 			label = "fonera20n:orange:wifi";
 			gpios = <&gpio0 7 1>;
 		};
+
 		power {
 			label = "fonera20n:green:power";
 			gpios = <&gpio0 9 1>;
 		};
+
 		usb {
 			label = "fonera20n:orange:usb";
 			gpios = <&gpio0 14 1>;
@@ -69,11 +71,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 12 1>;
 			linux,code = <0x198>;
 		};
+
 		switch {
 			label = "switch";
 			gpios = <&gpio0 13 1>;
@@ -94,21 +98,25 @@
 			swconfig,segment = "lan";
 			swconfig,portmap = <0 4>;
 		};
+
 		port@1 {
 			compatible = "swconfig,port";
 			swconfig,segment = "lan";
 			swconfig,portmap = <1 3>;
 		};
+
 		port@2 {
 			compatible = "swconfig,port";
 			swconfig,segment = "lan";
 			swconfig,portmap = <2 2>;
 		};
+
 		port@3 {
 			compatible = "swconfig,port";
 			swconfig,segment = "lan";
 			swconfig,portmap = <3 1>;
 		};
+
 		port@4 {
 			compatible = "swconfig,port";
 			swconfig,segment = "wan";

target/linux/ramips/dts/FREESTATION5.dts

@@ -22,7 +22,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -70,6 +69,7 @@
 
 	gpio-export {
 		compatible = "gpio-export";
+
 		// Used to enable power-over-ethernet passthrough from port0 to port1.
 		// Disable passthrough by default to prevent accidental equipment damage.
 		poe {
@@ -81,16 +81,19 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		// The following leds are defined in the ArcOS firmware, but reportedly
 		// not present in the Freestation5 device.
 		wifi {
 			label = "freestation:unknown:wifi";
 			gpios = <&gpio0 7 1>;
 		};
+
 		powerg {
 			label = "freestation:unknown:powerg";
 			gpios = <&gpio0 9 1>;
 		};
+
 		usb {
 			label = "freestation:unknown:usb";
 			gpios = <&gpio0 14 1>;

target/linux/ramips/dts/HG255D.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x1000000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -56,26 +55,32 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "hg255d:power";
 			gpios = <&gpio0 8 1>;
 		};
+
 		internet {
 			label = "hg255d:internet";
 			gpios = <&gpio0 13 1>;
 		};
+
 		wifi {
 			label = "hg255d:wlan";
 			gpios = <&gpio0 14 1>;
 		};
+
 		usb {
 			label = "hg255d:usb";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wps {
 			label = "hg255d:wps";
 			gpios = <&gpio0 12 1>;
 		};
+
 		voice {
 			label = "hg255d:voice";
 			gpios = <&gpio0 5 1>;
@@ -87,16 +92,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <10>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 4 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x211>;
 		};
+
 		rfkill {
 			label = "rfkill";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/HLKRM04.dts

@@ -22,6 +22,7 @@
 
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -86,6 +87,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		wps {
 			label = "reset";
 			gpios = <&gpio0 14 1>;
@@ -95,6 +97,7 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "hlk-rm04:red:power";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/HT-TM02.dts

@@ -10,8 +10,10 @@
 		gpio0: gpio@600 {
 			status = "okay";
 		};
+
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -19,21 +21,25 @@
 				reg = <0 0>;
 				linux,modalias = "m25p80", "mx25l6405d";
 				spi-max-frequency = <10000000>;
+
 				partition@0 {
 					label = "u-boot";
 					reg = <0x0 0x30000>;
 					read-only;
 				};
+
 				partition@30000 {
 					label = "u-boot-env";
 					reg = <0x30000 0x10000>;
 					read-only;
 				};
+
 				factory: partition@40000 {
 					label = "factory";
 					reg = <0x40000 0x10000>;
 					read-only;
 				};
+
 				partition@50000 {
 					label = "firmware";
 					reg = <0x50000 0x7b0000>;
@@ -73,15 +79,16 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		wlan {
 			label = "ht-tm02:blue:wlan";
 			gpios = <&gpio0 7 1>;
 		};
+
 		lan {
 			label = "ht-tm02:green:lan";
 			gpios = <&gpio0 12 1>;
 		};
-
 	};
 
 	gpio-keys-polled {
@@ -89,11 +96,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		modeswitch {
 			label = "modeswitch";
 			gpios = <&gpio0 14 1>;

target/linux/ramips/dts/HW550-3G.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -62,18 +61,22 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		usb {
 			label = "hw550-3g:green:usb";
 			gpios = <&gpio0 8 1>;
 		};
+
 		3g {
 			label = "hw550-3g:green:3g";
 			gpios = <&gpio0 11 1>;
 		};
+
 		status {
 			label = "hw550-3g:green:status";
 			gpios = <&gpio0 12 1>;
 		};
+
 		wps {
 			label = "hw550-3g:green:wps";
 			gpios = <&gpio0 14 1>;
@@ -85,16 +88,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		connect {
 			label = "connect";
 			gpios = <&gpio0 7 1>;
 			linux,code = <0xda>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/IP2202.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -58,10 +57,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		run {
 			label = "ip2202:green:run";
 			gpios = <&gpio0 9 1>;
 		};
+
 		net {
 			label = "ip2202:amber:net";
 			gpios = <&gpio0 13 1>;
@@ -73,6 +74,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;

target/linux/ramips/dts/M2M.dts

@@ -13,6 +13,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -58,10 +59,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		wifi {
 			label = "m2m:blue:wifi";
 			gpios = <&gpio0 7 1>;
 		};
+
 		wan {
 			label = "m2m:green:wan";
 			gpios = <&gpio0 12 1>;
@@ -73,11 +76,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		power {
 			label = "power";
 			gpios = <&gpio0 1 1>;
 			linux,code = <0x116>;
 		};
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;

target/linux/ramips/dts/M3.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -63,6 +64,7 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		status {
 			label = "m3:blue:status";
 			gpios = <&gpio0 9 1>;
@@ -74,11 +76,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		mode {
 			label = "mode";
 			gpios = <&gpio0 17 1>;

target/linux/ramips/dts/M4-4M.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -63,6 +64,7 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		status {
 			label = "m4:blue:status";
 			gpios = <&gpio0 9 1>;
@@ -74,6 +76,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;

target/linux/ramips/dts/M4-8M.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -63,6 +64,7 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		status {
 			label = "m4:blue:status";
 			gpios = <&gpio0 9 1>;
@@ -74,6 +76,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;

target/linux/ramips/dts/MLW221.dts

@@ -56,7 +56,6 @@
 				partition@fb0000 {
 					label = "user-config";
 					reg = <0xfb0000 0x50000>;
-
 				};
 			};
 		};
@@ -90,10 +89,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		system {
 			label = "kingston:blue:system";
 			gpios = <&gpio2 3 1>;
 		};
+
 		wifi {
 			label = "kingston:blue:wifi";
 			gpios = <&gpio3 0 1>;
@@ -105,11 +106,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 1 1>;
 			linux,code = <0x198>;
 		};
+
 		system {
 			label = "system";
 			gpios = <&gpio0 2 1>;

target/linux/ramips/dts/MLWG2.dts

@@ -89,10 +89,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		system {
 			label = "kingston:blue:system";
 			gpios = <&gpio2 3 1>;
 		};
+
 		wifi {
 			label = "kingston:blue:wifi";
 			gpios = <&gpio3 0 1>;
@@ -104,11 +106,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 1 1>;
 			linux,code = <0x198>;
 		};
+
 		system {
 			label = "system";
 			gpios = <&gpio0 2 1>;

target/linux/ramips/dts/MOFI3500-3GN.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -54,18 +53,22 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		usb {
 			label = "mofi3500-3gn:green:usb";
 			gpios = <&gpio0 8 1>;
 		};
+
 		3g {
 			label = "mofi3500-3gn:green:3g";
 			gpios = <&gpio0 11 1>;
 		};
+
 		status {
 			label = "mofi3500-3gn:green:status";
 			gpios = <&gpio0 12 1>;
 		};
+
 		wps {
 			label = "mofi3500-3gn:green:wps";
 			gpios = <&gpio0 14 1>;
@@ -77,16 +80,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		connect {
 			label = "connect";
 			gpios = <&gpio0 7 1>;
 			linux,code = <0xda>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/MPRA1.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -41,6 +42,7 @@
 				};
 			};
 		};
+
 		gpio1: gpio@660 {
 			status = "okay";
 		};
@@ -77,10 +79,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		system {
 			label = "hame:blue:system";
 			gpios = <&gpio0 20 1>;
 		};
+
 		power {
 			label = "hame:red:power";
 			gpios = <&gpio0 17 1>;
@@ -92,6 +96,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		wps {
 			label = "reset";
 			gpios = <&gpio0 0 1>;
@@ -108,6 +113,7 @@
 			gpio-export,output = <1>;
 			gpios = <&gpio0 7 0>;
 		};
+
 		root_hub {
 			gpio-export,name = "root_hub";
 			gpio-export,output = <1>;

target/linux/ramips/dts/MPRA2.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -74,10 +75,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		system {
 			label = "hame:blue:system";
 			gpios = <&gpio0 20 1>;
 		};
+
 		power {
 			label = "hame:red:power";
 			gpios = <&gpio0 17 1>;
@@ -89,6 +92,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		wps {
 			label = "reset";
 			gpios = <&gpio0 0 1>;
@@ -105,6 +109,7 @@
 			gpio-export,output = <1>;
 			gpios = <&gpio0 7 0>;
 		};
+
 		root_hub {
 			gpio-export,name = "root_hub";
 			gpio-export,output = <1>;

target/linux/ramips/dts/MR-102N.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -74,14 +73,17 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		usb {
 			label = "mr-102n:green:usb";
 			gpios = <&gpio0 8 1>;
 		};
+
 		status {
 			label = "mr-102n:amber:status";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wlan {
 			label = "mr-102n:green:wlan";
 			gpios = <&gpio0 11 1>;
@@ -93,11 +95,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 13 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 18 1>;

target/linux/ramips/dts/MT7620a.dts

@@ -55,10 +55,8 @@
 
 	ethernet@10100000 {
 		status = "okay";
-
 		pinctrl-names = "default";
 		pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
 		ralink,port-map = "llllw";
 
 		port@4 {
@@ -105,11 +103,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		s2 {
 			label = "S2";
 			gpios = <&gpio0 1 1>;
 			linux,code = <0x100>;
 		};
+
 		s3 {
 			label = "S3";
 			gpios = <&gpio0 2 1>;

target/linux/ramips/dts/MT7620a_MT7530.dts

@@ -55,10 +55,8 @@
 
 	ethernet@10100000 {
 		status = "okay";
-
 		pinctrl-names = "default";
 		pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
 		ralink,port-map = "llllw";
 
 		port@5 {
@@ -74,22 +72,27 @@
 				reg = <0>;
 				phy-mode = "rgmii";
 			};
+
 			phy1: ethernet-phy@1 {
 				reg = <1>;
 				phy-mode = "rgmii";
 			};
+
 			phy2: ethernet-phy@2 {
 				reg = <2>;
 				phy-mode = "rgmii";
 			};
+
 			phy3: ethernet-phy@3 {
 				reg = <3>;
 				phy-mode = "rgmii";
 			};
+
 			phy4: ethernet-phy@4 {
 				reg = <4>;
 				phy-mode = "rgmii";
 			};
+
 			phy1f: ethernet-phy@1f {
 				reg = <0x1f>;
 				phy-mode = "rgmii";

target/linux/ramips/dts/MT7620a_MT7610e.dts

@@ -50,10 +50,8 @@
 
 	ethernet@10100000 {
 		status = "okay";
-
 		pinctrl-names = "default";
 		pinctrl-0 = <&ephy_pins>;
-
 		ralink,port-map = "llllw";
 	};
 
@@ -74,11 +72,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 12 1>;
 			linux,code = <0x100>;
 		};
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 13 1>;

target/linux/ramips/dts/MT7620a_V22SG.dts

@@ -6,9 +6,6 @@
 	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
 	model = "Ralink MT7620a V22SG High Power evaluation board";
 
-	/*palmbus@10000000 {
-	};*/
-
 	pinctrl {
 		state_default: pinctrl0 {
 			gpio {
@@ -20,10 +17,8 @@
 
 	ethernet@10100000 {
 		status = "okay";
-
 		pinctrl-names = "default";
 		pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
 		ralink,port-map = "llllw";
 
 		port@4 {
@@ -74,11 +69,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 1 1>;
 			linux,code = <0x198>;
 		};
+
 		aoss {
 			label = "aoss";
 			gpios = <&gpio0 2 1>;
@@ -90,21 +87,25 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "mtk,mt7620-nand";
+
 		partition@0 {
 			label = "u-boot";
 			reg = <0x0 0x40000>;
 			read-only;
 		};
+
 		partition@40000 {
 			label = "u-boot-env";
 			reg = <0x40000 0x20000>;
 			read-only;
 		};
+
 		factory: partition@60000 {
 			label = "factory";
 			reg = <0x60000 0x20000>;
 			read-only;
 		};
+
 		partition@80000 {
 			label = "firmware";
 			reg = <0x80000 0x7f80000>;

target/linux/ramips/dts/MZK-750DHP.dts

@@ -60,7 +60,6 @@
 	ethernet@10100000 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ephy_pins>;
-
 		mtd-mac-address = <&factory 0x4>;
 		ralink,port-map = "llllw";
 	};
@@ -79,10 +78,12 @@
 	
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		wps {
 			label = "mzk750:green:wps";
 			gpios = <&gpio1 11 1>;
 		};
+
 		power {
 			label = "mzk750:green:power";
 			gpios = <&gpio1 15 1>;
@@ -94,11 +95,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		s1 {
 			label = "reset";
 			gpios = <&gpio0 1 1>;
 			linux,code = <0x100>;
 		};
+
 		s2 {
 			label = "wps";
 			gpios = <&gpio0 2 1>;

target/linux/ramips/dts/MZK-DP150N.dts

@@ -78,6 +78,7 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "mzkdp150n:green:power";
 			gpios = <&gpio0 9 1>;
@@ -89,6 +90,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;

target/linux/ramips/dts/MZK-W300NH2.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -68,14 +67,17 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "mzkw300nh2:green:power";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wlan {
 			label = "mzkw300nh2:amber:wlan";
 			gpios = <&gpio0 14 1>;
 		};
+
 		wps {
 			label = "mzkw300nh2:amber:wps";
 			gpios = <&gpio0 11 1>;
@@ -87,16 +89,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 12 1>;
 			linux,code = <0x211>;
 		};
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x198>;
 		};
+
 		rt {
 			label = "rt";
 			gpios = <&gpio0 13 1>;

target/linux/ramips/dts/MicroWRT.dts

@@ -93,15 +93,17 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 1 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 2 1>;
 			linux,code = <0x211>;
 		};
 	};
-   };
+};

target/linux/ramips/dts/NA930.dts

@@ -16,6 +16,7 @@
 				ralink,group = "i2c", "rgmii2", "spi", "ephy";
 				ralink,function = "gpio";
 			};
+
 			uartf_gpio {
 				ralink,group = "uartf";
 				ralink,function = "gpio uartf";
@@ -41,21 +42,25 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "mtk,mt7620-nand";
+
 		partition@0 {
 			label = "u-boot";
 			reg = <0x0 0x20000>;
 			read-only;
 		};
+
 		partition@200000 {
 			label = "factory";
 			reg = <0x200000 0x40000>;
 			read-only;
 		};
+
 		partition@240000 {
 			label = "Config";
 			reg = <0x240000 0x400000>;
 			read-only;
 		};
+
 		partition@640000 {
 			label = "firmware";
 			reg = <0x640000 0x1400000>;
@@ -64,10 +69,8 @@
 
 	ethernet@10100000 {
 		status = "okay";
-
 		pinctrl-names = "default";
 		pinctrl-0 = <&rgmii1_pins &mdio_pins>;
-
 		ralink,port-map = "llllw";
 
 		port@4 {
@@ -102,16 +105,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 11 1>;
 			linux,code = <0x198>;
 		};
+
 		zwave {
 			label = "zwave";
 			gpios = <&gpio0 12 1>;
 			linux,code = <0x100>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 14 1>;
@@ -121,18 +127,22 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		zwave {
 			label = "na930:blue:zwave";
 			gpios = <&gpio2 0 1>;
 		};
+
 		status {
 			label = "na930:blue:status";
 			gpios = <&gpio2 26 1>;
 		};
+
 		service {
 			label = "na930:blue:service";
 			gpios = <&gpio2 28 1>;
 		};
+
 		power {
 			label = "na930:blue:power";
 			gpios = <&gpio2 29 1>;

target/linux/ramips/dts/NBG-419N.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -62,10 +61,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "nbg-419n:green:power";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wps {
 			label = "nbg-419n:green:wps";
 			gpios = <&gpio0 14 1>;
@@ -77,11 +78,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/NCS601W.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -71,44 +72,4 @@
 	ohci@101c1000 {
 		status = "okay";
 	};
-
-/*	gpio-leds {
-		compatible = "gpio-leds";
-		system {
-			label = "mpr-a1:blue:system";
-			gpios = <&gpio0 20 1>;
-		};
-		power {
-			label = "mpr-a1:red:power";
-			gpios = <&gpio0 17 1>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-		wps {
-			label = "reset";
-			gpios = <&gpio0 0 1>;
-			linux,code = <0x198>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		usb {
-			gpio-export,name = "usb";
-			gpio-export,output = <1>;
-			gpios = <&gpio0 7 0>;
-		};
-		root_hub {
-			gpio-export,name = "root_hub";
-			gpio-export,output = <1>;
-			gpios = <&gpio0 12 0>;
-		};
-	}; */
 };

target/linux/ramips/dts/NW718.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -66,14 +67,17 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		cpu {
 			label = "nw718:amber:cpu";
 			gpios = <&gpio0 13 1>;
 		};
+
 		usb {
 			label = "nw718:amber:usb";
 			gpios = <&gpio0 8 1>;
 		};
+
 		wps {
 			label = "nw718:amber:wps";
 			gpios = <&gpio0 14 1>;
@@ -85,11 +89,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/OLINUXINO-RT5350F-EVB.dts

@@ -3,99 +3,100 @@
 /include/ "rt5350.dtsi"
 
 / {
-        compatible = "RT5350F-OLINUXINO", "ralink,rt5350-soc";
-        model = "RT5350F-OLINUXINO";
-
-        palmbus@10000000 {
-                spi@b00 {
-                        status = "okay";
-                        m25p80@0 {
-                                #address-cells = <1>;
-                                #size-cells = <1>;
-                                compatible = "s25fl064k";
-                                reg = <0 0>;
-                                linux,modalias = "m25p80", "s25fl064k";
-                                spi-max-frequency = <10000000>;
-
-                                partition@0 {
-                                        label = "u-boot";
-                                        reg = <0x0 0x30000>;
-                                        read-only;
-                                };
-
-                                partition@30000 {
-                                        label = "u-boot-env";
-                                        reg = <0x30000 0x10000>;
-                                        read-only;
-                                };
-
-                                factory: partition@40000 {
-                                        label = "factory";
-                                        reg = <0x40000 0x10000>;
-                                        read-only;
-                                };
-
-                                partition@50000 {
-                                        label = "firmware";
-                                        reg = <0x50000 0x3b0000>;
-                                };
-                        };
-                };
-                gpio1: gpio@660 {
-                        status = "okay";
-                };
-        };
-
-        pinctrl {
-                state_default: pinctrl0 {
-                        gpio {
-                                ralink,group = "jtag", "rgmii", "mdio", "uartf";
-                                ralink,function = "gpio";
-                        };
-                };
-        };
-
-        ethernet@10100000 {
-                mtd-mac-address = <&factory 0x4>;
-        };
-
-        esw@10110000 {
-                ralink,portmap = <0x2f>;
-                ralink,led_polarity = <0x17>;
-        };
-
-        wmac@10180000 {
-                ralink,mtd-eeprom = <&factory 0>;
-        };
-
-        ehci@101c0000 {
-                status = "okay";
-        };
-
-        ohci@101c1000 {
-                status = "okay";
-        };
-
-        gpio_export {
-                compatible = "gpio-export";
-                #size-cells = <0>;
-
-                relay1 {
-                        gpio-export,name = "gpio12";
-                        gpio-export,output = <0>;
-                        gpios = <&gpio0 12 0>;
-                };
-
-                relay2 {
-                        gpio-export,name = "gpio14";
-                        gpio-export,output = <0>;
-                        gpios = <&gpio0 14 0>;
-                };
-
-                button {
-                        gpio-export,name = "button";
-                        gpios = <&gpio0 0 1>;
-                };
-
-        };
+	compatible = "RT5350F-OLINUXINO", "ralink,rt5350-soc";
+	model = "RT5350F-OLINUXINO";
+
+	palmbus@10000000 {
+		spi@b00 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "s25fl064k";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "s25fl064k";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x3b0000>;
+				};
+			};
+		};
+
+		gpio1: gpio@660 {
+			status = "okay";
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "jtag", "rgmii", "mdio", "uartf";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		mtd-mac-address = <&factory 0x4>;
+	};
+
+	esw@10110000 {
+		ralink,portmap = <0x2f>;
+		ralink,led_polarity = <0x17>;
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		relay1 {
+			gpio-export,name = "gpio12";
+			gpio-export,output = <0>;
+			gpios = <&gpio0 12 0>;
+		};
+
+		relay2 {
+			gpio-export,name = "gpio14";
+			gpio-export,output = <0>;
+			gpios = <&gpio0 14 0>;
+		};
+
+		button {
+			gpio-export,name = "button";
+			gpios = <&gpio0 0 1>;
+		};
+	};
 };

target/linux/ramips/dts/OLINUXINO-RT5350F.dts

@@ -3,77 +3,78 @@
 /include/ "rt5350.dtsi"
 
 / {
-        compatible = "RT5350F-OLINUXINO", "ralink,rt5350-soc";
-        model = "RT5350F-OLINUXINO";
+	compatible = "RT5350F-OLINUXINO", "ralink,rt5350-soc";
+	model = "RT5350F-OLINUXINO";
 
-        palmbus@10000000 {
-                spi@b00 {
-                        status = "okay";
-                        m25p80@0 {
-                                #address-cells = <1>;
-                                #size-cells = <1>;
-                                compatible = "s25fl064k";
-                                reg = <0 0>;
-                                linux,modalias = "m25p80", "s25fl064k";
-                                spi-max-frequency = <10000000>;
+	palmbus@10000000 {
+		spi@b00 {
+			status = "okay";
 
-                                partition@0 {
-                                        label = "u-boot";
-                                        reg = <0x0 0x30000>;
-                                        read-only;
-                                };
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "s25fl064k";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "s25fl064k";
+				spi-max-frequency = <10000000>;
 
-                                partition@30000 {
-                                        label = "u-boot-env";
-                                        reg = <0x30000 0x10000>;
-                                        read-only;
-                                };
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
 
-                                factory: partition@40000 {
-                                        label = "factory";
-                                        reg = <0x40000 0x10000>;
-                                        read-only;
-                                };
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
 
-                                partition@50000 {
-                                        label = "firmware";
-                                        reg = <0x50000 0x3b0000>;
-                                };
-                        };
-                };
-                gpio1: gpio@660 {
-                        status = "okay";
-                };
-        };
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
 
-        pinctrl {
-                state_default: pinctrl0 {
-                        gpio {
-                                ralink,group = "jtag", "rgmii", "mdio", "uartf";
-                                ralink,function = "gpio";
-                        };
-                };
-        };
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x3b0000>;
+				};
+			};
+		};
 
-        ethernet@10100000 {
-                mtd-mac-address = <&factory 0x4>;
-        };
+		gpio1: gpio@660 {
+			status = "okay";
+		};
+	};
 
-        esw@10110000 {
-                ralink,portmap = <0x2f>;
-                ralink,led_polarity = <0x17>;
-        };
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "jtag", "rgmii", "mdio", "uartf";
+				ralink,function = "gpio";
+			};
+		};
+	};
 
-        wmac@10180000 {
-                ralink,mtd-eeprom = <&factory 0>;
-        };
+	ethernet@10100000 {
+		mtd-mac-address = <&factory 0x4>;
+	};
 
-        ehci@101c0000 {
-                status = "okay";
-        };
+	esw@10110000 {
+		ralink,portmap = <0x2f>;
+		ralink,led_polarity = <0x17>;
+	};
 
-        ohci@101c1000 {
-                status = "okay";
-        };
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
 
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
 };

target/linux/ramips/dts/OMNI-EMB-HPM.dts

@@ -18,7 +18,6 @@
 				compatible = "macronix,mx25l12805d";
 				spi-max-frequency = <25000000>;
 				reg = <0>;
-
 				#address-cells = <1>;
 				#size-cells = <1>;
 
@@ -88,6 +87,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <100>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 14 0>;
@@ -102,22 +102,27 @@
 			label = "emb:orange:power";
 			gpios = <&gpio0 7 1>;
 		};
+
 		status {
 			label = "emb:green:status";
 			gpios = <&gpio0 21 1>;
 		};
+
 		eth {
 			label = "emb:green:eth";
 			gpios = <&gpio0 20 1>;
 		};
+
 		eth2 {
 			label = "emb:red:eth";
 			gpios = <&gpio0 18 1>;
 		};
+
 		wifi {
 			label = "emb:green:wifi";
 			gpios = <&gpio0 17 1>;
 		};
+
 		wifi2 {
 			label = "emb:red:wifi";
 			gpios = <&gpio0 19 1>;
@@ -128,11 +133,13 @@
 		compatible = "gpio-export";
 		#size-cells = <0>;
 		/* gpio 12 and 13 handle the OC input */
+
 		usb0 {
 			gpio-export,name = "usb0";
 			gpio-export,output = <1>;
 			gpios = <&gpio0 2 0>;
 		};
+
 		usb1 {
 			gpio-export,name = "usb1";
 			gpio-export,output = <1>;

target/linux/ramips/dts/OMNI-EMB.dts

@@ -17,10 +17,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		status {
 			label = "emb:green:status";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wlan {
 			label = "emb:green:wlan";
 			gpios = <&gpio0 14 1>;
@@ -32,6 +34,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 12 1>;
@@ -42,7 +45,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;

target/linux/ramips/dts/OMNI-PLUG.dts

@@ -5,7 +5,7 @@
 / {
 	compatible = "OMNI-PLUG", "ralink,rt5350-soc";
 	model = "Omnima MiniPlug";
-	
+
 	pinctrl {
 		state_default: pinctrl0 {
 			gpio {
@@ -14,13 +14,15 @@
 			};
 		};
 	};
-	
+
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		wlan {
 			label = "miniplug:red:wlan";
 			gpios = <&gpio0 9 0>;
 		};
+
 		mobile {
 			label = "miniplug:green:mobile";
 			gpios = <&gpio0 13 1>;
@@ -32,21 +34,25 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x211>;
 		};
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x211>;
 		};
+
 		mode-one {
 			label = "mode1";
 			gpios = <&gpio0 11 1>;
 			linux,code = <0x211>;
 		};
+
 		mode-two {
 			label = "mode2";
 			gpios = <&gpio0 12 1>;
@@ -61,6 +67,7 @@
 
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -94,7 +101,7 @@
 			};
 		};
 	};
-	
+
 	ethernet@10100000 {
 		mtd-mac-address = <&factory 0x4>;
 	};
@@ -106,7 +113,7 @@
 	wmac@10180000 {
 		ralink,mtd-eeprom = <&factory 0>;
 	};
-	
+
 	otg@101c0000 {
 		status = "okay";
 	};

target/linux/ramips/dts/OY-0001.dts

@@ -6,9 +6,9 @@
 	compatible = "ralink,mt7620a-soc";
 	model = "OY-0001";
 
-        chosen {
-                bootargs = "console=ttyS0,115200";
-        };
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
 
 	palmbus@10000000 {
 		gpio2: gpio@660 {
@@ -69,7 +69,6 @@
 	ethernet@10100000 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ephy_pins>;
-
 		ralink,port-map = "llllw";
 	};
 
@@ -83,10 +82,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		powerled {
 			label = "oy:green:power";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wifiled {
 			label = "oy:green:wifi";
 			gpios = <&gpio3 0 1>;
@@ -114,6 +115,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		s1 {
 			label = "reset";
 			gpios = <&gpio0 1 1>;

target/linux/ramips/dts/PBR-M1.dts

@@ -60,22 +60,19 @@
 		i2c@900 {
 			compatible = "ralink,i2c-mt7621";
 			reg = <0x900 0x100>;
-
 			#address-cells = <1>;
 			#size-cells = <0>;
-
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c_pins>;
-
 			status = "okay";
 
 			pcf8563: rtc@51 {
 				status = "okay";
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
-            };
-        };
-    };
+			};
+		};
+	};
 
 	pcie@1e140000 {
 		status = "okay";
@@ -132,6 +129,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 18 1>;
@@ -141,7 +139,7 @@
 
 	pinctrl {
 		state_default: pinctrl0 {
-		gpio {
+			gpio {
 				ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
 				ralink,function = "gpio";
 			};

target/linux/ramips/dts/PSR-680W.dts

@@ -22,7 +22,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -66,6 +65,7 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		wan {
 			label = "psr-680w:red:wan";
 			gpios = <&gpio0 19 1>;
@@ -77,6 +77,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/PWH2004.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -50,10 +49,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		wifi {
 			label = "pwh2004:red:wifi";
 			gpios = <&gpio0 14 1>;
 		};
+
 		power {
 			label = "pwh2004:green:power";
 			gpios = <&gpio0 9 1>;
@@ -65,6 +66,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 12 1>;

target/linux/ramips/dts/PX4885-4M.dts

@@ -6,6 +6,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;

target/linux/ramips/dts/PX4885-8M.dts

@@ -6,6 +6,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;

target/linux/ramips/dts/PX4885.dtsi

@@ -30,6 +30,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
@@ -39,10 +40,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		orange {
 			label = "7links:orange:wifi";
 			gpios = <&gpio0 18 1>;
 		};
+
 		blue {
 			label = "7links:blue:storage";
 			gpios = <&gpio0 19 1>;

target/linux/ramips/dts/RE6500.dts

@@ -86,10 +86,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		wifi {
 			label = "linksys:orange:wifi";
 			gpios = <&gpio0 0 1>;
 		};
+
 		power {
 			label = "linksys:white:power";
 			gpios = <&gpio0 9 1>;
@@ -101,11 +103,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x211>;
 		};
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 11 0>;

target/linux/ramips/dts/RP-N53.dts

@@ -17,7 +17,6 @@
 
 		i2s@a00 {
 			status = "okay";
-
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcm_i2s_pins>;
 		};
@@ -78,7 +77,6 @@
 
 	gsw@10110000 {
 		ralink,port4 = "ephy";
-
 		pinctrl-names = "default";
 		pinctrl-0 = <&ephy_pins>;
 	};
@@ -92,21 +90,25 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		touch {
 			label = "touch";
 			gpios = <&gpio1 0 1>;
 			linux,code = <0x100>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio1 1 1>;
 			linux,code = <0x100>;
 		};
+
 		reset {
 			label = "reset";
 			gpios = <&gpio1 2 1>;
 			linux,code = <0x100>;
 		};
+
 		audio {
 			label = "audio";
 			gpios = <&gpio1 3 0>;
@@ -116,34 +118,42 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		backlight {
 			label = "asus:white:back";
 			gpios = <&gpio1 4 1>;
 		};
+
 		wifi0 {
 			label = "asus:blue:5g3";
 			gpios = <&gpio1 5 1>;
 		};
+
 		wifi1 {
 			label = "asus:blue:5g2";
 			gpios = <&gpio1 6 1>;
 		};
+
 		wifi2 {
 			label = "asus:blue:5g1";
 			gpios = <&gpio1 7 1>;
 		};
+
 		wifi3 {
 			label = "asus:blue:wifi";
 			gpios = <&gpio1 8 1>;
 		};
+
 		wifi4 {
 			label = "asus:blue:2g1";
 			gpios = <&gpio1 9 1>;
 		};
+
 		wifi5 {
 			label = "asus:blue:2g2";
 			gpios = <&gpio1 10 1>;
 		};
+
 		wifi6 {
 			label = "asus:blue:2g3";
 			gpios = <&gpio1 11 1>;

target/linux/ramips/dts/RT-G32-B1.dts

@@ -9,6 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -69,11 +70,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/RT-N10-PLUS.dts

@@ -9,7 +9,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -53,6 +52,7 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		wps {
 			label = "asus:green:wps";
 			gpios = <&gpio0 14 1>;
@@ -64,11 +64,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/RT-N13U.dts

@@ -18,7 +18,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -50,10 +49,12 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "rt-n13u:power";
 			gpios = <&gpio0 7 1>;
 		};
+
 		wifi {
 			label = "rt-n13u:wifi";
 			gpios = <&gpio0 8 1>;
@@ -65,11 +66,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <10>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;

target/linux/ramips/dts/RT-N14U.dts

@@ -81,22 +81,27 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		wan {
 			label = "asus:blue:wan";
 			gpios = <&gpio2 0 1>;
 		};
+
 		lan {
 			label = "asus:blue:lan";
 			gpios = <&gpio2 1 1>;
 		};
+
 		usb {
 			label = "asus:blue:usb";
 			gpios = <&gpio2 2 1>;
 		};
+
 		power {
 			label = "asus:blue:power";
 			gpios = <&gpio2 3 1>;
 		};
+
 		air {
 			label = "asus:blue:air";
 			gpios = <&gpio3 0 1>;
@@ -108,11 +113,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 1 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 2 1>;