ramips: fix multi colour led handling

All boards either have a multi colour led or a single lightpipe. It
makes it impossible to handle the LEDs individual. Change the LED
config for these boards to take it into account.

Signed-off-by: Mathias Kresin <[email protected]>

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -298,9 +298,6 @@ mir3g)
 	ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08"
 	ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
 	;;
-miwifi-mini)
-	ucidef_set_led_default "power" "power" "$boardname:red:status" "1"
-	;;
 mlw221|\
 mlwg2)
 	set_wifi_led "$boardname:blue:wifi"
@@ -332,9 +329,6 @@ netgear,r6120)
 	ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt"
 	ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "phy1tpt"
 	;;
-newifi-d1)
-	set_usb_led "$boardname:red:status"
-	;;
 nw718)
 	set_usb_led "$boardname:amber:usb"
 	;;
@@ -359,11 +353,6 @@ d-team,newifi-d2)
 psg1208)
 	set_wifi_led "$boardname:white:wlan2g"
 	;;
-psg1218a|\
-psg1218b)
-	ucidef_set_led_netdev "Network" "Network" "$boardname:blue:status" "eth0"
-	ucidef_set_led_default "status" "STATUS" "$boardname:yellow:status" "0"
-	;;
 px-4885-4M|\
 px-4885-8M)
 	set_wifi_led "px-4885:orange:wifi"

target/linux/ramips/dts/MIWIFI-MINI.dts

@@ -23,16 +23,19 @@
 		led_blue: blue {
 			label = "miwifi-mini:blue:status";
 			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
 		};
 
 		yellow {
 			label = "miwifi-mini:yellow:status";
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
 		};
 
 		red {
 			label = "miwifi-mini:red:status";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
 		};
 	};
 

target/linux/ramips/dts/Newifi-D1.dts

@@ -28,16 +28,19 @@
 		status-red {
 			label = "newifi-d1:red:status";
 			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
 		};
 
 		status-green {
 			label = "newifi-d1:green:status";
 			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
 		};
 
 		led_blue: status-blue {
 			label = "newifi-d1:blue:status";
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+			default-state = "on";
 		};
 	};
 

target/linux/ramips/dts/PSG1218A.dts

@@ -15,16 +15,19 @@
 		led_blue: blue {
 			label = "psg1218a:blue:status";
 			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+			default-state = "on";
 		};
 
 		yellow {
 			label = "psg1218a:yellow:status";
 			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			default-state = "off";
 		};
 
 		red {
 			label = "psg1218a:red:status";
-				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
 		};
 	};
 };

target/linux/ramips/dts/PSG1218B.dts

@@ -15,16 +15,19 @@
 		led_blue: blue {
 			label = "psg1218b:blue:status";
 			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+			default-state = "on";
 		};
 
 		yellow {
 			label = "psg1218b:yellow:status";
 			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			default-state = "off";
 		};
 
 		red {
 			label = "psg1218b:red:status";
-				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
 		};
 	};
 };