ipq806x: fix pcie tx0-term-offset setting

Signed-off-by: Felix Fietkau <[email protected]>

SVN-Revision: 47543

target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch

@@ -40,7 +40,7 @@ Signed-off-by: Mathieu Olivari <[email protected]>
  			spi_pins: spi_pins {
  				mux {
  					pins = "gpio18", "gpio19", "gpio21";
-@@ -115,5 +133,19 @@
+@@ -115,5 +133,21 @@
  		usb30@1 {
  			status = "ok";
  		};
@@ -50,6 +50,7 @@ Signed-off-by: Mathieu Olivari <[email protected]>
 +			reset-gpio = <&qcom_pinmux 3 0>;
 +			pinctrl-0 = <&pcie0_pins>;
 +			pinctrl-names = "default";
++			phy-tx0-term-offset = <7>;
 +		};
 +
 +		pcie1: pci@1b700000 {
@@ -57,6 +58,7 @@ Signed-off-by: Mathieu Olivari <[email protected]>
 +			reset-gpio = <&qcom_pinmux 48 0>;
 +			pinctrl-0 = <&pcie1_pins>;
 +			pinctrl-names = "default";
++			phy-tx0-term-offset = <7>;
 +		};
  	};
  };

target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch

@@ -57,9 +57,9 @@ arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 36 ++++++++++++++++++++++++++++++++
  		};
  
  		gsbi@16300000 {
-@@ -147,5 +172,19 @@
- 			pinctrl-0 = <&pcie1_pins>;
+@@ -149,5 +174,19 @@
  			pinctrl-names = "default";
+ 			phy-tx0-term-offset = <7>;
  		};
 +
 +		nand@1ac00000 {

target/linux/ipq806x/patches-3.18/166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -181,6 +181,8 @@
+@@ -183,6 +183,8 @@
  
  			nand-ecc-strength = <4>;
  			nand-bus-width = <8>;

target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch

@@ -38,7 +38,7 @@ Signed-off-by: Mathieu Olivari <[email protected]>
  		};
  
  		gsbi@16300000 {
-@@ -184,6 +194,34 @@
+@@ -186,6 +196,34 @@
  
  			linux,part-probe = "qcom-smem";
  		};

target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch

@@ -29,7 +29,7 @@ Signed-off-by: Mathieu Olivari <[email protected]>
  		};
  
  		gsbi@16300000 {
-@@ -222,6 +232,27 @@
+@@ -224,6 +234,27 @@
  				reg = <4>;
  			};
  		};

target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch

@@ -40,7 +40,7 @@ Signed-off-by: Mathieu Olivari <[email protected]>
  			spi_pins: spi_pins {
  				mux {
  					pins = "gpio18", "gpio19", "gpio21";
-@@ -91,5 +109,19 @@
+@@ -91,5 +109,21 @@
  		sata@29000000 {
  			status = "ok";
  		};
@@ -50,6 +50,7 @@ Signed-off-by: Mathieu Olivari <[email protected]>
 +			reset-gpio = <&qcom_pinmux 3 0>;
 +			pinctrl-0 = <&pcie0_pins>;
 +			pinctrl-names = "default";
++			phy-tx0-term-offset = <7>;
 +		};
 +
 +		pcie1: pci@1b700000 {
@@ -57,6 +58,7 @@ Signed-off-by: Mathieu Olivari <[email protected]>
 +			reset-gpio = <&qcom_pinmux 48 0>;
 +			pinctrl-0 = <&pcie1_pins>;
 +			pinctrl-names = "default";
++			phy-tx0-term-offset = <7>;
 +		};
  	};
  };

target/linux/ipq806x/patches-4.1/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch

@@ -54,9 +54,9 @@ arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 36 ++++++++++++++++++++++++++++++++
  		};
  
  		gsbi@16300000 {
-@@ -123,5 +145,19 @@
- 			pinctrl-0 = <&pcie1_pins>;
+@@ -125,5 +147,19 @@
  			pinctrl-names = "default";
+ 			phy-tx0-term-offset = <7>;
  		};
 +
 +		nand@1ac00000 {

target/linux/ipq806x/patches-4.1/166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -154,6 +154,8 @@
+@@ -156,6 +156,8 @@
  
  			nand-ecc-strength = <4>;
  			nand-bus-width = <8>;

target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch

@@ -38,7 +38,7 @@ Signed-off-by: Mathieu Olivari <[email protected]>
  		};
  
  		gsbi@16300000 {
-@@ -157,6 +167,34 @@
+@@ -159,6 +169,34 @@
  
  			linux,part-probe = "qcom-smem";
  		};

target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch

@@ -29,7 +29,7 @@ Signed-off-by: Mathieu Olivari <[email protected]>
  		};
  
  		gsbi@16300000 {
-@@ -195,6 +205,27 @@
+@@ -197,6 +207,27 @@
  				reg = <4>;
  			};
  		};