|
|
@@ -0,0 +1,150 @@
|
|
|
+/*
|
|
|
+ * D-Link DIR-600 rev. A1 board support
|
|
|
+ *
|
|
|
+ * Copyright (C) 2010 Gabor Juhos <[email protected]>
|
|
|
+ *
|
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
|
+ * under the terms of the GNU General Public License version 2 as published
|
|
|
+ * by the Free Software Foundation.
|
|
|
+ */
|
|
|
+
|
|
|
+#include <linux/mtd/mtd.h>
|
|
|
+#include <linux/mtd/partitions.h>
|
|
|
+
|
|
|
+#include <asm/mach-ar71xx/ar71xx.h>
|
|
|
+
|
|
|
+#include "machtype.h"
|
|
|
+#include "devices.h"
|
|
|
+#include "dev-m25p80.h"
|
|
|
+#include "dev-ap91-pci.h"
|
|
|
+#include "dev-gpio-buttons.h"
|
|
|
+#include "dev-leds-gpio.h"
|
|
|
+
|
|
|
+#define DIR_600_A1_GPIO_LED_WPS 0
|
|
|
+#define DIR_600_A1_GPIO_LED_POWER_AMBER 1
|
|
|
+#define DIR_600_A1_GPIO_LED_POWER_GREEN 6
|
|
|
+
|
|
|
+#define DIR_600_A1_GPIO_BTN_RESET 8
|
|
|
+#define DIR_600_A1_GPIO_BTN_WPS 12
|
|
|
+
|
|
|
+#define DIR_600_A1_BUTTONS_POLL_INTERVAL 20
|
|
|
+
|
|
|
+#ifdef CONFIG_MTD_PARTITIONS
|
|
|
+static struct mtd_partition dir_600_a1_partitions[] = {
|
|
|
+ {
|
|
|
+ .name = "u-boot",
|
|
|
+ .offset = 0,
|
|
|
+ .size = 0x030000,
|
|
|
+ .mask_flags = MTD_WRITEABLE,
|
|
|
+ }, {
|
|
|
+ .name = "nvram",
|
|
|
+ .offset = 0x030000,
|
|
|
+ .size = 0x010000,
|
|
|
+ }, {
|
|
|
+ .name = "kernel",
|
|
|
+ .offset = 0x040000,
|
|
|
+ .size = 0x0e0000,
|
|
|
+ }, {
|
|
|
+ .name = "rootfs",
|
|
|
+ .offset = 0x120000,
|
|
|
+ .size = 0x2c0000,
|
|
|
+ }, {
|
|
|
+ .name = "mac",
|
|
|
+ .offset = 0x3e0000,
|
|
|
+ .size = 0x010000,
|
|
|
+ .mask_flags = MTD_WRITEABLE,
|
|
|
+ }, {
|
|
|
+ .name = "art",
|
|
|
+ .offset = 0x3f0000,
|
|
|
+ .size = 0x010000,
|
|
|
+ .mask_flags = MTD_WRITEABLE,
|
|
|
+ }, {
|
|
|
+ .name = "firmware",
|
|
|
+ .offset = 0x040000,
|
|
|
+ .size = 0x3a0000,
|
|
|
+ }
|
|
|
+};
|
|
|
+#endif /* CONFIG_MTD_PARTITIONS */
|
|
|
+
|
|
|
+static struct flash_platform_data dir_600_a1_flash_data = {
|
|
|
+#ifdef CONFIG_MTD_PARTITIONS
|
|
|
+ .parts = dir_600_a1_partitions,
|
|
|
+ .nr_parts = ARRAY_SIZE(dir_600_a1_partitions),
|
|
|
+#endif
|
|
|
+};
|
|
|
+
|
|
|
+static struct gpio_led dir_600_a1_leds_gpio[] __initdata = {
|
|
|
+ {
|
|
|
+ .name = "dir-600-a1:green:power",
|
|
|
+ .gpio = DIR_600_A1_GPIO_LED_POWER_GREEN,
|
|
|
+ }, {
|
|
|
+ .name = "dir-600-a1:amber:power",
|
|
|
+ .gpio = DIR_600_A1_GPIO_LED_POWER_AMBER,
|
|
|
+ }, {
|
|
|
+ .name = "dir-600-a1:blue:wps",
|
|
|
+ .gpio = DIR_600_A1_GPIO_LED_WPS,
|
|
|
+ .active_low = 1,
|
|
|
+ }
|
|
|
+};
|
|
|
+
|
|
|
+static struct gpio_button dir_600_a1_gpio_buttons[] __initdata = {
|
|
|
+ {
|
|
|
+ .desc = "reset",
|
|
|
+ .type = EV_KEY,
|
|
|
+ .code = BTN_0,
|
|
|
+ .threshold = 5,
|
|
|
+ .gpio = DIR_600_A1_GPIO_BTN_RESET,
|
|
|
+ .active_low = 1,
|
|
|
+ }, {
|
|
|
+ .desc = "wps",
|
|
|
+ .type = EV_KEY,
|
|
|
+ .code = BTN_1,
|
|
|
+ .threshold = 5,
|
|
|
+ .gpio = DIR_600_A1_GPIO_BTN_WPS,
|
|
|
+ .active_low = 1,
|
|
|
+ }
|
|
|
+};
|
|
|
+
|
|
|
+static void __init dir_600_a1_setup(void)
|
|
|
+{
|
|
|
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
|
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
|
|
+
|
|
|
+ ar71xx_set_mac_base(mac);
|
|
|
+ ar71xx_add_device_mdio(0x0);
|
|
|
+
|
|
|
+ /* WAN port */
|
|
|
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
|
|
|
+ ar71xx_eth0_data.phy_mask = 0x0;
|
|
|
+ ar71xx_eth0_data.speed = SPEED_100;
|
|
|
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
|
|
|
+ ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
|
|
|
+ ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
|
|
|
+ ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
|
|
|
+
|
|
|
+ /* LAN ports */
|
|
|
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
|
|
|
+ ar71xx_eth1_data.phy_mask = 0x0;
|
|
|
+ ar71xx_eth1_data.speed = SPEED_1000;
|
|
|
+ ar71xx_eth1_data.duplex = DUPLEX_FULL;
|
|
|
+ ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
|
|
|
+ ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
|
|
|
+ ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
|
|
|
+
|
|
|
+ ar71xx_add_device_eth(1);
|
|
|
+ ar71xx_add_device_eth(0);
|
|
|
+
|
|
|
+ ar71xx_add_device_m25p80(&dir_600_a1_flash_data);
|
|
|
+
|
|
|
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
|
|
|
+ dir_600_a1_leds_gpio);
|
|
|
+
|
|
|
+ ar71xx_add_device_gpio_buttons(-1, DIR_600_A1_BUTTONS_POLL_INTERVAL,
|
|
|
+ ARRAY_SIZE(dir_600_a1_gpio_buttons),
|
|
|
+ dir_600_a1_gpio_buttons);
|
|
|
+
|
|
|
+ ap91_pci_init(ee, NULL);
|
|
|
+}
|
|
|
+
|
|
|
+MIPS_MACHINE(AR71XX_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1",
|
|
|
+ dir_600_a1_setup);
|
Gabor Juhos