dnsmasq: dnssec time handling uses ntpd hotplug

Change dnsmasq's dnssec time check handling to use time validity
indicated by ntpd rather than maintaining a cross boot/upgrade
/etc/dnsmasq.time timestamp file.  This saves flash device wear.

If ntpd client is configured in uci and you're using dnssec, then
dnsmasq will not check dnssec timestamp validity until ntpd hotplug
indicates sync via a stratum change. The ntpd hotplug leaves a status
flag file to indicate to dnsmasq.init that time is valid and that it
should now start in 'check dnssec timestamp valid' mode.

If ntpd client is not configured and you're using dnssec, then it is
presumed you're using an alternate time sync mechanism and that time is
correct, thus dnsmasq checks dnssec timestamps are valid from 1st start.

Signed-off-by: Kevin Darbyshire-Bryant <[email protected]>

V2 - stratum & step ntp changes indicate time is valid
V3 - on initial flag file step signal dnsmasq with SIGHUP if running
V4 - only accept step ntp changes. Accepting both stratum & step could
result in unpleasant script race conditions
V5 - Actually only accepting stratum is the correct thing to do after
further testing
V6 - improve handling of non busybox ntpd
if sysntpd not executable
  dnsmasq checks dnssec timestamps
else
  sysntp script disabled - look for timestamp file - allows external mechanism to use hotplug flag file
  sysntp script enabled & uci ntp enabled  - look for timestamp file
  sysntp script enabled & uci ntp disabled - dnsmasq checks dnssec
timestamps
fi

package/network/services/dnsmasq/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dnsmasq
 PKG_VERSION:=2.76
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=http://thekelleys.org.uk/dnsmasq
@@ -142,6 +142,8 @@ define Package/dnsmasq/install
 	$(INSTALL_BIN) ./files/dnsmasq.init $(1)/etc/init.d/dnsmasq
 	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
 	$(INSTALL_DATA) ./files/dnsmasq.hotplug $(1)/etc/hotplug.d/iface/25-dnsmasq
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/ntp
+	$(INSTALL_DATA) ./files/dnsmasqsec.hotplug $(1)/etc/hotplug.d/ntp/25-dnsmasqsec
 endef
 
 Package/dnsmasq-dhcpv6/install = $(Package/dnsmasq/install)
@@ -151,8 +153,6 @@ $(call Package/dnsmasq/install,$(1))
 ifneq ($(CONFIG_PACKAGE_dnsmasq_full_dnssec),)
 	$(INSTALL_DIR) $(1)/usr/share/dnsmasq
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/trust-anchors.conf $(1)/usr/share/dnsmasq
-	$(INSTALL_DIR) $(1)/lib/upgrade
-	$(INSTALL_BIN) ./files/dnsmasqsec-add-conffiles.sh $(1)/lib/upgrade
 endif
 endef
 

package/network/services/dnsmasq/files/dnsmasq.init

@@ -16,6 +16,7 @@ CONFIGFILE="/var/etc/dnsmasq.conf"
 HOSTFILE="/tmp/hosts/dhcp"
 TRUSTANCHORSFILE="/usr/share/dnsmasq/trust-anchors.conf"
 TIMESTAMPFILE="/etc/dnsmasq.time"
+TIMEVALIDFILE="/var/state/dnsmasqsec"
 
 xappend() {
 	local value="$1"
@@ -235,7 +236,12 @@ dnsmasq() {
 	[ "$dnssec" -gt 0 ] && {
 		xappend "--conf-file=$TRUSTANCHORSFILE"
 		xappend "--dnssec"
-		xappend "--dnssec-timestamp=$TIMESTAMPFILE"
+		[ -x /etc/init.d/sysntpd ] && {
+			/etc/init.d/sysntpd enabled
+			[ "$?" -ne 0 -o "$(uci_get system.ntp.enabled)" = "1" ] && {
+				[ -f "$TIMEVALIDFILE" ] || xappend "--dnssec-no-timecheck"
+			}
+		}
 		append_bool "$cfg" dnsseccheckunsigned "--dnssec-check-unsigned"
 	}
 
@@ -627,10 +633,7 @@ start_service() {
 	mkdir -p /var/lib/misc
 	touch /tmp/dhcp.leases
 
-	if [ ! -f "$TIMESTAMPFILE" ]; then
-		touch "$TIMESTAMPFILE"
-		chown dnsmasq.dnsmasq "$TIMESTAMPFILE"
-	fi
+	[ -f "$TIMESTAMPFILE" ] && rm -f "$TIMESTAMPFILE"
 
 	echo "# auto-generated config file from /etc/config/dhcp" > $CONFIGFILE
 	echo "# auto-generated config file from /etc/config/dhcp" > $HOSTFILE
@@ -709,7 +712,7 @@ start_service() {
 
 	procd_add_jail dnsmasq ubus log
 	procd_add_jail_mount $CONFIGFILE $TRUSTANCHORSFILE $HOSTFILE /etc/passwd /etc/group /etc/TZ /dev/null /dev/urandom /etc/dnsmasq.conf /tmp/dnsmasq.d /tmp/resolv.conf.auto /etc/hosts /etc/ethers $EXTRA_MOUNT
-	procd_add_jail_mount_rw /var/run/dnsmasq/ /tmp/dhcp.leases $TIMESTAMPFILE
+	procd_add_jail_mount_rw /var/run/dnsmasq/ /tmp/dhcp.leases
 
 	procd_close_instance
 }

package/network/services/dnsmasq/files/dnsmasqsec-add-conffiles.sh

@@ -1,16 +0,0 @@
-add_dnsmasqsec_conffiles()
-{
-	local filelist="$1"
-
-	# do NOT include timestamp in a backup, only system upgrade
-	# dnsmasq restart ensures file timestamp is up to date
-	if [ -z $NEED_IMAGE ]; then
-		if [ $(ubus call service list '{"name":"dnsmasq"}' | jsonfilter -e '@.*.instances.instance1.running') = "true" ]; then
-			/etc/init.d/dnsmasq restart
-			sleep 1
-			echo "/etc/dnsmasq.time" >>$filelist
-		fi
-	fi
-}
-
-sysupgrade_init_conffiles="$sysupgrade_init_conffiles add_dnsmasqsec_conffiles"

package/network/services/dnsmasq/files/dnsmasqsec.hotplug

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+TIMEVALIDFILE="/var/state/dnsmasqsec"
+
+[ "$ACTION" = stratum ] || exit 0
+
+[ -f "$TIMEVALIDFILE" ] || {
+	echo "ntpd says time is valid" >$TIMEVALIDFILE
+	/etc/init.d/dnsmasq enabled && {
+		pid=$(pidof dnsmasq)
+		[ "$(readlink /proc/$pid/exe)" = "/usr/sbin/dnsmasq" ] && kill -SIGHUP $pid \
+		|| /etc/init.d/dnsmasq restart
+	}
+}