kernel: update kernel 3.18 to version 3.18.23

Changelog:
 * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.22
 * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.23

Signed-off-by: Hauke Mehrtens <[email protected]>

SVN-Revision: 47334

include/kernel-version.mk

@@ -2,12 +2,12 @@
 
 LINUX_RELEASE?=1
 
-LINUX_VERSION-3.18 = .21
+LINUX_VERSION-3.18 = .23
 LINUX_VERSION-4.0 = .9
 LINUX_VERSION-4.1 = .11
 LINUX_VERSION-4.3 = -rc7
 
-LINUX_KERNEL_MD5SUM-3.18.21 = e4248caaa4cef318c04657e971b37298
+LINUX_KERNEL_MD5SUM-3.18.23 = dc6d265ab38716be3676ac294b481ad8
 LINUX_KERNEL_MD5SUM-4.0.9 = 40fc5f6e2d718e539b45e6601c71985b
 LINUX_KERNEL_MD5SUM-4.1.11 = 63e5981e38f935772a5309289fe76972
 LINUX_KERNEL_MD5SUM-4.3-rc7 = b33f9c9c1a597bb8e0d6f84c074e733f

target/linux/cns3xxx/patches-3.18/075-spi_support.patch

@@ -39,7 +39,7 @@
  		if (status > 0)
 --- a/include/linux/spi/spi.h
 +++ b/include/linux/spi/spi.h
-@@ -628,6 +628,13 @@ struct spi_transfer {
+@@ -630,6 +630,13 @@ struct spi_transfer {
  	u32		speed_hz;
  
  	struct list_head transfer_list;

target/linux/generic/patches-3.18/090-overlayfs-fallback-to-readonly-when-full.patch

@@ -88,7 +88,7 @@ Miklos
  		err = PTR_ERR(opaquedir);
 --- a/fs/overlayfs/super.c
 +++ b/fs/overlayfs/super.c
-@@ -740,9 +740,15 @@ static int ovl_fill_super(struct super_b
+@@ -741,9 +741,15 @@ static int ovl_fill_super(struct super_b
  	ufs->workdir = ovl_workdir_create(ufs->upper_mnt, workpath.dentry);
  	err = PTR_ERR(ufs->workdir);
  	if (IS_ERR(ufs->workdir)) {

target/linux/generic/patches-3.18/092-02-spi-Pump-transfers-inside-calling-context-for-spi_sy.patch

@@ -116,7 +116,7 @@ Signed-off-by: Mark Brown <[email protected]>
  static int spi_master_initialize_queue(struct spi_master *master)
  {
  	int ret;
-@@ -2105,19 +2128,46 @@ static int __spi_sync(struct spi_device
+@@ -2104,19 +2127,46 @@ static int __spi_sync(struct spi_device
  	DECLARE_COMPLETION_ONSTACK(done);
  	int status;
  	struct spi_master *master = spi->master;

target/linux/generic/patches-3.18/092-03-spi-Only-idle-the-message-pump-in-the-worker-kthread.patch

@@ -72,7 +72,7 @@ Signed-off-by: Mark Brown <[email protected]>
  static int spi_init_queue(struct spi_master *master)
  {
  	struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 };
-@@ -2166,7 +2186,7 @@ static int __spi_sync(struct spi_device
+@@ -2165,7 +2185,7 @@ static int __spi_sync(struct spi_device
  		 * can.
  		 */
  		if (master->transfer == spi_queued_transfer)

target/linux/generic/patches-3.18/630-packet_socket_type.patch

@@ -83,7 +83,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	if (!net_eq(dev_net(dev), sock_net(sk)))
  		goto drop;
  
-@@ -2809,6 +2811,7 @@ static int packet_create(struct net *net
+@@ -2807,6 +2809,7 @@ static int packet_create(struct net *net
  	spin_lock_init(&po->bind_lock);
  	mutex_init(&po->pg_vec_lock);
  	po->prot_hook.func = packet_rcv;
@@ -91,7 +91,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  
  	if (sock->type == SOCK_PACKET)
  		po->prot_hook.func = packet_rcv_spkt;
-@@ -3389,6 +3392,16 @@ packet_setsockopt(struct socket *sock, i
+@@ -3387,6 +3390,16 @@ packet_setsockopt(struct socket *sock, i
  		po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
  		return 0;
  	}
@@ -108,7 +108,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	default:
  		return -ENOPROTOOPT;
  	}
-@@ -3440,6 +3453,13 @@ static int packet_getsockopt(struct sock
+@@ -3438,6 +3451,13 @@ static int packet_getsockopt(struct sock
  	case PACKET_VNET_HDR:
  		val = po->has_vnet_hdr;
  		break;

target/linux/generic/patches-3.18/653-disable_netlink_trim.patch

@@ -1,6 +1,6 @@
 --- a/net/netlink/af_netlink.c
 +++ b/net/netlink/af_netlink.c
-@@ -1690,27 +1690,7 @@ void netlink_detachskb(struct sock *sk,
+@@ -1721,27 +1721,7 @@ void netlink_detachskb(struct sock *sk,
  
  static struct sk_buff *netlink_trim(struct sk_buff *skb, gfp_t allocation)
  {

target/linux/generic/patches-3.18/680-NET-skip-GRO-for-foreign-MAC-addresses.patch

@@ -17,7 +17,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
 
 --- a/net/core/dev.c
 +++ b/net/core/dev.c
-@@ -4001,6 +4001,9 @@ static enum gro_result dev_gro_receive(s
+@@ -4002,6 +4002,9 @@ static enum gro_result dev_gro_receive(s
  	enum gro_result ret;
  	int grow;
  
@@ -27,7 +27,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	if (!(skb->dev->features & NETIF_F_GRO))
  		goto normal;
  
-@@ -5064,6 +5067,48 @@ static void __netdev_adjacent_dev_unlink
+@@ -5067,6 +5070,48 @@ static void __netdev_adjacent_dev_unlink
  					   &upper_dev->adj_list.lower);
  }
  
@@ -76,7 +76,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  static int __netdev_upper_dev_link(struct net_device *dev,
  				   struct net_device *upper_dev, bool master,
  				   void *private)
-@@ -5124,6 +5169,7 @@ static int __netdev_upper_dev_link(struc
+@@ -5127,6 +5172,7 @@ static int __netdev_upper_dev_link(struc
  			goto rollback_lower_mesh;
  	}
  
@@ -84,7 +84,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	call_netdevice_notifiers(NETDEV_CHANGEUPPER, dev);
  	return 0;
  
-@@ -5241,6 +5287,7 @@ void netdev_upper_dev_unlink(struct net_
+@@ -5244,6 +5290,7 @@ void netdev_upper_dev_unlink(struct net_
  	list_for_each_entry(i, &upper_dev->all_adj_list.upper, list)
  		__netdev_adjacent_dev_unlink(dev, i->dev);
  
@@ -92,7 +92,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	call_netdevice_notifiers(NETDEV_CHANGEUPPER, dev);
  }
  EXPORT_SYMBOL(netdev_upper_dev_unlink);
-@@ -5760,6 +5807,7 @@ int dev_set_mac_address(struct net_devic
+@@ -5763,6 +5810,7 @@ int dev_set_mac_address(struct net_devic
  	if (err)
  		return err;
  	dev->addr_assign_type = NET_ADDR_SET;
@@ -102,7 +102,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	return 0;
 --- a/include/linux/netdevice.h
 +++ b/include/linux/netdevice.h
-@@ -1548,6 +1548,8 @@ struct net_device {
+@@ -1556,6 +1556,8 @@ struct net_device {
  	struct netdev_hw_addr_list	mc;
  	struct netdev_hw_addr_list	dev_addrs;
  

target/linux/generic/patches-3.18/721-phy_packets.patch

@@ -1,6 +1,6 @@
 --- a/include/linux/netdevice.h
 +++ b/include/linux/netdevice.h
-@@ -1220,6 +1220,7 @@ enum netdev_priv_flags {
+@@ -1228,6 +1228,7 @@ enum netdev_priv_flags {
  	IFF_LIVE_ADDR_CHANGE		= 1<<20,
  	IFF_MACVLAN			= 1<<21,
  	IFF_XMIT_DST_RELEASE_PERM	= 1<<22,
@@ -8,7 +8,7 @@
  };
  
  #define IFF_802_1Q_VLAN			IFF_802_1Q_VLAN
-@@ -1245,6 +1246,7 @@ enum netdev_priv_flags {
+@@ -1253,6 +1254,7 @@ enum netdev_priv_flags {
  #define IFF_LIVE_ADDR_CHANGE		IFF_LIVE_ADDR_CHANGE
  #define IFF_MACVLAN			IFF_MACVLAN
  #define IFF_XMIT_DST_RELEASE_PERM	IFF_XMIT_DST_RELEASE_PERM
@@ -16,7 +16,7 @@
  
  /**
   *	struct net_device - The DEVICE structure.
-@@ -1515,6 +1517,11 @@ struct net_device {
+@@ -1523,6 +1525,11 @@ struct net_device {
  	const struct ethtool_ops *ethtool_ops;
  	const struct forwarding_accel_ops *fwd_ops;
  
@@ -28,7 +28,7 @@
  	const struct header_ops *header_ops;
  
  	unsigned int		flags;
-@@ -1579,6 +1586,10 @@ struct net_device {
+@@ -1587,6 +1594,10 @@ struct net_device {
  	void			*ax25_ptr;
  	struct wireless_dev	*ieee80211_ptr;
  

target/linux/generic/patches-3.18/810-pci_disable_common_quirks.patch

@@ -23,7 +23,7 @@
  /* The Mellanox Tavor device gives false positive parity errors
   * Mark this device with a broken_parity_status, to allow
   * PCI scanning code to "skip" this now blacklisted device.
-@@ -2905,6 +2906,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+@@ -2908,6 +2909,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
  
@@ -31,7 +31,7 @@
  
  /*
   * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.  To
-@@ -2961,6 +2963,8 @@ static void fixup_debug_report(struct pc
+@@ -2964,6 +2966,8 @@ static void fixup_debug_report(struct pc
  	}
  }
  
@@ -40,7 +40,7 @@
  /*
   * Some BIOS implementations leave the Intel GPU interrupts enabled,
   * even though no one is handling them (f.e. i915 driver is never loaded).
-@@ -2995,6 +2999,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+@@ -2998,6 +3002,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
  

target/linux/generic/patches-3.18/834-ledtrig-libata.patch

@@ -69,7 +69,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  /**
   *	ata_build_rw_tf - Build ATA taskfile for given read/write request
   *	@tf: Target ATA taskfile
-@@ -4798,6 +4811,9 @@ static struct ata_queued_cmd *ata_qc_new
+@@ -4800,6 +4813,9 @@ static struct ata_queued_cmd *ata_qc_new
  			break;
  		}
  	}
@@ -79,7 +79,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  
  	return qc;
  }
-@@ -5708,6 +5724,9 @@ struct ata_port *ata_port_alloc(struct a
+@@ -5710,6 +5726,9 @@ struct ata_port *ata_port_alloc(struct a
  	ap->stats.unhandled_irq = 1;
  	ap->stats.idle_irq = 1;
  #endif
@@ -89,7 +89,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  	ata_sff_port_init(ap);
  
  	return ap;
-@@ -5729,6 +5748,12 @@ static void ata_host_release(struct devi
+@@ -5731,6 +5750,12 @@ static void ata_host_release(struct devi
  
  		kfree(ap->pmp_link);
  		kfree(ap->slave_link);
@@ -102,7 +102,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  		kfree(ap);
  		host->ports[i] = NULL;
  	}
-@@ -6175,7 +6200,23 @@ int ata_host_register(struct ata_host *h
+@@ -6177,7 +6202,23 @@ int ata_host_register(struct ata_host *h
  		host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
  		host->ports[i]->local_port_no = i + 1;
  	}

target/linux/generic/patches-3.18/902-debloat_proc.patch

@@ -79,17 +79,17 @@
  }
 --- a/kernel/irq/proc.c
 +++ b/kernel/irq/proc.c
-@@ -328,6 +328,9 @@ void register_irq_proc(unsigned int irq,
- {
+@@ -330,6 +330,9 @@ void register_irq_proc(unsigned int irq,
+ 	static DEFINE_MUTEX(register_lock);
  	char name [MAX_NAMELEN];
  
 +	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
 +		return;
 +
- 	if (!root_irq_dir || (desc->irq_data.chip == &no_irq_chip) || desc->dir)
+ 	if (!root_irq_dir || (desc->irq_data.chip == &no_irq_chip))
  		return;
  
-@@ -364,6 +367,9 @@ void unregister_irq_proc(unsigned int ir
+@@ -379,6 +382,9 @@ void unregister_irq_proc(unsigned int ir
  {
  	char name [MAX_NAMELEN];
  
@@ -99,7 +99,7 @@
  	if (!root_irq_dir || !desc->dir)
  		return;
  #ifdef CONFIG_SMP
-@@ -399,6 +405,9 @@ void init_irq_proc(void)
+@@ -414,6 +420,9 @@ void init_irq_proc(void)
  	unsigned int irq;
  	struct irq_desc *desc;
  

target/linux/generic/patches-3.18/903-debloat_direct_io.patch

@@ -26,7 +26,7 @@
  endif
 --- a/include/linux/fs.h
 +++ b/include/linux/fs.h
-@@ -2530,12 +2530,25 @@ enum {
+@@ -2528,12 +2528,25 @@ enum {
  	DIO_ASYNC_EXTEND = 0x04,
  };
  

target/linux/imx6/patches-3.18/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch

@@ -94,7 +94,7 @@ Signed-off-by: Tim Harvey <[email protected]>
  #include <linux/delay.h>
  #include <linux/interrupt.h>
  #include <linux/ip.h>
-@@ -2231,6 +2232,126 @@ static s32 igb_init_i2c(struct igb_adapt
+@@ -2237,6 +2238,126 @@ static s32 igb_init_i2c(struct igb_adapt
  	return status;
  }
  
@@ -221,7 +221,7 @@ Signed-off-by: Tim Harvey <[email protected]>
  /**
   *  igb_probe - Device Initialization Routine
   *  @pdev: PCI device information struct
-@@ -2653,6 +2774,13 @@ static int igb_probe(struct pci_dev *pde
+@@ -2659,6 +2780,13 @@ static int igb_probe(struct pci_dev *pde
  		}
  	}
  	pm_runtime_put_noidle(&pdev->dev);
@@ -235,7 +235,7 @@ Signed-off-by: Tim Harvey <[email protected]>
  	return 0;
  
  err_register:
-@@ -2796,6 +2924,10 @@ static void igb_remove(struct pci_dev *p
+@@ -2802,6 +2930,10 @@ static void igb_remove(struct pci_dev *p
  	struct e1000_hw *hw = &adapter->hw;
  
  	pm_runtime_get_noresume(&pdev->dev);
@@ -246,7 +246,7 @@ Signed-off-by: Tim Harvey <[email protected]>
  #ifdef CONFIG_IGB_HWMON
  	igb_sysfs_exit(adapter);
  #endif
-@@ -3101,6 +3233,12 @@ static int __igb_open(struct net_device
+@@ -3115,6 +3247,12 @@ static int __igb_open(struct net_device
  	if (!resuming)
  		pm_runtime_put(&pdev->dev);
  
@@ -259,7 +259,7 @@ Signed-off-by: Tim Harvey <[email protected]>
  	/* start the watchdog. */
  	hw->mac.get_link_status = 1;
  	schedule_work(&adapter->watchdog_task);
-@@ -7097,21 +7235,41 @@ void igb_alloc_rx_buffers(struct igb_rin
+@@ -7111,21 +7249,41 @@ void igb_alloc_rx_buffers(struct igb_rin
  static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
  {
  	struct igb_adapter *adapter = netdev_priv(netdev);

target/linux/ipq806x/patches-3.18/300-arch-arm-force-ZRELADDR-on-arch-qcom.patch

@@ -44,7 +44,7 @@ Signed-off-by: Mathieu Olivari <[email protected]>
  	select GENERIC_CLOCKEVENTS
 --- a/arch/arm/Makefile
 +++ b/arch/arm/Makefile
-@@ -240,9 +240,11 @@ MACHINE  := arch/arm/mach-$(word 1,$(mac
+@@ -248,9 +248,11 @@ MACHINE  := arch/arm/mach-$(word 1,$(mac
  else
  MACHINE  :=
  endif

target/linux/kirkwood/patches-3.18/190-nsa310s.patch

@@ -290,7 +290,7 @@
 +};
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -145,6 +145,7 @@
+@@ -145,6 +145,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
  	kirkwood-ns2mini.dtb \
  	kirkwood-nsa310.dtb \
  	kirkwood-nsa310a.dtb \

target/linux/mcs814x/patches-3.18/001-platform.patch

@@ -43,7 +43,7 @@
  source "arch/arm/mach-qcom/Kconfig"
 --- a/arch/arm/Makefile
 +++ b/arch/arm/Makefile
-@@ -172,6 +172,7 @@ machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
+@@ -180,6 +180,7 @@ machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
  machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
  machine-$(CONFIG_ARCH_KS8695)		+= ks8695
  machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx

target/linux/ramips/patches-3.18/0015-MIPS-ralink-cleanup-early_printk.patch

@@ -50,7 +50,7 @@ Signed-off-by: John Crispin <[email protected]>
  
  static inline void uart_w32(u32 val, unsigned reg)
  {
-@@ -38,11 +43,46 @@
+@@ -38,11 +43,46 @@ static inline u32 uart_r32(unsigned reg)
  	return __raw_readl(uart_membase + reg);
  }
  

target/linux/ramips/patches-3.18/0030-pinctrl-ralink-add-pinctrl-driver.patch

@@ -24,7 +24,7 @@ Signed-off-by: John Crispin <[email protected]>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -453,6 +453,8 @@
+@@ -453,6 +453,8 @@ config RALINK
  	select CLKDEV_LOOKUP
  	select ARCH_HAS_RESET_CONTROLLER
  	select RESET_CONTROLLER
@@ -35,7 +35,7 @@ Signed-off-by: John Crispin <[email protected]>
  	bool "SGI IP22 (Indy/Indigo2)"
 --- a/arch/mips/include/asm/mach-ralink/mt7620.h
 +++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -90,7 +90,6 @@
+@@ -90,7 +90,6 @@ enum mt762x_soc_type {
  #define MT7620_DDR2_SIZE_MIN		32
  #define MT7620_DDR2_SIZE_MAX		256
  
@@ -43,7 +43,7 @@ Signed-off-by: John Crispin <[email protected]>
  #define MT7620_GPIO_MODE_UART0_SHIFT	2
  #define MT7620_GPIO_MODE_UART0_MASK	0x7
  #define MT7620_GPIO_MODE_UART0(x)	((x) << MT7620_GPIO_MODE_UART0_SHIFT)
-@@ -102,16 +101,36 @@
+@@ -102,16 +101,36 @@ enum mt762x_soc_type {
  #define MT7620_GPIO_MODE_GPIO_UARTF	0x5
  #define MT7620_GPIO_MODE_GPIO_I2S	0x6
  #define MT7620_GPIO_MODE_GPIO		0x7
@@ -148,7 +148,7 @@ Signed-off-by: John Crispin <[email protected]>
 +#endif
 --- a/arch/mips/include/asm/mach-ralink/rt305x.h
 +++ b/arch/mips/include/asm/mach-ralink/rt305x.h
-@@ -125,24 +125,29 @@
+@@ -125,24 +125,29 @@ static inline int soc_is_rt5350(void)
  #define RT305X_GPIO_GE0_TXD0		40
  #define RT305X_GPIO_GE0_RXCLK		51
  
@@ -263,7 +263,7 @@ Signed-off-by: John Crispin <[email protected]>
  
  #include "common.h"
  
-@@ -47,118 +48,58 @@
+@@ -47,118 +48,58 @@ enum mt762x_soc_type mt762x_soc;
  /* does the board have sdram or ddram */
  static int dram_type;
  
@@ -498,7 +498,7 @@ Signed-off-by: John Crispin <[email protected]>
  };
  
  static void rt288x_wdt_reset(void)
-@@ -69,11 +50,6 @@
+@@ -69,11 +50,6 @@ static void rt288x_wdt_reset(void)
  	rt_sysc_w32(t, SYSC_REG_CLKCFG);
  }
  
@@ -510,7 +510,7 @@ Signed-off-by: John Crispin <[email protected]>
  void __init ralink_clk_init(void)
  {
  	unsigned long cpu_rate, wmac_rate = 40000000;
-@@ -141,4 +117,6 @@
+@@ -141,4 +117,6 @@ void prom_soc_init(struct ralink_soc_inf
  	soc_info->mem_base = RT2880_SDRAM_BASE;
  	soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
  	soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
@@ -673,7 +673,7 @@ Signed-off-by: John Crispin <[email protected]>
  };
  
  static void rt305x_wdt_reset(void)
-@@ -114,14 +100,6 @@
+@@ -114,14 +100,6 @@ static void rt305x_wdt_reset(void)
  	rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
  }
  
@@ -688,7 +688,7 @@ Signed-off-by: John Crispin <[email protected]>
  static unsigned long rt5350_get_mem_size(void)
  {
  	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
-@@ -290,11 +268,14 @@
+@@ -290,11 +268,14 @@ void prom_soc_init(struct ralink_soc_inf
  	soc_info->mem_base = RT305X_SDRAM_BASE;
  	if (soc_is_rt5350()) {
  		soc_info->mem_size = rt5350_get_mem_size();
@@ -876,7 +876,7 @@ Signed-off-by: John Crispin <[email protected]>
  };
  
  static void rt3883_wdt_reset(void)
-@@ -155,17 +73,6 @@
+@@ -155,17 +73,6 @@ static void rt3883_wdt_reset(void)
  	rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
  }
  
@@ -894,7 +894,7 @@ Signed-off-by: John Crispin <[email protected]>
  void __init ralink_clk_init(void)
  {
  	unsigned long cpu_rate, sys_rate;
-@@ -244,4 +151,6 @@
+@@ -244,4 +151,6 @@ void prom_soc_init(struct ralink_soc_inf
  	soc_info->mem_base = RT3883_SDRAM_BASE;
  	soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
  	soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
@@ -903,7 +903,7 @@ Signed-off-by: John Crispin <[email protected]>
  }
 --- a/drivers/pinctrl/Kconfig
 +++ b/drivers/pinctrl/Kconfig
-@@ -103,6 +103,11 @@
+@@ -103,6 +103,11 @@ config PINCTRL_LANTIQ
  	select PINMUX
  	select PINCONF
  
@@ -917,7 +917,7 @@ Signed-off-by: John Crispin <[email protected]>
  	depends on SOC_FALCON
 --- a/drivers/pinctrl/Makefile
 +++ b/drivers/pinctrl/Makefile
-@@ -20,6 +20,7 @@
+@@ -20,6 +20,7 @@ obj-$(CONFIG_PINCTRL_BCM281XX)	+= pinctr
  obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o
  obj-$(CONFIG_PINCTRL_PALMAS)	+= pinctrl-palmas.o
  obj-$(CONFIG_PINCTRL_ROCKCHIP)	+= pinctrl-rockchip.o

target/linux/ramips/patches-3.18/0048-GPIO-ralink-add-mt7621-gpio-controller.patch

@@ -14,7 +14,7 @@ Signed-off-by: John Crispin <[email protected]>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -455,6 +455,9 @@
+@@ -455,6 +455,9 @@ config RALINK
  	select RESET_CONTROLLER
  	select PINCTRL
  	select PINCTRL_RT2880
@@ -26,7 +26,7 @@ Signed-off-by: John Crispin <[email protected]>
  	bool "SGI IP22 (Indy/Indigo2)"
 --- a/drivers/gpio/Kconfig
 +++ b/drivers/gpio/Kconfig
-@@ -898,6 +898,12 @@
+@@ -898,6 +898,12 @@ config GPIO_BCM_KONA
  	help
  	  Turn on GPIO support for Broadcom "Kona" chips.
  
@@ -41,7 +41,7 @@ Signed-off-by: John Crispin <[email protected]>
  config GPIO_VIPERBOARD
 --- a/drivers/gpio/Makefile
 +++ b/drivers/gpio/Makefile
-@@ -107,3 +107,5 @@
+@@ -107,3 +107,5 @@ obj-$(CONFIG_GPIO_XILINX)	+= gpio-xilinx
  obj-$(CONFIG_GPIO_XTENSA)	+= gpio-xtensa.o
  obj-$(CONFIG_GPIO_ZEVIO)	+= gpio-zevio.o
  obj-$(CONFIG_GPIO_ZYNQ)		+= gpio-zynq.o

target/linux/ramips/patches-3.18/0053-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch

@@ -25,7 +25,7 @@ Signed-off-by: John Crispin <[email protected]>
 
 --- a/drivers/mmc/host/Kconfig
 +++ b/drivers/mmc/host/Kconfig
-@@ -773,3 +773,5 @@
+@@ -773,3 +773,5 @@ config MMC_SUNXI
  	help
  	  This selects support for the SD/MMC Host Controller on
  	  Allwinner sunxi SoCs.

target/linux/ramips/patches-3.18/0061-SPI-ralink-add-mt7621-SoC-spi-driver.patch

@@ -1,6 +1,6 @@
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -439,6 +439,12 @@
+@@ -439,6 +439,12 @@ config SPI_RT2880
  	help
  	  This selects a driver for the Ralink RT288x/RT305x SPI Controller.
  
@@ -15,7 +15,7 @@
  	depends on ARCH_S3C24XX
 --- a/drivers/spi/Makefile
 +++ b/drivers/spi/Makefile
-@@ -46,6 +46,7 @@
+@@ -46,6 +46,7 @@ obj-$(CONFIG_SPI_LM70_LLP)		+= spi-lm70l
  obj-$(CONFIG_SPI_MPC512x_PSC)		+= spi-mpc512x-psc.o
  obj-$(CONFIG_SPI_MPC52xx_PSC)		+= spi-mpc52xx-psc.o
  obj-$(CONFIG_SPI_MPC52xx)		+= spi-mpc52xx.o

target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch

@@ -5145,7 +5145,7 @@
  /*
   * For xHCI 1.0 host controllers, TD size is the number of max packet sized
   * packets remaining in the TD (*not* including this TRB).
-@@ -3141,6 +3175,7 @@ static int queue_bulk_sg_tx(struct xhci_
+@@ -3161,6 +3195,7 @@ static int queue_bulk_sg_tx(struct xhci_
  		}
  
  		/* Set the TRB length, TD size, and interrupter fields. */
@@ -5153,7 +5153,7 @@
  		if (xhci->hci_version < 0x100) {
  			remainder = xhci_td_remainder(
  					urb->transfer_buffer_length -
-@@ -3150,6 +3185,12 @@ static int queue_bulk_sg_tx(struct xhci_
+@@ -3170,6 +3205,12 @@ static int queue_bulk_sg_tx(struct xhci_
  					trb_buff_len, total_packet_count, urb,
  					num_trbs - 1);
  		}
@@ -5166,7 +5166,7 @@
  		length_field = TRB_LEN(trb_buff_len) |
  			remainder |
  			TRB_INTR_TARGET(0);
-@@ -3212,6 +3253,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
+@@ -3234,6 +3275,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
  	int running_total, trb_buff_len, ret;
  	unsigned int total_packet_count;
  	u64 addr;
@@ -5176,10 +5176,10 @@
  
  	if (urb->num_sgs)
  		return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
-@@ -3237,6 +3281,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
+@@ -3258,6 +3302,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
+ 		num_trbs++;
  		running_total += TRB_MAX_BUFF_SIZE;
  	}
- 	/* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
 +#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
 +	switch(urb->dev->speed){
 +		case USB_SPEED_SUPER:
@@ -5202,7 +5202,7 @@
  
  	ret = prepare_transfer(xhci, xhci->devs[slot_id],
  			ep_index, urb->stream_id,
-@@ -3296,6 +3359,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
+@@ -3334,6 +3397,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
  			field |= TRB_ISP;
  
  		/* Set the TRB length, TD size, and interrupter fields. */
@@ -5210,7 +5210,7 @@
  		if (xhci->hci_version < 0x100) {
  			remainder = xhci_td_remainder(
  					urb->transfer_buffer_length -
-@@ -3305,6 +3369,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
+@@ -3343,6 +3407,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
  					trb_buff_len, total_packet_count, urb,
  					num_trbs - 1);
  		}
@@ -5221,19 +5221,19 @@
  		length_field = TRB_LEN(trb_buff_len) |
  			remainder |
  			TRB_INTR_TARGET(0);
-@@ -3394,7 +3462,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
+@@ -3432,7 +3500,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
  		field |= 0x1;
  
- 	/* xHCI 1.0 6.4.1.2.1: Transfer Type field */
+ 	/* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
 +#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
 +	if (1) {
 +#else
- 	if (xhci->hci_version == 0x100) {
+ 	if (xhci->hci_version >= 0x100) {
 +#endif
  		if (urb->transfer_buffer_length > 0) {
  			if (setup->bRequestType & USB_DIR_IN)
  				field |= TRB_TX_TYPE(TRB_DATA_IN);
-@@ -3418,7 +3490,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
+@@ -3456,7 +3528,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
  		field = TRB_TYPE(TRB_DATA);
  
  	length_field = TRB_LEN(urb->transfer_buffer_length) |
@@ -5246,7 +5246,7 @@
  		TRB_INTR_TARGET(0);
  	if (urb->transfer_buffer_length > 0) {
  		if (setup->bRequestType & USB_DIR_IN)
-@@ -3541,6 +3618,9 @@ static int xhci_queue_isoc_tx(struct xhc
+@@ -3579,6 +3656,9 @@ static int xhci_queue_isoc_tx(struct xhc
  	u64 start_addr, addr;
  	int i, j;
  	bool more_trbs_coming;
@@ -5256,7 +5256,7 @@
  
  	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
  
-@@ -3554,6 +3634,21 @@ static int xhci_queue_isoc_tx(struct xhc
+@@ -3592,6 +3672,21 @@ static int xhci_queue_isoc_tx(struct xhc
  	start_trb = &ep_ring->enqueue->generic;
  	start_cycle = ep_ring->cycle_state;
  
@@ -5278,7 +5278,7 @@
  	urb_priv = urb->hcpriv;
  	/* Queue the first TRB, even if it's zero-length */
  	for (i = 0; i < num_tds; i++) {
-@@ -3625,9 +3720,13 @@ static int xhci_queue_isoc_tx(struct xhc
+@@ -3663,9 +3758,13 @@ static int xhci_queue_isoc_tx(struct xhc
  			} else {
  				td->last_trb = ep_ring->enqueue;
  				field |= TRB_IOC;
@@ -5292,7 +5292,7 @@
  					/* Set BEI bit except for the last td */
  					if (i < num_tds - 1)
  						field |= TRB_BEI;
-@@ -3642,6 +3741,7 @@ static int xhci_queue_isoc_tx(struct xhc
+@@ -3680,6 +3779,7 @@ static int xhci_queue_isoc_tx(struct xhc
  				trb_buff_len = td_remain_len;
  
  			/* Set the TRB length, TD size, & interrupter fields. */
@@ -5300,7 +5300,7 @@
  			if (xhci->hci_version < 0x100) {
  				remainder = xhci_td_remainder(
  						td_len - running_total);
-@@ -3651,6 +3751,10 @@ static int xhci_queue_isoc_tx(struct xhc
+@@ -3689,6 +3789,10 @@ static int xhci_queue_isoc_tx(struct xhc
  						total_packet_count, urb,
  						(trbs_per_td - j - 1));
  			}
@@ -5349,7 +5349,7 @@
  /* TODO: copied from ehci-hcd.c - can this be refactored? */
  /*
   * xhci_handshake - spin reading hc until handshake completes or fails
-@@ -198,7 +220,7 @@ int xhci_reset(struct xhci_hcd *xhci)
+@@ -199,7 +221,7 @@ int xhci_reset(struct xhci_hcd *xhci)
  	return ret;
  }
  
@@ -5358,7 +5358,7 @@
  static int xhci_free_msi(struct xhci_hcd *xhci)
  {
  	int i;
-@@ -448,6 +470,11 @@ static void compliance_mode_recovery(uns
+@@ -449,6 +471,11 @@ static void compliance_mode_recovery(uns
  					"Attempting compliance mode recovery");
  			hcd = xhci->shared_hcd;
  
@@ -5370,7 +5370,7 @@
  			if (hcd->state == HC_STATE_SUSPENDED)
  				usb_hcd_resume_root_hub(hcd);
  
-@@ -497,6 +524,9 @@ static bool xhci_compliance_mode_recover
+@@ -498,6 +525,9 @@ static bool xhci_compliance_mode_recover
  {
  	const char *dmi_product_name, *dmi_sys_vendor;
  
@@ -5380,7 +5380,7 @@
  	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
  	dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
  	if (!dmi_product_name || !dmi_sys_vendor)
-@@ -542,6 +572,10 @@ int xhci_init(struct usb_hcd *hcd)
+@@ -543,6 +573,10 @@ int xhci_init(struct usb_hcd *hcd)
  		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
  				"xHCI doesn't need link TRB QUIRK");
  	}
@@ -5391,7 +5391,7 @@
  	retval = xhci_mem_init(xhci, GFP_KERNEL);
  	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
  
-@@ -626,7 +660,11 @@ int xhci_run(struct usb_hcd *hcd)
+@@ -627,7 +661,11 @@ int xhci_run(struct usb_hcd *hcd)
  			"// Set the interrupt modulation register");
  	temp = readl(&xhci->ir_set->irq_control);
  	temp &= ~ER_IRQ_INTERVAL_MASK;
@@ -5403,7 +5403,7 @@
  	writel(temp, &xhci->ir_set->irq_control);
  
  	/* Set the HCD state before we enable the irqs */
-@@ -651,6 +689,9 @@ int xhci_run(struct usb_hcd *hcd)
+@@ -652,6 +690,9 @@ int xhci_run(struct usb_hcd *hcd)
  		xhci_queue_vendor_command(xhci, command, 0, 0, 0,
  				TRB_TYPE(TRB_NEC_GET_FW));
  	}
@@ -5413,7 +5413,7 @@
  	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
  			"Finished xhci_run for USB2 roothub");
  	return 0;
-@@ -1642,6 +1683,14 @@ int xhci_drop_endpoint(struct usb_hcd *h
+@@ -1648,6 +1689,14 @@ int xhci_drop_endpoint(struct usb_hcd *h
  	u32 drop_flag;
  	u32 new_add_flags, new_drop_flags;
  	int ret;
@@ -5428,7 +5428,7 @@
  
  	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
  	if (ret <= 0)
-@@ -1689,6 +1738,40 @@ int xhci_drop_endpoint(struct usb_hcd *h
+@@ -1695,6 +1744,40 @@ int xhci_drop_endpoint(struct usb_hcd *h
  
  	xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
  
@@ -5469,7 +5469,7 @@
  	xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
  			(unsigned int) ep->desc.bEndpointAddress,
  			udev->slot_id,
-@@ -1721,6 +1804,19 @@ int xhci_add_endpoint(struct usb_hcd *hc
+@@ -1727,6 +1810,19 @@ int xhci_add_endpoint(struct usb_hcd *hc
  	u32 new_add_flags, new_drop_flags;
  	struct xhci_virt_device *virt_dev;
  	int ret = 0;
@@ -5489,7 +5489,7 @@
  
  	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
  	if (ret <= 0) {
-@@ -1787,6 +1883,56 @@ int xhci_add_endpoint(struct usb_hcd *hc
+@@ -1793,6 +1889,56 @@ int xhci_add_endpoint(struct usb_hcd *hc
  		return -ENOMEM;
  	}
  
@@ -5546,7 +5546,7 @@
  	ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
  	new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
  
-@@ -4454,8 +4600,14 @@ static u16 xhci_call_host_update_timeout
+@@ -4463,8 +4609,14 @@ static u16 xhci_call_host_update_timeout
  		u16 *timeout)
  {
  	if (state == USB3_LPM_U1)
@@ -5561,7 +5561,7 @@
  		return xhci_calculate_u2_timeout(xhci, udev, desc);
  
  	return USB3_LPM_DISABLED;
-@@ -4840,7 +4992,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
+@@ -4849,7 +5001,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
  	hcd->self.no_sg_constraint = 1;
  
  	/* XHCI controllers don't stop the ep queue on short packets :| */
@@ -5571,7 +5571,7 @@
  
  	if (usb_hcd_is_primary_hcd(hcd)) {
  		xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
-@@ -4903,6 +5057,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
+@@ -4912,6 +5066,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
  		goto error;
  	xhci_dbg(xhci, "Reset complete\n");
  
@@ -5582,7 +5582,7 @@
  	/* Set dma_mask and coherent_dma_mask to 64-bits,
  	 * if xHC supports 64-bit addressing */
  	if (HCC_64BIT_ADDR(xhci->hcc_params) &&
-@@ -4997,8 +5155,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
+@@ -5006,8 +5164,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
  MODULE_AUTHOR(DRIVER_AUTHOR);
  MODULE_LICENSE("GPL");
  

target/linux/ramips/patches-3.18/0065-mt7628-pww.patch

@@ -1,6 +1,6 @@
 --- a/drivers/pwm/Kconfig
 +++ b/drivers/pwm/Kconfig
-@@ -177,6 +177,15 @@
+@@ -177,6 +177,15 @@ config PWM_LPSS_PLATFORM
  	  To compile this driver as a module, choose M here: the module
  	  will be called pwm-lpss-platform.
  
@@ -18,7 +18,7 @@
  	depends on ARCH_MXS && OF
 --- a/drivers/pwm/Makefile
 +++ b/drivers/pwm/Makefile
-@@ -15,6 +15,7 @@
+@@ -15,6 +15,7 @@ obj-$(CONFIG_PWM_LPC32XX)	+= pwm-lpc32xx
  obj-$(CONFIG_PWM_LPSS)		+= pwm-lpss.o
  obj-$(CONFIG_PWM_LPSS_PCI)	+= pwm-lpss-pci.o
  obj-$(CONFIG_PWM_LPSS_PLATFORM)	+= pwm-lpss-platform.o

target/linux/ramips/patches-3.18/0066-cevt.patch

@@ -3,7 +3,7 @@
 @@ -45,18 +45,33 @@ static void (*systick_freq_scaling)(stru
  static void systick_set_clock_mode(enum clock_event_mode mode,
  				struct clock_event_device *evt);
-
+ 
 +static inline unsigned int read_count(struct systick_device *sdev)
 +{
 +	return ioread32(sdev->membase + SYSTICK_COUNT);
@@ -25,7 +25,7 @@
  	struct systick_device *sdev;
 -	u32 count;
 +	int res;
-
+ 
  	sdev = container_of(evt, struct systick_device, dev);
 -	count = ioread32(sdev->membase + SYSTICK_COUNT);
 -	count = (count + delta) % SYSTICK_FREQ;
@@ -33,21 +33,21 @@
 +	delta += read_count(sdev);
 +	write_compare(sdev, delta);
 +	res = ((int)(read_count(sdev) - delta) >= 0) ? -ETIME : 0;
-
+ 
 -	return 0;
 +	return res;
  }
-
+ 
  static void systick_event_handler(struct clock_event_device *dev)
 @@ -66,20 +81,25 @@ static void systick_event_handler(struct
-
+ 
  static irqreturn_t systick_interrupt(int irq, void *dev_id)
  {
 -	struct clock_event_device *dev = (struct clock_event_device *) dev_id;
 +	int ret = 0;
 +	struct clock_event_device *cdev;
 +	struct systick_device *sdev;
-
+ 
 -	dev->event_handler(dev);
 +	if (read_c0_cause() & STATUSF_IP7) {
 +		cdev = (struct clock_event_device *) dev_id;
@@ -58,11 +58,11 @@
 +		cdev->event_handler(cdev);
 +		ret = 1;
 +	}
-
+ 
 -	return IRQ_HANDLED;
 +	return IRQ_RETVAL(ret);
  }
-
+ 
  static struct systick_device systick = {
  	.dev = {
 -		/*
@@ -76,7 +76,7 @@
 @@ -126,13 +146,14 @@ static void systick_set_clock_mode(enum
  			systick_freq_scaling(sdev, 1);
  		break;
-
+ 
 +	case CLOCK_EVT_MODE_UNUSED:
  	case CLOCK_EVT_MODE_SHUTDOWN:
  		if (systick_freq_scaling)
@@ -88,26 +88,26 @@
 -		iowrite32(0, systick.membase + SYSTICK_CONFIG);
 +		iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
  		break;
-
+ 
  	default:
 @@ -142,38 +163,45 @@ static void systick_set_clock_mode(enum
  }
-
+ 
  static const struct of_device_id systick_match[] = {
 -	{ .compatible = "ralink,mt7620-systick", .data = mt7620_freq_scaling},
 +	{ .compatible = "ralink,mt7620a-systick", .data = mt7620_freq_scaling},
  	{},
  };
-
+ 
  static void __init ralink_systick_init(struct device_node *np)
  {
  	const struct of_device_id *match;
 +	int rating = 200;
-
+ 
  	systick.membase = of_iomap(np, 0);
  	if (!systick.membase)
  		return;
-
+ 
  	match = of_match_node(systick_match, np);
 -	if (match)
 +	if (match) {
@@ -118,7 +118,7 @@
 +		 */
 +		rating = 310;
 +	}
-
+ 
 -	systick_irqaction.name = np->name;
 -	systick.dev.name = np->name;
 -	clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);

target/linux/ramips/patches-3.18/0200-linkit_bootstrap.patch

@@ -1,6 +1,6 @@
 --- a/drivers/misc/Makefile
 +++ b/drivers/misc/Makefile
-@@ -56,3 +56,4 @@
+@@ -56,3 +56,4 @@ obj-$(CONFIG_GENWQE)		+= genwqe/
  obj-$(CONFIG_ECHO)		+= echo/
  obj-$(CONFIG_VEXPRESS_SYSCFG)	+= vexpress-syscfg.o
  obj-$(CONFIG_CXL_BASE)		+= cxl/

target/linux/ramips/patches-3.18/0300-mt7628_fixes.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/ralink/mt7620.c
 +++ b/arch/mips/ralink/mt7620.c
-@@ -101,28 +101,28 @@
+@@ -101,28 +101,28 @@ static struct rt2880_pmx_group mt7620a_p
  };
  
  static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
@@ -35,7 +35,7 @@
  	FUNC("pwm", 2, 45, 2),
  	FUNC("gpio", 1, 45, 2),
  	FUNC("uart1", 0, 45, 2),
-@@ -165,7 +165,7 @@
+@@ -165,7 +165,7 @@ static struct rt2880_pmx_func spi_cs1_gr
  	FUNC("-", 3, 6, 1),
  	FUNC("refclk", 2, 6, 1),
  	FUNC("gpio", 1, 6, 1),
@@ -44,7 +44,7 @@
  };
  
  static struct rt2880_pmx_func spis_grp_mt7628[] = {
-@@ -182,27 +182,43 @@
+@@ -182,27 +182,43 @@ static struct rt2880_pmx_func gpio_grp_m
  	FUNC("gpio", 0, 11, 1),
  };
  
@@ -107,7 +107,7 @@
  	GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART2),
  	GRP_G("uart1", uart1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART1),
  	GRP_G("i2c", i2c_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_I2C),
-@@ -216,6 +232,8 @@
+@@ -216,6 +232,8 @@ static struct rt2880_pmx_group mt7628an_
  	GRP_G("spi cs1", spi_cs1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_CS1),
  	GRP_G("spis", spis_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_SPIS),
  	GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_GPIO),
@@ -116,7 +116,7 @@
  	{ 0 }
  };
  
-@@ -529,7 +547,11 @@
+@@ -529,7 +547,11 @@ void prom_soc_init(struct ralink_soc_inf
  		(rev & CHIP_REV_ECO_MASK));
  
  	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);

target/linux/ramips/patches-3.18/0301-mt7688-detect.patch

@@ -20,7 +20,7 @@
  /* does the board have sdram or ddram */
  static int dram_type;
  
-@@ -391,7 +394,7 @@
+@@ -391,7 +394,7 @@ void __init ralink_clk_init(void)
  #define RINT(x)		((x) / 1000000)
  #define RFRAC(x)	(((x) / 1000) % 1000)
  
@@ -29,7 +29,7 @@
  		if (xtal_rate == MHZ(40))
  			cpu_rate = MHZ(580);
  		else
-@@ -436,7 +439,8 @@
+@@ -436,7 +439,8 @@ void __init ralink_clk_init(void)
   	ralink_clk_add("10000e00.uart2", periph_rate);
  	ralink_clk_add("10180000.wmac", xtal_rate);
  
@@ -39,8 +39,8 @@
  		/*
  		 * When the CPU goes into sleep mode, the BUS clock will be too low for
  		 * USB to function properly
-@@ -536,8 +540,15 @@
- #endif
+@@ -533,8 +537,15 @@ void prom_soc_init(struct ralink_soc_inf
+ 			soc_info->compatible = "ralink,mt7620n-soc";
  		}
  	} else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
 -		ralink_soc = MT762X_SOC_MT7628AN;
@@ -57,7 +57,7 @@
  		soc_info->compatible = "ralink,mt7628an-soc";
  	} else {
  		panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
-@@ -551,13 +562,13 @@
+@@ -548,13 +559,13 @@ void prom_soc_init(struct ralink_soc_inf
  
  	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
  
@@ -73,7 +73,7 @@
  		mt7628_dram_init(soc_info);
  	else
  		mt7620_dram_init(soc_info);
-@@ -570,7 +581,7 @@
+@@ -567,7 +578,7 @@ void prom_soc_init(struct ralink_soc_inf
  	pr_info("Digital PMU set to %s control\n",
  		(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
  
@@ -84,7 +84,7 @@
  		rt2880_pinmux_data = mt7620a_pinmux_data;
 --- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
 +++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
-@@ -24,6 +24,7 @@
+@@ -24,6 +24,7 @@ enum ralink_soc_type {
  	MT762X_SOC_MT7620N,
  	MT762X_SOC_MT7621AT,
  	MT762X_SOC_MT7628AN,
@@ -94,7 +94,7 @@
  
 --- a/drivers/net/ethernet/ralink/esw_rt3052.c
 +++ b/drivers/net/ethernet/ralink/esw_rt3052.c
-@@ -611,7 +611,7 @@
+@@ -611,7 +611,7 @@ static void esw_hw_init(struct rt305x_es
  		rt305x_mii_write(esw, 0, 29, 0x598b);
  		/* select local register */
  		rt305x_mii_write(esw, 0, 31, 0x8000);
@@ -103,7 +103,7 @@
  		int i;
  //		u32 phy_val;
  		u32 val;
-@@ -1042,7 +1042,7 @@
+@@ -1042,7 +1042,7 @@ esw_get_port_tr_badgood(struct switch_de
  	int shift = attr->id == RT5350_ESW_ATTR_PORT_TR_GOOD ? 0 : 16;
  	u32 reg;
  

target/linux/ramips/patches-3.18/0302-mt762x-vendor-id.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/ralink/mt7620.c
 +++ b/arch/mips/ralink/mt7620.c
-@@ -555,7 +555,7 @@
+@@ -552,7 +552,7 @@ void prom_soc_init(struct ralink_soc_inf
  	}
  
  	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
@@ -11,7 +11,7 @@
  		(rev & CHIP_REV_ECO_MASK));
 --- a/arch/mips/ralink/mt7621.c
 +++ b/arch/mips/ralink/mt7621.c
-@@ -168,7 +168,7 @@
+@@ -185,7 +185,7 @@ void prom_soc_init(struct ralink_soc_inf
  	rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
  
  	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,

target/linux/ramips/patches-3.18/0303-alsa.patch

@@ -1,6 +1,6 @@
 --- a/sound/soc/Kconfig
 +++ b/sound/soc/Kconfig
-@@ -56,6 +56,7 @@
+@@ -56,6 +56,7 @@ source "sound/soc/spear/Kconfig"
  source "sound/soc/tegra/Kconfig"
  source "sound/soc/txx9/Kconfig"
  source "sound/soc/ux500/Kconfig"
@@ -10,14 +10,14 @@
  source "sound/soc/codecs/Kconfig"
 --- a/sound/soc/Makefile
 +++ b/sound/soc/Makefile
-@@ -33,3 +33,4 @@
+@@ -33,3 +33,4 @@ obj-$(CONFIG_SND_SOC)	+= spear/
  obj-$(CONFIG_SND_SOC)	+= tegra/
  obj-$(CONFIG_SND_SOC)	+= txx9/
  obj-$(CONFIG_SND_SOC)	+= ux500/
 +obj-$(CONFIG_SND_SOC)   += mtk/
 --- a/sound/soc/codecs/Kconfig
 +++ b/sound/soc/codecs/Kconfig
-@@ -725,7 +725,7 @@
+@@ -725,7 +725,7 @@ config SND_SOC_WM8955
  	tristate
  
  config SND_SOC_WM8960
@@ -7371,7 +7371,7 @@
 +#endif
 --- a/sound/soc/soc-core.c
 +++ b/sound/soc/soc-core.c
-@@ -1851,7 +1851,8 @@
+@@ -1851,7 +1851,8 @@ static int soc_probe(struct platform_dev
  	/* Bodge while we unpick instantiation */
  	card->dev = &pdev->dev;
  
@@ -8107,7 +8107,7 @@
  	{  0x4, 0x0000 },
  	{  0x5, 0x0008 },
  	{  0x6, 0x0000 },
-@@ -88,8 +89,8 @@
+@@ -88,8 +89,8 @@ static const struct reg_default wm8960_r
  	{ 0x25, 0x0050 },
  	{ 0x26, 0x0000 },
  	{ 0x27, 0x0000 },
@@ -8118,7 +8118,7 @@
  	{ 0x2a, 0x0040 },
  	{ 0x2b, 0x0000 },
  	{ 0x2c, 0x0000 },
-@@ -127,8 +128,15 @@
+@@ -127,8 +128,15 @@ struct wm8960_priv {
  	int playback_fs;
  };
  
@@ -8135,7 +8135,7 @@
  /* enumerated controls */
  static const char *wm8960_polarity[] = {"No Inversion", "Left Inverted",
  	"Right Inverted", "Stereo Inversion"};
-@@ -181,8 +189,8 @@
+@@ -181,8 +189,8 @@ static int wm8960_get_deemph(struct snd_
  	struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
  	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
  
@@ -8146,7 +8146,7 @@
  }
  
  static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
-@@ -200,6 +208,70 @@
+@@ -200,6 +208,70 @@ static int wm8960_put_deemph(struct snd_
  	return wm8960_set_deemph(codec);
  }
  
@@ -8217,7 +8217,7 @@
  static const DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 50, 0);
  static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1);
  static const DECLARE_TLV_DB_SCALE(bypass_tlv, -2100, 300, 0);
-@@ -542,6 +614,7 @@
+@@ -542,6 +614,7 @@ static int wm8960_set_dai_fmt(struct snd
  
  	/* set iface */
  	snd_soc_write(codec, WM8960_IFACE1, iface);
@@ -8225,7 +8225,7 @@
  	return 0;
  }
  
-@@ -623,11 +696,16 @@
+@@ -623,11 +696,16 @@ static int wm8960_set_bias_level_out3(st
  		break;
  
  	case SND_SOC_BIAS_PREPARE:
@@ -8242,7 +8242,7 @@
  		if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
  			regcache_sync(wm8960->regmap);
  
-@@ -650,9 +728,13 @@
+@@ -650,9 +728,13 @@ static int wm8960_set_bias_level_out3(st
  
  		/* Set VMID to 2x250k */
  		snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x100);
@@ -8256,7 +8256,7 @@
  		/* Enable anti-pop features */
  		snd_soc_write(codec, WM8960_APOP1,
  			     WM8960_POBCTRL | WM8960_SOFT_ST |
-@@ -661,6 +743,7 @@
+@@ -661,6 +743,7 @@ static int wm8960_set_bias_level_out3(st
  		/* Disable VMID and VREF, let them discharge */
  		snd_soc_write(codec, WM8960_POWER1, 0);
  		msleep(600);
@@ -8264,7 +8264,7 @@
  		break;
  	}
  
-@@ -853,10 +936,15 @@
+@@ -853,10 +936,15 @@ static int wm8960_set_dai_pll(struct snd
  
  	if (pll_div.k) {
  		reg |= 0x20;
@@ -8281,7 +8281,7 @@
  	}
  	snd_soc_write(codec, WM8960_PLL1, reg);
  
-@@ -888,7 +976,11 @@
+@@ -888,7 +976,11 @@ static int wm8960_set_dai_clkdiv(struct
  		snd_soc_write(codec, WM8960_PLL1, reg | div);
  		break;
  	case WM8960_DCLKDIV:
@@ -8293,7 +8293,7 @@
  		snd_soc_write(codec, WM8960_CLOCK2, reg | div);
  		break;
  	case WM8960_TOCLKSEL:
-@@ -962,7 +1054,7 @@
+@@ -962,7 +1054,7 @@ static int wm8960_probe(struct snd_soc_c
  {
  	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
  	struct wm8960_data *pdata = dev_get_platdata(codec->dev);
@@ -8302,7 +8302,7 @@
  
  	wm8960->set_bias_level = wm8960_set_bias_level_out3;
  
-@@ -973,11 +1065,7 @@
+@@ -973,11 +1065,7 @@ static int wm8960_probe(struct snd_soc_c
  			wm8960->set_bias_level = wm8960_set_bias_level_capless;
  	}
  

target/linux/ramips/patches-3.18/0304-baud_250000.patch

@@ -1,6 +1,6 @@
 --- a/drivers/tty/serial/serial_core.c
 +++ b/drivers/tty/serial/serial_core.c
-@@ -356,6 +356,9 @@
+@@ -356,6 +356,9 @@ uart_get_baud_rate(struct uart_port *por
  	else if (flags == UPF_SPD_WARP)
  		altbaud = 460800;
  

target/linux/sunxi/patches-3.18/200-mmc-add-sdio-function-subnode.patch

@@ -49,7 +49,7 @@ Signed-off-by: Hans de Goede <[email protected]>
  	put_device(&card->dev);
 --- a/drivers/mmc/core/core.c
 +++ b/drivers/mmc/core/core.c
-@@ -1205,6 +1205,34 @@ EXPORT_SYMBOL(mmc_of_parse_voltage);
+@@ -1207,6 +1207,34 @@ EXPORT_SYMBOL(mmc_of_parse_voltage);
  
  #endif /* CONFIG_OF */
  

target/linux/x86/patches-3.18/001-x86-platform-Fix-Geode-LX-timekeeping-in-the-generic.patch

@@ -1,61 +0,0 @@
-From: David Woodhouse <[email protected]>
-Date: Thu, 17 Sep 2015 10:16:54 +0100
-Subject: [PATCH] x86/platform: Fix Geode LX timekeeping in the generic x86
- build
-
-In 2007, commit 07190a08eef36 ("Mark TSC on GeodeLX reliable")
-bypassed verification of the TSC on Geode LX. However, this code
-(now in the check_system_tsc_reliable() function in
-arch/x86/kernel/tsc.c) was only present if CONFIG_MGEODE_LX was
-set.
-
-OpenWRT has recently started building its generic Geode target
-for Geode GX, not LX, to include support for additional
-platforms. This broke the timekeeping on LX-based devices,
-because the TSC wasn't marked as reliable:
-https://dev.openwrt.org/ticket/20531
-
-By adding a runtime check on is_geode_lx(), we can also include
-the fix if CONFIG_MGEODEGX1 or CONFIG_X86_GENERIC are set, thus
-fixing the problem.
-
-Signed-off-by: David Woodhouse <[email protected]>
-Signed-off-by: Ingo Molnar <[email protected]>
-Closes #20531
----
-
---- a/arch/x86/kernel/tsc.c
-+++ b/arch/x86/kernel/tsc.c
-@@ -21,6 +21,7 @@
- #include <asm/hypervisor.h>
- #include <asm/nmi.h>
- #include <asm/x86_init.h>
-+#include <asm/geode.h>
- 
- unsigned int __read_mostly cpu_khz;	/* TSC clocks / usec, not used here */
- EXPORT_SYMBOL(cpu_khz);
-@@ -1004,15 +1005,17 @@ EXPORT_SYMBOL_GPL(mark_tsc_unstable);
- 
- static void __init check_system_tsc_reliable(void)
- {
--#ifdef CONFIG_MGEODE_LX
--	/* RTSC counts during suspend */
-+#if defined(CONFIG_MGEODEGX1) || defined(CONFIG_MGEODE_LX) || defined(CONFIG_X86_GENERIC)
-+	if (is_geode_lx()) {
-+		/* RTSC counts during suspend */
- #define RTSC_SUSP 0x100
--	unsigned long res_low, res_high;
-+		unsigned long res_low, res_high;
- 
--	rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
--	/* Geode_LX - the OLPC CPU has a very reliable TSC */
--	if (res_low & RTSC_SUSP)
--		tsc_clocksource_reliable = 1;
-+		rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
-+		/* Geode_LX - the OLPC CPU has a very reliable TSC */
-+		if (res_low & RTSC_SUSP)
-+			tsc_clocksource_reliable = 1;
-+	}
- #endif
- 	if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE))
- 		tsc_clocksource_reliable = 1;

target/linux/xburst/patches-3.18/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch

@@ -9,7 +9,7 @@ Subject: [PATCH 1/7] ubi: Read only the vid header instead of the whole page
 
 --- a/drivers/mtd/ubi/io.c
 +++ b/drivers/mtd/ubi/io.c
-@@ -1009,7 +1009,7 @@ int ubi_io_read_vid_hdr(struct ubi_devic
+@@ -1014,7 +1014,7 @@ int ubi_io_read_vid_hdr(struct ubi_devic
  
  	p = (char *)vid_hdr - ubi->vid_hdr_shift;
  	read_err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,