mediatek: cosmetic fixes for mt7629-lynx-rfb

This patch did the following things:
1. rename device compatible string
2. add earlycon into cmdline
3. add mac address location according to mt7629 eeprom layout
4. rename mtd partitions
5. replace spaces for indentation with tabs

Signed-off-by: Chuanhong Guo <[email protected]>

target/linux/mediatek/files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts

@@ -10,7 +10,7 @@
 
 / {
 	model = "MediaTek MT7629 reference board";
-	compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
+	compatible = "mediatek,mt7629-lynx-rfb", "mediatek,mt7629";
 
 	aliases {
 		serial0 = &uart0;
@@ -18,6 +18,7 @@
 
 	chosen {
 		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000";
 	};
 
 	gpio-keys {
@@ -68,36 +69,38 @@
 };
 
 &eth {
-        pinctrl-names = "default";
-        pinctrl-0 = <&ephy_leds_pins>;
-        status = "okay";
-
-        gmac0: mac@0 {
-                compatible = "mediatek,eth-mac";
-                reg = <0>;
-                phy-mode = "sgmii";
-                fixed-link {
-                        speed = <1000>;
-                        full-duplex;
-                        pause;
-                };
-        };
-
-        gmac1: mac@1 {
-                compatible = "mediatek,eth-mac";
-                reg = <1>;
-                phy-handle = <&phy0>;
-        };
-
-        mdio: mdio-bus {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                phy0: ethernet-phy@0 {
-                        reg = <0>;
-                        phy-mode = "gmii";
-                };
-        };
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_leds_pins>;
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		mtd-mac-address = <&factory 0x2a>;
+		phy-mode = "sgmii";
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		mtd-mac-address = <&factory 0x24>;
+		phy-handle = <&phy0>;
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "gmii";
+		};
+	};
 };
 
 &gsw {
@@ -153,13 +156,13 @@
 			};
 
 			factory: partition@70000 {
-				label = "Factory";
+				label = "factory";
 				reg = <0x70000 0x40000>;
 				read-only;
 			};
 
 			partition@b0000 {
-				label = "Kernel";
+				label = "firmware";
 				reg = <0xb0000 0xb50000>;
 			};
 		};