qca-ssdk: drop not used Malibu PHY patch

Now that Malibu (QCA807x) PHY-s use an upstream driver we dont need support
for defining address of the first PHY in the package so drop the patch.

Signed-off-by: Robert Marko <[email protected]>

package/kernel/qca-ssdk/patches/100-malibu-phy-add-support-for-manual-define-of-first-ph.patch

@@ -1,131 +0,0 @@
-From a651d10fbd880098d7b98dee27dfd1eb15146fb2 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <[email protected]>
-Date: Sun, 12 Nov 2023 18:40:22 +0100
-Subject: [PATCH] malibu-phy: add support for manual define of first phy addr
-
-The usage of first_phy_addr is EXTREMELY FRAGILE and results
-in dangerous results if the OEM (or anyone that by chance try to
-implement things in a logical manner) deviates from the default values
-from the "magical template".
-
-To be in more details. With QSDK 12.4, some tweaks were done to improve
-autoneg and now on every call of port status, the phydev is tried to
-add. This resulted in the call and log spam of an error with ports that
-are actually not present on the system with qsdk reporting phydev is
-NULL. This itself is not an error and printing the error is correct.
-
-What is actually an error from ages is setting generic bitmap reporting
-presence of port that are actually not present. This is very common on
-OEM where the switch_lan_bmp is always a variant of 0x1e (that on bitmap
-results in PORT1 PORT2 PORT3 PORT4 present) or 0x3e (PORT1 PORT2 PORT3
-PORT4 PORT5). Reality is that many device are used as AP with one LAN
-port or one WAN port. (or even exotic configuration with PORT1 not
-present and PORT2 PORT3 PORT4 present (Xiaomi 3600)
-
-With this finding one can say... ok nice, then lets update the DT and
-set the correct bitmap...
-
-Again world is a bad place and reality is that this cause wonderful
-regression in some case of by extreme luck the first ever connected
-port working and the rest of the switch dead.
-
-The problem has been bisected to all the device that doesn't have the
-PORT1 declared in any of the bitmap.
-
-With this prefaction in mind, on to the REAL problem.
-
-malibu_phy_hw_init FOR SOME REASON, set a global variable first_phy_addr
-to the first detected PHY addr that coincidentally is always PORT1.
-PORT1 addr is 0x0. The entire code in malibu_phy use this variable to
-derive the phy addrs in some function.
-
-Declaring a bitmap where the PORT1 is missing (or worse PORT4 the only
-one connected) result in first_phy_addr set to 1 or whatever phy addr is
-detected first setting wrong value all over the init stage.
-
-To fix this, introduce a new binding malibu_first_phy_addr to manually
-declare the first phy that the malibu PHY driver should use and permit
-to detach it from port bmp detection. The legacy detection is kept for
-compatibility reason.
-
-Signed-off-by: Christian Marangi <[email protected]>
----
- include/init/ssdk_dts.h  |  1 +
- include/init/ssdk_init.h |  2 ++
- src/hsl/phy/malibu_phy.c |  5 +++++
- src/init/ssdk_dts.c      | 15 +++++++++++++++
- 4 files changed, 23 insertions(+)
-
---- a/include/init/ssdk_dts.h
-+++ b/include/init/ssdk_dts.h
-@@ -146,6 +146,7 @@ a_uint32_t ssdk_wan_bmp_get(a_uint32_t d
- sw_error_t ssdk_lan_bmp_set(a_uint32_t dev_id, a_uint32_t lan_bmp);
- sw_error_t ssdk_wan_bmp_set(a_uint32_t dev_id, a_uint32_t wan_bmp);
- a_uint32_t ssdk_inner_bmp_get(a_uint32_t dev_id);
-+a_uint32_t ssdk_malibu_first_phy_addr_get(a_uint32_t dev_id);
- hsl_reg_mode ssdk_switch_reg_access_mode_get(a_uint32_t dev_id);
- void ssdk_switch_reg_map_info_get(a_uint32_t dev_id, ssdk_reg_map_info *info);
- a_uint32_t ssdk_switch_pcie_base_get(a_uint32_t dev_id);
---- a/include/init/ssdk_init.h
-+++ b/include/init/ssdk_init.h
-@@ -194,6 +194,7 @@ enum ssdk_port_wrapper_cfg {
- 		a_uint32_t lan_bmp;
- 		a_uint32_t wan_bmp;
- 		a_uint32_t inner_bmp;
-+		a_uint32_t malibu_first_phy_addr;
- 	} ssdk_port_cfg;
- 
- 	typedef struct
-@@ -384,6 +385,7 @@ ssdk_hsl_access_mode_set(a_uint32_t dev_
- 
- a_uint32_t ssdk_dt_global_get_mac_mode(a_uint32_t dev_id, a_uint32_t index);
- a_uint32_t ssdk_dt_global_set_mac_mode(a_uint32_t dev_id, a_uint32_t index, a_uint32_t mode);
-+a_uint32_t ssdk_malibu_first_phy_addr_get(a_uint32_t dev_id);
- 
- a_uint32_t
- qca_hppe_port_mac_type_get(a_uint32_t dev_id, a_uint32_t port_id);
---- a/src/hsl/phy/malibu_phy.c
-+++ b/src/hsl/phy/malibu_phy.c
-@@ -1945,6 +1945,11 @@ static int malibu_phy_api_ops_init(void)
- int malibu_phy_init(a_uint32_t dev_id, a_uint32_t port_bmp)
- {
- 	static a_uint32_t phy_ops_flag = 0;
-+	a_uint32_t malibu_first_phy_addr;
-+
-+	malibu_first_phy_addr = ssdk_malibu_first_phy_addr_get(dev_id);
-+	if (malibu_first_phy_addr != MAX_PHY_ADDR)
-+		first_phy_addr = malibu_first_phy_addr;
- 
- 	if(phy_ops_flag == 0) {
- 		malibu_phy_api_ops_init();
---- a/src/init/ssdk_dts.c
-+++ b/src/init/ssdk_dts.c
-@@ -186,6 +186,13 @@ a_uint32_t ssdk_inner_bmp_get(a_uint32_t
- 	return cfg->port_cfg.inner_bmp;
- }
- 
-+a_uint32_t ssdk_malibu_first_phy_addr_get(a_uint32_t dev_id)
-+{
-+	ssdk_dt_cfg* cfg = ssdk_dt_global.ssdk_dt_switch_nodes[dev_id];
-+
-+	return cfg->port_cfg.malibu_first_phy_addr;
-+}
-+
- hsl_reg_mode ssdk_switch_reg_access_mode_get(a_uint32_t dev_id)
- {
- 	ssdk_dt_cfg* cfg = ssdk_dt_global.ssdk_dt_switch_nodes[dev_id];
-@@ -1039,6 +1046,14 @@ static void ssdk_dt_parse_port_bmp(a_uin
- 				cfg->port_cfg.inner_bmp;
- 	}
- 
-+	/* Permit to manually declare start phy addr for malibu PHY. If not found set to legacy detection. */
-+	if (!of_property_read_u32(switch_node, "malibu_first_phy_addr", &cfg->port_cfg.malibu_first_phy_addr)) {
-+		ssdk_dt_global.ssdk_dt_switch_nodes[dev_id]->port_cfg.malibu_first_phy_addr =
-+				cfg->port_cfg.malibu_first_phy_addr;
-+	} else {
-+		ssdk_dt_global.ssdk_dt_switch_nodes[dev_id]->port_cfg.malibu_first_phy_addr = MAX_PHY_ADDR;
-+	}
-+
- 	ssdk_dt_global.ssdk_dt_switch_nodes[dev_id]->port_cfg.cpu_bmp = cfg->port_cfg.cpu_bmp;
- 	ssdk_dt_global.ssdk_dt_switch_nodes[dev_id]->port_cfg.lan_bmp = cfg->port_cfg.lan_bmp;
- 	ssdk_dt_global.ssdk_dt_switch_nodes[dev_id]->port_cfg.wan_bmp = cfg->port_cfg.wan_bmp;